Think you need a relatively long case-neck for good accuracy? Think again. Stan Ware broke all the rules with his radical Wolfpup cartridge, proving that a near-no-neck design can deliver match-winning accuracy. Read on to learn how the Wolfpup works…
Retired gunsmith Stan Ware is a talented shooter who’s not afraid to think “outside the box”. Stan competes in both Hunter Benchrest (HBR) and Varmint for Score (VFS) disciplines. In his quest to build the ultimate Hunter Benchrest cartridge, Stan created the radical “Wolfpup” wildcat, based on a 6mmBR parent case. Noting the dominance of 30 BRs in VFS matches, Stan wondered if a stretched 30 BR could work in HBR competition. The challenge was case capacity. Under HBR rules the cartridge must hold at least 45.0 grains of water, equal to the capacity of the classic 30/30 case.
To get the requisite HBR case capacity, Stan figured he needed to boost the volume of a 30 BR case significantly, so he would have to move the shoulder forward — a lot. He did this by running a 30 BR reamer deeper and deeper, test-firing brass along the way. After three reamer passes, he ended up with the capacity he needed (the Wolfpup holds 45.3 grains of water). But then he looked at the finished product — a case with almost no neck, and he wondered “how could this possibly work?”.
From Trashbin to Winner’s Circle
Ware’s prototype Wolfpup ended up so short-necked, so unlike any “normal” cartridge, that Stan figured it was “dead on arrival”. Stan told us: “I said ‘this ain’t going to work’ and I threw the brass in the trash can. Honest. But later I thought I better shoot it and see what it does.” There was one problem — Stan didn’t have a seating die. He noticed the short neck provided a bit of tension after fire-forming, so he literally seated some bullets, BIB 118s and 125s, with his fingers. For powder he used H4198 and started with 35 grains, one grain more than a 30 BR load. Stan then did a pressure work-up: “I actually went up to 41.0 grains and didn’t have a sticky bolt. I ended up at 37.9 grains of Hodgdon 4198 — that gave 3150 fps, where the sweet spot is.” (Later testing revealed a second accuracy node at about 3020 fps, using 36.4 grains of H4198).
Stan’s radical short-necked Wolfpup shot great from the get-go. Once he found the right velocity node, the gun shot in the ones and zeros with both 7-ogive and 10-ogive bullets, both 118s and 125s. The Wolfpup proved easy to tune — it’s not finicky at all. And it’s a winner. Stan began shooting the Wolfpup in 2006 in both VFS and HBR matches and the ‘Pup’ started winning matches right away. In 2007, Stan won the Wisconsin State VFS Championship shooting the Wolfpup. In June 2010 at a Webster City, Iowa VFS match, Stan won the Grand Agg and posted high X-Count for the match, while placing first at 100 yards and second at 200 yards. How’s that for a cartridge that almost ended up in the trash bin?
Does Stan deserve an award for “most innovative benchrest cartridge design”? Stan chuckles at that notion: “I’m not a hero, not a genius. I really didn’t do anything. The fun part is thinking outside the box — for me anyway. Shooting is an age-old process of experimentation. You never learn it all.”
Why Does It Work?
How can such a radical case design perform so well? “That’s a good question,” Stan admitted. He then explained: “The 30 BR is inherently accurate, so I figured something based on the 30 BR should be accurate too. My personal belief is that the short neck doesn’t hurt you. Plus if the throat in the barrel is straight, the bullet can self-align. If the chamber is good, the bullet will self-center in the throat. In a regular case there’s not much room to do that, so a bullet can start off-center, and you don’t get the same results every time. A bullet in a conventional case is stopped from self-centering by the stiffer neck, particularly in a tight-clearance BR gun.”
Reloading the .30 Wolfpup
Stan’s Wolfpup chamber has a neck dimension of 0.330″. He turns his necks for a 0.327″ loaded round. Bullets are jammed .020″ forward of first contact with the lands. When he closes the bolt it pushes the bullet back in the case — almost a soft seat. Stan notes: “To start with I normally bump the shoulder .0005-.001″ so they go in easy. Just by doing that I get a little neck tension. I also use a bushing. Right now I’m running a .322, but it’s not particularly sensitive. I’ve tried one-thousandths increments up to a .325 bushing and couldn’t tell a lot of difference.” For bullet seating, Stan uses a Wilson 30 BR seater die into which he ran the chamber reamer. This gives perfect case fit during seating operations.
