The 2023 NRA F-Class National Championships are underway right now at the Ben Avery Range outside Phoenix, Arizona. There are two divisions: F-Open and F-TR. The F-Class Championships have two segments, Mid-Range and Long Range. The Mid-Range Championships ran from October 29 through November 1st, while the Long Range Championships commenced on November 2, and conclude on Sunday, November 5. See details of the 2023 F-Class Championships, including the course of fire, on the Desert Sharpshooters 2023 F-Class Nationals Program page.
For this Saturday Video Showcase, we feature five F-Class videos. These segments cover F-Class equipment, reloading, load testing, marksmanship, wind-reading and competition.
F-Class Competition — On the Firing Line at 2020 Nationals
This 12-minute video by F-Open ace Erik Cortina shows the action at the 2020 F-Class Nationals held at the Ben Avery Range outside Phoenix. Erik, who shoots with F-0pen Team Lapua, explains how team competition differs from the individual matches. Wind calls are made by the team’s wind coach. The shooter focuses on the trigger pulling.
Reloading for F-Class — Tools and Techniques
In this video, Erik Cortina, the 2023 SW Nationals F-Open Champion, and member of Team Lapua, provides a break down of the process he goes through to reload his match ammo for competition. Eric covers all phases of reloading: bullet sorting, case prep, priming, powder measuring, and bullet seating.
Load Development Procedures for F-Class — Seating Depth
In this video, 2023 NRA Mid-Range National Champion John Masek (aka “F-Class John”) explains how he does load development in an efficient and reliable manner. He specifically focuses on testing for optimal seating depth. With 229,000 views, this is the most-watched video on F-Class John’s popular YouTube channel. Viewers have praised this video: “This was a great video, really appreciate the explanation about how you bracketed the jump and why you chose the closest.”
F-Class Competition at Bisley Range in the UK
Every wondered what F-Class competition is like in England? There are different staging rules and different targets with “V” for a center hit vs. “X” at USA F-Class matches. This video covers the 2015 F-Class Championship held at the famed Bisley Range in England, UK. To learn more about F-Class in the UK, For more on F-Class, visit NRA.org.uk.
Wind-Reading for Long-Range Competition
In this excellent video Keith Glasscock explains how to read the wind and even predict wind changes in cycling conditions. Keith notes that you should look at environmental features and mirage, not just wind flags. Keith is one of America’s best wind gurus — he was a team wind coach and he has finished second three times in F-Open division at the F-Class National Championships.
Here is the sleek, carbon-stocked .308 Win rifle Bryan Litz used to win both the 2015 Mid-Range AND
Long-Range F-TR Championship at the Ben Avery Range in Phoenix, Arizona.
Share the post "Saturday at the Movies: F-Class Showcase for Nationals Week"
Forum member F-Class John is an avid F-Class competitor and expert handloader. This week he won the NRA F-0pen Mid-Range National Championship. John reviews reloading hardware and shooting-related products for his popular F-Class John YouTube Channel, which now boasts 540+ videos. John also does product testing for AccurateShooter.com and his new FClassJohn.com website. On his YouTube channel, John has reviewed many of the latest and greatest reloading tools and accessories. Below are three interesting F-Class John tool and reloading product reviews.
If you like these informative videos, consider joining F-Class John’s Patreon Channel for live video meetings, more in-depth videos, and detailed explanations.
Here are three of John’s most interesting gear review videos for products that can benefit all serious handloaders.
21st Century Hydro Press and Standard Arbor Press
John notes: “You can’t really talk about precision reloading without taking about inline dies and arbor presses. For my money there’s nothing better than the lineup from 21st Century Shooting. They offer the Hydro Seater which is hands-down the best manual seater out there as well as their standard arbor press which is great for taking on the road to push back bullets as needed.”
Henderson and Giraud Power Trimmer Comparison Review
In this video John reviews two high-quality powered case trimmers that help handloaders rapidly process large volumes of brass. He says these are “arguably the two best trimmers on the market” and are “both worth the money if you do a lot of trimmming”. The Giraud Power Trimmer is rugged and popular with high-power shooters. The advanced, red Henderson Precision Gen 3 Trimmer offers some advantages for precision trimming and John likes the Henderson layout and ergonomics.
Concentricity Checking with Accuracy One Gauge
Every serious hand-loader needs a quality concentricity gauge. The Accuracy One Concentricity Gauge boasts a smart design that delivers precise, repeatable results. We like the unit’s easy adjustability and its ability to work in a variety of configurations. The Accuracy One Gauge measures internal and external neck runout of cartridge cases as well as seated bullet runout. It can also measure the runout of the ogive, bearing surface, and boat-tail of individual bullets. And it can even measure your primer pocket runout.
Share the post "Reloading Tool Reviews By Mid-Range Nat’l Champ F-Class John"
We congratulate John Masek (F-Open) and Keith Trapp (F-TR), the 2023 NRA F-Class Mid-Range National Champions. The Mid-Range Nationals were held at the Ben Avery Range outside Phoenix, Arizona, and the F-Class Long Range Nationals continue November 2 through November 5, 2023. Keith’s 2023 Mid-Range title was his second big win in a row — Keith won the Long-Range F-TR Championship in 2022.
2023 F-Class Mid-Range National Champions Keith Trapp (L) and John Masek (R).
We were particularly pleased to see our colleague John Masek earn this major victory. John helps AccurateShooter.com with product tests/reviews, and John works on our Deals of the Week features. John also has a popular F-Class John YouTube Channel with videos we frequently feature. And you can see John’s content on his new website FClassJohn.com. CLICK HERE to access John’s videos and product tests.
