There are hundreds of cartridge types capable of winning in F-Open. For F-TR you can shoot either the .223 Rem or .308 Win, but you have many load options. This article will focus on proven choices, currently used by the top F-Class shooters in the world. Our discussion will analyze cartridge selection based on the four different F-Class sub-disciplines: Open Mid-Range, Open Long-Range, F-TR Mid-Range, and F-TR Long Range.
Click image to view full-screen photo.
Mid-Range F-Open Cartridges
For starters, a .300 WSM is certainly capable of winning mid-range matches but it is not ideal. So what is ideal, and why? F-Class Mid-Range matches usually are usually shot at 300, 500, or 600 yards — or all three. At those distances the 6mm and 6.5mm cartridges rule. In moderate conditions, the 6mm Dasher is unbeatable. Its low recoil along with its super grouping ability and good ballistics make it my number one choice for Mid-Range.
Best bullets for the 6mm Dasher are: Vapor Trail 103gr, Berger 105 Hybrid, 108 BT, and 105 VLD (hunting). Best powders are: Varget, H4895, and Reloder 15.
Choices for Mid-Range in Tougher Conditions:
We all know that conditions are not always “moderate” that’s why something a little bit bigger will save you a “Nine” or two. The 6.5X47 Lapua was designed for 300-meter competition, but as soon as it was released, it was adopted by F-Class, benchrest, and tactical shooters. It offers great ballistics with very low recoil and big “accuracy window”. Lapua makes great brass for it (no surprise there) and Berger makes great bullets: 130gr VLD, 140gr VLD, 140gr Hybrids. Best powders in most barrels are Varget and H4350, I don’t use double-based powders such as Reloder 17 and the Vihtavuori N500 series because of their unpredictable performance day to day (greater temp sensitivity).
The 6.5X47 Lapua necked down to 6mm is also a great option for mid range matches. I was able to easily get 3200 fps with 105 hybrids and H4350.
Choice for Long-Range F-Open Competition
In Long-Range F-Open Class (out to 1000 yards), the big, high-BC bullets rule. If I had to pick one cartridge for F-Class (both mid- and long-range) I would pick the .284 Winchester or one of its variants. The .284 Win is currently dominating in F-Open competition. It offers great barrel life, it is super-easy to tune and its recoil is very manageable. The best bullets for it by far (in my opinion), are the Berger 180 Hybrids. But Sierra’s new 183gr MK bullet (with factory-uniformed meplats) seems to perform very well as does the Berger 180 VLD. Best powders for the .284 Win are H4350 and H4831SC.
Long-Range Only F-Open Cartridge
As much as I like the .284 Win, for long-range competitions I like the .300 WSM even more. If you look at a .300 WSM and a 6mm Dasher side by side, they appear almost identical in geometry — the .300 WSM looks like an “super-sized” Dasher. Both cartridges are currently the “darlings” of long-range benchrest due to their extraordinary grouping ability and huge “node’’ windows. Big accuracy windows allow loads to perform well in different conditions and geographical locations. That’s obviously very important if you travel to compete. The .300 WSM loaded with Berger 215gr or 230gr Hybrids is very tough to beat at long range, and it is currently my number one choice.
The 7mm RSAUM is another outstanding long-range round. It resembles a 6BR on steroids and it is almost as easy to tune. Best bullets for it are Berger 180gr Hybrids, 195gr EOLs, and Sierra’s 183gr MatchKing. Best powders for the 7mm RSAUM are: H4350, H4831SC, and VV N160.
Top Caliber/Bullet Combos for F-TR
In F-TR competition, the choice is clear — a .308 Win throated for Berger 185gr BTLRs and 200gr Hybrids will win in mid-range AND long-range comps. Many championships have been won, and many records set with those two bullets in the .308 Win. To quote Danny Biggs (a two times FTR National Champion) “The 185 BTLR is the best bullet for .308 Win ever made”.
The Berger 215gr Hybrids have been used to win many competitions including recently the 2015 F-Class Nationals. Bryan Litz won both the Mid-Range and Long-Range 2015 Championships using 215s. Bryan’s rifle is shown below:
I recommend chambers throated for the 185/200 grain projectiles over the 215/230 grain bullets. The reason is that if you have your barrel throated out for the 215s or the 230s, you could have a “slow” barrel and max out on pressure before the desired velocity is reached. Optimum freebore for the 230s is too long for the 185/200s, so you would be limited to using only 215/230gr bullets in that barrel.Furthermore, the recoil increase with heavier bullets is substantial, causing the rifle to be more difficult to shoot.
