|
|
December 21st, 2013
 Norma is making a big push to expand its presence in the North American market. As part of this effort, Norma is introducing seven (7) new types of cartridge brass for 2014. We’re pleased to report that Norma-USA will be importing top-quality brass for the 6.5 Grendel, and 6.5 Creedmoor, two popular target cartridges. In addition, for 2014, Norma will offer 7mm RUM, 7mm Blaser Magnum, 300 AAC Blackout (300 BLK), .300 RUM, and the .338 Blaser Mag. The Norma brass we have shot in other chamberings (6 PPC, 6mmBR Norma, 6XC, .243, 7mm RSAUM) has all been excellent, giving good accuracy. Case weights were very consistent and the neck-wall thickness was very uniform, particularly with the PPC and BR brass. The new 300 BLK brass is an important offering for AR shooters. (NOTE: You can also make 300 BLK cases from Norma or Lapua .221 Fireball brass).
Though the annealing “shadow” may not be as visible as with Lapua brass, the case necks of Norma brass cartridges are indeed annealed near the end of the manufacturing process. This assures more consistent neck tension — something critical to accuracy. Most of the new cartridge brass offerings should be be available at vendors by early April, 2014. You can get Norma brass from Bullets.com, Grafs.com and Midsouth Shooters Supply, as well as many other online vendors.
New Norma-USA Brass Offerings for 2014:
- 6.5 Grendel
- 6.5 Creedmoor
- 7mm RUM
- 7mm Blaser Magnum
|
- 300 AAC Blackout (300 BLK)
- .300 RUM
- .338 Blaser Magnum
|
Product Tip from EdLongrange. We welcome reader submissions.
September 22nd, 2013
Robert Whitley of AR-X Enterprises, LLC builds match-grade uppers for AR-platform rifles. Many of Robert’s favorite chamberings are based on the 6.5 Grendel case necked-down to 6mm. Until 2011, Lapua was the only source for 6.5 Grendel brass. As you’d expect, Lapua’s Grendel brass is truly excellent, but it is also pricey, and sometimes hard to find. Now Hornady is producing USA-made 6.5 Grendel brass. Robert Whitley has worked with the Hornady 6.5 Grendel brass for over a year now and he is able to assess its performance compared to the original Lapua version. Writing in our Shooters’ Forum, Robert reveals: “It’s decent brass but hot loads will loosen the primer pockets fast. With moderate loads you will get good case life and service from the brass and it can deliver excellent accuracy as well. Not Lapua but not bad either.”
Robert reports: “I was able to get my hands on some of Hornady’s 6.5 Grendel brass. My big question was how it would measure up, particularly the loaded necks, and whether it would be compatible with our existing 6mmAR and Turbo 40 die sets. As it turns out, this brass looks like a perfect fit for our existing die sets (and obviously 6.5 Grendel die sets too). Accordingly, folks with existing die sets will be able to use the Hornady brass without any issues.” However, as the loaded neck on the Hornady brass is .001″ (one-thousandth) slimmer than Lapua brass, you may want to try a smaller bushing when sizing Hornady Grendel brass.
The Hornady 6.5 Grendel brass has a LARGE Flash Hole, about .078″ versus .0591″ for Lapua brass. Dimensionally, the biggest difference is the shoulder diameter, with the Hornady brass measuring 0.428″ vs. 0.424″ for the Lapua brass. The Hornady is actually a better fit for 6mmAR chambers which are about 0.432″ at the shoulder. Interestingly, case H20 capacity is virtually identical. Water capacity of new, unfired Hornady 6.5 Grendel brass is 35.1 grains, while new, unfired Lapua Grendel brass holds 35.0 grains of H20. Both brands of Grendel brass increase to about 36.0 grains H20 capacity after firing and full-length sizing.