John Masek Wins His First Nationals
John finished with a very impressive 1774-95X score, followed by Jason Simes (1772-84X) and Norm Harrold (1768-99X). John shot very well in difficult, windy conditions, finishing with not just the highest Grand Aggregate score, but the second highest X-Count (after Norm Harrold). This is a big win for John, his first-ever National title. No one has worked harder to raise his game through advanced reloading processes and lots of practice both with centerfire and rimfire rifles.
Forum member and fellow F-Class competitor David Joe praised John’s performance: “Hey John, great wind calling this week, congratulations! Who needs Long-Range with wind like that. What a close and hard won contest! Great scores today!”
In the F-TR Division, Keith Trapp took top honors with a 1776-87X score, followed by Tracy Hogg (1767-70X), and James Crofts (1762-67X). Keith, a proven F-TR superstar, also won the F-TR 1000-yard Nationals at Ben Avery in 2022.
Here’s an insightful interview with John Masek and fellow F-Open ace and YouTube host Erik Cortina:
And here is a video F-Class John produced at last year’s Long-Range (1000-yard) F-Class Championship. This was also held at the Ben Avery Range in Arizona.
Destiny Fulfilled: Before John left his Oregon home for the 2023 F-Class Nationals, this Editor spoke to John on the telephone. I said “Good luck John, I think you’re due to stand on the podium and hold a trophy.” That prediction proved prophetic. We are glad to see our friend and colleague John Masek now hold the title of NRA F-Class Open Mid-Range National Champion!
Shown above is John’s 7 PRCW F-Open Rifle. This features a Borden BRMXD action, X-Ring stock, and Flavio Fare trigger. On top is the 8-80x56mm March Majesta scope, a very advanced new optic. The rifle is chambered for the 7mm PRCW cartridge. John loads with Lapua brass, Vihtavuori N555 powder, and Berger 180gr Hybrid bullets.
Share the post "John Masek and Keith Trapp Win F-Class Mid-Range Nationals"
L.E. Wilson Case Gage Depth Micrometer Tool Hands-On Tool Review by F-Class John
Are you looking for a better way to measure shoulder bump when sizing brass? When it comes to measuring your shoulder bump there has traditionally been just one way to do it and that’s with a set of calipers and some type of tool attached to a calipers jaw which contacts the case shoulder. While this method has worked well for decades there’s always been some inherent lack of consistency and repeatability. While a minor issue, the inability to get the exact number in completely dependent on the user’s pressure applied and the angle at which the jaws push on the brass.
Enter the L.E. Wilson Case Gage Depth Micrometer with its simple but effective use of Wilson case gauges to ensure a perfect measure of shoulder bump every time. The unit comes with the micrometer top as well as a check gauge which allows you to easily calibrate the micrometer whenever needed. On top of the micrometer unit, you’ll also need to purchase the appropriate case gauges for each of your cartridge types and then you’re ready to go. No other measuring instruments are needed (yep, no calipers are required).
Using the Wilson Depth Micrometer (perhaps a better name is Shoulder Bump Micrometer) is a straightforward process. Simply take your fired brass and insert it into the case gauge and place the micrometer top onto the primer side of the gauge. While holding the micrometer top firmly against the case gauge in one hand, slowly turn the micrometer until you feel it stop. You can back off and turn it again to verify the stop point and once you have it, look at the measurement on the micrometer. Now insert a sized piece of brass and repeat the procedure. Take note of the new number and subtract it from the fired brass number and you now have an exact amount of shoulder bump. Continue to adjust your sizing die until you have the correct amount of shoulder bump and you’re ready to size all your brass.
Watch Video to See how Shoulder-Bump Measuring Micrometer Tool Works
Guys, in this case a VIDEO is worth more than a thousand words. It may not be obvious from the photos how this system works. In fact, it is fast and easy. Drop brass into cartridge-specific case gauge, then put the Micrometer unit on top, and dial to touch. The video shows how this works.
SUMMARY — Tool is Fast, Precise, Repeatable, and Easy to Use — We Like It
The beauty of this tool is the simplicity with which it works. It uses a very accurate micrometer to simply measure how much further your brass is sitting forward inside the case gauge. After a couple uses, you’ll find that this tool is fast, accurate and incredibly repeatable. That gives you confidence that your brass is being sized properly. Ultimately, I found that using the micrometer top really became a joy as I set up a new set of dies and as I sized my brass, I could easily check the consistency as brass came off my press. If you’re looking to improve your sizing game, give the L.E. Wilson Case Gage Depth Micrometer a try. MSRP is $130.00.
Share the post "L.E. Wilson Case Gage Depth Micrometer Review"
Product Review by F-Class John
Case preparation is critical for precision reloading. One must trim cases, debur/chamfer case mouths, clean necks, spruce up primer pockets and do other important tasks. Complete case prep can involve many separate processes, each requiring its own tools. With each of those tools comes additional cost as well as the need for more storage and bench space. To make case prep easier, faster, and more convenient Lyman created the Case Prep Xpress (#ad). The Case Prep Xpress, introduced a few years back, combines up to five prep stages into one well-built, stable, versatile unit. Watch this video to see the machine in action:
The Case Prep Xpress features five (5) independently-turning spindles all with the common 8/32 thread. This allows you to attach multiple tools supplied with the unit PLUS many other screw-on prep tools. For our testing we started out using a variety of the 12 included tools and found they cover the majority of case prep tasks. Lyman supplies deburr and chamfer tools, pocket uniformers, reamers and cleaners, as well as an assortment of neck brushes.
