Many novice hand-loaders believe that neck bushing Inside Diameter (ID) size is the only important factor in neck tension. In fact, many different things will influence the grip on your bullet and its ability to release from the case neck. To learn the ins and outs of neck tension, take some time and read this article carefully.
Neck Tension (i.e. Grip on Bullets) Is a Complex Phenomenon
While we certainly have considerable control over neck tension by using tighter or looser bushings (with smaller or bigger Inside Diameters), bushing size is only one factor at work. It’s important to understand the multiple factors that can increase or decrease the resistance to bullet release. Think in terms of overall brass-on-bullet “grip” instead of just bushing size (or the internal neck diameter in non-bushing FL dies).
Bullet grip is affected by many things, such as:
1. Neck-wall thickness.
2. Amount of bullet bearing surface (shank) in the neck.
3. Surface condition inside of neck (residual carbon can act as a lubricant; ultrasonic cleaning makes necks “grabby”).
4. Length of neck (e.g. 6mmBR neck vs. 6mm Dasher).
5. Whether or not the bullets have an anti-friction coating.
6.The springiness of the brass (which is related to degree of work-hardening; number of firings etc.)
7. The bullet jacket material.
8. The outside diameter of the bullet and whether it has a pressure ridge.
9. Time duration between bullet seating and firing (necks can stiffen with time).
10. How often the brass is annealed.
11. Amount (length) of neck sized (e.g. you can size only half the neck).
12. Interior diameter of bushing, or neck section of non-bushing die.
— and there are others…
One needs to understand that bushing size isn’t the beginning and end of neck tension questions, because, even if bushing size is held constant, the amount of bullet “grip” can change dramatically as the condition of your brass changes. Bullet “grip” can also change if you alter your seating depth, and it can even change if you ultrasonically clean your cases.
In our Shooters’ Forum a reader recently asked: “How much neck tension should I use?” This prompted a Forum discussion in which other Forum members recommended a specific number based on their experience, such as .001″, .002″, or .003″. These numbers, as commonly used, correspond to the difference between case-neck OD after sizing and the neck OD of a loaded round, with bullet in place. In other words, the numbers refer to the nominal amount of interference fit (after sizing).
While these commonly-used “tension numbers” (of .001″, .002″ etc.) can be useful as starting points, neck tension is actually a fairly complex subject. The actual amount of “grip” on the bullet is a function of many factors, of which neck-OD reduction during sizing is just one. Understanding these many factors will help you maintain consistent neck tension as your brass “evolves” over the course of multiple reloadings.
Seating Depth Changes Can Increase or Decrease Grip on Bullet
You can do this simple experiment. Seat a boat-tail bullet in your sized neck with .150″ of bearing surface (shank) in the neck. Now remove the bullet with an impact hammer. Next, take another identical bullet and seat it with .300″ of bearing surface in another sized case (same bushing size/same nominal tension). You’ll find the deeper-seated bullet is gripped much harder.
Neck-Wall Thickness is Important Too
I have also found that thinner necks, particularly the very thin necks used by many PPC shooters, require more sizing to give equivalent “grip”. Again, do your own experiment. Seat a bullet in a case turned to .008″ neckwall thickness and sized down .003″. Now compare that to a case with .014″ neckwall thickness and sized down .0015″. You may find that the bullet in the thin necks actually pulls out easier, though it supposedly has more “neck tension”, if one were to consider bushing size alone.
In practical terms, because thick necks are less elastic than very thin necks, when you turn necks you may need to run tighter bushings to maintain the same amount of actual grip on the bullets (as compared to no-turn brass). Consequently, I suspect the guys using .0015″ “tension” on no-turn brass may be a lot closer to the guys using .003″ “tension” on turned necks than either group may realize.
Toward a Better Definition of Neck Tension
As a convenient short-cut, we tend to describe neck tension by bushing size alone. When a guy says, “I run .002 neck tension”, that normally means he is using a die/bushing that sizes the necks .002″ smaller than a loaded round. Well we know something about his post-sizing neck OD, but do we really have a reliable idea about how much force is required to release his bullets? Maybe not… This use of the term “neck tension” when we are really only describing the amount of neck diameter reduction with a die/bushing is really kind of incomplete.
My point here is that it is overly simplistic to ask, “should I load with .001 tension or .003?” In reality, an .001″ reduction (after springback) on a thick neck might provide MORE “grip” on a deep-seated bullet than an .003″ reduction on a very thin-walled neck holding a bullet with minimal bearing surface in the neck. Bushing ID is something we can easily measure and verify. We use bushing size as a descriptor of neck tension because it is convenient and because the other important factors are hard to quantify. But those factors shouldn’t be ignored if you want to maintain consistent neck tension for optimal accuracy.