About the Illustrated Gunstock
You’ll notice Stan’s stock contains scenes from Vietnam and a quotation. Here’s the story. A Vietnam combat veteran, Stan served “in-country” with the Army’s 509th Non-Divisional Combat Unit (out of Fort Riley) from 1965-1966. Shortly before he left Vietnam, Stan went to a shop to have a souvenir lighter engraved. He asked the vendor for an appropriate inscription. The shop’s metal-worker engraved: “War is a tragedy. It takes mans’ best to do mans’ worst.” That message, along with the combat scenes, were hand-painted on Stan’s rifle by his wife Susan, a talented artist. She spent more than 20 hours painting the rifle stock.
On September 20-24, 2017, the CMP New England Games will take place in a scenic corner of Vermont (check out that photo above — is that nice or what?). Hosted by the Vermont State Rifle and Pistol Association and the Burlington Rifle and Pistol Club, the New England Games will be conducted at the Camp Ethan Allen Training Site, a beautiful facility.
Registration is currently open. Competitors are encouraged to register right away, though interested shooters will also be able to register for additional matches while attending the event. Last year, over 150 competitors shot in the inaugural New England Games. This year the number may top 200. The New England Games have become extremely popular for the breathtaking views and serene environment. Add in the new electronic target system and you have a recipe for success.
The 2017 New England Games will feature the CMP’s electronic High Power targets. Thus far in 2017, this mobile target system was used during the Oklahoma Games in April, the Eastern Games in May, and at Camp Perry in June. The electronic target system is now well-sorted and provides accurate scoring. Shooters have monitors right at their shooting stations, providing instant scoring info — no more waiting for the targets to be marked manually. And with the elimination of pit duty allowed by the target system, matches are completed in a shorter amount of time.
Here’s the view from the berm, looking back to the firing line…
The 2017 New England CMP Games will include a GSM New Shooter Clinic and a Small Arms Firing School (SAFS), led by certified instructors. No previous firearm experience is required for SAFS. Students participating in the clinic will learn gun safety, target shooting skills, positioning, and basic rifle mechanics. Then they will participate in a true M16 EIC match. The CMP provides ammunition and a rifle during the Rifle SAFS.
Similar to the Eastern, Western, and Oklahoma CMP Travel games, the New England Games features a variety of competitive shooting matches including: Garand/Springfield/Vintage andModern Military Match, As-Issued 1911 Pistol Match, EIC Pistol Match, .22 Rimfire Pistol Match, Rimfire Sporter Match, M1 Carbine Match, and Vintage Sniper Match, along with the regular High Power competitions.
Competitors Praise Venue and Match
Competitors at last year’s inaugural CMP New England Game were mightily impressed by Camp Ethan Allen, a beautiful venue. “I was blown away by the facilities at Camp Ethan Allen,” said Steve Cooper, CMP North general manger. “The grounds were neatly manicured, our offices for registration and sales were very convenient and the classrooms were perfect for our clinics.”
He went on to say, “As beautiful as the surroundings were, the people were even better. They truly wanted us there and they enjoyed the matches, clinics, and other activities. It will be a pleasure to return next year for an even bigger and better event.” Photos from the 2016 event are posted on the CMP’s Zenfolio website.
Many awards will be earned at the 2017 New England Games…
Of course, it wouldn’t be a true CMP Games event without a Rimfire Sporter Match.
The CEATS Pistol Range hosted both centerfire and rimfire matches in a lovely, tree-lined setting.
Learn More about the CMP New England Games
For registration, travel, and housing information, visit the New England Games Page on the CMP website. If you have questions, Contact Christina Roguski at 419-635-2141 ext. 714, or email competitions [at] thecmp.org.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. CDNN — Browning A-Bolt III Composite Stalker, $349.99 NET
Hunting season is coming soon. Here’s a rifle with a smooth three-lug action and good trigger that can take any game in North America. The Browning A-Bolt III is justifiably respected as a solid hunting rifle. This AB3 Composite Stalker model, with a synthetic stock blued barreled action, normally retails for $600.00+. Now it’s on sale for under $449.99. What’s more, Browning is currently offering a $100.00 Browning Bucks Rebate for any Browning firearm purchased before September 30, 2017. That drops your net cost for this hunting rifle to just $349.99.
