Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









April 29th, 2012

Gary Eliseo Runs ‘Mad Minute’ Drill with Modern Tubegun

Mad Minute Gary EliseoThe Top Shot TV show recently featured the “Mad Minute”, a high-speed drill requiring shooters to place as many hits as possible on a steel plate set at 200 yards. The time limit was one minute, and shooters were using historic Lee-Enfield bolt-action rifles. Top Shot’s “Mad Minute” was based on a British Army training drill. Soldiers were expected to get at least 15 hits on an bullseye target at THREE hundred yards. Top Shot cheated a bit, placing the target at 200 yards (instead of 300 in the real British Army “Mad Minute” drill). Still the two Top Shot shooters managed only six (6) shots each in one minute. Consider that a “passing score” for a Brit soldier was 15 hits, you have to give credit to those WWI-era Tommies.

Watch Gary Elesio Shoot the ‘Mad Minute’ (Starts at 4:47 on Video)

Elesio Gets 24 hits on 300-yard Target in One Minute
Using an Eliseo RTM Tubegun chambered in .308 Winchester, Gary Elesio attempted the “Mad Minute” last weekend. Gary ended up with 24 hits on a bull target set at 300 yards. That’s four times as many hits as the Top Shot competitors. Gary actually had 25 hits in 25 rounds fired, but the last round hit just after the 60-second time period expired. Note how Gary pulls the trigger with the middle finger of his right hand. This allows him to work the bolt faster, using his thumb and index finger. The straight-through (inline stock) design of the Tubegun allowed Gary to maintain his cheekweld and head position throughout the minute-long drill.

Gary Eliseo Mad Minute

Gary told us: “This isn’t easy. I came away very impressed with the training of the Tommy soldiers if they could make 15 hits in one minute. We had some skilled shooters who brought their own Lee-Enfields and they only did as well as the guys on Top Shot — making six or seven hits in a minute. The problem is that, with the cock-on-close operation of the Lee-Enfield, the gun would push away when the shooter closed the bolt, so the shooter would lose his sight picture, and have to re-center the rifle. I am truly astounded that the record for the ‘Mad Minute’ is 38 shots. That is hard to do with an AR, much less any bolt gun.”

Gary Hopes to Beat the ‘Mad Minute’ Record in the Future
The record for the “Mad Minute” — 38 shots on target at 300 yards — was set in 1914 by Sergeant Instructor Alfred Snoxall*. In the subsequent 98 years, that record has never been broken by any shooter with a conventional bolt-action rifle. Gary told us: “As long as that record still stands, I’m going to keep working at it. I know I lost a few seconds with mag changes. I think with some additional training, I can increase my score. Still, 38 hits is phenomenal. I am very, very impressed at what that guy did — it’s really mind-boggling to do that with an Enfield. Contrary to what has been written, those old Enfields are not that easy to shoot fast. Our club shooters found that out.”

* There is some uncertainty concerning the size of the target used by Snoxall. Some internet reports say the target was 12″ x 12″. Other posts, from England, suggest the target was 36″ by 36″. If the target was a 12″-diameter bull, Snoxall’s achievement is even more amazing.

‘Mad Minute’ and British Marksmanship with the SMLE (Lee-Enfield)
Commentary by Laurie Holland

The original military requirement of the ‘Mad Minute’ saw the soldier ready to fire with a round in the chamber, 9 in the magazine, safety on. This course of fire is still followed by the GB Historic Breechloading Arms Association and other bodies in their recreated ‘Mad Minute’ competitions.

The first 10 would go quickly, but reloads were critical, this not done by a magazine change as Gary did with the RTM or in a modern tactical or semi-auto rifle, but through slick use of ‘chargers’. It is this aspect which fouls so many of my colleagues up as it’s very easy to cause a jam and a large part of 60 seconds can go in sorting it out!

