Here’s a tip for guys who shoot the 6 PPC, 6 Dasher, or other wildcat cartridges that require fire-forming. Use your fouler shots to fire-form new cases. That way your fouler shots do “double-duty” and you get your brass fire-formed without putting extra rounds through your expensive barrel.
This procedure is recommended by Joel Kendrick, the 2004 IBS 600-yard Shooter of the Year. After he cleans his barrel, Joel knows it takes two or three shots to foul in the bore before accuracy returns. When shooting his PPC, Joel uses those fouler shots to fire-form his new brass. Joel explains: “I like to have relatively new brass always ready. By fire-forming a couple cases after each barrel-cleaning during a match, by the end of the weekend I’ve got a dozen or more freshly fire-formed cases to put into the rotation. If you do this with your fouler shots you get your fire-forming accomplished without using up any extra barrel life.”
We thank Joel for this smart suggestion. For those who do not have a dedicated barrel for fire-forming, this should help keep your round-count down. Joe currently works as the Supplier Quality Process Engineer for MMI-TruTec, a company that offers barrel surface coatings that can further extend your barrel life.
Most bolt-action rifle shooters work the bolt with their trigger-pulling hand. This is because most rifles sold to right-handed shooters come with right-side bolts, while “lefty” rifles come with left-side bolts. This “standard” configuration requires the shooter to take his dominant, trigger-pulling hand off the stock to cycle the bolt, then re-position his hand on the stock, and “re-claim” the trigger. Often the shooter must lift or move his head to work the bolt, and that also requires him to re-establish his cheek weld after each and every shot. Not good.
This really doesn’t make much sense for precision shooting with fore-end support*. There is a better way. If you leave your trigger hand in position and work the bolt (and feed rounds) with the opposite hand, then you don’t need to shift grip and head position with each shot. All this requires is a weakside-placed bolt, i.e. a left bolt for a right-handed shooter or a right bolt for a left-handed shooter. The video below shows a “Lefty” working a right bolt. Note how efficient this is:
As our friend Boyd Allen explains: “If you think about it, if you are going to work with a factory action where your options are left bolt and left port or right bolt and right port, and you are building a rifle that will only be shot from a rest, using the left/left for a RH shooter or using a right/right for a LH shooter works better than the conventional configuration”.
Shoot Like a Champ and Work the Bolt with Your Weakside Hand
Derek Rodgers, the only person to have won BOTH F-Open and F-TR National Championships, runs this kind of “opposite” bolt set-up, shooting right-handed with a left bolt. Though Derek is a right-hander, he shoots with a Left Bolt/Left Port (LBLP) action. He shoots with his right hand on grip, while manipulating the bolt (and feeding rounds) with his non-trigger-pulling hand. He pulls the trigger with his right index finger, while working the left-side bolt with his left (weakside) hand. This allows him to stay in position, and maintain his cheekweld.
2013 National Championship-Winning Derek Rodgers Left Bolt/Left Port Rifle.
*For true standing, off-hand shooting (whether in competition or on a hunt), a conventional strongside bolt placement makes sense, since the non-dominant arm must support the front of the rifle all the time. When shooting from bipod or rest, it’s a different story.
If you have a Remington bolt-action rifle, you may qualify for a trigger upgrade, a voucher, or reimbursement of costs spent changing out your trigger mechanism.
These benefits result from the settlement of a class action lawsuit which alleged that Remington trigger mechanisms with “trigger connectors” and X-Mark Pro® triggers could have accidental discharges without the trigger being pulled. The settlement involves two classes. The first class includes owners of firearms that utilize a trigger connector. The second class includes owners of firearms that utilize the X-Mark Pro trigger mechanism that is the subject of a voluntary safety recall. The settlement allows owners of Remington models 700, Seven, and related models to have their trigger replaced free of charge, among other benefits.
WHO IS INCLUDED?
The Settlement provides benefits to: Current owners of Remington Model 700, Seven, Sportsman 78, 673, 710, 715, 770, 600, 660, XP-100, 721, 722, and 725 firearms containing a Remington trigger mechanism that utilizes a trigger connector; Current owners of Remington Model 700 and Model Seven rifles containing an X-Mark Pro trigger mechanism manufactured from May 1, 2006 to April 9, 2014 who did not participate in the voluntary X-Mark Pro product recall prior to April 14, 2015; and Current and former owners of Remington Model 700 and Model Seven rifles who replaced their rifle’s original Walker trigger mechanism with an X-Mark Pro trigger mechanism.
WHAT DOES THE SETTLEMENT PROVIDE?
