The Remington-Bushmaster 2012 Long Range Regional Championship was held at Reade Range in Fallen Timbers, Pennsylvania on June 1, 2, and 3. We had a great turn out of over 60 shooters. Half of these shooters showed up on Friday to participate in the practice and team match. The weather had other plans for the shooters though and the second half of the team match was rained out.
Saturday started off sunny, but cool and windy, with 62 shooters registering in Sling (43), F-TR (7) and F-Open (12). Pit service was provided by the Boy Scouts, and had a rocky start. With the help of some shooter volunteers, pit operations smoothed out throughout the day and the first three 1000-yard Matches ran without incident. The wind pretty much held a steady 2 MOA left throughout the day, and some high scores were fired.
After the Saturday matches were finished and daily scores posted, Bryan Litz conducted a wind clinic, and then the Reade Range Staff provided a wonderful meal of ca-bobs, salads, fresh fruit and beverages. Then came the prize raffle. Over 50 prizes were raffled off, including a Vortex Spotting Scope, gift certificates, and other merchandise items worth over $6000.
Sunday morning started off overcast and the same wind as the day before. Conditions remained constant and the pits ran smoother than ever with more volunteers helping the scout troops. Rain was forecasted to start at 3:00 pm so the shooters were eager to move through the matches and beat the rain. Mission accomplished, as a cease fire was called just before 3:00 pm, ending the last match. Scores were quickly figured and awards were promptly given. Bryan Litz, of Applied Ballistics LLC, announced the winners of each individual match, Tom Ferraro announced the aggregate match winners, and finally Ken Roxburgh presented the winners with guns on behalf of Remington-Bushmaster. The rain showed up as the final name was announced.
Bryan Litz remarked: “We would like to thank everyone who participated in this match and all of those who helped make it a great weekend. We are looking forward to seeing everyone again next year!”
Final Scores:
Sling Class
F-TR
F-Open
1st: Bryan Litz 1194-70
1st: James Crofts 1141-27
1st: Don Nagel 1172-41
2nd: Trevor Hengehold 1190-65
2nd: Brad Sauve 1134-25
2nd: Bob Woodward 1169-49
3rd: Jon Howell 1188-60
3rd: William Litz 1122-19
3rd: Jim Murphy 1159-38
Gun Winners by Gun Class:
High Palma: Bill Bowers 1180-43
Any/Iron: Bryan Litz 598-36
Any/Any: Jon Howell (pictured) 597-35
Jr. Any/Iron: Tommy Ferraro 557-12
Jr. Any/Any: Joe Hendricks Jr. 571-14
High Grand Senior: David Brantner 1164-42
High Senior: Gerry Sanders 1179-47
High F-TR: James Crofts 1141-27
High F-Open: Don Nagel 1172-41
Here’s good news for .221 Fireball and 20 Vartarg Fans — within the next five to eight weeks, Nosler-brand .221 Fireball brass will hit the market. We just got off the phone with Nosler, whose representatives confirmed that Nosler will be selling 100-ct boxes of .221 Rem Fireball brass very soon (item #10078). Product is expected to start shipping “in a month or two”. Nosler’s .221 Fireball brass is crafted by a third-party supplier, and then final-finished by Nosler at its Bend, Oregon factory.
We tried to find out the name of the third-party source without success. However, Nosler did confirm that this brass “is definitely NOT made by Remington“.
Expected retail for the Nosler .221 Fireball brass is $60.00 to $80.00. Online retailer Precision Reloading currently has the Nosler-brand .221 Fireball brass on order, with a stated retail price of $69.39 for a 100-ct box, product # NS10078. You’ll find the Nosler .221 Fireball brass on the Precision Reloading website, but it is currently listed as “out of stock”. Check back in a few weeks to see if the Nosler .221 Fireball brass has started shipping yet. NOTE: In addition to the new .221 Fireball offering, Nosler has announced that it will sell brass in three other new calibers: 17 Remington, .222 Rem, and 270 WSM.
As soon as its new .221 Fireball brass becomes available, Nosler has promised to send us samples. We want to see how the Nosler brass compares to Remington-brand .221 Fireball brass — currently the only type on dealers’ shelves. With Nosler’s reputation for quality, we hope the Nosler .221 Fireball brass will be a step up from Remington’s product. The Remington brass does the job but case weights and neckwall thicknesses are not particularly uniform, and the Rem brass is fairly soft.