As well as the training Gary mentions and commends, there were pay incentives / penalties for certification or failure, and there were valuable monetary and kudos benefits in achieving very high hit counts in the 20 + range. Tommies could draw their rifles from the armoury any time when off duty and spent hours in barracks practising using inert rounds and dry firing. For instance, a common practice was to balance a halfpenny coin on the foresight blade between the sight protecting ears and take shot after shot prone on the barracks floor until the trigger was pressed and the ‘shot taken’ without the coin falling off its perch.

Charger clips were selected for those that just held the rounds firmly enough to stop then falling out, were sand-papered and polished with a stove / fireplace polish called ‘Zebrite’ so that the rimmed rounds would slip through the clips like corn through a goose.

If you’re unfamiliar with the cock-on-closing Enfield action, it seems clumsy. With intensive practice it is very smooth and can be operated incredibly quickly. The trick is to whip the bolt back onto its stop and initiate a rebound movement that takes it and the cartridge well into the chamber thereby reducing the effort required to close the bolt and chamber the round.

lee enfield 1916 rifle

None of this is to detract from the skill many of these guys had and the fantastic results they got both in rate of fire and accuracy out to 500/600 yards. That came from long days of live firing at full distances — far more practice than I’ll warrant US doughboys got at that time. The result was when the small British Expeditionary Force acted a blocking force against two advancing German infantry corps in Belgium in the autumn of 1914. Kaiser Wilhelm predicted confidently that his highly trained ‘Landsers’ would sweep this ‘contemptible little army’ aside. Instead, the Germans advancing in the open at ranges they felt was safe from rifle fire ran into a wall of lead of such a rate and accuracy that regimental commanders explained their failure to advance and massive casualties through the British having far more automatic weapons than their intellignce had briefed. The British survivors of that period adopted the self-styled title of ‘Old Contemptibles’ as an ironic rebuke to Wilhelm, one still used today. By Christmas 1914 that small and highly professional British army had been destroyed through attrition and army rifle competitions aside never achieved those riflecraft standards again — but of course that’s what a machinegun is for and it was criminal that BEF battalions (600-1,000 men) went to war with an establishment of only two Vickers-Armstrong machine-guns — a fraction of that in the opposing German units.

Permalink - Videos, Competition 24 Comments »
March 19th, 2012

New AR Buttstock Adapter for Eliseo Tubegun Chassis Kits

Eliseo CSS Tubegun AR AdapterHere’s good news for AR fans who want to add an ultra-accurate Tubegun to their rifle collection. Now you can use many popular AR-specific buttstocks with Eliseo CSS Tubegun Chassis Kits. Gary Elesio has crafted a new adapter that fits between the Tubegun’s action sleeve and the buttstock, allowing the use of the many AR buttstocks which fit an AR buffer tube. The new adapter, priced at $60.00, is a simple, no-gunsmithing installation.

The buffer tube (with buffer removed) simply screws into the female-threaded CSS adapter unit, and then the AR buttstock is secured to the buffer tube (either by set-screws or locking collars, depending on the design). Finally, the whole assembly (AR buttstock plus adapter) slides into the rear of the Tubegun’s action sleeve, where it is secured by a tensioning screw.

Eliseo CSS Tubegun AR Adapter

Gary Eliseo of CompetitionShootingStuff.com (CSS) explains: “I’ve had lots of demand to support AR buttstocks on my chassis systems. The Lightweight Hunter Chassis will now be supplied with an adapter for mounting an AR buffer tube. This adapter, with an anodized finish, will also be available as an option for other CSS Chassis Kits. The whole system is reasonably light with an AR buttstock installed. With an ACE skeleton-style AR stock (shown in photos) the whole Tubegun weighs right at eight (8) pounds. That was with action in place and a 24″ sporter-weight barrel, but without optics. Some heavy-barrel ARs weigh more than that.” NOTE: The Chassis in the photos is right off Gary’s machines, so it is bare metal. As delivered, CSS Chassis Kits come with an Anodized, Cerakote, or Powder-coat finish, according to buyer preference.

