Team Remington/Bushmaster shooters will be conducting a free shooting clinic in conjunction with Western CMP Games and Creedmoor Cup Matches held at Ben Avery Shooting Facility outside Phoenix, Arizona. The clinic will be held at the Activity Center on Wednesday, October 19, 2011. The clinic commences bright and early, at 7:30 am, kicking off the Creedmoor Cup phase of events (Oct. 19-23). CLICK HERE for Western CMP Games Program and Schedule (PDF).
What the High Power Clinic Will Cover
The free shooting clinic will be conducted by team coach Ken Roxburgh, and Team Remington/Bushmaster members. The clinic will offer formal classroom instruction, practical application, dry and live fire training, and demonstrations by some of the world’s leading high power service rifle and match rifle competitors. Clinic Topics will include:
Fundamentals of High Power Shooting
Positions — Standing, Sitting, Prone
Trigger Control and Aiming
Courses of Fire
Effects of Weather
Wind Reading
Weapon handling and safety
Competition Data book
Range Etiquette
Rifle Care and Cleaning
Assembly/disassembly of Match Guns
How to Sign Up for the FREE High Power Clinic
Interested shooters can register for the Team Remington/Bushmaster High Power Rifle Shooting Clinic at the CMP website. There you can learn more about the clinic and download the Registration Form. Participants are encouraged to bring their shooting equipment and rifles; ammunition is not required for the course. To prepare you may want to read our article on the Basics of High Power Competition.
If you’re interested in watching a real pro shooting Service Rifle, here’s former National Champion (now Creedmoor Sports G.M.) Dennis Demille, shooting 300-yard Rapids from the prone position position. This was filmed at last year’s Southwest Nationals. You’ll see him adjusts his sights while looking through the spotter. Then watch how calm and steady Dennis stays from shot to shot. That comes with years of practice and training.
How about a bolt gun? This next, high-def video was taken by our friend Jonathan Ocab a competitive shooter and talented photographer from Southern California. It shows Dennis Demille shooting the 200-yard Rapids (sitting position) with a Tube 2000 bolt-action gun. Notice the quick reload after he empties his first magazine.
Editor’s Note: Both Remington and Bushmaster are Freedom Group Companies. The Freedom Group is owned by Cerberus Capital Management, a private holding company. Now, please read carefully, because there is much mis-information floating around the internet currently. Georges Soros, either individually or as part of an investment group, does NOT own or control Cerberus. Repeat George Soros does NOT own or control Cerberus. Nor does he (or his investment companies) own or control any of the Freedom Group of companies. Got that?
Are there significant metallurgical differences in the alloys used in various brands of cartridge brass? The answer is yes, and we have proof. Using a state-of-the-art X-Ray Fluorescence Spectrometer, some tech-savy Wisconsin shooters recently analyzed the alloys in seven different types of cartridge brass.
The test results revealed significant differences in the percentages of copper and zinc in the different brands. Copper content ranged from a low of 72% by mass (Winchester, S&B) to a high of 80% by mass (Remington). Zinc, which adds hardness to the alloy, ranged from a low of 20% by mass (Federal) to a high of 36% (‘brown box’ Lapua). Interestingly, the tests, as reported by Forum Member Fred Bohl, revealed that the alloy in the new ‘blue box’ 6mmBR Lapua brass is different than the alloy in Lapua’s older ‘brown box’ 6mmBR brass. Specifically, the ‘blue box’ 6mmBR brass has more copper and less tin (by mass). Here’s a summary of the X-Ray Fluorescence spectrometry tests:
This testing was done at major science laboratory, using high-grade X-Ray Spectrometry Analyzing equipment. Fred reports that: “The data was run by one of the club members with the permission of the test lab supervisor who is also a club member and shooter. The data in original output reports was far more detailed about trace elements at lower orders of magnitude primarily from surface contaminants (some were rerun after establishing a repeatable cleaning procedure)”. The testing process is discussed in this Shooters’ Forum thread.
We do NOT have the metallurgical expertise to infer that any particular alloy shown above is “better” than another. The alloy “blend” is merely one of many variables that can have an impact on the performance and quality of the finished product. Annealing times/methods differ and some cartridge brass is extruded while other cartridge brass is made with the traditional drawing process. Readers should not presume, on reading the above chart, that they can identify the “best shooting” brass simply based on the constituent metals in the various alloys.