Chose your favorite short-action or long-action cartridge. Available chamberings at this price include: .243 Win, 6.5 Creedmoor, .270 Win, 7mm-08, 7mm Rem Mag, .308 Win, .300 WSM, .30-06 Sprg, 300 Win Mag. The .270 Win and .30-06 versions are also available with Realtree Xtra Camo (above) for the same $349.99 after-rebate price.
2. Natchez — Leupold VX-6 Scopes Closeout, Save Hundreds
Looking for a good scope for your hunting rifle? Natchez Shooters Supplies is running a big sale on Leupold VX-6 scopes. You can save hundreds of dollars on a wide variety of VX-6 optics, from 1-6x24mm up to 3-18x50mm models. If you are looking for a high-quality hunting optic at a great price check out these deals. For example, Leupold’s 2-12x42mm Illum. FireDot LR Duplex model is marked down from $1039.50 to just $749.99 — a 28% savings! Shown above are four hot deals, but a dozen Leupold VX-6 models on are sale now.
3. Bruno’s — Big Labor Day Sale on (Nearly) Everything In Stock
Celebrate Labor Day with big savings. Bullets, brass, powder, optics, dies, tools, stocks, barrels, actions — all this and more is on sale at Bruno Shooters Supply right now. You’ll find savings on pretty much everything Bruno’s sells (except MAP-price items). But you have to act quickly. This storewide sale ends tomorrow, 9/5/2017 at 11:59 PM. You snooze, you loose. NOTE: You don’t need a special discount code — the sale prices are already shown online. This Sale runs through Tuesday, September 5 at 11:59 PM MST. No Back-orders with sale pricing.
4. Midway USA — Camo Tuesday Sales on Hunting Gear
This year, MidwayUSA’s 6th Annual Camo Tuesday™ will feature deep discounts on select MidwayUSA hunting clothing, footwear, ammunition, optics and more from brands like Irish Setter, Federal, and Vortex just to name a few. “Camo Tuesday [is] Black Friday for the hunter and marks the first official shopping day of the fall hunting season,” said Jeff Larkin, VP Marketing. “This year’s Camo Tuesday event … will be bigger and better than ever with some really great products from top brands at unbelievable prices!” Head over to MidwayUSA.com on September 5th to take advantage of the great deals. You can also enter the 2017 Camo Tuesday Sweepstakes with a Hunting Clothing Package prize.
5. Amazon — Sig Kilo 1250 Rangefinder, $199.99
Hunting season is coming soon. That means going through your gear check-list before you head to deer country. If you don’t have a quality, compact Laser Rangefinder, here’s a great deal. The 6x20mm SIG Kilo 1250 Camo Rangefinder is now on sale for under $200.00. This is a very accurate LRF, that ranges deer-sized targets at long distances quickly. The scan mode is very fast (4X per second) and this offers both line of sight (LOS) or angle modified range (AMR). The unit is compact and light — a bonus for hunters. There are more expensive Laser Rangefinder that can range farther, but this $199.99 Kilo 1250 will definitely do the job on a hunting trip for one-third the price.
6. Midsouth — All Hazmat Fees Reduced to $19.99 (up to 50 lbs.)
UPDATE: Midsouth Has Extended this offer through Saturday, Sept. 9, 2017 at 11:59 PM!
Some online vendors bill up to $40.00 per shipment for Hazardous Materials Charges, the notorious “HAZMAT FEE”. As a Labor Day weekend special, Midsouth has reduced its Hazmat Fee to just $19.99 per shipment, for any combination of powders and primers up to 50 pounds in weight. And yes, you can combine powder and primers in the same order, to ship both with one $19.99 hazmat fee. Right now is a good time to buy. Midsouth has a good selection of most popular powders (though Hodgdon H4350 and Alliant Reloder 16 are still back-ordered).
