|
|
December 19th, 2011
Following on the success of its 2011 Rebate Program (which expires at the end of December, 2011), RCBS is launching a new GET GREEN Promotion for 2012. This offers cash rebates to buyers of RCBS reloading products. Additional “bonus bucks” are offered if you buy components from RCBS’s sister companies: Federal, Alliant, CCI, Speer. Here’s how it works. If you buy $50.00 worth of RCBS reloading gear, you get $10.00 cash back. Then you can get an extra $5.00 rebate if you buy one of the following: a pound of Alliant Powder, a box of Speer Bullets, a box of Federal Premium Brass, OR five 100-ct sleeves of Federal or CCI primers. Likewise, if you buy $300.00 worth of RCBS products you can get a $50.00 rebate with an additional $25.00 in bonus bucks if you buy FIVE qualifying items from Alliant, CCI, and/or Federal.
The new GET GREEN Promotion starts January 1, 2012. Purchases must be made before December 31, 2012 and rebate coupon (with proof of purchase) must be received by January 31, 2013. To qualify, you must submit a rebate coupon PLUS box UPCs and original cash register receipts. Offer good in U.S. and Canada only. Please allow 6-8 weeks for delivery. Redemption limited to one of each offer per household. For more information, call RCBS at 866-269-5194, or write to: RCBS PROMOTION, Dept. 7634, PO Box 5011, Stacy, MN 55078-5011.
Share the post "RCBS Launches GET GREEN Cash-Back Promo on Jan. 1, 2012"
September 11th, 2011
Federal Ammunition has released a new type of small rifle match primer optimized for AR15s and similar semi-automatic rifles. The new Gold Medal® AR Match Primers, designated GM205MAR, have harder primer cups than the popular Federal 205M match primers. The harder cup is designed to perform better in semi-automatic actions that use free-floating firing pins. A Federal spokesman said that Federal’s “normal” 205M primers were not ideal for use in firearms, such as ARs, with free floating firing pins. Hence Federal designed the new GM205MAR primers. These are available now from major vendors such as Midsouth Shooters Supply, which offers the new GM205MAR primers for $35.22 per thousand.
Other AR-Friendly Primers
For quite some time, CCI has offered its #41 milspec small rifle primer for use in ARs. A CCI #41 primer is a ‘magnum’ strength primer, equivalent to the CCI 450 Small Magnum rifle primer. However, the #41 primer is made with a bigger gap between the tip of the anvil and the bottom of the cup, creating a slightly less sensitive primer. The #41 primer also has a thicker bottom on the cup than the CCI 400 primer.
Share the post "New Federal Gold Medal Match Primers for ARs"
June 24th, 2011
Bruno Shooters Supply is selling Federal 205M Small Rifle Match primers for just $27.95 per 1000-ct box. That’s a very attractive price — just a couple years ago, these primers were very hard to find, and were selling for nearly fifty bucks per box. Now Bruno’s has 205Ms available for immediate delivery at prices that are $10.00 – $12.00 per box cheaper than some other major vendors. If you prefer the 205Ms for your .223 Rems, PPCs, BRs and 6.5×47 Lapuas, here’s a chance to grab a good supply without breaking the bank. Note, however, that the $27.95/box price does NOT include shipping and hazmat fee. To order these primers, call Amy Bruno at 1-800-455-0350, or (623) 587-7641, or log on to www.Brunoshooters.com.
Story tip by EdLongrange. We welcome submissions from our readers.
Share the post "Federal 205M (Match) Small Rifle Primers at Bruno’s — $28/K"
April 17th, 2011
 Experienced .308 shooters know that the 168gr Federal Gold Medal match ammunition often performs superbly in both factory and custom .308 Win rifles. We’ve seen this stuff shoot 1 MOA in an FN-FAL and close to half-MOA in a GAP tactical rifle. We won’t make any promises, but the reputation of this ammo speaks for itself. Right now, Champion Shooters Supply has Federal GM308M 168gr factory ammo for just $20.00 per box of 20 rounds. That’s 56% off Champion’s regular price, and way below what this ammo normally costs. Loaded with the 168gr Sierra MK BTHP bullet, this stuff is very high grade ammo at a very attractive price. NOTE: If you want it, order soon. Champion states: “Sale Supply is limited, once we run out we cannot continue this special price.”
Story sourced by Edlongrange.
Share the post "Great Deal on Federal Gold Medal Match .308 — $20.00 per Box"
February 11th, 2011
Pistol shooters take heed. Federal Cartridge Company has issued a recall on 45 Auto (.45 ACP) ammo, stating: “Certain lots of recently manufactured 45 Auto ammunition may contain an incorrect propellant charge. Use of product from these lots may result in firearm damage and possible serious injury.” CLICK HERE for 45 Auto (.45 ACP) Warning Flyer.
THIS WARNING APPLIES ONLY TO THE LOTS LISTED ABOVE.
If you possess ammunition from any of these lots, or have questions concerning this warning, please contact us at 1-800-831-0850 or 1-800-322-2342 and ask for Product Service. Federal will provide replacement product and will cover the cost of returning the affected product. Return recalled 45 Auto (.45 ACP) ammo to:
FEDERAL CARTRIDGE COMPANY
900 Bob Ehlen Drive
Anoka, MN 55303
Toll Free Phone: 1-800-322-2342
Story Sourced by Edlongrange.
Share the post "Federal and American Eagle 45 Auto (.45 ACP) Ammo Recall"
November 20th, 2010
 Bruno Shooters Supply has just received a big shipment of 205 and 210 standard Federal Primers. Both the 205s and the 210s are now sale-priced at $24.95 per 1000 (that’s a good price). Large quantities are available.