General Observations about Cartridge Brass Alloys
With the cartridge brass X-Ray Spectrometry results in hand, Fred Bohl hoped to find out what “real world” conclusions (if any) we could draw from the raw data. Fred sent the test results to some knowledgeable metallurgists, soliciting their comments. Fred explains: “When I first posted this information [in the Shooters’ Forum], I had hoped to elicit replies from expert metallurgists and to initiate a useful discussion. From [their replies] I distilled the following ‘consensus’ comments”:
1. The range of Copper/Zinc ratios suitable for use in cartridge making by typical processes is 85/15 to 65/35 (% by weight or mass).
2. The range of Copper/Zinc ratios suitable for use in cartridges intended for reloading is 80/20 to 70/30. Above 80% copper, the resulting case would tend to be too soft and difficult to attain the distribution of hardness desired (harder at the base and softer at the neck). Below 70% copper the resulting case would tend to be too hard, would work harden too quickly and require frequent annealing. [Editor: That said, the ‘brown box’ 6mmBR Lapua brass, with 62% copper/36% zinc content, enjoys an unrivaled reputation for both accuracy and its ability to perform well after a dozen or more reloading cycles. We know 30BR shooters who have shot the same old-style Lapua brass (6mmBR parent case) more than 50 times. So maybe the “expert” view needs re-thinking.]
3. As the percentage of zinc increases, the tensile strength, yield strength and hardness tend to increase. However, above 35% zinc, while tensile strength will continue to tend to increase, both yield strength and hardness will tend to begin to decrease.
4. The trace additives of iron and/or silicon are used to control the processing characteristics of the alloy. Trace additions of chromium will improve corrosion resistance and give a shinier surface (both largely cosmetic).
5. Selection of the alloy and additives is a trade off among: end use desired properties; processing time and yield; and cost of materials. For example, the classic 70/30 cartridge brass was considered an optimum combination of corrosion resistance and hardness for single use by the military with good process yield at acceptable material cost.
6. All of my responding experts were surprised by the brown box Lapua alloy except for the oldest. He remembered using an almost identical alloy late in WWII when copper was in very short supply for military small arms ammunition.
Remington and Carl Zeiss Sports Optics have partnered on a promo that can save you $150.00. Starting August 1, 2011, if you purchase a Remington 700 rifle (most models) and a Zeiss Conquest or Victory riflescope, you’ll qualify for a $150.00 rebate. This promo runs through Dec. 31, 2011.
Qualifying Rifles and Scopes
Customers who purchase any Remington Model 700 BDL, CDL, CDL SF, XCR, XCR II or XHR® and any ZEISS Conquest or Victory riflescope (except ZEISS Conquest 3-9×40 # 20 reticle), from authorized Remington and Zeiss dealers in the U.S.A. between August 1 and December 31, 2011 qualify for the rebate. To get the money, customers must fill out a rebate form, and mail it in along with both original sales receipts and proofs of purchase to receive a $150 American Express gift card. All Ultimate Combination rebates must be postmarked by January 14, 2012 and cannot be combined with other rebate promotions. (Note: We’ve posted the correct link to Remington’s rebate page, but Remington hasn’t published the Rem/Zeiss rebate form yet — it should be up in a week or so.)
Among Remington rifles, Custom Shop products have long enjoyed a solid reputation, though the quality control has declined in recent years. Remington is looking to return its Custom division to the glory days. As part of that effort, Remington has produced a dedicated Custom Shop website: www.remingtoncustom.com. On the Remington Custom Shop website visitors can browse through series of highly-specialized rifles and shotguns: Hunter Series, Target/Tactical, Historical, Rimfire, 40-X™ Series and High Grade. Within each series, the user can click on a specific model for an overview, features, specifications and images of the selected firearm of interest. The Custom Shop Showcase features high-quality photos illustrating the hand craftsmanship that goes into premium Custom shop arms.
OK, you .260 Rem shooters, break out your credit cards. The Lapua .260 Remington cartridge brass has finally arrived. Kevin Thomas of Lapua tells us: “Sorry for the wait guys, but it’s here. Grafs.com has its shipment and will begin shipping orders [May 4, 2011]. Kaltron Pettibone received theirs a few days ago and should be filling existing orders as I write. Let us know what you think of this stuff. Looks pretty good so far, but the proof’s in the pudding.” Grafs.com has the .260 Rem brass in stock at $96.99 per 100-ct box (Shipping included with $4.95 handling fee). Eabco.com has the .260 Rem brass in stock for $92.50 per 100-ct box.