The deburr and chamfer tools worked really well, creating beautiful bevels all while leaving a nice flat edge across the top of the neck which is critical for accuracy and brass life. We found the primer pocket cleaning tool did a good job, but for truly clean pockets we recommend using the primer pocket uniforming tool, which very efficiently removes even hard residues.
The benefit of having interchangeable heads is that you can add your own accessories. We like to use a bore brush with bronze wool wrapped around it for use inside our necks. This worked perfectly once we screwed it in. In fact, we couldn’t think of any 8/32-threaded accessory that wouldn’t work well on this machine. Another great design feature is how all the accessories are oriented straight up. This allows for perfect visual alignment of your cases onto the tools which is critical — especially when performing cutting operations such as primer pocket uniforming.
Along with the five power stations there are six female-threaded storage spots on the sides where tools can be placed to ensure they don’t get lost. We like this feature since there will be more than five accessories you want to use and having them easily available is a great feature. You can keep 11 tools right on the machine (5 on top, 6 on the sides). That way you don’t have to dig through storage bins.
The Case Prep Xpress has a removable front bin to hold brass shavings, and there are two circular trays on either side of the bin. In front is a long tray that holds the provided brush. This makes it relatively easy to clean off brass shavings and other debris from case prep processes.
SUMMARY — Versatile Case Prep Xpress Is A Good Value
For the money, Lyman’s Case Prep Xpress is tough to beat. It performs multiple tasks well while being stable and easy-to-use. Yes there are some multi-spindle prep centers that offer variable or fast/slow RPM spindles while the Lyman’s spindles are all fixed RPM. (See, e.g. the RCBS Brass Boss). However those other systems don’t include all the convenient on-board storage of the Case Prep Xpress, and are typically more expensive. The Lyman Case Prep Xpress sells for about $170-$190 “street price”. It’s currently on sale for $179.99 on Amazon (#ad). This makes the Lyman Case Prep Xpress a fine value — it offers great versatility while saving space and saving money compared to buying five or more separate, powered tools.
As an Amazon affiliate, this site can earn revenues through sales commissions.
Share the post "Multi-Function Lyman Case Prep Xpress Review and Video"
Forum member F-Class John is an avid F-Class competitor and expert handloader. John reviews reloading hardware and shooting-related products for his popular F-Class John YouTube Channel, which now boasts 500+ videos. John also does important product testing for AccurateShooter.com. Through his YouTube channel, John has reviewed many of the latest and greatest reloading tools and accessories. For today’s Video Showcase, we selected six F-Class John product reviews. Products tested include front rests, borescopes, precision triggers, ammo caddies, steel rimfire targets, and a concentricity checker.
If you like these informative videos, consider joining F-Class John’s Patreon Channel for live video meetings, more in-depth videos, and detailed explanations. Join Patreon via Patreon.com/fclassjohn for full length videos, live chats, and more.
SEB NEO-X and Rodzilla Raptor Front Rests
This video covers two outstanding front joystick rests, the SEB Neo-X and the Rodzilla Raptor. Both of these rests work great for both benchrest and F-Class shooters, centerfire and rimfire. Build quality is outstanding for both rests. Tester F-Class John observes: “Both are great units and user preference will really dictate which to get. I own both and find they give me consistent target acquisition.” To learn more about these two excellent front rests, visit TheRodzilla.com and/or SEB Rests USA.
Testing Flavio Fare Triggers
The Flavio Fare triggers are some of the best on the market. These are offered for various action types including Remington clones and custom actions. CLICK HERE for a discussion of these triggers on our Forum. The Flavio Fare Veloce Hunting Trigger (with safety) adjusts from 5 to 25 ounces pull weight and retails for $439.95. The Flavio Fare Whisper 2.1 BenchRest Trigger (no safety) adjusts from 0.7 to 2.8 ounces, and costs $419.95. Reviewer F-Class John says these Flavio Fare triggers are “smooth, crisp, with a wide range of trigger pull weights … I love these things.”
Steel Targets for Rimfire Competition — Options Reviewed
NRL-22 and PRS Rimfire matches are growing in popularity. These types of competition are fun because reactive targets are used at the matches. Such targets provide “instant gratification” for a good shot — you hear a “ping” and may see the target swing or rotate. This video reviews a large variety of rimfire steel targets from D-M Targets. F-Class John notes: “These D-M Targets rimfire metal targets set-up quickly and easily. These targets are made from good steel and produce a good sound when hit.” John also observed that these DM steel rimfire targets don’t hang up when hit.
Teslong BoreScope Comparison — NTG500H and NTG450H Models
All serious rifle shooters should have a good digital borescope that allows you to view the inside of your rifle barrels. That helps you diagnose fouling/wear issues and evaluate the effectiveness of your cleaning procedures. Teslong makes some of the most popular electronic borescope systems. There are versions that can connect to your smartphone, iPad, or mobile device. We like the Teslong units that have their own dedicated hard-case display unit. This ensures you don’t have to fiddle with smartphone software updates or security conflicts. In this video, F-Class John reviews two different Teslong Borescope systems: model NTG500H and model NTG450H. Both these units have their own control cases with glass display screens. John notes: “Both units are priced right, have great screens, and are easy to use.”