Eliseo CSS Tubegun AR Adapter

Eliseo’s Light Weight Hunter (photo below) will now be delivered with the AR adapter, rather than a CSS-made buttstock. This gives the chassis purchaser the ability to choose from a variety of third-party buttstock designs, including collapsible stocks. The good news is the price of the CSS Light Hunter Chassis with Cerakote finish will be reduced $90.00 to $685.00. That’s a great deal when you consider most guys can use a buttstock they already acquired for their AR(s). If you have any questions about Gary’s new buttstock adapter, you can post in this Forum Thread, and Gary can give you an answer. Alternatively, email your questions to: order.info [at] competitionshootingstuff.com.

Eliseo CSS Tubegun Light Weight Hunter

Shown above is Gary Eliseo’s Light Weight Hunter with original CSS-made tubular buttstock. From now on, Light Weight Hunter Chassis Kits will be supplied with an AR buttstock adapter (and no buttstock), so the purchaser can select his preferred buttstock design from a variety of third-party options. This change allowed CSS to reduce the Light Weight Hunter Chassis price to $685.00 (including adapter).
Permalink Gunsmithing, Hunting/Varminting, New Product 2 Comments »
February 4th, 2012

Innovative New Eliseo HD Bipod for Tube Guns

Gary Eliseo of Competition Shooting Stuff (CSS) is about to release his new Heavy-Duty (HD) bipod for his CSS tubegun chassis systems. In development for over a year, this unit is very innovative. To place the bipod’s rotational (swivel) axis as close as possible to the bore axis, the bipod actually attaches with a cylindrical bushing fitted to the front tube (handguard). This keeps the center of gravity low and significantly reduces perceived torque, particularly with .308 and larger calibers.

Eliseo HD Bipod Tubegun

You’ll also notice the large half-spherical leg bases. These have been called “golf-ball” feet or, alternatively, “mushroom heads”. Extensive testing showed that this design works really well, particularly for shooting off an uneven or inclined surface. Because the half-spheres contact the ground in just one point, you can easily adjust your rifle’s angle to the target. By contrast, some of the popular sled-type and ski-type bipod feet will dig one end into the ground if the rifle is angled up or down significantly relative to the ground plane. With the golf-ball feet you can shoot on a steep down-angle hill with no problems.

Eliseo HD Bipod Tubegun

Gary also found that the spherical “mushroom head”-style feet work real well on a shooting mat, sliding back smoothly on recoil without hopping too much. This is good for those guys who like to allow their rifle to slide back a bit to smooth out the recoil and follow-through. If you prefer to hold hard and brace firmly against the backward push of the rifle, you can screw down pointed spikes from the bottom of the ball feet. These spikes can be planted in the ground to anchor the gun against rearward movement. So, the spherical bases offer a choice of two shooting styles.

Gary explains: “The new CSS HD Bipod is designed specifically for my chassis systems. As you can see, the bipod mounts in the end of the hand guard so the rifle rotates on its central axis. Our testing shows that this mounting system works really well at controlling torque effects. The spherical feet are made of delrin so they slide easy if you want to let the recoil move back on recoil. But the round leg bases are drilled and tapped to accept track shoe spikes so you pre-load the bipod and hold hard if you prefer.”

Eliseo HD Bipod Tubegun

Eliseo HD Bipod TubegunBoth bipod legs are individually adjustable for height with an inner rod sliding in an outer tube on each side. Adjustment is continuous, with height fixed by way of a tensioning knob. It’s fast and easy to adjust height. One or both legs can also be retracted upwards in an arc, so they can be stowed parallel to the barrel (with tips facing either to the front or to the rear). The new Eliseo HD Bipod weighs 1 pound, 10 ounces — reasonably light considering how sturdy these units are. Pricing has not yet been set, but Gary says they should retail for under $200.00. For info, visit CompetitionShootingStuff.com.

Permalink Competition, New Product 4 Comments »