Consistency and accuracy — that’s really what this all about isn’t it? We want to find the best neck tension for accuracy, and then maintain that amount of grip-on-bullet over time. To do that you need to look not only at your bushing size, but also at how your brass has changed (work-hardened) with time, and whether other variables (such as the amount of carbon in the neck) have changed. Ultimately, optimal neck tension must be ascertained experimentally. You have to go out and test empirically to see what works, in YOUR rifle, with YOUR bullets and YOUR brass. And you may have to change the nominal tension setting (i.e. bushing size) as your brass work-hardens or IF YOU CHANGE SEATING DEPTHS.
Remember that bushing size alone does not tell us all we need to know about the neck’s true “holding power” on a bullet, or the energy required for bullet release. True bullet grip is a more complicated phenomenon, one that is affected by numerous factors, some of which are very hard to quantify.
UPDATE: Some readers did not understand how to most effectively use this price-tracking service. They wondered: “What good does it do for me to know past prices?” Well you can set a price target, and CamelCamelCamel.com will email you (in the future) when the price has dropped to that level. That’s a powerful tool that WILL save you money!
Take the time to read this article and we bet you’ll save $100.00 or more this year. Honest. This article explains how to find the right time to buy a product from Amazon.com at a super-low price. Amazon price trend graphs, updated by the hour, show exactly when prices have been slashed on your favorite Amazon items. With this “insider info” you can save big — often 50% or more. This applies to everything Amazon sells — optics, reloading gear, tools, electronics, you name it.
Here’s how it works — find a product you want on Amazon.com. Then go to CamelCamelCamel.com and enter the product in the search field. Usually the product name is enough, but you can also enter the Amazon URL. When the product appears in the search results, click on the product name. Then a chart will appear that shows the price trends for a given time period (All Time, 1 Year, 6 Months etc.). You can see right away if it’s time to buy, or you need to wait for a price reduction.
Here’s one example. Steiner makes a black version of its 8×30 Military-Marine Binoculars called the AZ830. We found these on sale for about $120.00 and posted that on our Deals of the Week. Later the same binoculars cost over $280! Yet some months before, this Steiners cost just $75.87! You could save $204.71 by buying at just the right time — that’s a 73% savings! Check out the 1-year price history from CamelCamelCamel.com:
Here’s another example, the popular RCBS Rock Chucker press. In the last year, the price has fluctuated between $166.68 and $112.49, a $54.19 difference! By using the CamelCamelCamel price checker website, you could snag a Rock Chucker for $112.49, saving over 32%.
Track Third-Party Prices As Well for Ultimate Savings
CamelCamelCamel will also give you the lowest third-party price on Amazon. This option shows products sold on Amazon but fulfilled by third parties. Check out this chart for the Kowa TSN-880, one of the best spotting scopes on the market. The third-party price is in blue. In the last year it bounced between $849.95 and $2450.00! That’s a difference of $1600.05, or 65%. Even measured vs. the Amazon direct sale high price ($2254.00), the savings is over 60%.
Set Up Your Own Price Watch Page with Notifications
We have no affiliation with CamelCamelCamel.com but we know it can help you save big money on Amazon purchases. We have subscribed to this service, and you may want to do so as well. When you subscribe, you can create a Product Price Watch List. Let’s say you’re looking to snag a Leica Rangefinder, Lyman BoreCam, and Vortex Scope. Put those items on your watch list and you can see price trends instantly whenever you visit CamelCamelCamel.com.
In addition, you can have email alerts sent to you when the price of a “watched” product hits a “trigger” price you set. For example, we told the site to let us know when the AZ830 binoculars hit $120.00 again. And we snagged a nice Seiko titanium watch recently, saving $90 on the price.
We have all been there…..you place a piece of tumbled brass in the shell-holder of your press, raise it into the die, and suddenly it is like somebody hit the brakes. The case is stuck in the die. Your first instinct is to reverse it out. You crank on the handle, and BANG! The rim rips off the case head and you are looking at a piece of brass stuck in the die.
A stuck case is one of the boo-boos that all of us reloaders have faced from time to time. If proper lubrication is applied, then it should not be a problem. No matter if you are a seasoned reloader or new to it, this situation can happen. Take your time, use the proper procedures, and you will be back in business in no time! This article explains how to avoid stuck cases (through proper lubrication) and how to use a stuck case removal system.