The Freedom Group, Inc. (FG) announced that Bushmaster Firearms Int’l production has been moved to the Freedom Group’s Ilion, New York facility, where Remington rifles (and other FG family brand firearms) are crafted. Bushmaster guns were previously built in Bushmaster’s Windham, Maine factory which is slated to close its doors at the end of this month, with a loss of 73 jobs. Freedom Group expects to create 40-50 new positions at the Ilion, New York facility as a result of the relocation.
The Freedom Group is one of the largest firearms manufacturers in the world. Among its product brands are: Remington, Bushmaster, DPMS/Panther Arms, Marlin, H&R, Parker, EOTAC, Mountain Khakis, AAC, and Dakota. A Freedom Group press release states: “The Bushmaster brand and products remain key strategic assets within the Freedom Group portfolio. The manufacturing relocation will have no impact on customers or the existing supply base”. John Trull, the Freedom Group’s Firearms Marketing VP, added: “We are committed to the Bushmaster brand, its core product offerings and bringing innovative new Bushmaster firearms to our customers.”
Remington issued a Safety Warning And Recall Notice on 3/14/2011 concerning Remington’s .223 Rem ammo. Remington states that four (4) lots of its .223 Rem 62gr Hollow Point (Match) Ammunition may have been improperly loaded. The affected LOT numbers are H03RAI, H04RDI, H16NAI, and H17NDI. Lot numbers are found on the inside flap of each box. Do NOT use these lots of ammo — the cartridges may develop excessive pressure, causing “damage to the firearm, serious personal injury or death.” If you have any of the recalled ammo, contact the Remington Consumer Service Dept. at 1-800-243-9700, Prompt #4.
Remington .223 62 GR (MATCH) Hollow Point Ammunition
LOT NOS. H03RAI, H04RDI, H16NAI or H17NDI
Remington has determined that four (4) Lot Numbers of its .223 Remington 62 Gr Hollow Point (Match) Ammunition may have been improperly loaded. The four (4) Lot Numbers are identified above. Improper loading may cause a malfunction of the cartridge when the firearm is fired resulting in higher than normal pressures. This malfunction may result in damage to the firearm, serious personal injury or death.
Do Not Use REMINGTON .223 62 GR (MATCH) HOLLOW POINT AMMUNITION WITH
LOT NOS. H03RAI, H04RDI, H16NAI or H17NDI
To identify if you have one of these Lots of ammunition:
* If you have a case of .223 Remington 62 Gr Hollow Point (Match) Ammunition the Lot Number is stenciled on the outside of the case; and,
* If you have a box of .223 Remington 62 Gr Hollow Point (Match) Ammunition the Lot Number is stamped on the inside flap of the box.
If you have any of this .223 Remington 62 Gr Hollow Point (Match) Ammunition, as identified above, immediately discontinue use of this ammunition and contact Remington at the below telephone number. Remington will arrange for the return shipment of your ammunition and upon receipt will send you replacement ammunition at no cost to you. If you are unsure whether or not you have one or more of these Lots of ammunition or if you have mixed boxes of ammunition; please immediately discontinue the use of the ammunition and contact Remington at the below telephone number — we will replace this ammunition for you.
For any consumer questions or instructions on how to return of your .223 Remington 62 Gr Hollow Point (Match) Ammunition with one of the following Lot Numbers H03RAI, H04RDI, H16NAI OR H17NDI, please contact the Remington Consumer Service Department at 1-800-243-9700, Prompt #4.
For the past few years, tactical rifles have been a hot item at SHOT Show. While in the past ARs and AR variants grabbed the headlines, this year, tactical bolt-guns enjoyed the spotlight, with many manufacturers showcasing new tactical rigs built on modular stocks. The user-configurable chassis systems on these rifles provide myriad mounting options for scopes and accessories. Here are new offerings from Surgeon Rifles, G.A. Precision, and Remington.
SURGEON RIFLES
At the Surgeon Rifles booth, Preston Pritchett (Surgeon’s owner), displayed an impressive rifle built on the all-new Accuracy International AX folding-stock chassis. The AX is completely different than previous AI chassis designs. Preston told us that only 11 of these AI AX modular stocks have been manufactured so far, and he received this example just two days before SHOT show. He immediately installed a Surgeon action and barrel — but the display rifle has not even been shot — that’s how new this design is. The AX chassis features an adjustable folding stock, and a forearm slotted for rails on all SIX sides.