7. Powder Valley — $10 Off $100 Orders (with eMail Sign-Up)
Save ten bucks on your next powder order from Powder Valley Inc., one of the most respected vendors of powder, primers, bullets, and brass in the businesses. Simply subscribe to Powder Valley’s newsletter to earn your $10 Savings. As a subscriber, you’ll get timely tips on sales, and product arrivals — such as the latest shipment of Lapua 6.5 Creedmoor brass. Powder Valley has long had some of the most competitive pricing on reloading components.
8. Amazon — Motion-Sensitive Interior Light for Gun Safes, $9.95
Let there be light. Here’s a great accessory for your Gun Safe. This “smart” LED lamp turns itself on when you open the door, and off when you close the door. There’s a built-in magnet so you can easily attach the light to the inner walls or “ceiling” of your gun safe. It works, it’s handy, and it’s inexpensive — just $9.99 with free shipping for Prime members (or otherwise free shipping for $25+ orders). We bought two for our own firearms vault. This can provide 14 hours of light with three AA batteries (not included). Very versatile, these motion-sensor lamps can also be used in closets.
9. Amazon — Mystery Deal of the Week, 30% Off Normal Price
We’re adding something new to our Weekly Bargain Round-Up — a Mystery Deal of the Week. This will be a high-quality item that has 4+ star user reviews, and is selling at least 25% off the normal price. The item this week is under $100.00 and is an outstanding value. It works as well as competitive products costing $220 or more. HINT: This Mystery Deal item will be handy for all rifle shooters traveling to and from a range. Above is a recent price chart. You can see this is a super value right now. CLICK HERE to see the Mystery Deal.
Report and Photos courtesy NRABlog.com
The first-ever NRA Carry Guard Expo was held August 25-27, 2017 at the Wisconsin Center in Milwaukee. More than 14,000 visitors attend the Expo, billed as the ultimate assembly of education, training, and products dedicated to concealed carry, personal protection, and home defense. While this is not a handgun-focused website, we know that many of our readers have carry permits, and probably the vast majority own a pistol or two.
At the Expo, over 160 Exhibitors displayed their latest product lines for concealed carry, personal protection and home defense. The exhibit floor spread across nearly 100,000 square feet of the Wisconsin Center.
The Carry Guard Expo hosted 124 seminars with more than 6,400 guests participating in a variety of teaching/learning sessions. Seminar topics included: home defense, active threat protection, concealed carry tactics and much more.
Concealed Carry Permit Seminar
One Expo highlight was a seminar which covered the Utah Concealed Carry Weapon Course. Utah’s Concealed Carry Permit is now recognized in 60% of the USA, with 33 other states granting reciprocity. Seminar participants who completed the course left the Expo with enhanced abilities to protect themselves while traveling. The 4-hour seminar was hosted by Dave Matthews.
Many experts consider the Heckler & Koch P7m8 one of the very best carry pistols ever. On HK’s famous fixed-barrel “squeeze-cocker”, the striker is cocked by squeezing the grip, and then de-cocked when pressure on the grip is released.
We like to use the Birchwood Casey 2″ and 3″ orange “Target Spots” stick-on circles (with diamond centers) for shooting at 300 yards and beyond (photo right). These give you a very precise aiming point if you align your cross-hairs with the corners of the diamond. However, we know that some guys, particularly those whose scopes have “target-dot” reticles, prefer to have a small box for an aim point. In addition, the orange Target Spots are not a true “Day-Glo” color, so they may seem a little dull (low-contrast) when the target is in shadow.
For guys who want an ultra-high contrast target with a square box in the center, Birchwood Casey offers a series of neon green targets with box centers and spike-style extended vertical and horizontal lines (like on a compass). The manufacturer explains: “These newly-designed adhesive Target Spots come in highly-visible Atomic Green. The crosshair design fulfills the needs of open-sight shooters along with scope users. Easily line up your open sights on the center square or lay the crosshairs along the vertical and horizontal diminishing lines.” You can also rotate the Atomic Green Target Spots 45° to create a diamond center with the crosshairs in an “X” pattern.
We’ve sampled these targets. The Atomic Green background is a true “Day-Glo” color (like safety signs) so these circles appear very bright on a target backer. These work well in low light. We won’t throw away our orange Target Spots, but these Atomic Green circles are a nice option. NOTE: Atomic Green spots are NOT “splatter” targets — a contrasting bright color does NOT appear around your bullet holes.
