Report based on story by Ashley Brugnone, CMP Writer
Registration for the 2017 National Trophy Pistol and Rifle Matches opened April 1, 2017. The CMP National Matches will take place at Camp Perry, Ohio, six miles west of Port Clinton, during the months of July and August. You can now register on the Civilian Marksmanship Program (CMP) website to claim your spot at this year’s event. CLICK HERE for 2017 NM Calendar.
The National Rifle and Pistol Matches
The 2017 National Matches will include historic pistol and rifle matches such as the President’s 100, National Trophy Individual, and National Trophy Team match. The National Trophy Infantry Match, or “Rattle Battle,” is an event unique to the National Matches and has become a crowd favorite.
The CMP Games Matches include such events as the M1 Garand Match, Springfield and Vintage Military Matches, Vintage Sniper Matches, the M1 Carbine Match, and the Rimfire Sporter Match. The CMP’s Cup Series events kick off the 2017 National Matches, featuring a 4-Man Team Match, 800 Aggregate, and an EIC Service Rifle Match.
Shooting Clinics at Camp Perry This Summer
The Small Arms Firing School (SAFS) will also be held for rifle and pistol enthusiasts this summer. Participants will be taught firearms handling and competition skills by some of the top military shooters in the country. The SAFS courses have been a staple in the National Matches at Camp Perry since 1918. Many other clinics and learning opportunities, taught by qualified professionals, will also be available during the National Matches.
Petrarca Range with Electronic Targets Open to Public
Visitors to Camp Perry are welcome to fire high power and smallbore rifles as well as pistols on the Petraca Range. There you can experience shooting with outdoor electronic targets, also powered by the Kongsberg Technology Systemse. The Petraca range will be open to the publich every Monday from 10 am to 6 pm, all summer.
New Air Gun Electronic Targets
The Gary Anderson CMP Competition Center’s high-tech air gun range is a “must” for any visitor to Camp Perry. The Air Gun Range is open to the public on Marksmanship nights — Tuesday and Thursday evenings from 5-8 pm. Visitors may fire air rifles or pistols for a small fee, with air guns available for loan. The 80-point range features new Kongsberg electro-optical Target Systems targets, installed in November 2016. These state-of-the-art targets employ OpticScore technology using LEDs rather than acoustic sensors.
Directions to Camp Perry:
Spectators Are Welcome at the National Matches
Events are open to the public, and spectators are welcome to observe firing on the Camp Perry ranges at any time. Guests are encouraged to visit Camp Perry and watch the many events held during Match season. The photo below shows spectators watching Pistol events at the 1956 National Matches. That was quite a crowd…
The Civilian Marksmanship Program (CMP) is a federally chartered 501 (c) (3) non-profit corporation. It is dedicated to firearm safety and marksmanship training and to the promotion of marksmanship competition for citizens of the United States. For more information about the CMP and its programs, log onto www.TheCMP.org.
In the hit Hollywood movie “The Patriot”, the hero Benjamin Martin (played by Mel Gibson), tells his sons: “Aim small, miss small”. That advice was given to help his sons survive encounters with the British redcoats, but the “aim small, miss small” mantra can benefit target shooters as well.
We have found that novice and intermediate shooters can often improve their accuracy simply by using targets with smaller, more precise aiming points. Inexperienced shooters can benefit by starting with a large-size aiming circle, and then progressing to smaller and smaller target dots. This lets the shooter increase the challenge as his gun-handling becomes more steady and his aim improves.
Here are two rimfire training targets with “big to small” target circles. Start with the largest circles, then move to the smaller ones in sequence. This systematic drill provides increasing challenge shot-by-shot. Novices often are quite surprised to see their accuracy improve as they move from bigger to smaller aiming points. That provides positive feedback — always a good thing.
Right Click and “Save as” to download printable PDF versions of these targets.
In the world of varmint cartridges, it’s all about speed. Higher velocity delivers flatter trajectories, and more dramatic impacts on critters. To achieve higher speeds, handloaders have experimented with many extreme wildcats — big cases necked down to a smaller calibers. Here we present what may be the most extreme wildcat cartridge of all, the .17 Incinerator — a .50 BMG necked down to .17 caliber. Created by Ammo-One, a custom cartridge company, the .17 Incinerator offers blistering performance. The special lathe-turned 33gr projectiles* exit the barrel at 5883 Feet Per Second — that’s over Mach 5, five times the speed of sound.