Settlement Class Members may be entitled to: (1) have their trigger mechanism retrofitted with a new X-Mark Pro or other connectorless trigger mechanism at no cost to the class members; (2) receive a voucher code for Remington products redeemable at Remington’s online store; and/or (3) be refunded the money they spent to replace their Model 700 or Seven’s original Walker trigger mechanism with an X-Mark Pro trigger mechanism.
HOW CAN I OBTAIN BENEFITS?
If you are in the affected class you can submit a claim form electronically by clicking the link below:
Even if you do nothing you will be bound by the Court’s decisions. To keep your right to sue the Defendants yourself, you must exclude yourself from the Settlement Class by November 18, 2016. If you stay in the Settlement Class, you may object to the Settlement by November 18, 2016. For more info, or to make a claim, call 1-800-876-5940 or visit www.remingtonfirearmsclassactionsettlement.com.
Are you from a Northern state that’s snowbound in the winter? Looking for a fun December diversion (and a break from cold weather)? Then consider a trip to Talledega, Alabama. This December, the Civilian Marksmanship Program (CMP) hosts the Second Annual Talladega 600, “A Southern Classic”, at the Talladega Marksmanship Park. This event for rifle, pistol, and shotgun shooters kicks off Tuesday, December 6, 2016, and concludes Sunday, December 11th. It should be fun for the whole family. For more info, visit the Talladega 600 Webpage.
Competitors of all ages and skill levels are welcome at the Talladega 600. Events will include popular CMP Games Matches: Garand, Springfield, and Vintage Military Match, as well as the Vintage Sniper, Carbine and Rimfire Match. There will be a Small Arms Firing School with an M16 Match, the Congressional 30 (similar to President’s Rifle Match), the Dixie Double Highpower Match, and an EIC Rifle Match. Pistol events will include the .22 Rimfire EIC Pistol Match, the Service Pistol EIC Match, the As-Issued 1911 and the Military & Police Matches. Shotgunners can enjoy a Sporting Clays Shoot and a 5-Stand Shoot.
Talladega Marksmanship Park
The 500-acre CMP Talladega Marksmanship Park is one of the most impressive shooting venues in North America. Talladega boasts superb facilities and state-of the-art electronic target systems. Each rifle firing point is equipped with a modern KTS electronic target and scoring monitor. Located beside each shooter on the firing line, these monitors allows competitors to see shot locations and scores instantly — no more waiting for targets to pulled and then marked with with a spotter disc.
For spectators following the action, large monitors inside the comfortable 13,000-square-foot Clubhouse will display scores from the shooting matches as they are being fired. Scores are also viewable online through the CMP’s Competition Tracker.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Amazon — Caldwell Long Range Target Camera System, $349.49
Forum members have purchased this Caldwell Target Cam System and they’ve found that it works reliably, providing a clear signal to any WiFi-enabled mobile device (smartphone, iPad, Laptop). One member specifically tested the unit at 1000 yards and it functioned fine. NOTE: This system does NOT have a zoom camera lens, so you need to position the camera within 10 yards or so of the target. But if you place it to the side a bit, this shouldn’t be a problem. This system comes with a nice, fitted carrying case that holds camera, transceivers, antennas, and stands. You get a very capable system for under $350.00 (Amazon price includes free shipping for Prime members). You can also get this system from Midsouth for $357.02 (shipping extra).
2. Midsouth — Lyman BoreCam Digital Borescope, $222.46
Note: We are repeating this special because it is the best deal we’ve found on an excellent product in high demand. The Lyman BoreCam is an electro-optical borescope with a digital display. You can record “stills” on a SD card. This is one of the hottest products on the market right now — and users really like the BoreCam (although some wish the digital view-screen was larger). Midsouth Shooters Supply now has the Lyman BoreCam for $222.46. Grab it while you can at that price. Other online vendors are charging a LOT more (e.g. MidwayUSA price is $259.99).
We like reactive targets. It’s fun to “ring steel” and see a target move instantly when hit. For just twenty bucks (including shipping), it’s hard to go wrong with this 8″ AR500 Steel Gong. The 8″-diameter size is big enough for zeroing at 200 yards, yet offers a nice challenge at 500 yards and beyond. There is also a 6″-diameter model for $16.00.
Here’s a rifle with a smooth three-lug action and good trigger that can take any game in North America. The Browning A-Bolt is justifiably respected as a solid hunting rifle. The 300 Winchester Magnum chambering offers serious hitting power, even at long range. This rifle, with a blued barreled action, normally retails for $600.00+. Now it’s on sale for under $500.00. To sweeten the deal even more, right now Browning is offering $50 CASH BACK on Browning centerfire rifles purchased between August 1, 2016, and September 30, 2016. CLICK HERE for $50.00 REBATE FORM.