Here are some of the particulars of the Hornady cases:
| Hornady 6.5 Grendel Brass |
Lapua 6.5 Grendel Brass |
Flash hole diameter: ~ .078″
OAL of brass: Average 1.515″
Weight of cases: 111.7 to 113.0 grains
Web diameter, unfired: 0.4375″
Shoulder diameter, unfired: 0.428″
Loaded neck diameter: 0.2895″
6mmAR loaded neck: 0.270″ |
Flash hole diameter: 1.5mm (0.0591″)
OAL of brass: Average 1.515″
Weight of cases: 111.0 to 112.5 grains
Web diameter, unfired: 0.4385″
Shoulder diameter, unfired: 0.424″
Loaded neck diameter: 0.290″
6mmAR loaded neck: 0.271″ |
February 8th, 2012
Robert Whitley of AR-X Enterprises, LLC builds match-grade uppers for AR-platform rifles. Many of Robert’s favorite chamberings are based on the 6.5 Grendel case necked-down to 6mm. Until 2011, Lapua was the only source for 6.5 Grendel brass. As you’d expect, Lapua’s Grendel brass is truly excellent, but it is also pricey, and sometimes hard to find. Now Hornady is producing USA-made 6.5 Grendel brass. Robert Whitley has worked with the Hornady 6.5 Grendel brass for over a year now and he is able to assess its performance compared to the original Lapua version. Writing in our Shooters’ Forum, Robert reveals: “It’s decent brass but hot loads will loosen the primer pockets fast. With moderate loads you will get good case life and service from the brass and it can deliver excellent accuracy as well. Not Lapua but not bad either.”
Robert reports: “I was able to get my hands on some of Hornady’s 6.5 Grendel brass. My big question was how it would measure up, particularly the loaded necks, and whether it would be compatible with our existing 6mmAR and Turbo 40 die sets. As it turns out, this brass looks like a perfect fit for our existing die sets (and obviously 6.5 Grendel die sets too). Accordingly, folks with existing die sets will be able to use the Hornady brass without any issues.” However, as the loaded neck on the Hornady brass is .001″ (one-thousandth) slimmer than Lapua brass, you may want to try a smaller bushing when sizing Hornady Grendel brass.
The Hornady 6.5 Grendel brass has a LARGE Flash Hole, about .078″ versus .0591″ for Lapua brass. Dimensionally, the biggest difference is the shoulder diameter, with the Hornady brass measuring 0.428″ vs. 0.424″ for the Lapua brass. The Hornady is actually a better fit for 6mmAR chambers which are about 0.432″ at the shoulder. Interestingly, case H20 capacity is virtually identical. Water capacity of new, unfired Hornady 6.5 Grendel brass is 35.1 grains, while new, unfired Lapua Grendel brass holds 35.0 grains of H20. Both brands of Grendel brass increase to about 36.0 grains H20 capacity after firing and full-length sizing.
Here are some of the particulars of the Hornady cases:
| Hornady 6.5 Grendel Brass |
Lapua 6.5 Grendel Brass |
Flash hole diameter: ~ .078″
OAL of brass: Average 1.515″
Weight of cases: 111.7 to 113.0 grains
Web diameter, unfired: 0.4375″
Shoulder diameter, unfired: 0.428″
Loaded neck diameter: 0.2895″
6mmAR loaded neck: 0.270″ |
Flash hole diameter: 1.5mm (0.0591″)
OAL of brass: Average 1.515″
Weight of cases: 111.0 to 112.5 grains
Web diameter, unfired: 0.4385″
Shoulder diameter, unfired: 0.424″
Loaded neck diameter: 0.290″
6mmAR loaded neck: 0.271″ |
October 31st, 2011
At the gun industry writers round-table meeting earlier this month in Kansas City, KS, Alexander Arms made important announcements regarding the 6.5 Grendel Cartridge.
1. The “6.5 Grendel” has been officially approved as a SAAMI Cartridge. (This means that cartridge dimensions will be standardized for the purpose of manufacturing brass, loaded ammunition, pre-fit barrels, and 6.5 Grendel-chambered firearms.)
2. Alexander Arms has officially “relinquished” its trademark claim on the term/label “6.5 Grendel”. This opens the door to other companies offering products (such as ammo, barrels, magazines) which are identified by the 6.5 Grendel moniker.
CLICK HERE for 6.5 Grendel Cartridge History (Wikipedia entry).
Here is the text of Alexander Arms’ Official Press Release:
The 6.5 Grendel is an Official SAAMI Cartridge and Trademark is Relinquished.
The Sporting Arms and Ammunition Manufacturers’ Institute (SAAMI) has adopted the 6.5 Grendel as an official SAAMI cartridge. As a result of the cartridge’s official recognition, Alexander Arms will relinquish the trademark “6.5 Grendel”. Bill Alexander states: “One of the primary purposes of trademarking the name was to protect the integrity of the design. With the adoption of the 6.5 Grendel cartridge standard by SAAMI, the design is now protected, and any confusion in the marketplace as to the specification of the cartridge has been eliminated.”