Mach 5 is 3836.35 mph at sea level, which equates to 5626.64 Feet Per Second (FPS). The remarkable .17 Incinerator achieves this stunning velocity by burning over 230 grains of powder in a highly modified .50 BMG case. The velocity of this cartridge (still well over Mach 5 at 100 yards) delivers an incredible amount of energy on target. A hit literally vaporizes a varmint, as you can see from the image below.
It takes a special barrel to shoot the .17 Incinerator. Kent Wilson of Ammo-One, who helped develop this extreme wildcat, explains: “The speeds are so great we had to use a custom 3-groove, polygonal-rifling 1:20″-twist barrel to keep the bullets from disintegrating on launch. The polygonal land/groove geometry reduces bullet engraving, which also helps keep the bullets in one piece. Also we must use solids — regular jacketed bullets can’t handle these speeds”.
Even More Speed — the .17 Incinerator Improved
While the .17 Incinerator is commercially available, there is an even more extreme “Improved” version of this case, with a radical 50-degree shoulder that yields even greater case capacity. The .17 Incinerator Improved (17 IN-IMP), shown below, can hold 20 grains more powder, promising velocities approaching Mach 5.5 or 6189.3 FPS. Now that’s really cookin’!
*Because of the ultra-high velocity generated by the .17 Incinerator, solid bullets must be used. Conventional jacketed projectiles would disintegrate before they reached the target.
Vortex Optics and Hornady have joined forces to create what may be the most remarkable new bullet technology in the past 20 years. Vortex has adapted a miniature video system to fit inside the tips of rifle bullets. The micro-sized camera/transmitter was originally developed for miniature spy drones. Vortex cleverly figured out to make these tiny little video cameras work when carried on a spinning projectile launched from a rifle.
The revolutionary bullet-cam is the equivalent of the camera in the nose of a “smart” bomb or missile, but micro-miniaturized. This new technology allows you to literally watch your bullet fly into the target. For long-range shots with extended flight times, the view is mesmerizing. Hunters should be very excited. With the Bullet-Cam, you can record the “shot of a lifetime” on a trophy hunt. One has to commend Vortex for achieving this electro-optical breakthrough. Kudos also to Hornady for incorporating the micro-optics into shootable ammunition.
Vortex Video Shows New Bullet-Cam in Action:
A live feed from the Bullet-Cam streams right to your device for instant viewing. Once the Bullet-Cam hits the target, recording stops and the video is automatically uploaded to the VTX Cloud where it can be shared to social media.
Software Indexing Magic Creates Stable, Viewable Image
How is the image viewable though the bullet is spinning at thousands of RPM? The answer is surprisingly simple — and achieved through software. The bullet RPM is referenced by a microprocessor, so the camera’s software simply snaps a picture of the target every few micro-seconds, when the target is in exactly the same orientation. The lens is spinning, but it only captures visual data once every rotation (i.e. image capture is rotationally-indexed). This “stream of stills” is then blended into the video feed. What the viewer sees is a stable movie as though the camera was mounted on a non-rotating, fin-stabilized projectile. This rotationally-sequenced image-capture process made the whole project possible. We’re told that the Pentagon was so impressed with the technology that it is looking to fit Bullet-Cams into a variety of spin-stabilized ordnance, including artillery shells and large-caliber (.50 BMG) sniper rounds.
Vortex Engineer Ian Klemm, a top F-TR shooter, helped develop the innovative Bullet-Cam. Ian says: “Our goal with … Vortex products is to allow our customers to see things clearly from all vantage points. When it comes to bullet impact though, shooters have had to relay on traditional optics to determine accuracy from long distances. We were determined to provide an additional point of view (POV) to improve precision and overall performance. [We want] shooters to have the most advanced tools in the industry, to achieve the most accurate shots. With the Bullet-Cam you will always know if you are way off or dead on.”
Ten Bucks Per Shot — Great for Hunters
Considering the technology involved, the Bullet-Cam product is suprisingly affordable. A box of ten (10) cam-equipped cartridges is only $99.99. So, for about ten bucks per shot, you can actually see your shots fly downrange and into the target. That’s something that’s never been possible with sporting ammunition. This new technology unlocks a whole new world for precision shooters. And for hunters — the Bullet-Cam literally allows you to record the shot of a lifetime on a trophy animal. You can then share that memorable experience via Facebook, Twitter or other social media.