5. ULINE.com — 200 Pairs of NRR32 Ear Plugs for $19.00
Every shooter needs good hearing protection, and when you buy in bulk you can save big. Right now Uline.com is offering 200 pairs of NRR32-rated tapered foam ear plugs for $19.00. That’s a steal. Corded (linked) models are $36.00 for 200 pairs. This Uline offer is a great way to supply your local shooting club or youth marksmanship training program. NOTE: This deal expires 10/9/2016.
This is quality, CCI made-in-USA ammo with reloadable, brass casings. We have used this CCI-made Blazer 9mm ammo in Sig, HK, and Glock pistols and it performed very well. This stuff won’t last long at this price (less than $0.20 per round). If you need 9mm practice ammo, order soon — this very same 1000-round case of Blazer 9mm ammo costs $60.00 more at MidwayUSA. Blazer Brass is loaded in boxer-primed, reloadable brass cases for added value.
Here’s a good deal on the new Lyman 50th Ed. Reloading Manual. Our Forum members have rated this as the best Loading Manual for starting hand-loaders. This 50th Edition, the first to be produced in full color, includes more load data, and covers more cartridge and bullet types than ever before. This handbook has a strong heritage, starting with the Ideal/Lyman reloading manuals from the early 20th Century. Midsouth offers an excellent price — MidwayUSA sells this for $24.99.
Every gun owner should have a work mat to protect valuable firearms during cleaning and maintenance operations. Right now you can get a quality 36″x16″ mat for under ten bucks. The non-slip polyvinyl chloride (PVC) surface won’t harm gun’s finish, and its absorbent features keep the fluids from going through your work surface. This week Amazon is offering the Printed Version (shown above) for $9.99 and a Plain Black Version for just $8.09. That’s an excellent value either way.
Over the past few years, participation in F-Class competition has grown dramatically. At the 2013 SHOT Show we had a chance to talk about F-TR competition with then-U.S. National F-TR Team members Mike Miller and Stan Pate, two of America’s top F-TR shooters. With the U.S. F-Class Nationals underway this week (in Lodi, Wisconsin), we are reprising this interview for readers who may have missed it the first time around. If you shoot F-TR (even if you’re a High Master), we think you’ll learn a few things from this interview.
In this interview, Mike and Stan agreed to share their vast store of knowledge about long-range shooting. In a wide-ranging dialog, we discussed many topics of interest to F-Class shooters: position set-up, bipod shooting techniques (and hardware), gun-handling, and bullet selection. In addition, Mike and Stan offer some great advice on wind reading and precision reloading. These general tips will benefit all competitors, no matter what their discipline.
Watch Video for Tips from past U.S. National F-TR Team Members Mike Miller and Stan Pate
If you shoot F-TR or you are considering getting involved in this fast-growing shooting sport, definitely watch this 14-minute video interview from start to finish. Mike and Stan are true F-TR gurus whose knowledge of the F-TR game has been gleaned from years of top-level competition. If you shoot a .308 from a bipod, we guarantee you can learn much from Mike and Stan. If you follow their advice, we bet you’ll see your scores improve in future matches.
You have to love Texas. While in other states (such as California) gun rights are under attack, in Texas, gun ownership is cherished and even celebrated…
Proof is the Texas Firearm Festival (TXFF), a celebration of shooting where you can “try and buy” the latest guns and gear. This isn’t your run-of-the-mill gun show. At the Texas Firearms Festival, the biggest “hands on” firearm exhibition in North America, you can “test drive” dozens of new firearms from top manufacturers including: FN, Sig Sauer, STI, Walther Arms, Remington, Taurus, Blaser, Henry Repeating Arms, Bergara, Benelli, Wilson Combat and more.
The TXFF takes place October 14-16 at the Best of the West Shooting Range in Liberty Hill, Texas, just outside Austin. The Third Annual Texas Firearms Festival is a two-day event where firearms enthusiasts can try and buy guns and gear from leading manufacturers. Saturday and Sunday ammo is all free! And with some of Austin’s best food trucks and exhibits, the festival is great for the whole family.
Here are video highlights from last year’s Texas Firearms Festival (loud volume):
Retail Village Showcasing the Best in Ammo and Accessories.
Full Auto Friday on Friday, October 14th for VIP Ticket Holders.