Ammunition Caddies for F-Class and Benchrest Competition
If you shoot at a quick pace during benchrest, varmint, or F-Class competition, you can definitely benefit by having a well-designed ammo caddie that puts your round within easy reach. This video reviews loaded ammo holders produced by Accurate Forum member BGInvestor using a 3-D printer. The video showcases two different versions, one dark blue for benchrest, and a second, larger black unit for F-Class which is shown above. This video review shows different ways to mount these ammo holders, and discusses the multiple block sizes which are offered. F-Class John says you’ll want to pick a caddie that suits your shooting style and particular discipline.
Concentricity Checking with Accuracy One Gauge
Every serious hand-loader needs a quality concentricity gauge. The Accuracy One Concentricity Gauge boasts a smart design that delivers precise, repeatable results. We like the unit’s easy adjustability and its ability to work in a variety of configurations. The Accuracy One Gauge measures internal and external neck runout of cartridge cases as well as seated bullet runout. It can also measure the runout of the ogive, bearing surface, and boat-tail of individual bullets. And it can even measure your primer pocket runout. Reviewer F-Class John notes: “I think this is the best concentricity tool on the market. Such a tool is a necessity for new loaders or those who are always setting up new dies.”
Share the post "Saturday Movies: Reviews by F-Class John of Great Products"
Summer Solstice is just four days away. That means shooters nationwide will soon be dealing with peak summer ambient temperatures. When it’s hot outside your barrels will heat up even faster during use — and that’s not good for barrel longevity or consistency during long strings of fire. If you want a barrel to have maximum useful life you need to keep it from getting very hot. That’s why you should have a barrel cooler. There are many variations, but the most popular models blow cooling air through the bore. This can reduce barrel temps significantly in a relatively short period of time.
For this Saturday Movies feature, we’ve found 7 videos that review commercial barrel coolers or show how to build your own cooler with a hose, small electric fan, and modified case. There are a variety of barrel coolers on the market currently. Three of the most popular coolers are the yellow BarrelCool, $39.99 at MidwayUSA, the red Magnetospeed RifleKuhl, $56.89 on Amazon ($59.99 MSRP), and the black/yellow Chamber Chiller BA PRO, $80.40 on Amazon.
Barrel Coolers — Why You Should Use Them
This video explains why it’s vitally important to keep your barrel cool, particularly when running a suppressor. The host, a long-range shooting instructor, explains: “The best way to extend your barrel life [is using] barrel coolers. We have learned through decades of shooting that keeping the barrel cool and cooling it as fast as possible between relays and strings of fire will return meaningful results in the longevity of your rifle barrel. If you shoot suppressed like we do, this brings the level of importance up to a whole new level. Keeping it cool will keep it running at its best longer than you ever thought possible.” The barrel cooler featured in this video is $65.00 on the Wolf Precision website.
Barrel Cooler Comparison Tests — Four Options
Barrel coolers are vital accessories that let you get more shots downrange with less time waiting. In this excellent, comparison test video LongRangeOnly’s Ryan Furman shows which barrel coolers will remove the most heat with the rate of air flow comparison. Ryan also covers some basic differences and attributes of each unit tested and tests the units with temp gauges. Units tested are the BarrelCool, Magnetospeed RifleKuhl, the blue-bodied Original Barrel Cooler (6:48 time-mark), and a large Coleman rechargeable Quick-Pump (8:12 time-mark). The latter two units provided the most airflow when fitted with an appropriate hose.
Build Your Own Barrel Cooler — New and Improved
Popular YouTube host F-Class John was one of the pioneers in building very affordable, yet very effective do-it-yourself barrel coolers. John initially used a hose fitted to a battery-powered black Rechargeable Mini Air Pump. John then tapered a hose to fit a cartridge case for a perfect fit in the chamber. The case-head was cut off to better fit the hose for maximum airflow.
F-Class John later created an upgraded barrel cooling system using smaller, more compact pumps. He would charge these with a high-capacity battery pack (see above) and a USB charging cord. As shown in the video above, this Gen 2 system proved to be very effective. John notes: “Make sure you watch how long you the pump runs and don’t let it overheat”. One of these USB-port Mini Air Pumps is currently available on Amazon for $29.98, and there are similar compact pumps for a bit less.
Chamber Chiller BA Pro vs. Magnetospeed RifleKuhl
This video compares two compact barrel coolers, the red Magnetospeed RifleKuhl, $56.89 on Amazon and the yellow Chamber Chiller BA PRO, $80.40 on Amazon. Hear the tester’s conclusions starting at the 2:40 time-mark. The tester reports that both the RifleKuhl and the Chamber Chiller fit well in the chambers. The two units cooled down barrels pretty much identically in the field. Measured with a Kestrel, the RifleKuhl had a 12 mph flow vs. 11 mph flow for the Chamber Chiller (3:03 time-mark). The deciding factors for the tester (1:32 time-mark) were the superior battery life of the Chamber Chiller (with an extra USB battery attached) and the quietness of the Chamber Chiller.
Riflekühl Barrel Cooler by MagnetoSpeed
The MagnetoSpeed Riflekühl barrel cooler is designed to get barrel temperatures down to intended operating levels quickly. The turbocharger-inspired impeller is engineered to produce great airflow in a small package. Powered by a single CR123A Lithium battery (included), ambient air is forced through the extendable nozzle down the bore of the rifle. This is pretty efficient and can typically cool a barrel in under 8 minutes. The Riflekühl doubles as a chamber flag and features an exclusive built-in air filter to prevent dust and dirt from being blown into your rifle.
