Sporter Chronograph Kit includes: Bayonet Sensor, 3.5 foot Data Cable, Remote Display (with Battery), Strap with thumb nut, Two V-block spacers, and compact storage box.
Magnetospeed has just introduced a new bayonet-style chronograph that is less than half the price of previous MagnetoSpeed models. This is big news for shooters who always wanted a MagnetoSpeed but found the $399.00 cost (for V3 model) too pricey. The new Sporter Chronograph will cost just $189.00. It offers most of the features of the more expensive models (see chart below for details) and has a updated sensor. The MagnetoSpeed Sporter chronograph kit was designed to be used on barrels from 1/2 inch up to 1 inch in diameter. In can also accommodate muzzle brakes and flash hiders up to 2.7 inches in length. MagnetoSpeed says its new Sporter is “Ideal for contoured rifle barrels (sporter barrels) and long-barreled revolvers.”
See $189.00 Sporter Chronograph Features Reviewed in Video
MagnetoSpeed Sporter features
Simple, one-button cycling display (shows recent shot velocity and statistics).
Three sensitivity settings for fine-tuning.
Easy access battery compartment, with 9V Battery included.
Integral, quick-attachment system, with metal buckle, nylon strap, screw-in tensioner, and dual V-block spacers (thick and thin).
Bayonet works with Muzzle Brakes and Flash-hiders up to 2.7″ long.
Q: Will the Sporter Chrono work with thicker barrel (i.e. greater than 1″ diameter)?
A: The manufacturer recommends the $399.00 V3 model for thicker barrels. But, wink-wink, if you have a 1.25″ barrel you can get this to work, based on what we’ve seen. If you need to go really fat (up to 2.0″ diameter), get the V3. Magnetospeed also says the V3 is needed for airguns, shotguns, and muzzleloaders.
Click Image for Full-Screen Photo
Share the post "MagnetoSpeed’s New $189.00 Sporter Chronograph"
There is nothing more frustrating (or embarassing) than sending a live round into your expensive new chronograph. As the photo below demonstrates, with most types of chronographs (other than the barrel-hung Magnetospeed), you can fatally injure your expensive chrono if it is not positioned precisely.
When setting up a chrono, we always unload the rifle, remove the bolt and bore-sight to ensure that the path of the bullet is not too low. When bore-sighting visually, set up the rifle securely on the sandbags and look through the bore, breech to muzzle, lining up the barrel with your aim point on the target. Then (during an appropriate cease-fire), walk behind the chronograph. Looking straight back through the “V” formed by the sky-screens, you should be able to see light at the end of the barrel if the gun is positioned correctly. You can also use an in-chamber, laser bore-sighter to confirm the visual boresighting (see photo).
Adjust the height, angle and horizontal position of the chronograph so the bullet will pass through the middle of the “V” below the plastic diffusers, no less than 5″ above the light sensors. We put tape on the front sky-screen supports to make it easier to determine the right height over the light sensors.
Use a Test Backer to Confirm Your Bullet Trajectory
You can put tape on the support rods about 6″ up from the unit. This helps you judge the correct vertical height when setting up your rifle on the bags. Another trick is to hang a sheet of paper from the rear skyscreen and then use a laser boresighter to shine a dot on the paper (with the gun planted steady front and rear). This should give you a good idea (within an inch or so) of the bullet’s actual flight path through the “V” over the light sensors. Of course, when using a laser, never look directly at the laser! Instead shine the laser away from you and see where it appears on the paper.
Alignment of Chronograph Housing
Make sure the chrono housing is parallel to the path of the bullet. Don’t worry if the unit is not parallel to the ground surface. What you want is the bullet to pass over both front and rear sensors at the same height. Don’t try to set the chrono height in reference to the lens of your scope–as it sits 1″ to 2″ above your bore axis. To avoid muzzle blast interference, set your chronograph at least 10 feet from the end of the muzzle (or the distance recommended by the manufacturer).
Rifles with Elevated Iron Sights
All too often rookie AR15 shooters forget that AR sights are positioned roughly 2.4″ above the bore axis (at the top of the front sight blade). If you set your bullet pass-through point using your AR’s front sight, the bullet will actually be traveling 2.4″ lower as it goes through the chrono. That’s why we recommend bore-sighting and setting the bullet travel point about 5-8″ above the base of the sky-screen support shafts. (Or the vertical distance the chronograph maker otherwise recommends). NOTE: You can make the same mistake on a scoped rifle if the scope is set on very tall rings, so the center of the cross-hairs is much higher than the bore axis line.