Ammunition Provided to Ticket Holders.
Ticket Options and Prices
The Festival isn’t free — but the price is more than reasonable considering the hours of fun you can have. A one-day pass, which includes the cost of ammo, is $79.00. A weekend pass for two full days of shooting is $119.00 (ammo included). There is also a $275.00 VIP Package which includes Full Auto Friday. And non-shooter tickets are available for $25.00. Purchase tickets at TexasGunFest.com/ticket.
Festival Location and Directions
The Festival will be held at the Best of the West Shooting Range in Liberty Hill, Texas. The address is 19500 W. SH 29, Liberty Hill, TX 78642. For driving directions, use this interactive Google map:
Did you know that Shilen Rifles Inc. offers barreled actions and complete rifles? And that Shilen offers a Savage-style, barrel-nut system for its Rem-clone actions? After several years of development, Shilen now offers custom actions ($950.00), barreled custom actions with triggers ($1500.00), and complete rifles ($3200.00 and up).
The new Shilen custom actions are CNC-milled from high-grade stainless steel. Two types are offered — the multi-shot DGR (Repeater) or the single-shot DGV (Varminter) action. Both actions will be offered in most common bolt faces and both right-hand and left-hand actions are immediately available. The DGR and DGV actions have a 1.350″ diameter with 8-40 scope base mounting screw holes, and an 0.300″ pinned recoil lug. The spiral-fluted bolts feature a floating bolt head with an interchangeable bolt handle knob. These actions feature a footprint similar to the Remington Model 700. Both DGR and DGV actions will accept many aftermarket components crafted for Rem-700 style actions, including triggers and bottom metal.
Barreled Actions with Barrel-Nut System for Easy Barrel Exchanges
Along with the stand-alone DGR and DGV actions, Shilen is offering barreled action assemblies, chambered and ready to drop into Rem 700-inletted stocks. The actions are fitted with Shilen match-grade barrels and Shilen triggers. The barrels feature a 1-1/16″x20 barrel thread and are attached to the action by a barrel nut. This Savage-style barrel nut system simplifies headspacing, allowing easy swapping from one barrel to another. With the simple barrel-exchange procedure, you can shoot multiple chamberings with a single action/rifle. For example, shooters can change from a .223 Remington to a .204 Ruger or a .22-250 to a 6mm BR in a matter of minutes.
Complete Rifles with McMillan Stocks
With Shilen’s complete rifles, buyers can choose their chambering, and select barrel and stock configuration. Shooters can choose between a sporter weight wood stock or a variety of McMillan fiberglass stocks. With all complete rifles, the entire package is delivered in a quality gun case and Shilen even includes table mat, cleaning rod, bore guide, jag, bore brush, and cleaning patches. For more info, call (972) 875-5318 or email comments@shilen.com.
Today, September 24th, is National Hunting and Fishing Day. To help mark that event, we’re reprising a story from Europe that showcases the beauty of nature that can be experienced on a hunting trip.
If you need a break from your hum-drum day at the office, how about taking a virtual vacation to Norway, where you can explore the scenic mountains in the Fjord region?
Forum member Kenneth Skorpen (aka “Sal”) has created a cool video of a deer-hunting trip he took in Norway. He didn’t bag a buck on this trip, but the walk in the Fjordland mountains took Kenneth through some spectacular scenery. (At the 11:25 time mark you’ll see an amazing sunset over the Fjord.) Kenneth did encounter a doe that had fallen down the mountain, and apparently broken its neck (14:35 time mark). The terrain is very steep, and Kenneth observed that: “I feel fortunate to be able to do this, but I also feel very tired in my legs. Did you know that the hares around here have shorter left legs due to the steep hills?”
More Hunting/Shooting Videos from Norway
You can watch more interesting hunting and shooting videos from Norway on Kenneth Skorpen’s Streken Vertebrae YouTube Channel. Here are some links:
And here is another Skorpen video showcasing beautiful Norwegian landscapes. This was filmed during a February rifle testing session with targets at 1100 and 1400 meters. You’ll see some stunning snow-capped scenery here, starting at the 4:30 time mark.
Today, September 24th, is National Hunting and Fishing Day. If you are a serious hunter (or aspire to be) here are two resources you should definitely add to your library. Written by a lifelong New Zealand hunter with a wealth of field experience, the Practical Guide to Hunting Cartridges tells you what you need to know about hunting cartridge performance. In no-nonsense terms, this book reveals how various rounds actually perform in a wide variety of game species. Nathan’s first book, The Practical Guide to Long Range Hunting Rifles, is a classic — one of the best books ever written on choosing and using a hunting rifle. We recommend booth books highly.