DIY Barrel Cooler Made with Mattress Inflator and Hose
An average gun-owner can build a good barrel cooler relatively easily with low-cost components. In this GunMart.TV video from the UK, the host showcases a very effective barrel cooler he crafted with an electric mattress inflator and a hose. The unit has good flow and can cool a barrel in a couple of minutes (3:10 time-mark). These components can be purchased for under $30.00. The tester purchased his cooler fan for $14.99 on Amazon (3:40 time-mark).
Thanks to Boyd Allen for help finding these videos.
Share the post "Saturday at the Movies — Barrel Coolers in Review"
Anschutz .22 LR rifle set up for F-Class competition. Photo courtesy Sportschieben Blog.
Here’s a fun new discipline that will grow in years ahead — Smallbore F-Class with .22 LR rimfire rifles. Rest-supported prone rimfire matches have been held around the world for quite some time, but only a few years ago was the discipline officially codified in the NRA Smallbore Rulebook. And the first-ever Smallbore F-Class National Championship was held in July 2018 in conjunction with the Smallbore Nationals at Camp Wa-Ke’-De in Bristol, Indiana. The Nationals involved multiple days of prone shooting at 50 meters and 100 yards. For more information read Hap Rocketto’s Shooting Sports USA Smallbore F-Class Report.
Smallbore F-Class competitors may shoot F-TR style with a bipod, or use a front rest. In the above photo from the inaugural NRA National Championship you can see a shooter with SEB Coaxial Rest at top, with a competitor using a low-profile bipod at bottom. Note the extended handle used to adjust bipod elevation. This is not a coaxial joystick, but rather a long handle attached to the mariner wheel.
Smallbore F-Class — The Future Looks Bright
With the high cost of centerfire ammunition, and the limited number of 1000-yard (or even 600-yard) ranges, we can envision that Rimfire F-Class will become a popular event at ranges across the country. Clubs don’t even need benches — just a 100-yard target bay and flat ground for the shooters. You can start with an inexpensive rimfire rig and Harris bipod. Then work up from there. Here is a custom rimfire F-TR style rig that belongs to F-Class ace and past centerfire F-TR National Champion James Crofts.
Rimfire F-Class and Fun Prone Matches with Front Rest or Bipods
Rimfire F-Class offers the fun of centerfire shooting at a much lower cost. Shooting is done prone with either a front rest or a bipod. You can shoot a relatively inexpensive rifle such as a CZ 457 MTR, or a custom build that has the same design features, weight, and ergonomics as a full-size F-TR or F-Open rifle. The choice is yours. We like shooting smallbore F-Class, because you can find decent .22 LR ammo for just $0.20 per round. By contrast, you’ll probably spend at least $1.20 per round for F-Class centerfire ammo (counting bullet, powder, primer, and part of the brass cost).
Top-Tier Vudoo V22-S Target Rifle for Rimfire F-Class
Vudoo Gun Works now offers an impressive .22 LR Single Shot Target Rifle that should prove ideal for rimfire F-Class (Open division). It features the new V22-S single-shot action, McMillan stock, and Flavio Fare BR-VS trigger.
Rimfire F-Class in the Canary Islands
This video comes from the Canary Islands, part of Spain. The voice-over is in Spanish but there are English sub-titles. The host explains: “In this video we summarize the main characteristics of this [shooting sport] that is practiced at 50 meters, 100 meters, and 200 meters with your .22 LR. Learn how to prepare your rimfire carbine and learn how to score your own targets by following our simple explanations. In another video we will delve into shooting techniques, shooting accessories and field accessories.”
Here is another rimfire F-Class video from the Canary Islands. This shows how the sport can be done with a variety of rimfire rifle types, even including a .22 LR AR clone. Some shooters are using a wide-base bipod, others are using normal Harris-type bipods, while others are using a large, benchrest-style front rest.
Rimfire F-Class-Style Local Fun Match in Oregon
In this video, F-Class John shoots an F-Class-style local fun match in Oregon. He is using a .22 LR rimfire rifle that has a full-size stock very similar to his custom F-Open centerfire rifles. This allows him to easily switch from centerfire F-Class to rimfire prone shooting with front rest and rear bag. The local fun match rules are a little different than an official F-Class match, but the shooting skills required are the same. Shooting this kind of local rimfire match allows John to keep his F-Class skills at a high level at a fraction of the cost of shooting centerfire F-Open.
Rimfire F-Class in Russia
NOTE: This video was filmed in Russia. The dialog is in Russian (without English subtitles), but it is still interesting to watch. Shooting F-Class with .22 LR ammo has become popular in Russia and other parts of Europe. You can have fun on a relatively short (200m) range with low-cost ammo.
Smallbore F-Class Course of Fire
The Smallbore F-Class Nationals was completed on paper targets at 50 yards and 100 yards. According to Shooting Sports USA: “The tournament ran during the any sight and metric phases of the 2018 NRA National Smallbore Rifle Championships, featuring a daily course of fire which mirrored the sling shooters, 40 shots at 50 meters on the A-50 target, a Metric Dewar, followed by 40 shots at 100 yards on the A-33 target. Although the international targets were shot throughout, the first two days were titled ‘conventional’ and the last two ‘metric’.”
The specifics of the match such as rifle requirements, rests, and sights may be found in the Provisional Smallbore Rifle F-Class Rules (Section 23), found on page 65 of the current NRA Smallbore Rifle rulebook. Any rules not covered in Section 23 will [reference] the normal rules of Sections 1 through 22.