There is a nice over-molded, polymer gripping piece forward of the magwell. The pistol grip is nicely designed — comfortable to hold. The hexagonal AX forearm, with slots for rail-attachment, is slimmer than the handguards found on some other “black rifles” which have multiple, heavy full-length rails permanently attached to the fore-arm. Having non-removable full-length rails really is overkill. The AI AX chassis lets you mount accessory rails on six surfaces if you really need that capacity. But otherwise, you can leave the rails off. We like that flexibility. When not in use, rails are just extra weight. These new-generation tactical rifles are heavy enough as it is.
April ETA for Complete AX-Chassis Rifles from Surgeon
So when can you get one, and how much will it cost? Preston expects to have chassis units ready for builds in “about two and a half months”. The AI AX chassis system will cost $1299.00 by itself. For a complete AX-equipped Surgeon custom rifle, in addition to the chassis cost, add the price of a Surgeon action ($1295.00 MSRP), a custom barrel, and chambering. That’ll put you close to $3200.00, depending on barrel and action choice.
AX338 from Accuracy International
If you want to buy a turn-key factory rifle using the new AX chassis, Accuracy Int’l now produces the AX338, shown below. This features an Accuracy Int’l action fitted in the new AX chassis. Right now the AI-built gun is available ONLY in .338 Lapua Magnum. AI’s complete AX338, produced in the UK, will cost thousands more than a rifle built by Surgeon on the AX chassis.
G.A.P.’s New Sabre-Stocked Rifle
Our friend George Gardner of G.A. Precision (G.A.P.) showed off his latest and greatest rifle for tac comps. The gun features a G.A.P. Templar action in the new Ashbury Int’l Sabre Chassis. The Sabre chassis has lots of trick parts to reduce overall weight. For example, the handguard is made from super-light carbon fiber. The central chassis (holding the action), is made from aluminum and there are many ultra-light titanium components.
GAP’s prototype rifle was chambered in .260 Rem, but other chamberings, including .308 Win, will be offered in the future. We were impressed with the Ashbury Int’l design — some smart thinking went into weight reduction. It is not brutally heavy like some other metal-stocked tactical rifles. We like that fact that the Sabre comes in two versions, the simple “Mod 0″ with minimal rails, and the “Mod 1″ for those guys who need to attach a full set of accessories.
George also showed us one of G.A.P.’s semi-automatic AR10s. These have shown outstanding accuracy, frequently delivering 1/2-MOA or smaller three-shot groups with premium factory ammo. While George still recommends that novice tactical shooters employ a bolt-gun, he remarked that a semi-auto can be very effective in timed, “target-rich” tactical matches.
Remington Police/Military
Remington Shows Off New M24E1
Remington displayed its new XM2010 — the winner of the contract to replace the U.S. Army’s M24 Sniper Rifle. The gun, designated the M24E1, offers all the features the Army wanted… but it is a beast. The Army’s new M24E1 sniper rifle will share the Rem 700 long action (receiver) and trigger from the currently-fielded M24, but little else. (The Army specifically required that the M24E1 be built around the same 700 series long action and fire control system.) The M24E1 is considered a “total conversion upgrade”, by which the barrel, stock, magazines, muzzlebrake, suppressor, and even the optics will be changed. The M24E1 will carry a 6.5-20×50 variable power Leupold scope with a first focal plane (FFP) reticle that includes .300 Win Magnum bullet-drop compensation markings.
New Leupold Scope for M24E1
A key component of the M24E1 system is the new 6.5-20x50mm Leupold Mark 4 Extended Range/Tactical (ER/T) M5 riflescope (34mm locking version). This scope features First Focal Plane (FFP) Horus ranging reticles (H27 or H58), side parallax adjustment, and a beefy 34mm maintube.
Other notable features of the new ER/T include M5 windage and elevation adjustment dials with audible, tactile 1/10 (0.1) milrad clicks to match the mil-based Horus reticles. An elevation zero-stop helps prevent under-rotation in high-stress situations. The eyepiece offers long eye relief and it employs a “lockable” fast-focus design to ensure that the reticle remains in sharp focus. The scope has an auto-locking elevation adjustment.
Remington MSR Sniper Rifle on Display
At SHOT Show, Remington also showcased its new Modular Sniper Rifle (MSR), Remington’s entry into the competition for the new SOCOM Precision Sniper Rifle (PSR). Remington’s MSR competes directly with Barrett’s new MRAD, profiled earlier this week in the Daily Bulletin. The MSR features a beefy new titanium receiver with the ability to handle multiple chamberings up to .338 Lapua Magnum. The MSR was designed from the ground up as a switch-barrel rig, with a floating handguard, and folding, adjustable buttstock. The whole system is modular. By exchanging bolt-face, barrel, and magazine, the gun can switch from .308 Win (7.62×51), to 300 Win Mag, to .338 Norma Mag, and to .338 Lapua Mag.