.223 Rem — Not A Competitive Option
I would stay away from the .223 Remington. On paper the 90gr VLD will shoot inside most .308 Win loads even at a 1000 yards. But in reality, on average, the .223 Rem, regardless of what powder/bullet combo is used, cannot compete with the .308 Win. [Editor: The equipment lists at major F-TR matches will confirm Kovan’s conclusion here.]
Conclusion (and Other Options)
This article covers only the (currently) most popular cartridge/bullet combos for F-Class (F-Open and F-TR). As I said in the beginning, many cartridge types are capable of winning but are not listed due to their low popularity, case design, or lack of quality components. All of the above information is based on my personal experience and it is meant to help new shooters choose the right cartridges for F-Class matches. Thanks for reading and good luck — Emil Kovan
Emil Kovan Competition History:
– 2014 F-Class Open National Champion
– 2015 F-Class Open National Championship, Silver Medal
– F-Class Open National Championship Teams, 2015, 2014, 2013, Shooting Team Member
– Over 15 wins in Regional and State Championships in Palma, F-TR, F-Open
“Shoot Like a Champion”. Bryan Litz, author of Applied Ballistics for Long-Range Shooting, says he often sees notes like this tucked in shooter’s gear (or taped to an ammo box) at matches. What “marksmanship mantras” do you use? Do you have a favorite quote that you keep in mind during competition?
On the Applied Ballistics Facebook Page, Bryan invited other shooters to post the motivating words (and little reminders) they use in competition. Here are some of the best responses:
“Shoot 10s and No One Can Catch You…” — James Crofts
“You Can’t Miss Fast Enough to Win.” — G. Smith
“Forget the last shot. Shoot what you see!” — P. Kelley
“Breathe, relax, you’ve got this, just don’t [mess] up.” — S. Wolf
“It ain’t over ’til the fat lady sings.” — J. McEwen
“Keep calm and shoot V-Bull.” — R. Fortier
“Be still and know that I am God[.]” (PS 46:10) — D.J. Meyer
“Work Hard, Stay Humble.” — J. Snyder
“Shoot with your mind.” — K. Skarphedinsson
“The flags are lying.” — R. Cumbus
“Relax and Breathe.” — T. Fox
“Zero Excuses.” — M. Johnson
“SLOW DOWN!” — T. Shelton
“Aim Small.” — K. Buster
“Don’t Forget the Ammo!” (Taped on Gun Case) — Anonymous
PARTING SHOT: It’s not really a mantra, but Rick Jensen said his favorite quote was by gunsmith Stick Starks: “Them boys drove a long ways to suck”. Rick adds: “I don’t want to be that guy”, i.e. the subject of that remark.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. McMillan — 20% Off Game Scout Stocks Father’s Day Sale
As a Father’s Day promotion, McMillan Fiberglass stocks is now offering 20% off the Game Scout stock, McMillan’s #1-Selling hunting stock. This combines the A3 pistol grip with the general lines of the Remington Classic stock. It is available in a variety of colors/finishes inletted for Rem 700 short and long right-handed actions. To order, use Code “fathers2017″. (Sale tip from EdLongrange.)
2. Lyman — $25.00 Off Top-Selling Products
You can now get $25.00 Off five of Lyman’s top-selling products: BoreCam, Case Prep Xpress, Gen6 Powder Dispenser, Cyclone Rotary Tumbler, and AutoAdvance Target. With Lyman’s Summer Mail-In Rebate Program, you can earn a $25 rebate per select item bought from any Lyman dealer, online or direct from the Lyman website. Items must be purchased between June 9 and August 31, 2017 to qualify. CLICK HERE for the Rebate Redemption Form.
Products included in this Sizzling Summer Rebate Program include:
Case Prep Xpress (Item #7810220)
Borecam Borescope (Item #04055)
Cyclone Rotary Tumbler (Item #7631550)
Gen6 Compact Digital Powder System (Item #7750550)
AutoAdvance Remote Control Target System (Item #4320051)
3. PT&G — Howa Barreled Actions with Trigger, $350.00
Howa makes excellent, smooth-running actions, and the Howa HACT 2-stage trigger is WAY better than most domestic factory triggers. Right now you can save big bucks on Howa barreled actions, complete with HACT trigger and trigger-guard. Pacific Tool & Gauge (PT&G) sourced a truckload of Howa barreled actions, which are now on sale. Available at $350.00 are: .204 Ruger, .223 Rem, .22-250, .243 Win, 7mm-08, and .308 Win. Choose from light- or heavy-barrel contours. For $390.00 you can get .375 Ruger, 7mm Rem Mag. These barreled actions would be great for custom hunting/varmint rifle projects — many have factory camo finishes. Howa barrels typically deliver easy sub-MOA accuracy (and often much better). Some of these barreled actions may carry Weatherby or Nosler markings, but they were all made at the Howa factory in Japan.