What Causes Stuck Cases
One of the first common mistakes reloaders face is the stuck case. It can be caused by too much or too little lube. Too much and a vacuum can be formed causing the case to become suctioned into the die. Too little lube and friction is the culprit. So what is the cure? There is no exact cure, but the best lube that we have found so far is just a dab of Imperial Sizing Die Wax on your fingers and applied in a thin coat on the body of the case, not the shoulder or neck. Too much of this wax can cause the vacuum effect, or can eventually load your die up with gobs of residue. If it is applied to the shoulder area, or the leftover wax moves up into the shoulder region of the die, you will see dents or dimples in the shoulder. [AccurateShooter.com Editor’s Note: For normal full-length sizing of small cases such as 220 Russian/PPC, 6mmBR, 6.5 Grendel, or 6.5×47 Lapua we recommend Ballistol (aerosol) lube. It is very slippery, goes on very thin, and does not gum up the die.]
A great way to ensure that your dies are clean is to use a simple chamber mop with a dab of your favorite solvent on it and clean out the die. Be sure all of the solvent is out after cleaning by spraying the die out with Quickscrub III or use a clean chamber mop. If you are storing your dies, you can apply a thin coat of a good oil to protect the steel such as TM oil or Starrett M1 Spray.
Using a Stuck Case Removal Kit
If you do stick a case in your die there are a few good stuck case removal kits available. Each one works in a similar fashion. I have found the Hornady kit very effective and easy to use.
Basically what you do is remove the die from the press. Unscrew the decapping assembly and pull it out as far as you can. You then need to drill/tap threads into the stuck case head (this is why it is suggested to unscrew the decapping assembly as far as you can to get it clear of the drill bits). Once this is done screw the die back into the press. You then install the included shellholder attachment on the shellholder ram, and thread it into the case via a small wrench. With some elbow grease you can reverse the stuck case out of the die with the leverage of the press, and not damage the die.
However if the case is stuck….REALLY stuck, you may pull out the threads on the case and you are still left with a stuck case in the die without any way to pull it out. If the case is really difficult to remove even with the use of a stuck case removal kit, do not try to be Hercules with the press ram. Here is a trick that may work. Take the die with the stuck case and place it in your freezer for a couple of hours. Then repeat the removal with the cold die. The freezing temperatures may cause the brass to contract, and make removal easier. If this does not work it is recommended to send it to the die manufacturer. They will be able to remove the case without damaging the die.
Another fix if you can remove the decapping assembly completely is to use a tap hammer and a punch or small wooden dowel to knock the stuck case out. This isn’t the best way since it is very possible that you will damage the die internally or externally on the threads, or both. Send the die to the manufacturer to have this done properly. You will be happier in the long run.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. EuroOptic Moving Sale — Prices Slashed on Schmidt & Bender
EuroOptic is moving to a larger facility. To ease the transition, EuroOptic wants to reduce its vast Schmidt & Bender inventory: “We at EuroOptic are gearing up to move to our brand-new facility, and we’re making you the benefactor — by giving you a chance to get some stellar pricing on Schmidt Bender optics, and thereby saving us some sweat moving all of our inventory! We’ve got some absolutely awesome deals available, for only the next two weeks — sale ends July 26th.”
Here are just a few of the bargains. Many other S&B models are discounted — from 1-8x24mm all the way up to the vaunted 5-25x56mm PM II, with most models in between:
Sale tip from EdLongrange.
2. Amazon — RCBS Rock Chucker Supreme Press, $112.49
We said this was a great deal last week at $126.99 — and now the Rock Chucker is just $112.49 at Amazon — the lowest price we’ve seen in years. The RCBS Rock Chucker remains a classic — a big, strong, versatile press that can handle most reloading chores with ease. And now you can get a genuine Rock Chucker Supreme for $112.59 — an insanely great deal. The Rock Chucker offers plenty of leverage for case-sizing and the “O” is tall enough for long cartridges. The Rock Chucker has a very strong base and should last a lifetime. We do recommend doing priming with a separate priming tool.
3. Natchez — Leupold VX-6 Scopes Closeout, Save Hundreds
Natchez Shooters Supplies is running a big sale on Leupold VX-6 scopes. You can save hundreds of dollars on a wide variety of VX-6 optics, from 1-6x24mm up to 3-18x50mm models. If you are looking for a high-quality hunting optic at a great price check out these deals. For example, Leupold’s 2-12x42mm FireDot (Illum.) Duplex VX-6 scope is marked down from $1199.99 to just $749.99 — a $450.00 savings! Shown above are four hot deals, but a dozen Leupold VX-6 models on are sale now.