For quite some time Whidden Gunworks has offered an excellent V-Block designed for Remington 700, Rem Model 7, or XP100/ XR100 actions. Whidden’s machined aluminum V-Block allows you to use multiple barreled actions in the same stock (provided action length and screw positions are the same).
Now Savage owners can benefit from a V-Block set-up. Whidden Gunworks has started selling a new V-Block especially designed for Savage actions. Models are offered for the Savage Target action, Palma action, and Savage Short and Long Actions. You can’t really tell from the photo (at left), but the V-Block does have a milled recess for the Savage recoil lug.
Whidden’s V-Blocks have slightly raised ridges the run parallel to the barrel. These help provide a solid grip on the action, so you normally do NOT need to skim-bed the V-Block. Because V-Blocks have a flat bottom and straight sides, it is easy to inlet a stock to take a V-Block — nothing’s tricky. Whidden’s Savage V-Blocks are made of 6061-T6 aluminum, surface milled for epoxy adhesion, and individually inspected. John Whidden believes that a properly installed V-Block “is easier to install, simpler to inlet, more accurate, and more versatile than any action-mounting system available.” We don’t know about the accuracy part, but a V-Block can certainly help you leverage your stock investment by running multiple barreled actions in the same stock.
Right now, Whidden’s Savage V-Blocks are in short supply so you should order directly through Whidden Gunworks, by calling (229) 686-1911. You can order Whidden’s Rem-type V-Blocks for $113.95 through Creedmoor Sports or $109.95 through Brownells.com.
Do you have the gift of gab, can you turn a phrase, and can you read a spreadsheet? Would you like to work with new guns, and get paid for attending gunshows? If so, this may be a ‘dream job’ for you. Remington Arms Co., the nation’s oldest firearms manufacturer, is looking for a new Public Relations Manager.
This is a high-profile job, with responsibility for both long-term media planning and managing the day-to-day Press Relations responsibilities for the Freedom Group companies. The PR Manager also represents Remington at trade shows, works with TV and radio broadcasters, and manages media tests of company products.
Among the required qualifications are: Bachelor’s degree from a four-year college or university; minimum of five years PR experience; journalist and writing skills; and knowledge of hunting and shooting. We know that many of our readers possess these qualifications. Who knows — perhaps you could become the new “voice of Remington” — the man (or woman) with primary responsibility for spreading the word about Remington firearms and products.
Other Remington Job Openings
In addition to the PR Manager job, Remington is looking to fill a number of other sales, contracts, and customer service positions. Current openings include:
Senior Key Account Manager, Cabella’s
Sr. Sales Support Operations Analyst
Law Enforcement Contracts Analyst
Domestic Customer Service Representative
Senior Law Enforcement/Military Customer Service Representative
Are there significant metallurgical differences in the alloys used in various brands of cartridge brass? The answer is yes, and we have proof. Using a state-of-the-art X-Ray Fluorescence Spectrometer, some tech-savy Wisconsin shooters recently analyzed the alloys in seven different types of cartridge brass.
Among Remington rifles, Custom Shop products have long enjoyed a solid reputation, though the quality control has declined in recent years. Remington is looking to return its Custom division to the glory days. As part of that effort, Remington has produced a dedicated Custom Shop website: 
OK, you .260 Rem shooters, break out your credit cards. The Lapua .260 Remington cartridge brass has finally arrived. Kevin Thomas of Lapua tells us: “Sorry for the wait guys, but it’s here. Grafs.com has its shipment and will begin shipping orders [May 4, 2011]. Kaltron Pettibone received theirs a few days ago and should be filling existing orders as I write. Let us know what you think of this stuff. Looks pretty good so far, but the proof’s in the pudding.” 
The 
Remington issued a 
At the 
G.A.P.’s New Sabre-Stocked Rifle
New Leupold Scope for M24E1
Now Savage owners can benefit from a V-Block set-up. Whidden Gunworks has started selling a new V-Block especially designed for Savage actions. Models are offered for the Savage Target action, Palma action, and Savage Short and Long Actions. You can’t really tell from the photo (at left), but the V-Block does have a milled recess for the Savage recoil lug.
Do you have the gift of gab, can you turn a phrase, and can you read a spreadsheet? Would you like to work with new guns, and get paid for attending gunshows? If so, this may be a ‘dream job’ for you. Remington Arms Co., the nation’s oldest firearms manufacturer, is looking for a new Public Relations Manager.