Share the post "Saturday Movies: Rimfire (Smallbore) F-Class and Fun Matches"
Holiday Greetings to Our Readers
Merry Christmas and Happy Holidays to all our readers and especially our 66,500+ Forum Members. This marks our 18th Christmas “in business”, and the site is stronger than ever thanks to our Gold and Silver Forum members and industry sponsors. AccurateShooter.com is now accessed by over 500,000 visitors every month, who enjoy our Shooters’ Forum, Daily Bulletin, Cartridge Guides, and Feature Articles. Part of the reason for that success is the hard work of our dedicated staff and volunteer helpers.
Unsung Heroes Deserve Recognition
I want to acknowledge those guys who have really helped out the site. Number one is skilled F-Class shooter Praveen K. who serves as our System Admin. Along with being a talented trigger-puller, Praveen is a super-smart computer wizard who has kept our servers running smoothly and helped with vital software upgrades. Praveen has also done some key product tests for the site. We also thank Andy B., our Xenforo ace who has contributed vital Forum software solutions.
A huge “thank-you” goes to F-Class John who finds weekly bargains for the Bulletin and tests new products. John produces gear/hardware reviews for the Daily Bulletin with informative videos showcased on his YouTube Channel. John’s work has become a highlight of our Bulletin content. We also regularly feature videos from wind wizard Keith Glasscock, and product tests from Gavin Gear of UltimateReloader.com. We thank Boyd Allen and EdLongRange who supply story leads for the Daily Bulletin. And we wouldn’t be here without Jeff Williams, who handles site donations by mail. We have a great place to test rifles thanks to our valued friend Joe Friedrich. Other important contributors include: Bryan Litz of Applied Ballistics, Bill Marr of Rifleshooter.com, Jason Baney of EuroOptic.com, and Dennis Santiago. These folks have contributed stories, reviews, and videos. I also want to recognize Hunting Editor Colton Reid and Norway’s Thomas Haugland. All these men (and many others) have aided the site.
Praise for our Site Sponsors and Advertisers
We also want to thank our major sponsors, without whose support the site could not provide the full AccurateShooter.com experience, with an active Forum, an archive of in-depth articles, and fresh content 365 days a year in our Daily Bulletin. We’re grateful to ALL our sponsors and advertisers. In particular, we want to acknowledge the major companies which have been strong supporters of this site for many years: Capstone Precision Group (Berger, Lapua, SK, Vihtavuori), Bruno Shooters Supply, Bullet Central, EuroOptic, Graf & Sons, Midsouth Shooters Supply, Powder Valley Inc., PMA Tools, Precision Reloading, Whidden Gunworks, and Zeiss Sports Optics. Their continuing support helps us keep up the flow of information and serve our readers and Forum members.
The 2022 NRA F-Class National Championships have been underway at the Ben Avery Range in Arizona this past week. The Mid-Range F-Class Nationals ran October 16-19, and the Long Range (1000-yard) event started on October 20 and concludes on Sunday, October 23, 2022. Many of the nation’s leading F-TR and F-Open shooters are battling it out at Ben Avery right now. The week of competition will conclude on Sunday October 23, 2022 with the final 1000-yard relays followed by award ceremonies.
Looking down-range with F-TR rifle at Ben Avery Shooting Facility in Phoenix, Arizona.
F-Class Shooting at Bisley Range in the United Kingdom
F-Class competition is popular around the world, and the UK is a major center of F-Class shooting in Europe. The Bisley range is justly famous, with a long heritage of shooting competitions. This video features the European F-Class Championship held at Bisley in 2015.
Highlights from Day 1 of 2021 F-Class Nationals
In 2021 the NRA F-Class National Championships were held at Camp Atterbury, Indiana. Here is interesting footage from Day 1 of the Long-Range 1000-yard match. The video is narrated by our friend Erik Cortina, a top F-class shooter and member of Team Lapua-Brux-Borden. Erik has a popular YouTube Channel featuring interviews with many top shooters as well as reloading and tech tips.
WICKED WINDS — At Ben Avery with 18-30 mph Winds
Long-range F-Class shooters will tell you that the winds can be the biggest challenge in a match. And things can get pretty wild at times as the Ben Avery range in Phoenix, site of the 2022 NRA F-Class National Championships. In this video, shooters fight through extremely strong 18-30 mph winds at 600 yards. In these kind of extreme conditions, a major unexpected gust can send your bullet off-target.
F-0pen rifle at the Berger SW Nationals at the Ben Avery Shooting Facility in Phoenix, AZ.
Front Rest Options for F-Open (and Benchrest) Competition
If you are shopping for a front rest, definitely watch this comprehensive 42-minute video from start to finish. This is probably the most informative video about premium shooting rests available on YouTube. Top F-Class shooter and video-maker F-Class John covers a wide selection of front rests, with some observations about coaxial bipods as well. John covers the impressive new SEB NEO-X, the easy-to-transport SEB Mini-X, the excellent Rodzilla Rest, the innovative 21st Century Hybrid Rest, the sleek Italian Lenzi Rest. And at the end of the video John reviews the very affordable Caldwell Fire Control Rest ($204.99 on Amazon), explaining how it can be a decent choice for shooters on a limited budget.
Newbie Perspective — First Time Shooting F-Class
Just getting started in F-Class? Then you would appreciate this video, which covers the experience of an F-Class novice from Australia. The host of the video shot his first F-Class match at 600 yards with the Brisbane Mariners Rifle Club (BMRC) in Brisbane, Australia. He was using a Tikka T3 factory rifle with a $40 bipod. He enjoyed the challenge and had a good experience. This video shows that club-level F-Class can be fun, even with a modestly-priced factory rig. NOTE: This video is filmed indoors after the match, NOT on the lovely BMRC range shown above.