After you’ve become an NRA Life member what’s next? Well now you can extend your NRA membership into the afterlife, the great beyond. For just five thousand bucks, you can now show your commitment to the Second Amendment for all eternity. The NRA has announced that it will, for the first time ever, offer Perpetual Memberships so you can enjoy being an NRA member from your grave. The new “After-Life” Perpetual Membership confers many benefits, including continuing insurance on firearms in ones estate, NRA-branded headstones (see above), and perpetual magazine subscriptions to a surviving spouse or designated beneficiary. In addition, upon the passing of an After-Life Member, the NRA will donate $100.00 to the NRA program of his/her choice.
How to Become an NRA Member Forever
The NRA After-Life Perpetual Membership has been introduced by the NRA as the request of many current NRA Life members who want a permanent, perpetual affiliation with the NRA. A step-up from the $1500 Life Membership, the new After-Life Membership normally costs $7500.00, but this month the After-Life Membership costs just $5000.00. As a special Promotion in connection with the 146th Annual NRA Annual Meetings and Exhibits in Atlanta, Georgia (April 27-30), the new After-Life Membership will discounted 33% for the entire month of April, 2017. For a mere $5000.00 (after discount) the NRA After-Life Membership secures an individual’s support for the Second Amendment throughout eternity.
Help Defend the Second Amendment in the Future
Many celebrities, business leaders, and avid shooters have NRA Life Memberships. Until today, that was longest-duration NRA membership available. Now, with the introduction of the After-Life Perpetual Membership, current Life Members can secure their affiliation with the nation’s leading gun rights organization for all time, in perpetuity. When you think about it, $5000.00 is a small price to pay for the assurance that you will continue to support freedom and the Second Amendment long after you’re gone.
All NRA After-Life Perpetual Members will receive a handsome yet somber yellow-on-black sweatshirt.
For load development, some guys shoot 3-shot groups. Other guys shoot 5-shot groups, or even 10-shot strings. But for testing its projectiles, Sierra Bullets takes it to another level entirely. A while back Sierra was testing its .30-Caliber 175gr HPBT MatchKing in the Sierra uynderground tunnel. The results are show above — a FIVE HUNDRED Round group!
The tunnel testers sent five full boxes of bullets down-range. Here are 500 Shots shot in a 300 meter tunnel. The group size is 2.82 inches (that’s edge to edge of the farthest shots, less the bullet diameter). This was a pressure/velocity test for a commercial customer. The Cartridge was .308 Win, loaded at 2.800″.The powder was Reloder 15. A 26″ barrel was shot from a return to battery rest. The gun was cleaned every 125 rounds and two foulers shot.
What do you think — could you beat this group from a bench for 500 rounds?
One Facebook poster joked: “500-round group? Everyone knows anything less than 1000-round groups are a waste of time and statistically irrelevant.”
Sierra’s 300 Meter Testing Tunnel
Ever wonder how (and where) Sierra tests its bullets? The answer is underground, in a 300-meter test tunnel located under Sierra’s factory in Sedalia, Missouri. The photo above shows the construction of the tunnel back in May, 1990. Like most bullet manufacturers, Sierra does live-fire bullet testing of its projectiles. Sierra’s 300-meter test range is the longest, manufacturer-owned underground bullet test facility in the world. Sierra offers free tours of the test tunnel as part of Sierra’s Factory Tour Program.
We’ve told fans of Hodgdon H4350 to give Alliant Reloder 16 (RL16) a try. In our tests, Reloder 16 has proven a very promising rival to H4350 for accuracy, low ES/SD, and temp stability.
Now you can get the advantages of Reloder 16 in a slower powder formulated for magnum cartridges — Reloder 26 (RL26). Alliant says RL26’s burn speed falls between that of Reloder® 22 and Reloder® 33. That means it’s slower than H4831 but faster than powders that would suit the .338 Lapua Magnum. Reloder 26 has a high bulk density that allows larger powder charges, and high velocities. RL26 also provides a consistent, controlled response to temperature changes.
We are hearing very good things about RL26 from friends and Forum members who are testing it with big calibers for Long Range applications. Accuracy is good and velocities are impressive. Alliant says RL26 “incorporates EI® technology to produce extremely high velocities in magnum cartridges”. In big magnums, shooters have reported gaining 100+ fps with RL26 compared to H1000 or Retumbo. And to our surprise some guys have even tried replacing H4350 with RL26 (in smaller cartridge types) and they have picked up meaningful velocities. We don’t think Alliant ever intended RL26 as a substitute for H4350, but if you’ve got the case capacity… it may be worth a try.