TARGET AIM POINT: When doing chrono work, we suggest you shoot at a single aiming point no more than 2″ in diameter (on your target paper). Use that aiming point when aligning your chrono with your rifle’s bore. If you use a 2″ bright orange dot, you should be able to see that through the bore at 100 yards. Using a single 2″ target reduces the chance of a screen hit as you shift points of aim. If you shoot at multiple target dots, place them in a vertical line, and bore sight on the lowest dot. Always set your chron height to set safe clearance for the LOWEST target dot, and then work upwards only.
Other Chronograph Tips from Forum Members:
When using a chronograph, I put a strip of masking tape across the far end of the skyscreens about two-thirds of the way up. This gives me a good aiming or bore-sighting reference that’s well away from the pricey bits. I learned that one the hard way. — German Salazar
A very easy and simple tool to help you set up the chronograph is a simple piece of string! Set your gun (unloaded of course) on the rest and sight your target. Tie one end of the string to the rear scope ring or mount, then pull the string along the barrel to simulate the bullet path. With the string showing the bullet’s path, you can then easily set the chronograph’s placement left/right, and up/down. This will also let you set the chrono’s tilt angle and orientation so the sensors are correctly aligned with the bullet path. — Wayne Shaw
If shooting over a chrono from the prone position off a bipod or similar, beware of the muzzle sinking as recoil causes the front of the rifle to drop. I “killed” my first chronograph shooting off a gravel covered firing point where I’d not given enough clearance to start with and an inch or two drop in the muzzle caused a bullet to clip the housing. — Laurie Holland
Share the post "Range Tip: How to Avoid Blasting Your Chronograph"
Here’s good news for owners of Shooting Chrony Chronographs — you can purchase a Chrony LED Lamp (CLL) upgrade kit that allows your Chrony to work indoors. In addition, the new LED illuminators will enhance outdoor performance in uneven or shaded lighting conditions. The CLL kit costs $87.95 and can be ordered directly from the Shooting Chrony Website, or from vendors such as MidwayUSA.com.
Why the LED Illuminator Kit Is Needed
Shooting Chronys are popular “entry-level” chronographs. They are inexpensive to purchase and they stow compactly with their signature “folding box” design. This Editor used a Shooting Chrony (Beta Master model) for a few years with generally good results. However, I quickly learned that the Shooting Chrony gave the most reliable readings in diffuse mid-morning light with mildly overcast skies (thin cloud layer). The unit did not like to work in the late afternoon with the sun at a low angle. Likewise, uneven, shady conditions caused problems. In summertime, the ultra-bright, noontime summer sun, directly overhead, seemed to “over-power” the diffusers, causing errors. So, I learned to do my speed tests only when conditions were most favorable for the Shooting Chrony. Now, admittedly, not all Shooting Chronys are so temperamental — I’ve seen a few that worked great in bright overhead sunlight. But most Shooting Chronys do seem to struggle with shady conditions or low-angle sunlight.
LED Lamp Kit Components and Accessories
To improve Shooting Chrony reliability in all light conditions, Shooting Chrony offers a $87.95 LED kit (Item #110) that comes with LED-equipped 14″ white diffusers mounted on 16″ wire support rods. The LEDs provide a constant, consistent light source, so you can shoot in the late afternoon and evenings. The kit includes a 120V/220V AC Adapter, output 12VDC @500mA. If AC power is not available, you can run the LED Lamp with an optional 12v dc “Power Station” battery pack (Item #111, $47.95), or you can draw 12v current through an available cigarette lighter-style adapter (Item #112, $10.00).
LED Kit Users Say It Works
We haven’t tested the LED kit ourselves yet, but here’s what one kit buyer had to say:
“If you shot in poor light, you are going to miss velocities no matter what chronograph you are using. You go to all the work of assembling your handloads, set up the chronograph, and then shoot at the target through the detectors… only to get ‘Err 2′ or ‘Err 9′ and use up most or all of the carefully assembled handloads without getting any velocity data. The Chrony LED Lamp assembly has been perfect. Bright sun/no clouds, hazy/cloudy, or shadows/shade makes no difference — all the readings come through without a single ‘Err X’ code. Current draw is also surprisingly low. With the C.L.L. on for five straight hours, the battery pack still shows a full charge.”
Share the post "LED Lamp Kit Improves Shooting Chrony Low-Light Performance"
How to Avoid Shooting your Chrono: There is nothing more frustrating (or embarassing) than sending a live round into your expensive new Chronograph. When setting up a chrono, we always first remove the bolt and bore-sight to ensure that the path of the bullet is not too low. When bore-sighting visually, set up the rifle securely on the sandbags and look through the bore, breech to muzzle, lining up the barrel with your aim point on the target. Then (during an appropriate cease-fire), walk behind the chronograph. Looking straight back through the “V” formed by the sky-screens, you should be able to see light at the end of the barrel if the gun is positioned correctly.