Reloading for F-Class — Interview with Erik Cortina
In this Precision Rifle Network video, Erik Cortina of Team Lapua-Brux-Borden covers the reloading process for his F-Class rifle. All phases of reloading are noted — brass prep, annealing, primer seating, precision powder measuring (to the kernel), and bullet seating. Erik also talk about load testing and use of barrel tuners. Erik produces the EC Barrel Tuner which is used by many top competitors.
Building a Modern F-Open Stock for Competition
In this video, our friend F-Class John explains the process for building two custom laminated stocks for his F-Open rifles. John selected handsome, highly-figured African hardwoods, which were then laminated into layers with purple-tinted heart-wood and dark Wenge wood stringers in the middle. The stock-maker then sliced the wood into layers (1:02) and then glued the layers together (1:40). After final cutting, the stocks are shown at 2:00, and then the video shows how the stocks received their final finish. Both stocks are fitted with the R.A.D. recoil-reduction system. See the bedding at 19:00 and the fully finished rifles at 19:12 with barreled actions fitted.
Here is another beautiful F-Open stock, on the firing line at Ben Avery with a SEB Mini front rest. Note the metal side-bars on the front of the forearm. These metal fittings extend the stock’s “wheelbase” while also lowering the rifle’s center of gravity.
BONUS Video
Crazy Small F-Class Group — Five Shots in 1.3″ at 1000 Yards
This video might just make you slap your forehead and say “that’s amazing!” During a practice session, Erik Cortina had a camera set up on the firing line along with a ShotMarker system on the target 1000 yards away. Erik recorded himself nailing a 1.3″ five-shot group, with four of the shots all touching in just 0.3″. The full group size, 1.3″, works out to 0.124 MOA — amazing accuracy for a big 7mm cartridge! And the four touching shots in 0.3″ represent an insane 0.029 MOA cluster! (1 MOA at 1000 yards is 10.47″.) As this was not shot in a competition, Erik’s 1.3″ group doesn’t count as a record, but it just shows how accurate a modern F-Open rifle can be when all the stars align for a talented trigger-puller.
Share the post "Saturday at the Movies: F-Class Showcase — Events, Gear, Loads"
Hydro Press and Arbor Press from 21st Century Shooting
Gear Review by F-Class John
Inline dies, used with arbor presses, continue to dominate the world of precision reloading. While arbor presses have remained mostly unchanged, 21st Century Shooting offers the Hydro Bullet Seating Press, a radical departure from your average arbor press. If you are looking for improved “feel” and feedback on bullet seating pressure, you should definitely check out the Hydro Press. This design has been around for a while now but has remained unchallenged since its inception. The 21st Century Hydro Press still remains a category leader (and the choice of many top competitors) for good reason. It is offered for $300.00 or, with a variety of gauge options, for $367.00. You can add an extended base with loading block another $85.00. CLICK HERE for ordering options.
Arbor presses have traditionally worked by using a gear-driven ram operated with a rotating handle. This allows for a compact design but often lacks the tactile feel and smooth operation that many reloaders want. The 21st Century Hydro Bullet Seater works by using simple mechanical leverage coupled with a hydraulic pressure gauge to seat bullets in a smooth motion all while helping you keep track of seating pressures.
Editor: Many top shooters believe they can seat bullets with greater precision using the 21st Century Hydro Press. I personally get more consistent seating, which seems to improve accuracy and even help a bit with lowering ES. The Hydro Press gives you excellent feedback when seating bullets. That has helped me detect a case with too much neck tension, or a case that may have doughnut issues. When the gauge does something odd or spikes, you are alerted to a possible issue.
In this video, John Perkins of 21st Century Shooting Shows how the Hydro Seater functions.
You might be asking why or how simple a simple mechanical lever gives you an advantage over gear driven systems and the answer is simple, leverage. The Hydro Seater is equipped with a long arm that comes straight up and out from the front and uses a set of hinges that connect to the ram. This elongated arm provides lots of leverage allowing easy force modulation. This smoothly applies pressure to the seating die in one fluid motion. This transfer of power helps seat bullets smoothly in even the tightest of necks without any jerky or stuttering movements.
Working at the same time is a hydraulic pressure gauge using internal oil. I found this gauge was incredibly sensitive, accurate, and repeatable compared to spring-driven gauges. The Hydro gauge read-out really gives the user the chance to sort ammo by seating pressure should they choose. In my particular case I only use it to cull out noticeably high or low ones as “blow off” rounds and am perfectly happy if the rest fall within a given pressure range. The nice thing is that the press allows you to be as picky as you want.
Compact 21st Century Standard Arbor Press
Not to be outdone by its big brother, 21st Century offers a Standard Arbor Press as well, in both right-hand and left-hand versions. Affordably priced at $128.00, this small arbor press in made to the same exacting standards as the Hydro Seater and has some nice features of its own compared to other small arbors.
The large, knurled adjustment knob is one of my favorite features. It tightens securely, yet it allows for easy raising or lowering of the head unit without the need for hex wrenches. 21st Century’s basic arbor press also has a slightly canted lever arm which allows the user to apply pressure more easily and consistently compared to some other arbor presses. While this press is small enough to fit many range bags, it can be disassembled quickly with a single Allen wrench.