4. Natchez — Special 5 Reloading Press Kit, $199.99
This is an excellent entry-level reloading kit, which is on sale for $199.99 at Natchez Shooters Supplies. We like the relatively compact Special 5 press for most reloading duties. Eventually you many want to add an additional large heavy press, but this will get the job done. This kit includes an RCBS Powder Measure, Digital Scale, Powder Trickler, Hand Priming Tool, Load Manual, Loading Tray, and more. It’s hard to beat this combination of tools for under $200.00.
Lapua Scenar-L bullets are superb. We have found these bullets to be extremely consistent in weight and base to ogive measurement. Scenar-L bullets also shoot great. We think serious shooters owe it to themselves to try a box of Scenar-Ls for their favorite match rifle. And now .224, 7mm (.284), and .308 caliber shooters have the opportunity to grab some great Scenar-Ls for an amazingly low price. Right now Grafs.com is running a SALE on select Scenar-Ls in .224, .284, and .308 calibers. These are priced 46% Off, saving you up to $26.00 per 100-count box! NOTE: The 180gr 7mm and 220gr .308 bullets are both outstanding choices for F-Class and long-range competition.
Grab a Walther PPS M2 for under $300.00. This is a great little concealed carry pistol. You can run it with a flush mag for deep concealment or with an extended mag that provides a more comfortable grip (photo at right). This week, CDNN Sports is offering special sale pricing on the Walther PPS M2. Get $60 off regular the retail price. Combine that with Walther’s $100 manufacturer rebate, and you can get the PPS M2 for just $299.99.
We do like this little pistol — it’s comfortable, accurate, and has a decent trigger. The PPS M2 is the carry choice of our System Administrator. READ PPS M2 Review.
We use 1″-diameter Target Spots for sight-in and practice at 100-300 yards. These bright red/orange self-adhesive dots are easy to see. At 100 yards the high-contrast black diamond centers provide precise aiming points. We found this 10-pack of target spots on Amazon at a rock-bottom price. You get 630 total stick-on dots for just $9.65 with FREE Shipping. You can also get 360 Birchwood Casey 1″ dots from Midsouth for just $3.15, but shipping is extra. If you’re already ordering something from Midsouth, you may want to add the dots to your order.
8. Amazon — PRS Practical Shooting Book — $17.88
Thinking of getting started in the Practical/Tactical shooting game? Looking for ways to be more stable when shooting from unconventional positions? Then you may want to read Marcus Blanchard’s Practical Shooter’s Guide (A How-To Approach for Unconventional Firing Positions and Training). Unlike almost every “how to shoot” book on the market, Blanchard’s work focuses on the shooting skills and positions you need to succeed in PRS matches and similar tactical competitions. Blanchard provides clear advice on shooting from barricades, from roof-tops, from steep angles. Blanchard says you need to train for these types of challenges: “I believe the largest factor in the improvement of the average shooter isn’t necessarily the gear; it’s the way the shooter approaches obstacles and how they properly train for them.”
9. Bullets.com — Big CLOSEOUT Sale on Ammo
Bullets.com has a large selection of rifle, pistol, and shotgun ammunition on sale. You can get name-brand ammo at big savings right now. If you’re looking for factory pistol ammo you should definitely shop at Bullets.com this week. And there are even deals to be had on ultra-premium Lapua ammo — just about the best factory ammunition you can buy (at any price).
Every serious hand-loader can use a powered Case Prep station. This multi-function device saves time and avoids repetitive manual labor (that can be downright painful after 50+ cases). Now you can get the Lyman Case Prep Xpress for a crazy low price. Midsouth just slashed its price on the Case Prep Express, and this unit also qualifies for a sweet $25 Rebate from Lyman. That puts your net cost at just $84.99. Hard to argue with that. Your wrists and fingers will thank you.
The Case Prep Xpress lets you chamfer inside and out, brush case-necks, clean/uniform primer pockets, and ream military crimps. However, the unit does NOT trim cases. The motor is powerful and the Xpress is easy to clean. On sale at MidSouth for $109.99 ($84.99 after Rebate), this is a great deal. You can also purchase at Amazon for $107.71 with free Prime Shipping ($82.71 after Rebate).
The Lyman Case Prep Xpress comes with all the necessary tools (listed above), so you don’t have to purchase extra accessories. The five (5) gear-driven heads on the unit are powered by a high torque, low-speed motor ideal for case prep operations. Lyman’s Case Prep Xpress features handy storage areas for accessories, a removable brass shavings dump pan, and a handy clean-up brush.