Alliant Reloder 26 Features
EI® technology delivers high velocities in magnum cartridges
Contains proprietary de-coppering additive
Controlled temperature stability
Excellent lot-to-lot consistency
Formulation contains no DNT or DBP
Made in Switzerland for Alliant Powder
Alliant’s Tech Expert Talks about Reloder 26
What are the characteristics of Reloder 26? That question was answered recently by Paul Furrier who works for ATK, the parent company of Alliant Powders. Posting in our Shooters’ Forum, Paul writes:
“Reloder 26 is produced in Switzerland by our extremely capable partner Nitrochemie. I have seen it stated that they [it is] made by Bofors, so that is incorrect. I have also noticed people are equating … Reloder 26 to Reloder 25. Reloder 26 is definitely slower burning than Reloder 25, so there shouldn’t be any confusion there either.”
Speed and More Speed with RL 26
Think of Reloder 26 as a high-velocity powder for big cartridges. Furrier explains: “Reloder 26 is produced with Nitrochemie’s latest generation EI® process technology. This is the same impregnation coating process used to produce Reloder 17, Reloder 33, and Reloder 50 for us, and it is fantastic. Reloder 26 [offers] great ballistic efficiency, high bulk density so you can get more of the slow powder into the case to harness the energy, and decent, predictable extreme temp response. Reloder 26 is not as flat at temps as the TZ or Australian materials, but it is very manageable, usually in the 0.5 fps/°F range (depending on the application). Just as important, the pressure increases at hot are very manageable. We are using quite a bit of this RL26 powder in our Federal factory ammo due to the fantastic ballistics and accuracy.” — Paul Furrier, ATK
Kelly McMillan hosts three top shooters on his Taking Stock Radio Show this Friday, March 31, 2017. The broadcast will feature ace shooters from three long-range disciplines: Dan Bramley (F-Open), Ian Klemm (F-TR), and Nancy Tompkins (Palma/Sling). Kelly says: “Friday’s show will be awesome. Shooters from F Open, F-TR and Palma/Sling competition will join us to talk about their specific disciplines.” During this week’s Radio Show these three top Long Range competitors will share their experiences and offer some winning tips for other competitive shooters.
The Radio show runs 3/31/2017 at 11:00 AM Pacific Time on VoiceAmerica Sports Channel
The ‘First Lady’ of American Long-Range Rifle Shooting, Nancy Tompkins
Ian Klemm (second from right) with Berger SWN-winning North-by-Southwest F-TR team.
About McMillan Fiberglass Stocks
Kelly McMillan is the president of McMillan Fiberglass Stocks (MFS). This company began in 1973 whn Gale McMillan starting crafting benchrest stocks at home in his carport/garage. In 1975 MFS hired its first employee, Kelly McMillan.
By 1979 Kelly was made a partner, and by 1984 Kelly was in charge of running the stock shop. Since that time MFS has continued to grow with innovation and design. Today McMillan Fiberglass Stocks has a 15,000 sq. ft. facility and 65 employees. MFS manufactures around 12,000 stocks per year, most of which are individual customers ordering one custom built stock at a time.
While “naked” bullets are just fine for most applications, some shooters like to put a friction-reducing coating on their projectiles. Coating bullets can benefit guys who run very high round counts between barrel cleanings. Reader Mike Etzel has come up with a simple, cost-effective way to apply HBN, Moly, or Danzac (WS2) coatings to your bullets. And you won’t need any expensive gear other than your regular vibratory tumbler and some small plastic containers.
Mike explains: “For a number of years I have been using a very convenient way of coating my projectiles with DANZAC in a tumbler. Instead of using a separate tumbler filled with DANZAC and stainless steel balls for coating applications, use small resealable plastic cake or pudding cups filled with stainless balls and DANZAC. Each cup will accommodate between 20 to 70 projectiles depending on caliber once the polishing balls and DANZAC are added. When I need to polish some cases, I insert the sealable plastic container(s) into the polishing material in the tumbler, add cases to the media, and in the process clean cases and coat the projectiles simultaneously in one tumbler. This does two operations in one session, saving on time and resources.”