4. CDNN — Ruger Precision Rifle 6.5 CM or 6mm CM, $1199.00
Here’s a great deal if you’re looking for a GEN2 Ruger Precision Rifle for PRS events or other bolt-action tactical applications. The 6.5 Creedmoor and 6mm Creedmoor chamberings are the “hot tickets” for this rifle. You’ll find many sellers charging $1400.00+ for this popular rifle. This week you can get a GEN2 Ruger Precision Rifle in 6mm Creedmoor or 6.5 Creedmoor for just $1199.00 from CDNN Sports, complete with scope rings and sling. And Gun Prime also has the 6.5 Creedmoor RPR for $1128.00 this week (without sling or rings). Curious about the differences between the GEN2 Ruger Precision Rifle and the original Model? CLICK HERE for a complete spec comparison and a video (scroll down landing page).
5. Amazon — Lyman BoreCam, $167.99 with Rebate
Here’s the best deal we’ve found on an excellent product in high demand. The Lyman BoreCam is an electro-optical borescope with a digital display. You can record “stills” on a SD card. This is one of the hottest products on the market right now — and users really like the BoreCam (although some wish the digital view-screen was larger). Amazon.com now has the Lyman BoreCam for $192.99. Plus this product qualifies for a $25.00 Lyman Mail-In Rebate, lowering your next cost to $167.99! Grab it while you can at that price. Other vendors are charging a LOT more. For example, MidwayUSA’s price is $259.99 before rebate.
6. Amazon — Motion-Sensitive Interior Light for Gun Safes, $10.99
Let there be light. Here’s a great accessory for your Gun Safe. This “smart” LED lamp turns itself on when you open the door, and off when you close the door. There’s a built-in magnet so you can easily attach the light to the inner walls or “ceiling” of your gun safe. It works, it’s handy, and it’s inexpensive — just $10.99 with free shipping for Prime members (or otherwise free shipping for $25+ orders). We bought two for our own firearms vault. This can provide 14 hours of light with three AA batteries (not included). Very versatile, these motion-sensor lamps can also be used in closets.
7. Natchez — Surplus SKB 5041 Transport Cases, $129.99
Natchez has obtained a supply of British MOD Surplus SKB 5041 rifle cases. These were ordered as mine detector cases, but were never issued. Natchez has removed the foam cut for the detectors and replaced it with new 2-piece convoluted foam. Interior dimension of the case is 50″x14.5″x5″ so this will hold long-barrel match rifles comfortably. These are extremely high-quality cases, very tough and rugged, waterproof with gaskets. These cases feature four SKB patented trigger latches, four reinforced padlock locations, and inline wheels. Though in excellent condition, some case may have minor exterior scuffs. You won’t find a better case at anywhere near the price. These normally retail for $299.99.
8. MidwayUSA — Long (50″ or 52″) Scoped Rifle Case, $29.99
It’s hard to find high-quality soft cases that are long enough for F-Class and Fullbore rifles with long barrels. But here’s a great option from MidwayUSA. This week MidwayUSA’s Heavy Duty Scoped Rifle Case is on sale for just $29.99 and you can order the extra long 50″ and 52″ sizes at no extra charges. This case is offered in four colors (Tan, OD Green, Charcoal, and Black), and five sizes: 40″, 44″, 48″, 50″, and 52″. This is a good case with a large zippered pockets, heavy duty padding, and tough, 400 Dernier PVC-coated ballistic polyester fabric. Lay-flat construction allows this case to stay open on a shooting bench. Shooters like this case — check out MidwayUSA’s user reviews.
In order to promote gun safety, Glock has launched a program to promote the four basic rules of gun handling. Called Follow the Four, Glock’s social media campaign asks shooters nationwide to “take the pledge”, agreeing to follow the Four Rules of gun safety. This year’s #FollowTheFour movement coincides with June National Safety Month and will run from June 1, 2017 through June 30, 2017.