Sinclair Int’l video clearly illustrates all case prep functions. Worth watching.
In the four years that this product has been on the market it has been a strong seller. If you’re prepping hundreds of cases, this unit will save considerable time and reduce hand/finger fatigue. While the Case Prep Xpress is not as sturdy as the metal-bodied Hornady prep center, the Lyman unit offers a lot of functionality for the money.
Lyman Case Prep Xpress Pros and Cons
GOOD Features
Quite Affordable (under $120)
Compatible with RCBS and Redding Tool-heads
Removable Bin for Shavings
Four Brush Sizes: .25, .30, .38, .45
Compact Footprint
Not-So-Good Features
Tool-heads Not Particularly Sharp
No Case Trim Function
No Flash-hole Uniformer
No Top Dust-Cover
Only 1-Year Warranty
Reviews by Verified Purchasers
“Case prep is the most tedious and boring aspect for hand loading in my opinion. The process center makes all the steps in prepping the case very quick and with consistent results. It has reduced the time required to do these steps with separate tools by easily 50% if not more. Highly recommended.” — Brandon G.
“Quiet and capable. Worth every penny. I adapted a Lee Cutter and Lock Stud, to cut case lengths, and I can fly through my brass. I can do so much more brass without getting the sore, cramped-up hands.” — Dean Ellis
“This unit has plenty of torque, and my unit is very quiet. This unit will also work with tools made by RCBS and Hornady, or anything else with 8-32 threads. My Redding tools (specifically, my primer pocket uniformers) do in fact fit on this machine. This unit is certainly worth the money, and will revolutionize the way you reload by saving you massive amounts of time and wear on your hands/fingers.” — Mule
It’s July 4th, that means fireworks displays. What better time to order up some gunpowder? We’re pleased to report that Midsouth Shooters Supply and Powder Valley have received some big shipments from the major powder makers. In stock now at Midsouth and Powder Valley are many of the most popular accuracy powders, including: Hodgdon Varget, Hodgdon 4198, Hodgdon 4831, IMR 4166, IMR 8208 XBR, Vithavuori N133, Accurate LT30 and LT32, Norma 203B, Alliant Reloder 15, and many more. Sorry these vendors don’t have H4350 and Reloder 16, but Midsouth has the vast majority of the propellants our benchrest and precision shooters favor.
H4198 and LT30 are great for the 30BR, AR Comp and CFE 223 are excellent for Service Rifle shooters, VV N133 is a top choice for the 6PPC, Norma 203B (nearly identical to Reloder 15) is great in the 6mmBR and Dasher, IMR 8208 XBR is very accurate in the .308 Win, and Hodgdon H4831 is an excellent choice for the .284 Winchester and 7mm WSM.
All these popular Powders (and many more) are in stock:
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
Tomorrow is Independence Day. Here’s the perfect product for the Fourth of July — a Red, White, and Blue AR upper. This “Stars & Stripes” Limited Edition combines the Guntec USA stripped Upper Receiver with the Guntec USA 15″ Keymod handguard, tricked out with a patriotic paint scheme. The upper may be used to build multiple calibers in the AR15 family such as .223 Remington, 6.5mm Grendel, and 300 AAC to name a few. NOTE: This is just a stripped upper receiver and handguard, NOT a “complete” upper. You’ll still need barrel, bolt/carrier, buffer tube, buttstock, and complete lower assembly.
2. Bullets.com — Big CLOSEOUT Sale on Ammo
Bullets.com has a large selection of rifle, pistol, and shotgun ammunition on sale. You can get name-brand ammo at big savings right now. If you’re looking for factory pistol ammo you should definitely shop at Bullets.com this week. And there are even deals to be had on ultra-premium Lapua ammo — just about the best factory ammunition you can buy (at any price).
3. Amazon — RCBS Rock Chucker Supreme Press, $126.99
The RCBS Rock Chucker remains a classic — a big, strong, versatile press that can handle most reloading chores with ease. And now you can get a genuine Rock Chucker Supreme for $126.99 — a very good deal. The Rock Chucker offers plenty of leverage for case-sizing and the “O” is tall enough for long cartridges. The Rock Chucker has a very strong base and should last a lifetime. We’re not fans of the Rock Chucker’s priming system but most serious reloaders use a separate priming tool.