George Kollitides has been appointed acting Chief Executive Officer and Executive Chairman of the Board for Freedom Group, Inc. (FGI). Kollitides, a hunter, shooter and firearms enthusiast, sits on three NRA Committees, is a trustee of the NRA Foundation and is a director of the New York State Rifle & Pistol Association. He is a past director of the Safari Club International Connecticut Chapter. Kollitides was previously a managing director of Cerberus Capital Management, where he was the architect of FGI and its lead director. Kollitides stated, “I am ecstatic to join the FGI team, where we have the greatest employees and a 200-year history of 100% American-made [products].”
In an interview with John Zent, editorial director for NRA Publications, Kollitides was asked how the Freedom Group can support hunting, the shooting sports, and gun-owners’ rights. Kollitides answered: “Our job is to build the best products possible, provide good manufacturing jobs for Americans and represent our investors’ best interests. If our efforts succeed in growing our user groups, shooters, hunters, the military and law enforcement, they will have a much louder voice in public policy. The key for us is to strengthen our industry and strengthen our users, customers, and partners. Doing that by making relevant, quality product, along with education and access, we think, is the right way to go about it, and so we are working with state and local governments, not-for-profit hunting and shooting organizations, and, of course, the NRA.”
There was a lot of buzz at the Defiance Machine booth at SHOT Show. The new Defiance actions are beautifully made, and they have already been used in some impressive custom rifle builds. Defiance, based in Columbia Falls, MT, has rolled out a line-up of four (4) custom actions: Rebel, Mutant (for tubeguns), Renegade (for .408 CheyTac), and Titan (for 50 BMG). These actions all feature beautiful machining, with Wire EDM-cut lug ways, advanced-design extractors, and a true one-piece bolt. All action materials are pre-hardened before machining to prevent changing tolerances during heat-treating. Southpaws will be happy that both right and left-hand versions of all four actions are offered.
The Rebel actions feature a Remington 700 footprint for ease of inletting and stock compatibility. Notably, the Rebel actions are available in four lengths. Buyers can choose Medium, X-Medium, Long, or X-Long lengths to accommodate all popular factory chamberings and extended-length handloads. Multiple magazine well cuts are available for all of today’s popular magazine types including hinged floorplates, DBMs, or single-shot. For a rock-solid optics installation, Defiance can supply Mil-spec Picatinny rails with various built-in MOA geometry. This stout rail is secured to the action with five pins and 1/4-28 X 1/2″ screws. Base price on a Rebel is $1270.00 (Medium) or $1300.00 (Long), with many available extra-cost options. Defiance says delivery will take at least 60 days from order date.
We were very intrigued by the Mutant action with its integrated recoil lug. Offered in Medium and Long action lengths, Defiance’s new Mutant receiver is made specifically for the Eliseo RTM and RTS Chassis Systems. The Mutant features an extended tenon length for increased barrel thread contact and bedding surface. (Extended tenon is optional on the Rebel). The Mutant’s integral recoil lug adds rigidity and simplifies tubegun assembly. Medium-action Mutants are typically built with a Guardian mag-well cut to accommodate AI and AW magazines, while Long-action Mutants fit AI single-stack magazines and can be of Badger length or the longer CIP length for extended-OAL cartridge loading. The starting price on a Mutant action is $1200.00 (before options), and delivery is at least 60 days out.
The beefy Titan (50 BMG) and Renegade (.408 CheyTac) actions look like they will become very popular with the big-caliber shooters. These jumbo actions share the advanced features of their smaller cousins, but they are sized up significantly to provide additional strength, stiffness, and bedding surface. On both big actions double-plunger ejectors are used in combination with M16 extractors for reliable case ejection. Both Titan and Renegade actions are offered either as a single-shot or repeater. The Titan is currently sold exclusively through Proof Research, while the Renegade is not yet in production. Defiance plans to build 600 Renegade actions later this year, after demand is filled for the Rebels and Mutants. The anticipated price for the Renegade is $1750.00.