While Mike uses DANZAC (Tungsten DiSulfide or WS2), you can use the same impact-tumbling method to moly-coat your bullets, or to apply HBN (Hexagonal Boron Nitride).
TIPS for COATING your BULLETS, by GS Arizona
1. Start with Clean Bullets. This is simple enough, but some people overlook it and others overdo it. Get the bullets out of the box, wash them with warm water and dish soap and dry them. No need for harsh chemicals, after all, we’re only removing some surface dirt from shipping and maybe some left over lanolin from the forming process. Don’t handle them with bare hands once they’re clean, your skin oils will contaminate them.
2. Get Everything Hot — Real Hot. This is probably the single most important element in producing good-looking moly-coated bullets. I put the tumbler, the drum and the bullets out in the sun for at least 30 minutes before starting and then do all the tumbling in direct sunlight. On a summer day in Arizona, everything gets to the point that its uncomfortably hot to handle. If you are tumbling in the winter, you should heat the bullets in some form, a hair dryer can be useful, but they will cool off in the drum if you’re tumbling in cold temperatures. Your best bet is to plan ahead and do your coating in the summer. I coated about 3000 bullets in a couple of days recently to see me through our winter season (we’re a bit reversed from the rest of the country in terms of shooting season).
The new 38th Edition of the Blue Book of Gun Values is slated for release on April 1, 2017. You can currently pre-order the price guide through Amazon.com. The Blue Book of Gun Values by S.P. Fjestad is the leading gun valuation resource. There are now 1.6 million copies in circulation worldwide.
Blue Book of Gun Values, 38th Edition
Publication Date: April 1, 2017
2512 Pages with 30,000 gun descriptions, and 175,000+ Prices
Over 1500 Makes Covered
This new edition contains updated values for countless firearm types. 2017 makes and models have been included, along with important pricing updates on many current and discontinued models. This new edition contains significantly updated values and information reflecting changes in the gun industry.
CD-ROM and Online Subscription Options
You can also purchase the latest 38th Edition of the Blue Book in Flash Drive format. Also, all the data in the 38th Edition is available via an Online Subscription. To subscribe or buy the Flash Drive, visit Bluebookofgunvalues.com.
Features of the new Blue Book of Gun Values:
· Important pricing updates on major trademark current, antique, and discontinued models, including Colt, Winchester, Smith & Wesson, and Sturm Ruger.
· 2017 makes and models have been included, with many new handgun and rifle products from many manufacturers.
· 2,512 Pages of content includes nearly 1,500 manufacturers and trademarks, almost 30,000 gun model descriptions, and over 175,000 prices.
· More information, more values, and more history than any other guide on the market, by far!
Sample Page from Blue Book of Gun Values:
Review by Tom Gresham, Gun Talk Radio Host
“At some point, every gun owner asks the question, ‘What’s it worth?’ The leading reference for decades has been the Blue Book of Gun Values. Whether you are a seller, a buyer, a shopper, or just curious, this constantly-updated gold mine of research is your friend.”
In the hit Hollywood movie “The Patriot”, the hero Benjamin Martin (played by Mel Gibson), tells his sons: “Aim small, miss small”. That advice was given to help his sons survive encounters with the British redcoats, but the “aim small, miss small” mantra can benefit target shooters as well.
While “naked” bullets are just fine for most applications, some shooters like to put a friction-reducing coating on their projectiles. Coating bullets can benefit guys who run very high round counts between barrel cleanings. Reader Mike Etzel has come up with a simple, cost-effective way to apply HBN, Moly, or Danzac (WS2) coatings to your bullets. And you won’t need any expensive gear other than your regular vibratory tumbler and some small plastic containers.
2. Get Everything Hot — Real Hot. This is probably the single most important element in producing good-looking moly-coated bullets. I put the tumbler, the drum and the bullets out in the sun for at least 30 minutes before starting and then do all the tumbling in direct sunlight. On a summer day in Arizona, everything gets to the point that its uncomfortably hot to handle. If you are tumbling in the winter, you should heat the bullets in some form, a hair dryer can be useful, but they will cool off in the drum if you’re tumbling in cold temperatures. Your best bet is to plan ahead and do your coating in the summer. I coated about 3000 bullets in a couple of days recently to see me through our winter season (we’re a bit reversed from the rest of the country in terms of shooting season).