This Master Tumbler Kit contains everything you need to tumble rifle or pistol brass. Now on sale for $56.07 with free Prime shipping, this Kit contains: Vibratory Tumbler, Rotary Media Separator, Plastic Bucket, 3 lbs. Cleaning Media, and 4 oz. Brass Polish. NOTE: We considered this an excellent deal when it was priced around seventy bucks. At $49.50 it is a total steal — you could easily pay more than that for a decent vibratory tumbler alone.
5. Whittaker Guns — Howa Lightning 6.5 Creedmoor Rifle, $299.99
With this deal you can get a complete 6.5 Creedmoor Howa 1500 Rifle with HACT 2-Stage Trigger for just $299.99. That’s $150.00 less than the price of a Howa 1500 barreled action by itself! ($449.99 at Brownells). This is a no-frills rifle, but its hard to beat the $299.99 price for a solid, multi-purpose rifle. Use “As-Is” for hunting or drop it into a modular stock for tactical/practical games.
6. MidwayUSA — Packable Shooting Mat, $19.99
Here’s a heck of a deal on a good light-weight shooting mat. MidwayUSA has slashed the price on its Packable Shooting Mat. Available in Coyote Tan or Olive Drab, this 67″ Long x 31″ Wide padded mat is now just $19.99. This Packable Mat has some nice features, such as 12″ front flap, elbow pads, 0.15″ thick padding, and six staking grommets. It’s easy to transport, rolling up to a 9″ x 4.5″ package, secured with a heavy strap. If you need a low-cost, basic shooting mat, check out this deal. Weighing just 1.5 pounds, this a good, light-weight mat to keep in a vehicle or to use on a “walk-around” varminting hunt.
7. Midsouth — Lee Auto Bench Priming Tool, $23.99
This relatively new bench tool does the job very well, and it’s easy to change primer sizes and shell holders. The “feel” of this tool is very good (better than most other bench priming units). If you like to pre-prime cases before using a progressive — this $23.99 Lee Bench Priming Tool gets the job done fast. The tool includes a new folding tray with built-in primer-flipping feature that allows direct filling from common primer boxes. The tool mounting holes are spaced for the Lee Bench Plate system (#006-90251) or the device can be mounted directly to your workbench. REVIEWS by verified purchasers.
If you shoot long range, you need a scope level. This Discovery scope level is fully CNC-machined to close tolerances for a good fit. It is available with inner diameters to fit scopes with either 1″ or 30mm main tubes. The 1″ version is just $12.99 while the 30mm model is $13.95. You could easily pay $35.00 or more for a 30mm scope level. Purchasers have praised this product: 89% of verified buyers rated this five stars.
9. Bullets.com — Handgun Safe, $49.95
This pistol safe keeps your handguns secure while still permitting instant “push-button” access. The three-button lock can be personalized with 3- to 8-digit codes, and there is a key override. This safe will hold two (2) full-sized pistols and can also store passports, cash, or other valuables. The spring-loaded door gives you near-instant response. The all-steel case also includes mounting holes for fixing the safe to floor or shelf.
We use 1″-diameter Target Spots for sight-in and practice at 100-300 yards. These bright red/orange self-adhesive dots are easy to see. At 100 yards the high-contrast black diamond centers provide precise aiming points. We found this 10-pack of target spots on Amazon at a rock-bottom price. You get 630 total stick-on dots for just $9.65 with FREE Shipping. You can also get 360 Birchwood Casey 1″ dots from Midsouth for just $3.15, but shipping is extra. If you’re already ordering something from Midsouth, you may want to add the dots to your order.
In recent months, Creedmoor Sports has expanded its selection of reloading tools and gear, under the guidance of Bill Gravatt, former President of Sinclair International. And Creedmoor recently launched the Creedmoor InfoZone, an online source for Shooting News, Reloading Tips, Gear Reviews and basic gunsmithing information. Visit CreedmoorInfoZone.com.
Bill Gravatt is an expert on reloading processes and gear. He developed many of the popular tools marketed by Sinclair Int’l, and now he’s lending that expertise to Creedmoor Sports. Bill is hosting a series of “how-to” videos produced for the Creedmoor InfoZone.
Here Creedmoor’s Bill Gravatt demonstrates several methods to clean your cases. Bill tells us: “Powder residue should be removed before you insert your cases into your reloading dies. There are several ways to clean your cases. Many shooters use a combination of various methods…”
1. Manual Cleaning — You can use 0000 Steel wool for the outside of the case and a Case Neck brush for the inside. A paper towel can remove any remaining residue. This is a handy way to clean if you load at the range.