OK, we suspect we’ve whet your appetite. For final pricing (with customer-ordered options) and availability call Defiance at (406) 756-2727. For specs, features, and lots more photos, visit DefianceMachine.com. Contact Proof Research, 406-756-9290, with order questions about the 50 BMG Titan action.
Remington once again showcased a “civilian” production version of the Remington Arms Chassis System (RACS), first shown at the 2011 SHOT Show. The full-adjustable, modular RACS are designed as drop-in upgrades for any Rem 700 action. A Rem 700 action is clamped directly (metal on metal) to the center section of the RACS, which has a V-block type profile and central magazine well. There are both short-action and long-action versions of RACS. These look nearly identical in design, other than the length of the action section (see photos below by EdLongrange.)
The RACS features a folding stock, with adjustable cheekpiece, LOP, and buttplate height/cant/cast-off. This stock will accept AI magazines which also come with the kit.
No Release Date or Price Yet
What we still don’t have is a firm price and a date when RACS will actually be released to vendors. This system attracted much attention when first introduced, and it appears Remington has made evolutionary upgrades, but right now Remington is still not disclosing a final prices or a reliable delivery date. So keep your figures crossed, but don’t get too excited. Rem’s RACS may remain “vaporware” for an extended time.
Manners Composite Stocks has released a new series of folding tactical stocks, the MCS-TF (Tactical Folder) series. There are four TF versions: TF1 through TF4. These offer different fore-end and buttstock options, but share the same folding mechanism and hardware.
Tom Manners explains the new folding design: “The goal of this project was to create a lightweight, super strong folder stock, with a rock-solid hinge lock-up. We feel that we have got pretty close to that. The weights of the completed stocks are running from 4.5 to 4.8 pounds. If you run a mini chassis this will bring them up to about 4.9 to 5.3 pounds.”
Much work went in to the hinge design, which has been in development for more than a year: “We have created a simpler, lighter weight hinge, with … rock solid lock-up. The hinge is a combination of high strength chrome-moly steel and aluminum, which has been parkerized or hardcoated. It is manufactured by Badger Ordnance exclusively for us. The hinge itself is molded and cast into the stock shell. This means the shell wraps around the hinge, with no screws or attachment systems to become loose. The hinge design itself is very simple and basic; once closed, the back portion of the hinge wraps around and locks-up the front portion of the hinge to create a very solid system. To open [the hinge] all that is needed is a push on the checkered button on the left side of the stock.”
The Manners TF Series also locks back in the folded position, using a positive-locking steel pin. Tom explains: “In the butt, there is a push button on the right side behind the cheek, when it is depressed; it extends the locking mechanism out the left side of the stock. It is just a simple push of the button to close the system. Once closed, the button sits about .250” below the surface of the stock so that it can not be accidentally depressed. To open all you need to do is give it another push.”
Stock Specs and Options
All Manners TF-Series stocks will come standard with an adjustable cheek, full inlet, 1” Pachmayer Decelerator pad, and action pillars. These stocks will be offered with molded-in camo finishes or molded-in solid colors, with a textured surface in key areas. Available inlets include: All Rem-based actions, Winchester Model 70, Savage (and a few others — check website for details). These new TF series stocks will be on display at SHOT Show 2012 in Las Vegas. For more info, visit MannersStocks.com or call Tom Manners at (816) 283-3334.
Product Tip from EdLongrange. We welcome reader submissions.
Stiller Precision Firearms is now offering hard-anodized, billet aluminum bottom metal systems that work with Accuracy International (AI) magazines in Rem-style actions. Currently a short-action version is offered (for both .223 Rem and .308 Win cartridge sizes) and a long-action unit is in the works. Bottom metal for the .223 Rem fits a 10-round magazine. For the .308 Win, there are three mag options: 5-round centerfeed, 10-round centerfeed, and a 10-round, .308 double-column mag. The double-column magazines won’t work in the standard Remington action, but are perfectly suited for dedicated actions such as Stiller’s new TAC30 A/W. Current MSRP for Stiller’s DBM Bottom Metal is $295.00 with one (1) 5-round magazine.
Jerry Stiller consulted many tactical shooters before finalized the design of his new bottom metal. It contains many smart features that enhance reliability/function and simplify the installation process:
Strong, billet aluminum construction with Mil-Spec Type 3 hard anodizing.