SAAMI’s formal adoption of the design specifications for the cartridge has led Alexander Arms to announce that it will relinquish its federally-registered trademark and that “6.5 Grendel” to be the common commercial name for a cartridge that adheres to the specifications adopted by SAAMI.
Alexander Arms is proud that a cartridge of its design has received this important designation, and is pleased to take this important step in the continued market development of this breakthrough cartridge, which is perfectly matched to the AR-15 platform.
For additional information contact:
Alexander Arms
wayne@alexanderarms.com
540-639-8356
According to The Firearm Blog, “Hornady submitted the cartridge to SAAMI last year but the application was rejected because Alexander Arms refused to relinquish the trademark.” With the waiver of trademark objections by Alexander Arms, look for greater production of standardized 6.5 Grendel ammo and brass. We can also expect more factory and custom rifles to be chambered in the efficient 6.5 Grendel cartridge. Some gunsmiths had avoided working with this cartridge because of Alexander Arms’ trademark claims. In fact, the were even concerns about sales of “6.5 Grendel” chambering reamers, so some gun-builders developed slightly-different wildcats in order to get around Alexander Arms’ objections. But that is all “old history” now….
May 29th, 2011
Starting June 1, 2011, Satern Custom Machining and Liberty Barrels will no longer produce 6.5 Grendel and .50 Beowolf barrels, as both barrel makers declined to agree to a new, more onerous licensing agreement with Alexander Arms. Satern had produced cut-rifled 6.5 Grendel and Beowolf barrels for the past five (5) years under license to Alexander, while Liberty crafted button-rifled Grendel and Beowolf barrels under license. It may be hard to replace Satern, a highly regarded cut-rifled barrel-maker, as other top-quality barrel makers may likewise reject Alexander Arms’ licensing demands.
Alexander Arms’ Policies Have Impeded 6.5 Grendel Development
Radford, VA-based Alexander Arms continues to paint itself in a corner with respect to the 6.5 Grendel cartridge. Alexander Arms (AA) has aggressively protected the 6.5 Grendel cartridge design, threatening legal action against companies that planned to sell 6.5 Grendel AR uppers, chamber barrels for this cartridge, or even merely offer 6.5 Grendel reamers. One can understand Alexander’s desire to protect its design rights, but many industry experts believe Alexander Arms has gone overboard. Many gun builders and parts markers view the 6.5 Grendel cartridge as a “lawsuit in the making” so they stay away from it. As a result, this accurate and efficient cartridge is not growing in popularity as rapidly as it might otherwise. Alexander Arms has simply made it too difficult to comply with its demands, so many gun makers have decided that they would rather build anything other than a 6.5 Grendel.
Ironically, many shooters have chosen to build guns based on 6.5 Grendel parent brass, but necked down to 6mm. Robert Whitley pioneered a very effective 6mm-6.5 Grendel wildcat he calls the 6mmAR. It shoots great in AR platform rifles, as does a higher-capacity derivative, the 6mmAR “Turbo”. To learn more, visit 6mmAR.com.
October 22nd, 2009
 The 2010 edition of the Hodgdon® Annual Manual has just been announced, and should be at newstands in January 2010. Now in its 7th year, the Hodgdon Annual Manual includes over 5,000 rifle and pistol loads, with information on 56 Hodgdon, IMR® and Winchester® powders. The new 2010 Manual features 44 cartridge updates, brand new data for the 6.5 Grendel and 6.5 Creedmoor, and updated propellant burn rate and usage charts.
Extensive reloading information is provided for popular cartridges such as the 17 Remington, 223 Remington, 204 Ruger, 6PPC, 308 Winchester, 338 Federal and more. In addition, the 2010 Manual includes articles by top gun writers like Layne Simpson and Jim Carmichael plus many other resources for shooters and reloaders.
Articles in the 2010 Hodgdon Annual Manual spotlight the new varmint/match powder, IMR 8208 XBR. Test lots of this new powder have shown truly exceptional temperature stability. In addition, IMR 8208 XBR should deliver excellent accuracy in cartridges such as the 6mm PPC, 6BR, 22BR, and .308 Winchester. Lou Murdica and Jim Carmichael have already recorded impressive benchrest wins with prototype IMR 8208 XBR.
The 2010 Hodgdon Annual Manual costs $8.99 and should be available at newsstands and gun dealers by January 2010. For more on the manual contact Hodgdon at 913-362-9455, visit Hodgdon.com, or write to 6231 Robinson, Shawnee Mission, KS 66202.
|