Multiple Sizes Offered
Birchwood Casey sells the new Atomic green circles in various sizes. You can order a Combo Pack with sixty 1″-diameter spots, thirty 2″-diameter spots, and twenty 3″-diameter circles.
How do you trim your cases? We use a variety of tools, including power case trimmers. But our go-to trimmer for Benchrest-type cartridges is the L.E. Wilson Trimmer unit, now available in a handsome and durable stainless assembly. This thing is slick. It trims very precisely with the use of Wilson case holders combined with a micrometer-type stop for length control. As sold complete with micrometer, quick clamp, and metal stand, this new Wilson Stainless Trimmer is $139.95 at Creedmoor Sports. We think that’s a fair price for a unit that can last a lifetime, trimming many thousands of cases.
In this video, Bill Gravatt demonstrates the new Stainless Wilson trimmer. Gravatt offers some smart tips so this video is worth watching even if you’ve used a Wilson trimmer before:
Tips for Trimming with Wilson SS Micrometer Trimmer:
1. After inserting brass in the case holder, tap the case lightly to ensure it seats fully.
2. When starting your case-trimming session, do one or two test cases to check cut length. Adjust length with micrometer, then test length again. If “good to go”, set length stop. NOTE: Release the Stop Screw to make major adjustments. Use the Micrometer to make fine adjustments, in .001″ increments.
3. After trimming operations, be sure to chamfer case mouth after cutting to remove burrs. NOTE: After you have made the chamfer, we recommend gently spinning the chamfer tool backwards a couple times in the case neck. This will burnish/smooth the newly-cut champing, which helps with bullet seating.
Features of Deluxe Wilson Stainless Case Trimmer with Micrometer
— Long lasting Stainless finish with Micrometer adjustment.
— New 304 Stainless Steel Handle included with Micrometer Trimmer.
— Rotary-style clamp swings to secure case-holder — quick and easy.
— Larger stop screw adjustment from 3/8″ (old) to 1/2″ (new) with increased width on stop nut. Coated with black oxide for a long lasting durable finish.
— Made in the USA with American Steel.
— Power Adaptor compatible.
How’d you like to score a check for $25,000? That’s the winner’s pay-out for the 2017 NRA World Shooting Championship (WSC), which runs September 14-16 at the Peacemaker National Training Center in Glengary, WV. This event offers over $250,000 in cash awards and product prizes, making the WSC the richest combined shooting event in the USA (if not the world).
WSC Highlight Video with Competitor Interviews:
You can still Register for the WSC — though remaining spots are filling up fast. It ain’t cheap — Pros pay $395 while amateurs and juniors pay $325. Keep in mind though that all guns and AMMO are supplied. This unique 3-day multi-gun match tests competitors’ skills across twelve challenging stages involving nearly every major shooting discipline for rifles, shotguns, and pistols. REGISTER HERE.
All the Equipment is Supplied
“What makes this event very unique, especially to a professional shooter, is all the equipment is supplied. You have to leave your ego at home and just try to adapt as best you can to the equipment that you have supplied.” — Jerry Miculek
This major match attracts both sponsored Pros and “regular Joes”. For 2017, shooters will be split into two groups: a Professional Division for sponsored shooters, and the Amateur Division for non-sponsored competitors. All firearms, optics, and ammo will be provided by match sponsors for both divisions. “This year the NRA is going back to basics and returning the match to the original format of two divisions for professionals and amateurs, putting everyone on an even playing field”, said Cole McCulloch, NRA Competitive Shooting Director.
Video Shows 2014 World Shooting Champion SFC Daniel Horner in 3-Gun Stage
Cash Awards, Huge Prize Table, and New Random Drawings
The NRA World Shooting Championship will offer $250,000 in cash and prizes. Along with the $25,000 winner’s pay-out, there will be fat cash prizes for second and third place overall, High Lady, and High Amateur Junior. Then there are the prize tables — a real treasure trove. The designated Amateur prize table by itself will offer products and certificates topping $100,000 in value.
