CCI is now producing Catalyst lead-free primers and Catalyst-primed CCI and Speer ammunition at the CCI factory in Lewiston, Idaho. The proprietary Catalyst lead-free primer was first developed in 2016 by Federal Ammunition, a CCI/Speer partner company. The advanced lead-free Catalyst primers have been used in CCI- and Speer-brand pistol ammo, and are featured in Federal’s Syntech Range ammo and American Eagle lead-free ammo. Eventually, CCI may eventually offer lead-free primers for the reloading market.
Writing for the MagLife Blog, Kat Ainsworth described Catalyst lead-free primers: “Many manufacturers use lead styphnate mixtures in the production of primers, but Federal Ammunition states the proprietary design utilized in the Catalyst is not only lead-free but outperforms those other methods. The company also says the Catalyst primers are safer to manufacture and provide a host of benefits over lead designs. For example, the Catalyst primers deliver greater compatibility with modern powders, produce less pressure from the gases generated during live fire, and don’t cause degradation in the powder they touch.
The company says these primers are extremely clean-burning which helps them perform more uniform and complete propellant combustion. Even better, the Catalyst has minimal velocity variation[.] These primers are also non-hydrophilic, meaning they don’t attract water molecules like DDNP-based mixes that are found in other brands[.]”
Catalyst Primers Promise Best-in-Class Performance
“We are extremely proud of this new production capability which continues the rollout of an incredible primer technology” said Federal/CCI/Speer President Jason Vanderbrink. “This product has proven to be the best in its class after nearly seven years of continuous production. Its consistent performance has been tested over hundreds of millions of rounds. Most notably, the product is featured in Federal’s innovative Syntech Range ammo and American Eagle Lead-Free.”
The extremely clean-burning Catalyst primer creates more uniform and complete propellant combustion, yielding minimal velocity variation and consistent bullet launch for improved accuracy. It is also non-hydrophilic, so it does not attract water molecules like DDNP-based mixes found in most lead-free primers, resulting in better reliability.
“Catalyst lead-free priming technology provides the cleanest, most consistent ignition possible. We are excited that our Lewiston plant is now set up to run Catalyst priming in our target pistol products”, said Speer and CCI’s Director of Factory Operations Mike Overberg. “The Anoka facility has proven this to be the best lead-free priming technology available. Our staff here has done a fantastic job of working across factories to extend this product into Speer and CCI Blazer ammunition products made in Lewiston, Idaho.”
Share the post "CCI Now Producing Catalyst Lead-Free Primers in Idaho"
22Plinkster Tours CCI/Speer Idaho Factory
Trickshot artist and YouTube host 22Plinkster recently got a chance to tour the CCI/Speer production facility in Lewiston, Idaho. This large plant produces both rimfire and centerfire ammunition. While touring the plant, 22Plinkster was allowed to capture video showing the creation of .22 LR rounds from start to finish. This is a fascinating video, well worth watching.
This revealing video shows all phases of .22 LR ammo production including cupping, drawing, annealing, washing, drying, head-stamping, priming, powder charging, bullet seating, crimping, waxing, inspection, and final packaging. If you’ve got ten minutes to spare, we really recommend you watch the video from start to finish. You’ll definitely learn some new things about rimfire ammo.
The Manufacturing Process for .22 LR Rimfire Ammunition Shooting Sports USA explains: “Rimfire cartridge cases are the oldest self-contained cartridge in existence, having been in continuous production since the mid-1850s. Rimfire cases are drawn from a thin piece of brass and formed with a hollow rim. A priming compound is then forced into the case using centrifugal force, where it is charged with powder and a bullet is seated in the mouth of the case. The case is then crimped around the bullet to ensure sufficient push and pull when the round is fired. When the firing pin strikes the thin brass rim of the case, the hollow rim is crushed and the primer is ignited.” Source: SSUSA.org 9/2/2017.
Buried in CCI Rimfire Ammo
.22 Plinkster was literally up to his neck in ammo while touring the CCI/Speer Idaho ammo plant. He says: “This was truly a dream come true for me. I can’t thank the people at CCI and Speer enough for allowing me to do this. I couldn’t possibly show everything that went on at the factory. However, hopefully I showed you enough for you to grasp the concept of how rimfire [ammo] is made.”
Speer Brothers Brought Ammo Production to Lewiston
Here is an interesting historical footnote. Today’s large CCI/Speer operation in Idaho can be traced back to the companies founded by the Speer brothers. After settling in Lewiston in 1944, Vernon Speer started Speer Bullets. A few years later, in 1951, Vernon’s brother Dick (with partner Arvid Nelson) started Cascade Cartridges Inc., a producer of small-arms ammunition and primers. Yes, as you may suspect, Cascade Cartridges Inc. is now CCI, a Vista Outdoor company, and one of the largest manufacturers of primers and loaded ammunition. Today, the CCI/Speer Lewiston plant produces both Speer bullets and CCI-branded ammunition and primers. Vista Outdoor’s predecessor, ATK, acquired the plant in 2001. Vernon Speer died in 1979, and Dick Speer died in 1994.
Share the post "Rimfire Genesis — How CCI .22 LR Rimfire Ammo is Made"
22Plinkster Tours CCI/Speer Idaho Factory
Trickshot artist and YouTube host 22Plinkster recently got a chance to tour the CCI/Speer production facility in Lewiston, Idaho. This large plant produces both rimfire and centerfire ammunition. While touring the plant, 22Plinkster was allowed to capture video showing the creation of .22 LR rounds from start to finish. This is a fascinating video, well worth watching.
This revealing video shows all phases of .22 LR ammo production including cupping, drawing, annealing, washing, drying, head-stamping, priming, powder charging, bullet seating, crimping, waxing, inspection, and final packaging. If you’ve got ten minutes to spare, we really recommend you watch the video from start to finish. You’ll definitely learn some new things about rimfire ammo.
.22 Plinkster was literally up to his neck in ammo while touring the CCI/Speer Idaho ammo plant. He says: “This was truly a dream come true for me. I can’t thank the people at CCI and Speer enough for allowing me to do this. I couldn’t possibly show everything that went on at the factory. However, hopefully I showed you enough for you to grasp the concept of how rimfire [ammo] is made.”
Speer Brothers Brought Ammo Production to Lewiston
Here is an interesting historical footnote. Today’s large CCI/Speer operation in Idaho can be traced back to the companies founded by the Speer brothers. After settling in Lewiston in 1944, Vernon Speer started Speer Bullets. A few years later, in 1951, Vernon’s brother Dick (with partner Arvid Nelson) started Cascade Cartridges Inc., a producer of small-arms ammunition and primers. Yes, as you may suspect, Cascade Cartridges Inc. is now CCI, a Vista Outdoor company, and one of the largest manufacturers of primers and loaded ammunition. Today, the CCI/Speer Lewiston plant produces both Speer bullets and CCI-branded ammunition and primers. Vista Outdoor’s predecessor, ATK, acquired the plant in 2001. Vernon Speer died in 1979, and Dick Speer died in 1994.
Share the post "How Rimfire Ammo is Made — CCI/Speer Factory Tour Video"