Flared magwell allows fast, positive insertion of Accuracy International magazines.
Computer-optimized truss pattern reduces weight while retaining strength and stiffness.
Works with all commonly-available triggers for Rem and Rem-clone actions.
“Exact-Fit” pillars and screws included to ensure a perfect fit and easy installation.
NO SPECIAL INLET is required on the tang ends. Stiller Bottom Metal will fit into a standard BDL bottom inlet in most stocks (must meet Remington specified depths). The only cutting needed is around the magazine box. Stiller has beefed up the material in this area so that a high-precision cut is not needed.
Story tip by EdLongrange. We welcome reader submissions.
Remington now offers a Custom Molded Hearing Protection Kit. This kit, developed by Radians for Remington, allows shooters to form their own re-usable earplugs, using non-toxic, hypo-allergenic silicone. Following instructions, in just a few minutes, you can custom-mold NRR 26 earplugs that fit the exact contours of your ears. If you get the molding right, the plugs stay in place and can be worn for all-day sessions without discomfort. Remington claims that this kit can provide: “the most comfortable, cost-effective, customizable hearing protection on the market”.
Included in the kit, which retails for $19.99, is a lanyard cord with colored, screw ends which will fit securely in the earplugs. Also included is a mirror to aid in the molding process and a small, microfiber storage bag.
Comment: We’ve used a similar kit from Radians, and the two-part silicone molded easily. Following instructions, the silicone cured in about an hour, and the plugs were comfortable. Some buyers have complained that the plugs never “set-up” or cured properly. We suspect those buyers did not mix the two-part putty properly (in equal portions) so that the material never stabilized. It’s really not that difficult to get it right. We suggest mixing all the materials together, very thoroughly, in one batch. Then divide the mixed compound into two equal blocks, forming one plug for each ear.
Is this kit worth buying? We prefer and recommend tapered foam plugs. When purchased in bulk, foamies cost pennies a pair, and they offer superior noise reduction ratings of NRR 30-33. However, for a variety of reasons, some folks can’t tolerate foam earplugs or find them difficult to insert. If you’re among those who don’t like to use foam plugs, this do-it-yourself kit is worth a try. Follow the instructions, mix the compounds thoroughly, and you can craft customized ear protection for a fraction of the cost of doctor-fitted custom-molded plugs.
You will find many purchaser reviews of this product on Amazon.com. Buyers seem divided. Most had very good results. Some folks were disappointed. As noted above, our experience was positive. For more information, contact Radians at 7580 Bartlett Corporate Drive, Bartlett, TN, 38133. Call toll free 1-877-723-4267 or visit www.radians.com.
The NRA Institute for Legislative Action (ILA) has issued a statement regarding the internet rumors that George Soros in some way controls Cerberus Capital Management, or the Freedom Group of companies. As we have stated in the Daily Bulletin, Soros has no connection to the Freedom Group or Cerberus Capital Management (a holding company that owns the Freedom Group). Claims that Soros is involved in Cerberus or the Freedom Group are 100% false. Here is the NRA ILA statement first issued on October 14, 2011:
From the NRA ILA:
Recently, an old rumor regarding Cerberus–the private equity firm that owns Freedom group, a holding company that in turn owns a number of firearms manufacturers, including Remington, Marlin, Bushmaster, and DPMS–was in some way tied to George Soros.
This rumor is completely false and baseless.
NRA has had contact with officials from Cerberus and Freedom Group for some time. The owners and investors involved are strong supporters of the Second Amendment and are avid hunters and shooters. In reality, at no time has George Soros ever been a part of the ownership group of Freedom Group or Cerberus, and as a privately-traded corporation, there is no possibility that he will be in the future.
This unsubstantiated rumor has caused a great deal of unnecessary concern for gun owners. NRA-ILA urges our members to take great care before repeating baseless rumors[.]
An old rumor has once again resurfaced alleging that Cerberus–the private equity firm that owns Freedom group, a holding company that in turn owns a number of firearms manufacturers, including Remington, Marlin, Bushmaster, and DPMS–is in some way tied to George Soros.
This rumor is completely false and baseless.