This video with R. Lee ‘Gunny’ Ermey Explains the Safety Campaign
Glock asks those who make the safety pledge to spread the word via Facebook, Twitter, and Instagram with hashtag #FollowTheFour. Those who take the pledge and promote the message via social media will be entered to win a Glock pistol. Visit Glock.com/safetyplege page to take the pledge and learn more about the Glock give-away.
Spread the Word, But Maintain Your Privacy
You don’t have to post an actual photo of yourself to enter the contest. In fact we recommend that you do NOT post a recognizable image of yourself. We advise gun owners to maintain their privacy whenever possible. This is doubly important in states with oppressive firearms regulations such as California. Here are social media posts that do not reveal the poster’s identity.
Each Wednesday, the U.S. Army Marksmanship Unit publishes a reloading “how-to” article on the USAMU Facebook page. This week’s “Handloading Hump Day” article covers two basic case prep chores — uniforming primer pockets and deburring flash-holes. Visit the USAMU Facebook page for other tips.
Primer Pocket & Flash-Hole Conditioning
This week, we’ll address a question that frequently arises: “Do you uniform primer pockets and deburr flash-holes?” As we tailor our handloading methods to the specific needs of each instance, the answer, not surprisingly, is “Sometimes!” However, don’t flip that dial just yet, as what determines our approach may be helpful in deciding how to address one’s own techniques. Moreover, we have a buried “Easter Egg” morsel that may bring a chuckle, as well as useful safety information!
Generally, the USAMU Handloading Shop does not uniform primer pockets (PP) or deburr flash holes (FH) of our rifle brass. We’re certainly not against it… Rather, this reflects the very high volume of ammunition we load, the fact that very few cases are ever re-loaded for a second firing, and the types of brass we use. However, as a need is perceived, we DO deburr flash holes. Of interest, we have fired many very small, 1000-yard test groups and aggregates using weight-selected, domestic brass that had not had PPs uniformed or FHs deburred.
Before and After — On the left is a fired, deprimed 7.62×51 case with primer residue intact. On the right the primer pocket has been uniformed to SAAMI specs. Note the shiny finish at the bottom of the pocket — evidence of the the removal of metal when uniforming the primer pocket.
As to the type cases we use, many thousands of our long-range 5.56mm cases come to us from the arsenal with the primer of our choice pre-installed and staked-in, per usual practice. Obviously, we cannot uniform either FHs or PPs on this live, primed brass. However, after careful sorting, inspection and preparation, we do obtain match-winning results with it.
Shooters who reload their brass several times may decide to uniform PPs and deburr FHs, especially on their “300-yard and beyond” brass. Here, they will use the cases many times, while the uniforming is performed only once. Also, most handloaders only process moderate amounts of brass, compared to our multi-thousand round lots.
Having high quality Long Range (LR) brass helps. Many of the better brass manufacturers install their flash holes so that no burrs are created. Still, it does pay to inspect even THESE manufacturer’s products, as occasional slips are inevitable. Very rarely, some of the best makers will have a significant burr in, say, 1 per 1000 or 2000 cases, and it’s worth catching those.
Exceptions can always be found. Recently, we began processing a large lot of match brass from a premier manufacturer. We were startled to find that every case had a significant burr in the FH — something we’d never before seen from this maker. We then broke out the FH deburring tools and went to work.
Some observers have noted that it can be difficult to truly verify the contribution to accuracy of these procedures — particularly when firing from the shoulder, in conditions. Members of this staff, as individual rifle competitors, do often perform these operations on their privately-owned LR rifle brass. One could ascribe this to the old Highpower Rifle maxim that “if you think it helps, then it helps.”
However, a World Champion and Olympic Gold/Silver medalist here commented on his own handloading (for International competition, which demands VERY fine accuracy). He noted that he did seem to see a decline in accuracy whenever he did not uniform FHs, deburr FHs and clean primer pockets before each reloading. (One might be tempted to counter that only a truly World Class shooter could reliably detect the difference.) However, with the wisdom of decades experience, our Champion also remarked that “It could have been that I just wasn’t shooting as well that day.”
For those who do opt for these procedures, note that various tool models may have adjustable depth-stops; pay attention to the instructions. Some FH-deburring tools (which enter the case mouth, not the primer pocket) are dependent upon uniform case length for best results.
Above is a flash-hole deburring tool on an RCBS powered case-prep unit. These case prep machines can save a lot of pain and misery, helping one perform various functions quickly and efficiently.