While I own the 21st Century Hydro Press for use at home, the Standard Arbor Press goes with me to out-of-town events, so I can adjust bullet seating depth at the match. I love using it for this purpose since the little press is so easy to transport, and then set up and use on the road. The seating action is smooth, and there is plenty of leverage.
Seating my bullets long before I travel gives me the ability to set them to adjust for any throat erosion that may occur. This also ensures my bullets are seated correctly, by eliminating any potential bullet weld or problems from the bullets accidentally bouncing in your luggage. I like the confidence of knowing that my bullets are properly seated before a big match, especially when it has been days or weeks since I loaded them.
New Generation Arbor Press from 21st Century
UPDATE: In addition to the Standard Arbor Press, 21st Century now offers a New Generation Arbor Press for $185. This features direct leverage action plus a light-weight return spring that provides enhanced “resistive feedback” when seating bullets. This Editor has used this New Generation Arbor Press and it does have improved seating “feel”. An extended base with loading block is available at extra cost.
21st Century explains: “Our New Generation Arbor Press is the perfect upgrade for shooters looking to get the most out of their hand dies. With many truly unique features… this press features a butter-smooth direct leverage action. The tight tolerances of this design and exclusion of friction-inducing gears ensures that the press exerts consistent pressure through its full range of motion with minimal effort. Leverage is increased through the incorporation of an extra-long press handle, reducing hand and arm fatigue. The return springs are strong enough to reset the press but do not diminish the operator’s ability to feel the resistive feedback generated by neck tension. Press head clearance is adjustable up to 9 inches.”
SUMMARY — 21st Century Makes Great Bullet Seating Presses
Whether you need a premium bullet-seating Press such as the Hydro Bullet Seater or a basic, easy-to-transport Arbor Press, 21st Century Shooting has a excellent option for you. The Hydro Press offers outstanding bullet seating “feel” and consistency, with an ultra-smooth operation. The basic Arbor Press is well-made, compact, and also yields excellent results. Both these presses are built for a lifetime of use, using high-quality materials.
Share the post "21st Century Arbor Presses: Hydro, Standard, New Generation"
Product Review by F-Class John
Case preparation is critical for precision reloading. One must trim cases, debur/chamfer case mouths, clean necks, spruce up primer pockets and do other important tasks. Complete case prep can involve many separate processes, each requiring its own tools. With each of those tools comes additional cost as well as the need for more storage and bench space. To make case prep easier, faster, and more convenient Lyman created the Case Prep Xpress. The Case Prep Xpress, introduced a few years back, combines up to five prep stages into one well-built, stable, versatile unit. Watch this video to see the machine in action:
The Case Prep Xpress features five (5) independently-turning spindles all with the common 8/32 thread. This allows you to attach multiple tools supplied with the unit PLUS many other screw-on prep tools. For our testing we started out using a variety of the 12 included tools and found they cover the majority of case prep tasks. Lyman supplies deburr and chamfer tools, pocket uniformers, reamers and cleaners, as well as an assortment of neck brushes.
The deburr and chamfer tools worked really well, creating beautiful bevels all while leaving a nice flat edge across the top of the neck which is critical for accuracy and brass life. We found the primer pocket cleaning tool did a good job, but for truly clean pockets we recommend using the primer pocket uniforming tool, which very efficiently removes even hard residues.
The benefit of having interchangeable heads is that you can add your own accessories. We like to use a bore brush with bronze wool wrapped around it for use inside our necks. This worked perfectly once we screwed it in. In fact, we couldn’t think of any 8/32-threaded accessory that wouldn’t work well on this machine. Another great design feature is how all the accessories are oriented straight up. This allows for perfect visual alignment of your cases onto the tools which is critical — especially when performing cutting operations such as primer pocket uniforming.
Along with the five power stations there are six female-threaded storage spots on the sides where tools can be placed to ensure they don’t get lost. We like this feature since there will be more than five accessories you want to use and having them easily available is a great feature. You can keep 11 tools right on the machine (5 on top, 6 on the sides). That way you don’t have to dig through storage bins.
The Case Prep Xpress has a removable front bin to hold brass shavings, and there are two circular trays on either side of the bin. In front is a long tray that holds the provided brush. This makes it relatively easy to clean off brass shavings and other debris from case prep processes.
SUMMARY — Versatile Case Prep Xpress Is A Good Value
For the money, Lyman’s Case Prep Xpress is tough to beat. It performs multiple tasks well while being stable and easy-to-use. Yes there are some multi-spindle prep centers that offer variable or fast/slow RPM spindles while the Lyman’s spindles are all fixed RPM. (See, e.g. the RCBS Brass Boss). However those other systems don’t include all the convenient on-board storage of the Case Prep Xpress, and are more expensive. The Lyman Case Prep Xpress sells for $150-$170 “street price”. It’s currently on sale for $146.99 on Amazon. This makes the Lyman Case Prep Xpress a fine value — it offers great versatility while saving space and saving money compared to buying five or more separate, powered tools.
Share the post "Lyman Case Prep Xpress — Versatile Unit with Five Tool Heads"
Forum member F-Class John is an avid F-Class competitor and expert handloader. This week he won the NRA F-0pen Mid-Range National Championship. John reviews reloading hardware and shooting-related products for his popular 
Holiday Greetings to Our Readers
Just getting started in F-Class? Then you would appreciate this video, which covers the experience of an F-Class novice from Australia. The host of the video shot his first F-Class match at 600 yards with the 