2. Vibratory Tumbling — This traditional method works well, particularly for pistol brass. Experiment with both Corn Cob and Walnut media. You can get a brighter shine by putting a small amount of liquid brass polish in the media.
3. Wet Tumbling with Stainless Media — This process can get your brass clean inside and out. Do check to ensure no pins are stuck in the flash-holes. Watch for peening of case mouths that can occur over time.
4. Ultrasonic Cleaning — Ultrasonic cleaning works great for small parts as well as brass. The ultrasonic process removes all carbon and traces of lube, which can leave the inside of case necks too dry. To smooth bullet seating, try putting a tablespoon of Ballistol in the cleaning solution.
Cleaning Reloading Dies
Cleaning your reloading dies is something that many hand-loaders neglect. In this 60-second Tech Tip, Bill Gravatt provides some smart advice on cleaning your dies. Bill notes: “After heavy use, case lube and carbon can build up in your reloading dies. It’s important to keep them clean. Also, with new dies, give them a good cleaning before first use, because they ship with a corrosion inhibitor.”
1. Step 1 — Prior to cleaning, disassemble the die and spray it with a good degreaser. Do this with brand new dies too.
2. Step 2 – Take a patch and run it in the die to remove old lube and gunk. Don’t forget the decapping assembly and other internal parts.
3. Step 3 — After cleaning the die, but before reassembly, spray the die with a good corrosion inhibitor, such as Corrosion-X or Starrett M1.
Here’s a smart product for folks who load and store large quantities of ammunition. With these white cardboard ammo boxes from Repackbox.com, you can store pistol, rifle, and shotshell ammo very inexpensively. A set of 30 boxes costs $13.95 ($0.47/box), while a 100-Box Bundle costs just $22.95. That works out to just $0.23 (twenty-three cents) per box — very cheap!
All boxes are Made in the USA of .024 thick, acid free, virgin card stock. The boxes are printed with Cartridge Type (Caliber), number of rounds enclosed, and an outlined box where a printed label can be placed. Included with each set are Blank Avery 5167 Labels which can be printed with load/bullet data or other info. The box kits even come with white gloves to keep your ammo grease-free. Order these ammo repack box kits from Repackbox.com.
There are many advantages to these cardboard boxes. They are inexpensive and they store ammo very efficiently, not using much space. You can arrange them in any orientation (unlike some plastic ammo carriers). We like these boxes for varmint safaris and other adventures when we’re transporting many hundreds of rounds of ammo. They are also a smart choice for bulk shotshell ammo, as they are much less expensive than plastic shotshell cases. For pistol shooting we still like see-through, plastic flip-top boxes at the range, but these white cardboard boxes are great for storing large quantities of pistol ammo produced on progressive presses. NOTE: These boxes do NOT have individual dividers between the cartridges. And no, the boxes are NOT waterproof — you’ll want to keep them in an ammo can on rainy days.
30-Box and 100-Box Kits are available for all these Pistol and Rifle Cartridge Types:
PISTOL Cartridges
.380 ACP
.38 SPL/.357 Magnum
9mm Luger
.40 S&W
10mm
.44 Magnum
.45 ACP
.45 Long Colt
RIFLE Cartridges
.223 Rem/5.56×45
.30 Carbine
30-30 Winchester
.303 Brit
7.62×39
.308 Win/7.62×51
7.62x54R
.30-06 Springfield
In addition, there are boxes for 12 gauge shotgun ammunition.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. CDNN Sports — Ruger 17 HMR American Compact, $249.99
With ballistics far superior to a .22 LR, the 17 HMR is ideal for prairie dogs and small varmints out to 180 yards or so. Now you can get a reliable, name brand 17 HMR rifle for a very attractive price. That’s right, CDNN Sports is selling the 17 HMR Ruger American Rimfire Compact, with 18″ barrel, for just $249.99. That includes two (2) comb units and a FREE padded carry sling. FFL required.
2. Monmouth Reloading — Nosler RDF Bullets, $28-$29 per 100
Nosler’s line of RDF (Reduced Drag Factor) bullets have high BCs for their weight. Precision shooters are reporting outstanding accuracy. Given their high performance and consistency, RDF bullets represent a superior value. At Monmouth Reloading you can get Nosler RDFs for under $29 per 100 for popular 6mm, 6.5 mm, and .30-Cal sizes. That’s up to $20 less per box than some premium brands.