Following is a statement from Freedom Group, Inc., addressing the rumor:
Despite rumors to the contrary, Cerberus Capital Management, L.P., the firm which owns Freedom Group. Inc. (FGI), the holding company for such firearms manufacturers as Remington, Marlin, Bushmaster and DPMS, is in NO WAY affiliated with anti-gun activist George Soros.
George Soros has never been a part of Freedom Group or Cerberus. Further, as Cerberus is a privately owned corporation, run by sportsmen, shooters and firearms enthusiasts, we can say with great sincerity and certainty that George Soros will never be a part of the Freedom Group family of companies.
“If anyone should know whether George Soros is affiliated with either Freedom Group or Cerberus, it’s me,” said George Kollitides, Executive Chairman and Chief Executive Officer of FGI. “I spent the last eleven years of my career at Cerberus and just recently stepped down to become executive chairman and chief executive officer of FGI. I did this in order to devote 100 percent of my time, effort and passion to a company I spent years building. I can emphatically proclaim, without the slightest of doubt, that George Soros has never, does not and never will own or be affiliated with Cerberus or Freedom Group.”
Team Remington/Bushmaster shooters will be conducting a free shooting clinic in conjunction with Western CMP Games and Creedmoor Cup Matches held at Ben Avery Shooting Facility outside Phoenix, Arizona. The clinic will be held at the Activity Center on Wednesday, October 19, 2011. The clinic commences bright and early, at 7:30 am, kicking off the Creedmoor Cup phase of events (Oct. 19-23). CLICK HERE for Western CMP Games Program and Schedule (PDF).
What the High Power Clinic Will Cover
The free shooting clinic will be conducted by team coach Ken Roxburgh, and Team Remington/Bushmaster members. The clinic will offer formal classroom instruction, practical application, dry and live fire training, and demonstrations by some of the world’s leading high power service rifle and match rifle competitors. Clinic Topics will include:
Fundamentals of High Power Shooting
Positions — Standing, Sitting, Prone
Trigger Control and Aiming
Courses of Fire
Effects of Weather
Wind Reading
Weapon handling and safety
Competition Data book
Range Etiquette
Rifle Care and Cleaning
Assembly/disassembly of Match Guns
How to Sign Up for the FREE High Power Clinic
Interested shooters can register for the Team Remington/Bushmaster High Power Rifle Shooting Clinic at the CMP website. There you can learn more about the clinic and download the Registration Form. Participants are encouraged to bring their shooting equipment and rifles; ammunition is not required for the course. To prepare you may want to read our article on the Basics of High Power Competition.
If you’re interested in watching a real pro shooting Service Rifle, here’s former National Champion (now Creedmoor Sports G.M.) Dennis Demille, shooting 300-yard Rapids from the prone position position. This was filmed at last year’s Southwest Nationals. You’ll see him adjusts his sights while looking through the spotter. Then watch how calm and steady Dennis stays from shot to shot. That comes with years of practice and training.
How about a bolt gun? This next, high-def video was taken by our friend Jonathan Ocab a competitive shooter and talented photographer from Southern California. It shows Dennis Demille shooting the 200-yard Rapids (sitting position) with a Tube 2000 bolt-action gun. Notice the quick reload after he empties his first magazine.
Editor’s Note: Both Remington and Bushmaster are Freedom Group Companies. The Freedom Group is owned by Cerberus Capital Management, a private holding company. Now, please read carefully, because there is much mis-information floating around the internet currently. Georges Soros, either individually or as part of an investment group, does NOT own or control Cerberus. Repeat George Soros does NOT own or control Cerberus. Nor does he (or his investment companies) own or control any of the Freedom Group of companies. Got that?
Saturday started off sunny, but cool and windy, with 62 shooters registering in Sling (43), F-TR (7) and F-Open (12). Pit service was provided by the Boy Scouts, and had a rocky start. With the help of some shooter volunteers, pit operations smoothed out throughout the day and the first three 1000-yard Matches ran without incident. The wind pretty much held a steady 2 MOA left throughout the day, and some high scores were fired.
Here’s good news for .221 Fireball and 20 Vartarg Fans — within the next five to eight weeks, Nosler-brand .221 Fireball brass will hit the market. We just got off the phone with 
Expected retail for the Nosler .221 Fireball brass is $60.00 to $80.00. Online retailer 
Remington now offers a 
The 