Three Shots Standing at 400 Yards in 4.37 Seconds Could you hit a silhouette target at 400 yards, shooting offhand? Probably, with a little practice. Now try doing that three times in just 4.37 seconds, including picking up/mounting the rifle! Not possible? Watch the legendary Jerry Miculek do that in this impressive demonstration of rapid-fire rifle shooting.
Jerry Miculek — that name is synonymous with revolvers. But Jerry is also one heck of a rifleman, as he demonstrates in this video. Grabbing his rifle from the top of an oil drum, Miculek proceeds to put shots on three different steel targets at 400 yards — all in under 4.4 seconds. Most of us would be lucky to make one successful shot in that time limit. Miculek hits all 3 targets (and makes it look easy).
In this video, Jerry hits not one but THREE c-zone targets at 400 yards. And — get this — he does this in under 4.4 seconds starting with his rifle laying on a support (plywood on top of a barrel). It took Jerry two tries (on his first run he hit 2 out of 3 in 4.65 seconds). On the second attempt (see video starting at 2:19), it takes Jerry just 4.37 seconds to shoulder his rifle, aim, and fire three shots, each hitting a separate steel target. Wow. That’s truly remarkable. Most of us would need ten seconds (or more) just to get the scope on the first target.
Trust us folks, this ain’t easy. It takes remarkable marksmanship skills to shoot with this kind of precision at this kind of pace. As Jerry would say himself, “Not bad for an old guy who needs glasses”.
Wouldn’t it be great if your rifle case could do double-duty as a shooting mat? You’d have one less gear item to haul to the range. Well there is such a product — Uncle Mike’s Long Range Tactical Bag quickly and easily converts to a 78″ shooting mat. Measuring 50″ in length, with a 15″-tall main compartment, this bag is big enough to handle most tactical and F-TR rifles with optics and Harris-type bipods attached. A 30″ flip-out forward section includes a front load strap that allows shooters to pre-load the bipod legs while shooting prone.
The Long Range Shooting bag has four self-adjusting magazine pockets, which will hold magazine sizes from .223/5.56mm to .308/7.62mm. Conveniently, this new 50″-long soft case will fit inside the popular Pelican model 1750 hard case (for those situations where you need greater protection).
Fits Long-Range and Tactical rifles up to 49″ in length
Fold out front section has bi-pod front load strap
Would you pay over twenty-seven grand for a slightly-used Rem 700 bolt-action rifle and Nightforce scope? Well somebody did just that recently, paying the princely sum of $27,556.00 for a DARPA XM-3 Sniper Rifle system in a CMP Auction. In fairness the buyer did get a case, a PVS22 Night Vision Device (NVD), and some other accessories. Created for the USMC, only fifty-two (52) XM-3s were ever made, so this is a pretty rare rifle. But, honestly, is this thing really worth $27,556? What do you think?
This XM-3 system was recently sold by the CMP at auction (SEE Auction Photos). There was plenty of interest in this item, with 111 total bids for the rifle, case and accesories. Here is the CMP Auction product description:
DEFENSE ADVANCED RESEARCH PROJECT AGENCY (DARPA) XM-3 Sniper Rifle S6533990
These XM-3 sniper rifles used by the United States Marine Corps. In mid-2005, DARPA worked with Lt. Col. Norm Chandler’s Iron Brigade Armory (IBA) to field items to expeditionary units in Afghanistan. Since they already had a great working relationship, DARPA contracted IBA to build and test lightweight sniper rifles that incorporated the improvements the snipers desired in combat. The mission was to be lighter and smaller than the existing M40s, while having better accuracy, clip-on night vision that did not require re-zero, better optics, and better stock, and it had to be suppressed. The barrel had to be short enough to allow maneuverability yet long enough to deliver a 10” group at 1,000 yards. If the barrel was too heavy, maneuverability would decrease, yet if the barrel was too light it would only be able to shoot a few rounds before the groups started to shift due to barrel temperature. IBA tested a number of barrel lengths, ranging from 16 to 20 inches and in different contours. Each rifle with a different length was assigned an XM designator starting with XM1 through XM3. In each case, everything on the prototype rifles was kept the same except the barrel.