3. Grafs.com — Hornady Auto Charge, $179.99 + Free Range Bag
Here’s an excellent promo from our friends at Grafs.com. Hornady’s versatile Lock-N-Load Auto Charge™ Powder Scale and Dispenser is on sale for $179.99. And now for a limited time you get a FREE deluxe range bag ($43.99 value) with the purchase of the Hornady Scale/Dispenser. This is a good unit with a nice keypad. NOTE: You can also get the FREE Range Bag when you buy the Hornady Case Prep Center at Grafs.com for $419.99. That’s pretty pricey — getting Scale/Dispenser with the Range Bag is the better deal.
4. Natchez — Special 5 Reloading Press Kit, $199.99
Looking for a great holiday gift for a family member getting started in metallic cartridge reloading? This RCBS Kit has everything a new reloader needs: single-stage press, powder measure, scale, powder trickler, priming tool, cartridge tray, “rocket” chamfer tool, case lube and more. This is an excellent entry-level reloading kit, on sale for just $199.99 at Natchez Shooters Supplies. We like the relatively compact Special 5 press for most reloading duties. Eventually you may want to add an additional, large heavy press, but this will get the job done. For the combined package, with all the tools one needs to hand-load quality ammo — this is a stunningly good deal at $199.99.
This Master Tumbler Kit contains everything you need to tumble rifle or pistol brass. Now on sale for $56.07 with free Prime shipping, this Kit contains: Vibratory Tumbler, Rotary Media Separator, Plastic Bucket, 3 lbs. Cleaning Media, and 4 oz. Brass Polish. NOTE: We considered this an excellent deal when it was priced at $67.99. At $56.07 it is a total steal — you could easily pay that much for a decent vibratory tumbler alone.
Check out the Harbor Freight Welding Cart, item #65939. This cart is ON SALE right now for just $54.99. With a few bungee cords (and some creativity), the cart can be adapted pretty easily to hauling your gun gear. If you want to enhance the basic cart, it’s easy to add plastic side-panels on the bottom unit, and fit a barrel-holding system on the cross-tube.Overall size is 29-1/2″ L x 20″ W x 49″ H, and width between side rails is 18″. The wheels (with tires) are 20 3/4″ in diameter for smooth rolling. Consider that, if you made your own cart from scratch you could easily pay $30.00 or more just for the large-diameter wheels and axle. Do note — this cart has air-filled tires. Be sure to inflate before you go to the Range!
7. Amazon — Neiko Digital Calipers, $16.79
Even if you have a good set of calipers, you may want to get one of these Neiko 01407A Digital Calipers. The #1 best-selling digital caliper on Amazon.com, this Neiko tool features a large LCD Screen and measures up to 6.0 inches. With 2850+ customer reviews, this product has earned an overall rating of 4.4 out of 5 stars. It’s hard to go wrong for $16.79, even if you just use these as a spare set for measuring group sizes and case trim lengths.
8. Lyman — $25.00 Off Top-Selling Products
You can now get $25.00 Off five of Lyman’s top-selling products: BoreCam, Case Prep Xpress, Gen6 Powder Dispenser, Cyclone Rotary Tumbler, and AutoAdvance Target. With Lyman’s Summer Mail-In Rebate Program, you can earn a $25 rebate per select item bought from any Lyman dealer, online or direct from the Lyman website. Items must be purchased between June 9 and August 31, 2017 to qualify. CLICK HERE for the Rebate Redemption Form.
9. Amazon — Leight MAX NRR33 Earplugs, $7.45 for 50 Pairs.
These Howard Leight NRR33 Max plugs are your Editor’s favorite foam earplugs. They seal out noise better than any others I’ve tried. Between shooting, motorcycling and mowing lawns, I probably have Max plugs in my ears 2-3 days a week. This is a very good price for a bulk pack of 50 pairs (100 plugs). And if you act soon, you can get free shipping to boot.
In our Shooters’ Forum a reader recently asked: “How much neck tension should I use?” This prompted a Forum discussion in which other Forum members recommended a specific number based on their experience, such as .001″, .002″, or .003″. These numbers, as commonly used, correspond to the difference between case-neck OD after sizing and the neck OD of a loaded round, with bullet in place. In other words, the numbers refer to the nominal amount of interference fit (after sizing).
Neck-Wall Thickness is Important Too
A stuck case is one of the boo-boos that all of us reloaders have faced from time to time. If proper lubrication is applied, then it should not be a problem. No matter if you are a seasoned reloader or new to it, this situation can happen. Take your time, use the proper procedures, and you will be back in business in no time! This article explains how to avoid stuck cases (through proper lubrication) and how to use a stuck case removal system.
Grab a 