NEW Random Drawings — The WSC has added a new type of prize for 2017. Ten (10) Random Draw Prize Winners of $400 will be chosen during the WSC Awards Banquet. These random drawings give every competitor a chance to win cash, no matter what their event ranking.
Match entry fees are $395 for Professionals, $325 for Amateurs and Juniors. All firearms and ammunition are provided, and entry fees include one awards banquet ticket. For more information, visit WSC.NRA.org, call the WSC Coordinator at 703-267-1479, or email NRAhighpower@nrahq.org. On the official WSC.NRA.org you’ll find descriptions fo the 12 WSC stages. In addition, there is information about Peacemaker National Training Center and nearby lodging options.
How to Win the World Shooting Championship
“The format at the NRA World Shooting Championship is unique in that you don’t know what you have to shoot until you show up, so training for the event is a little difficult. My advice is to pack some good eye and ear protection, bring an open mind, be prepared to listen to the stage descriptions, figure out the best way you can take the guns they provide, and post the best score you can. When the match supplies all the guns and ammo, all you have to do is deal with ‘the performance’. This is the most level playing field in the shooting sports — anyone from around the world can come and play.” — Bruce Piatt, 2015 NRA World Shooting Champion
Competitors can register in one of two divisions: professional and amateur. The pro division is reserved for shooters who possess sponsorships, receive financial support for their competitive shooting or those who have been part of specialized firearms teams. All other shooters register in the amateur division. The playing field is completely level — every competitor uses the same guns, optics and ammunition. No competitors are allowed to bring their own gear, so everyone starts the match on equal footing.
A while back, John Seibel, creator of the Varmints for Fun website, put together a 6-6.5×47 Varminter with a Lilja 10-twist barrel and BAT RBRP three-lug action. Richard Franklin smithed the gun using a Model 10 Varminter stock, one of Richard’s own stock designs.
Varmint Loads with 75gr and 87gr V-Maxs
Our Forum readers have asked for recommended 6-6.5×47 Lapua loads for the lighter bullets. Well, John has some useful load data that should provide excellent starting points for 75gr and 87gr projectiles. John writes: “The 75s and 87s will be my main groundpig/varmint rounds. I have worked up loads for all of them but I need to work on the 95s to fine tune them for the egg shoot. I used CCI 450 primers for all loads. They have shown to reduce ES greatly. This case has a small primer pocket and I reasoned with the slower burning powders I wanted to get my velocity as high as possible. I had plenty of H414 and N550 … so that’s what I tried. Velocities and case fullness seemed to be pretty dang good.”
John favored Vihtavuori N550 for the 75 V-Max, while H414 was his powder of choice for the 87gr V-Max. John found these two powders offered near 100% fill density. There are other good powder choices for these bullets. For pure accuracy, you may want to try the 80gr Berger Varmint bullet — it has shot superbly in our 6BRs.
The IBS Groups Nationals has a 4-man team competition based on the HV Grand Aggregate results. The 2017 winning team was a “Murderer’s Row” consisting of Wayne Campbell, Billy Stevens, Bart Sauter, and Larry Costa. Each boasts Hall of Fame and/or multiple World Team accomplishments. Hamming it up in the background is HOF shooter Jack Neary.
2017 IBS Group Benchrest National Championships
Holton Gun & Bow Club, Holton, Michigan
August 14-19, 2017
Report by Jeff Stover, IBS President
This year the 2017 IBS Group Benchrest Championship was held at the Holton Gun & Bow Club, in Holton, Michigan. This is a pretty facility boasting an impressive firing line with forty (40) concrete benches. Monday morning in western Michigan saw the Heavy Bench (HB) shooters hauling their big railguns to the line. Hall of Fame and multiple World Team shooter Wayne Campbell shot a nice .1858 aggregate for five 10-shot groups. The only other “Teen Agg” was Iowa’s Dave Coots with a .1978. Wayne’s win foretold what was to come the rest of the week.
Wayne Campbell and Jeff Summers Put on a Show
On Tuesday, the bag guns came out for Light Varmint (LV) and Sporter (SP). Mr. Campbell maintained his mojo, shooting yet another “Teen Agg”. Wayne’s .1788 edged fellow HOF member Larry Costa’s .1854. The Light Varmint 100 was also contested on Tuesday. Peter Smith shot a very fine .1658 to beat out Canadian Bill Mitchell at .1960.