Adjust the height, angle and horizontal position of the chronograph so the bullet will pass through the middle of the “V” below the sky-screens, no less than 5″ above the light sensors. We put tape 5″ up on the front sky-screen supports to make it easy to align the bore to the right height over the light sensors. Make sure the chrono housing is parallel to the path of the bullet. Don’t worry if the unit is not parallel to the ground surface. What you want is the bullet to pass over both front and rear sensors at the same height. Don’t try to set the chrono height in reference to the lens of your scope–as it sits 1″ to 2″ above your bore axis. To avoid muzzle blast interference, set your chronograph at least 10 feet from the end of the muzzle (or the distance recommended by the manufacturer).
IRON SIGHT Rifles: A common mistake, particularly with newbie AR15 shooters, is to use the iron sights when setting the height of the chronograph. All too often, people forget that AR sights are positioned roughly 2.4″ above the bore axis (at the top of the front sight blade). If you set your bullet pass-through point using your AR’s front sight, the bullet will actually be traveling 2.4″ lower as it goes through the chrono. That’s why we recommend bore-sighting and setting the bullet travel point about 5-8″ above the base of the sky-screen support shafts. (Or the vertical distance the chronograph maker otherwise recommends).
TARGET AIM POINT: When doing chrono work, we suggest you shoot at a single aiming point no more than 2″ in diameter (on your target paper). Use that aiming point when aligning your chrono with your rifle’s bore. If you use a 2″ bright orange dot, you should be able to see that through the bore at 100 yards. Using a single 2″ target reduces the chance of a screen hit as you shift points of aim. If you shoot at multiple target dots, place them in a vertical line, and bore sight on the lowest dot. Always set your chron height to set safe clearance for the LOWEST target dot, and then work upwards only.
Share the post "Setting up your Chronograph–Remember It’s a Tool, Not a Target"
Oehler Research, Inc. of Austin, Texas has announced that it has resumed production of the vaunted Oehler Model 35P Proof-Channel™ chronograph with printer. Company President Ken Oehler revealed to AccurateShooter.com that his company will produce “at least a couple hundred” model 35P chronographs in a “special run” this year. Production of the Model 43 remains suspended. The first new Model 35P units should ship “in late summer”. Oehler Research is taking orders right now, but Ken said: “we can’t start shipping until all the components are in inventory — end of July at the earliest.”
The latest Model 35P chronographs will employ exactly the same design and components as previous units — no changed features or parts. The Model 35P design has proven both highly accurate and reliable, and Ken explained that his team will make the new units “just the way they were before”. The new model 35Ps will ship in one configuration only, a complete system costing $575.00 (plus $20 UPS shipping). This includes: printer/base unit; three Skyscreen III detectors; four-foot rail; two folding stands; and a Plano (Doskocil) hard case. All the components fit into the hard case for storage and transport (see photo below):
The resumption of Model 35P production represents an effort to “test the waters”, to see if the company should re-enter the consumer shooting market, according to Ken Oehler. In the last few years, Oehler Research has focused on high-end military and industrial products. But Ken has brought in a new engineer, Gary Stafford, who is overseeing the Model 35P program. If all goes well, according to Ken, there may be other consumer products in the future and Stafford may “take over the reins” from Ken, who, at age 73, may shift to a “Senior Chairman” role in the company.
If you want to purchase a new Oehler Model 35P Chronograph, you should contact Oehler Research right away — Oehler has already logged 20+ orders. Order Online at www.Oehler-research.com. You can also email sales[at]oehler-research.com or phone (800) 531-5125, (512) 327-6900. According to Oehler’s sales sheet, you can reserve your unit with a Visa/MC and Oehler won’t bill until the product ships. Or, if you pre-pay via check or Money Order, Oehler will pay the shipping. Shipments will be prioritized according to the date orders are received.
Share the post "Oehler 35P Chronograph is Back! Oehler Resumes Production."
When setting up a chrono, we always unload the rifle, remove the bolt and bore-sight to ensure that the path of the bullet is not too low. When bore-sighting visually, set up the rifle securely on the sandbags and look through the bore, breech to muzzle, lining up the barrel with your aim point on the target. Then (during an appropriate cease-fire), walk behind the chronograph. Looking straight back through the “V” formed by the sky-screens, you should be able to see light at the end of the barrel if the gun is positioned correctly. You can also use an in-chamber, laser bore-sighter to confirm the visual boresighting (see photo).