During the final phases of testing it was found that the 18” barrels had no issues keeping up with their longer 20” brethren. The final barrel length was set at 18.5”, and the contour was a modified #7. The straight taper on the barrel was only 2” vs. 4” and the overall diameter at the muzzle was .85” vs. .980”. This helped reduce a lot of the rifle’s weight while not negatively affecting accuracy or effective range. A number of the groups at 1,000 yards were < 1 MOA. The Marines of I-MEF were the first to field test the rifles at Camp Pendleton. Shortly after I-MEF took receipt of the XM-3s, the first units in II-MEF took receipt of theirs. By mid-2006 there were dozens of XM-3s in Iraq. There were 52 XM-3s made.
More info on the XM-3 Sniper Rifle can be found at SteveReichertTraining.com.
Also included: Scope SN P06798; Sniper Data Book with some firing information; PVS22 Night Vision Device SN 2936D (NVDs function); appears complete tool/cleaning kit with cleaning rod; sling; suppressor case and wrap (SUPPRESSOR IS NOT INCLUDED!); bipod; cold bore shot target; instructions; iM3200 Storm case.
Never had a chance to hunt prairie dogs in the American west? Then check out this video. Dan Eigen (aka “Walleye Dan”), host of the We Love It Outdoors Television series, head to South Dakota for some varmint hunting. Dan teams up with Varmint Hunter Association President Jeff Rheborg to patrol some South Dakota Dogtowns where things get serious. In the video, you’ll see p-dog hits at distances from 70 yards to roughly 450 yards. The hunters were shooting from portable, wood-topped swivel rests, using AR-platform rifles on X-type sandbag rest. (Rifle zeroing session is shown at the 5:30+ mark.)
Multiple cameras were employed so you can see both the shooter’s POV and close-ups of the prairie dogs downrange. Watch the shooters having fun with a prairie dog cut-out and some Tannerite at the 9:00-minute mark. This guys are having a grand old time sending critters to Prairie Dog Heaven — we think you’ll enjoy the video.
Prairie Dog Hunting Starts at 2:00 Time-Mark in Video:
NOTE: This video actually covers three sequences: 1) Three-gun training; 2) Prairie Dog Hunting; and 3) Coyote Hunting. We’ve embedded the video so it plays back the Prairie Dog segment from 2:00 to 15:15. If you wish, you can slide the controls forward or back to watch the other segments.
Video found by EdLongrange. We welcome reader submissions.
You can now get $25.00 Off five of Lyman’s top-selling products: BoreCam, Case Prep Xpress, Gen6 Powder Dispenser, Cyclone Rotary Tumbler, and AutoAdvance Target. With Lyman’s Summer Mail-In Rebate Program, you can earn a $25 rebate per select item bought from any Lyman dealer, online or direct from the Lyman website. Items must be purchased between June 9 and August 31, 2017 to qualify. CLICK HERE for the Rebate Redemption Form.
Products included in this Sizzling Summer Rebate Program include:
Case Prep Xpress (Item #7810220)
Borecam Borescope (Item #04055)
Cyclone Rotary Tumbler (Item #7631550)
Gen6 Compact Digital Powder System (Item #7750550)
AutoAdvance Remote Control Target System (Item #4320051)
Just to be clear, the Lyman Products Rebate allows you to get $25 back for EACH qualifying product. For example, if you bought the BoreCam, Cyclone Tumbler, AND the Case Prep Xpress, you would get $75.00 back total. The original receipt and completed redemption form must be postmarked by September 30, 2017 and mailed to: Lyman Products Corp., 475 Smith St., Middletown, CT 06457, ATTN: Summer Rebate.
“With proof of purchase, our customers can receive $25 back per select item bought. All our customers have to do is send in the rebate form with receipt and they’ve got it all — great new gear AND money in their pocket!” said Elizabeth Friedmann, Lyman’s Marketing Sales Manager
Fine Print: The rebate offer is valid only when a customer purchases a qualifying product from an authorized participating dealer or online retailer. All information on the redemption form must be complete and legible for the order to be processed. If the product is returned, the amount of the rebate will be deducted from any refund or credit. Lyman is not responsible for late, lost or misdirected mail or typographical errors. This offer cannot be combined with any other offer, promotion or program. Delivery of the rebate check will occur approximately four to six weeks from receipt of the completed redemption form. Void where prohibited or otherwise restricted by law. Offer not valid for groups, businesses or organizations. This rebate is valid in the U.S. and Canada only, requiring a U.S. or Canadian shipping address.
.223 Rem — Not A Competitive OptionEmil Kovan Competition History:
“Shoot Like a Champion”. Bryan Litz, author of 
Never had a chance to hunt prairie dogs in the American west? Then check out this video. Dan Eigen (aka “Walleye Dan”), host of the 