Wednesday was reserved for Heavy Varmint (HV) at 100 yards. Holton is Bob Scarbrough’s home range, but he can shoot “lights out” anywhere. Nevertheless, his .1518 had to be satisfying. Wayne Campbell, still on fire, laid down a .1694. In third place, Tennessean Jeff Summers posted a .1800. Mr. Summers is always near the top of any benchrest leader board. He is coming off another Super Shoot win. Most of the time Jeff does not win the small group of the day, but he wins many Aggregates. He is one of the most mistake-free shooters in the game.
File photo courtesy Holton Gun & Bow Club
Benchrest for Group Basics — Four Classes at Nationals
IBS group competition is contested at 100 and 200 yards. At the National Championships, it takes thirty targets of five shots each and ten targets of 10-shot groups to win a “4 Gun Nationals”. That includes four (4) gun classes: Light Varmint, Heavy Varmint, Sporter, and Unlimited. For all practical purposes, the first three are known as “bag guns” while the heavy bench rifles are “railguns”.
In fact, most competitors shooting a bag gun opt for a single rifle, which has been benchrest standard for decades: a 10.5-lb rifle chambered in 6PPC. This can compete in three classes: Sporter, Light Varmint, and Heavy Varmint. The fourth class shot at the Nationals is Unlimited (aka Heavy Benchrest or “HB”). This class features the big, heavy railguns — the most sophisticated Benchrest rigs of all which shoot 10-shot groups at 100 and 200 yards.
For the IBS Nationals, group-shooting competition features 100-yard targets for the first three days followed by three days at 200 yards. Six days total. It is done this way to require only one change of wind flags. Nationals competition requires “full rotation”. That means that every time a shooter goes to the line for the next match target, he or she must move a requisite number of benches to the right. At the end of the day a shooter will shoot across the full width of the line. Some ranges offer unique properties that render some parts of the range harder or easier to shoot small groups. Bench rotation is important to even out those factors.
Thursday was set for 200 yards. Starting off was Heavy Bench (HB), the big railguns. Upper Midwest shooter, Mark Buettgen shot steadily for a .2406 Agg, aided by a small .378. His largest group was a .527. Consistency wins bench matches. Lee Hachigian drove in from the Detroit area with his railgun to be next to the winner with a .2608.
On Friday, two Aggs were shot, Light Varmint and Sporter. Larry Costa nearly nicked a Teen Agg to win LV 200 with a .2027. Lurking high in the standings once again was Jeff Summers and his .2352. Wayne Campbell was not asleep. He was merely third at .2480. The Sporter competition was won by the best benchrest shooter of all time, Tony Boyer. Tony shot a .2287 to edge Billy Stevens. Mr. Boyer added another Hall of Fame point. His 170 points are 120 more than the next shooter (Lester Bruno, no slouch!) in the ranking.
Benchrest legend Tony Boyer added another Hall of Fame point to his amazing total. (File photo from 2016 IBS Group Nationals in Weikert, PA)
The HV guns came out to contest 200 yards on the last day of the Nationals. Jeff Summers worked a .1868 to the winner’s circle. The always tough Larry Costa was close at .1929.
At the IBS Group Nationals, shooters compete for Grand Aggregate (100+200) honors in four classes: LV, HV, Sporter, and HB. In addition, there are multi-gun titles: 2-Gun (all HV and LV targets in 100 & 200); 3-gun (all HV, LV, SP in 100 & 200), and 4-gun (all HV, LV, SP and Heavy Benchrest in 100 & 200).
The Grand Aggregate (100+200) winners were:
Heavy Varmint: Bob Scarbrough, Jr. (.1824)
Light Varmint: Jeff Summers (.2313)
Sporter: Wayne Campbell (.2119)
Heavy Bench: Lee Hachigian (.2374)
In the prestigious multi-gun competition, Jeff Summers won the 2-Gun. Wayne Campbell added more HOF points by winning BOTH the 3-Gun AND the 4-Gun. With his impressive 3-Gun and 4-Gun victories, the talented Mr. Campbell claimed the title of Top Overall shooter after six days of trigger-pulling.
