Upgrading an Older Model 54 Anschütz — Recommended Smiths
Do you have an older Anschütz model 54-actioned match rifle with a press-in barrel? Perhaps you want to re-barrel your Anschütz to get a few more years of precision shooting out of the old warhorse? Or maybe you want to adapt the Anschütz to a modern stock design for Silhouette, Rimfire Benchrest, or Prone shooting. If you’ve got an older Anschütz m54 that needs re-barreling, you need to send it to a gunsmith who has a proven track record with the model 54s, a smith who can remove the original barrel properly and then install either a new press-in barrel, or a screw-in barrel (after threading the action).
Mark Penrod — Recommended Anschütz Smith
Forum member Edward (aka EAL22) suggests sending Anschütz rimfire projects to Mark Penrod in North Manchester, Indiana. Writing in our Shooters’ Forum, Edward states:
“Penrod can fix you up. He can either press fit [a new barrel] or thread your action [for a screw-in barrel]. He has built guns both ways. Here are some photos of his work. It’s not a bench gun but a nice Anschütz in a System Gemini stock.”
Forum member Bill B. concurs: “I second the suggestion that you send it to Mark Penrod. I’ve just got done working with him on a Hall rimfire action to which he fitted two barrels, a Benchmark and a Lilja. I am building a prone position rifle. He was easy to work with providing good communication, and he’ll do whatever is needed to make your rifle shoot its best.”
Other Recommended Smiths — Bruce Hongista and MT Guns
Another recommended rimfire smith is Bruce Hongisto. Forum member Steve W., a benchrest shooter, says: “My suggestion is to email Butch Hongisto at Hongisto [at] fidnet.com. Butch does amazing work and has made two rimfires for Lapua to use in their factory accuracy evaluations in Finland. Write Butch and ask him which way you should go. He knows his stuff.”
In California, Chesebro Rifles (the successor to Mac Tilton’s MT Guns) has a vast selection of older Anschütz match rifles. Gunsmith Mark Chesebro can rebarrel an older model 54 as well as adapt older Anschütz rifles to modern stocks. Mark even is working on converting single-shot model 54s to repeaters fitted with sturdy, inexpensive CZ detachable magazines. I’ve held the prototype repeater conversion with a 24″ barrel, and it is very cool. I predict the rimfire tactical guys will be lining up to buy these single-shot-to-repeater conversions. Availability is still a few months away. For more info, visit ChesebroRifles.com.