If you really want to learn about long-range hunting, listen to a pro like Nathan Foster who has spent decades in the wild, harvesting over 7500 head of game. His classic guide to Hunting Rifles analyzes what you need in a hunting firearm and compares various action/stock/barrel/scope options. This book also provides some practical stalking and shooting tips for hunters. Nathan’s 415-page companion book on Hunting Cartridges guides you through the process of choosing cartridge and projectile(s) for your hunts. Nathan examines the pros and cons of various cartridges so that the reader can select the best cartridge and projectile to get the job done. This book represents years of first-hand research, testing scores of calibers/loads in the field.
Nathan is truly a hunting expert. Nathan has spent thousands of hours in the field and he knows the subject cold. Unlike some outdoor writers, Nathan doesn’t pull punches — he tells the unvarnished truth about what works and what doesn’t. Here’s what Nathan says about these two books:
For several years, I have received two types of email. The first question is which is the right rifle for me? The second question is which is the right cartridge? My first book dealt with the accurate rifle. This second book deals with long range hunting cartridge selection. I firmly believe that there has been a huge gap in education regarding optimal long range hunting cartridge performance. In many instances, both hunters and bullet manufacturers do not understand what’s required to achieve goals. Many times, the wrong tools are used for long range hunting. This book seeks to remedy these problems.
In the Practical Guide to Long Range Hunting Cartridges, I start with the fundamentals of game killing — but from the perspective of the long range hunter (also encountering close range shots). This section is not politically correct in any way, as after the study of anatomy, I explore worst case scenarios in as much depth as ideal shot placement.
The second section of the book is a study of projectile design. I wanted to get right down to the finer details of the long range hunting bullet in this section, exploring manufacturers, manufacturing techniques, and ways in which the end user can perform preliminary testing as well as bullet modifications.
The third section explains how to select a long range hunting cartridge. The system I have used here is based on a selection method I developed over the years to help clients worldwide. This method takes individual circumstances into consideration rather than a one-size-fits-all approach. It is a system that relies on plain common sense based on research. The fourth section of the book is the cartridge section. Cartridge information is presented in a set format with Pro/Con summary tables. In many instances I have included my own load notes.
About the Author: New Zealander Nathan Foster lives and breathes what he teaches. An expert in the field of terminal ballistics, Nathan has taken over 7500 head of game, and has field-tested a vast number of cartridges and projectiles. Nathan’s first book, The Practical Guide to Long Range Hunting Rifles, is widely recognized as one of the best books ever published on the subject. The new book goes into greater detail on specific cartridges. Nathan’s website includes an outstanding online cartridge knowledge base with over 60 detailed cartridge profiles. CLICK HERE for Cartridge INFO.
Nathan runs Terminal Ballistics Research, a small company in Taranaki, New Zealand, that conducts cartridge and projectile performance research. Nathan also operates a long-range shooting school. Nathan is also the creator of MatchGrade Bedding Products.
Here’s a tip for guys who shoot the 6 PPC, 6 Dasher, or other wildcat cartridges that require fire-forming. Use your fouler shots to fire-form new cases. That way your fouler shots do “double-duty” and you get your brass fire-formed without putting extra rounds through your expensive barrel.
Over the past few years, participation in F-Class competition has grown dramatically. At the 2013 SHOT Show we had a chance to talk about F-TR competition with then-U.S. National F-TR Team members Mike Miller and Stan Pate, two of America’s top F-TR shooters. With the U.S. F-Class Nationals underway this week (in Lodi, Wisconsin), we are reprising this interview for readers who may have missed it the first time around. If you shoot F-TR (even if you’re a High Master), we think you’ll learn a few things from this interview.
If you need a break from your hum-drum day at the office, how about taking a virtual vacation to Norway, where you can explore the scenic mountains in the Fjord region?
For several years, I have received two types of email. The first question is which is the right rifle for me? The second question is which is the right cartridge? My first book dealt with the accurate rifle. This second book deals with long range hunting cartridge selection. I firmly believe that there has been a huge gap in education regarding optimal long range hunting cartridge performance. In many instances, both hunters and bullet manufacturers do not understand what’s required to achieve goals. Many times, the wrong tools are used for long range hunting. This book seeks to remedy these problems.
About the Author: New Zealander Nathan Foster lives and breathes what he teaches. An expert in the field of terminal ballistics, Nathan has taken over 7500 head of game, and has field-tested a vast number of cartridges and projectiles. Nathan’s first book, 