2017 IBS Nationals Powderpuff Exhibition Shoot
For decades, IBS hosts an exhibition shoot on the afternoon of a day when only one Aggregate is contested instead of two. It is called the Powderpuff and is intended to allow family members and others who do not shoot competitively to give benchrest shooting a try. Each shooter is assisted by a coach who instructs the shooter. World-class shooters such as Billy Stevens and Bob Scarbrough give their time and talents to assist the novice competitors. There is no time limit to rattle the inexperienced shooters.
File Photo from previous Powderpuff Event at 2015 IBS Group Nationals
The competition is financially supported by the IBS President’s Fund. This year, at Holton in Michigan, we had four youth and 11 adult competitors. Chris Jeffers won the adult category with a nice .204″ group, while Jake Henderson put his five shots into a .244″ to win the youth division. Congratulations to all the Powderpuff competitors — we hope this inspires them to get more involved in Benchrest shooting.
To get the best accuracy out of any benchrest rifle, you need to find the optimal position of front rest and rear bag. The important point to remember is that each rig is different. One gun may perform best with the front rest right at the tip of the forearm (Position ‘D’ in photo), while another gun will work best with the rest positioned much further back. This Editor’s own 6BR sits in a laminated stock that is pretty flexy in the front. It shoots best with the front rest’s sandbag located a good 6″ back from the forearm tip (position ‘A’).
Here’s some benchrest advice that can help you reduce vertical and shoot tighter groups… without spending another penny. Many benchrest shooters spend a fortune on equipment and devote countless hours to meticulous handloading, but they never experiment with their rifle’s position/balance on the bags. This article explains why you should test your rifle in various positions. What you learn may surprise you (and improve your scores).
Next time you go to the range, experiment with the position of your rifle on the front rest, and try a couple different positions for the rear bag. You may find that the rifle handles much better after you’ve made a small change in the placement of your gun on the bags. Recoil can be tamed a bit, and tracking can improve significantly, if you optimize the front rest and rear bag positioning.
This competitor has the front rest positioned fairly far forward but not all the way out. Note the stop on the front rest — this limits forward stock travel.
Balance Your Gun BEFORE You Spend Hours Tuning Loads
In the pursuit of ultimate accuracy, shooters may spend countless hours on brass prep, bullet selection, and load tuning. Yet the same shooters may pay little attention to how their gun is set-up on the bags. When you have acquired a new rifle, you should do some basic experimentation to find the optimal position for the forearm on the front rest, and the best position for the rear bag. Small changes can make a big difference.
Joel Kendrick, past IBS 600-yard Shooter of the Year, has observed that by adjusting forearm position on the front rest, he can tune out vertical. He has one carbon-fiber-reinforced stock that is extremely rigid. When it was placed with the front rest right under the very tip of the forearm, the gun tended to hop, creating vertical. By sliding the whole gun forward (with more forearm overhang ahead of the front sandbag), he was able to get the whole rig to settle down. That resulted in less vertical dispersion, and the gun tracked much better.
Fore/aft stock position is important even with very wide fore-ends.
Likewise, the placement of the rear bag is very important. Many shooters, by default, will simply place the rear bag the same distance from the front rest with all their guns. In fact, different stocks and different calibers will NOT behave the same. By moving the rear bag forward and aft, you can adjust the rifle’s overall balance and this can improve the tracking significantly. One of our shooters had a Savage 6BR F-Class rifle. By default he had his rear bag set almost all the way at the end of the buttstock. When he slid the rear bag a couple inches forward the gun tracked much better. He immediately noticed that the gun returned to point of aim better (crosshairs would stay on target from shot to shot), AND the gun torqued (twisted) less. The difference was quite noticeable.
A small change in the position of the forearm on the front rest, or in the placement of the rear bag, can make a big difference in how your gun performs. You should experiment with the forearm placement, trying different positions on the front rest. Likewise, you can move the rear bag back and forth a few inches. Once you establish the optimal positions of front rest and rear bag, you should find that your gun tracks better and returns to battery more reliably. You may then discover that the gun shoots smaller groups, with less vertical dispersion. And all these benefits are possible without purchasing any expensive new gear.