The Federal 205 (small rifle std) and 210 (large rifle std) primers are still sold out at many other vendors. So, if you need Fed Primers, here’s your opportunity. Other Federal, CCI, Winchester and Remington primers are available — please call Bruno’s at (623) 587-7641.
Share the post "Federal 205 and 210 Std Primers at Bruno’s"
September 30th, 2010
A while back, Forum member Andy (aka GrayMist) did an interesting test, with five (5) different types of .243 Winchester Brass. He collected Federal, Lapua, Remington, and two different lots of Winchester-brand brass. Then he selected ten (10) cases at random from each brand and measured their weights. To ascertain case capacity, three (3) cases from each brand/lot that were closest to the average weight for that brand/lot were selected. The results were surprising: there was less than one (1) grain capacity difference between all the cases, even with a 14.7 grain maximum difference in case weight!
Measuring Procedures
The cases were sized in a Redding body die then primed with a spent primer. All were weighed before and after filling them with distilled water. The capacity shown is an average of all three (3) cases from that lot and represents grains of water. Note, I tested two lots of Winchester brass. Lot A was purchased in 1999. Lot B was from factory .243 ammo. There is a rather large disparity in case weight between the two lots.
| Brand |
Federal |
Lapua |
Remington |
Winchester A |
Winchester B |
| Capacity |
53.9 |
54.4 |
53.7 |
54.8 |
54.8 |
| Aver. Weight |
173.28 |
173.13 |
165.34 |
158.58 |
166.44 |
| SD¹ |
0.46 |
0.39 |
0.17 |
0.58 |
0.42 |
| Range² |
1.70 |
1.10 |
0.40 |
1.80 |
1.40 |
| % of Avg.³ |
0.98% |
0.64% |
0.24% |
1.14% |
0.84% |
1) Standard Deviation in grains.
2) Range is the difference in weight between the heaviest and lightest cases in the test.
3) Case range weight divided by the average weight.
 What the Numbers Mean
… And Some Speculations
Andy observes: “It certainly seems there is a huge difference in case weight between Winchester lot A and any other brand of 243 tested. What is also surprising is that there was less than one (1) grain capacity difference between all the cases, even with a 14.7 grain difference in case weight!
Should one be wary of trying the same loads that were initially tested in the light weight Winchester brass even though the capacity difference is small? I have had some interesting results with one brand brass that I cannot pass on yet, except to say I sent that company a sample of the lot I have been using. The Remington brass weight range was very low. These were taken from a box of once-fired factory ammo. I will have to acquire some more and measure it.”
Results of Larger Lapua Sample
In a previous session Andy weighed all 100 Lapua cases he had on hand. His measurements showed a total variation of 2.1 grains, with the weight range being 172.5 to 174.6 grains. That is a 1.2 percent spread. The most that came in at the same weight were 11 cases at 173.5 grains.
Share the post ".243 Win Brass Comparison Test — Surprising Results"
June 17th, 2010
Hand-loaders know how to assemble bullet, brass, powder and primer into a loaded cartridge. But have you ever wondered how brass cartridge cases are formed, or how bullets are made, starting with raw materials? Federal Ammunition (a division of ATK) has created an interesting video that shows how factory-loaded ammo is created, from start to finish. The video shows how cartridge brass is cupped, drawn, sized, annealed, then finished-formed. In addition, you can see how bullets are formed then inserted in cartridges with automated machinery. This is a fascinating video, worth watching.
Bullet-Making Process at the Sierra Bullets Plant
A second video, produced for the Discovery Channel’s How Stuff Works TV show, illustrates how bullets are made at the Sierra Bullets plant. Watch 80-lb billets of lead being drawn into wire to be used as bullet cores. Then see how copper jackets are formed, lubed, sized and combined with bullet cores to create the finished product — precision bullets for hunters and match shooters.
Thanks to German Salazar for finding these two videos.
Share the post "Videos Show How Loaded Cartridges and Bullets Are Crafted"
November 17th, 2009
 ATK (Alliant Techsystems) (NYSE: ATK), the world’s largest ammo producer, manufactures CCI, Federal, and Speer ammo, plus CCI and Federal primers. ATK is also the parent company of Alliant Powder and ATK runs the Lake City Army ammunition plant. That’s why changes at ATK can affect shooters nationwide.
ATK announced that after more than six years as ATK chairman and CEO, Daniel J. Murphy will retire in March, 2010. The company’s board of directors has appointed General Ronald R. Fogleman to serve as Chairman of the board of directors. The board also elected John L. Shroyer, ATK’s current chief financial officer (CFO), to serve as interim CEO. The appointments are effective immediately.
In related news, ATK announced that second-quarter profit rose 18 percent, helped by stronger sales of ammunition for security forces in Afghanistan. The company said that demand remained strong for ATK’s commercial ammunition brands and products. “I am particularly pleased with the growth of our commercial businesses both in ammunition, aircraft structures and elsewhere across the company,” said John Shroyer, interim CEO, senior vice president and CFO.
Share the post "John Shroyer Takes Over ATK as Current CEO Retires"
July 3rd, 2009
Dateline: July 3, 2009, 2:00 pm Pacific Time
IMPORTANT NOTICE: Bruno Shooters Supply has just received a substantial shipment of one-thousand-count boxes of Federal 205M Small Rifle Match primers. These are available for immediate delivery. Price is $49.95 per 1000 primers. There is a limit of 10,000 primers (10 boxes) per customer. The price does NOT include shipping and hazmat fee. To order these primers, call Amy Bruno at 1-800-455-0350, or (623) 587-7641, or log on to www.Brunoshooters.com.
Share the post "HOT NEWS: Bruno's has Federal 205M Small Rifle Primers"
|
