“The press is the heart of the handloading operation, also traditionally the most expensive single tool employed…” — Laurie Holland
British competitive shooter Laurie Holland has reviewed three popular, single-stage reloading presses for Target Shooter Magazine (targetshooter.co.uk). Laurie bolted up a Forster Co-Ax, RCBS Rock Chucker Supreme, and RCBS Summit to his reloading bench and put the three presses through their paces. These three machines are very different in design and operation. The venerable Rock Chucker is a classic heavy, cast-iron “O”- type press that offers lots of leverage for tough jobs. The smaller RCBS Summit press is an innovative “upside-down” design with a large center column and open front. It offers a small footprint and easy case access from the front. The Co-Ax is unique in many respects — dies slide in and out of the upper section which allows them to “float”. The cartridge case is held in the lower section by spring-loaded jaws rather than a conventional shell-holder.
If you are considering purchasing any one of these three presses, you should read Laurie’s article start to finish. He reviews the pros and cons of each press, after processing three different brands of brass on each machine. He discusses ergonomics, easy of use, press leverage, smoothness, priming function, and (most importantly), the ability to produce straight ammo with low run-out. The review includes interesting data on case-neck run-out (TIR) for RWS, Federal, and Norma 7x57mm brass.
Review Quick Highlights:
RCBS Rock Chucker Supreme
“My expectations of the antediluvian RCBS Rock Chucker Supreme’s performance weren’t over high to be honest as I mounted it in the place of the Summit. As soon as I sized the first of the stretched RWS cases though, I saw why this press has been such a long-running favorite. The workload was considerably reduced compared to the other two presses and doing 40-odd cases took no time at all with little sweat — it just eats hard-to-size brass.”
RCBS Summit Press
“Despite its massive build and long-stroke operating handle, [the Summit] took more sweat than I’d expected, even if it was somewhat less work than with the Co-Ax. Although the Summit is apparently massive, I noticed that the die platform would tilt fractionally under the heaviest strains[.] It is nevertheless a very pleasant press in use and bullet seating was a doddle — the few examples tried proving very concentric on checking them afterwards. The optional short handle would be valuable for this task.”
Forster Co-Ax
“[On the Co-Ax], the operating handle is above the machine, located centrally [with] twin steel links at the top end of the press dropping down to the moving parts. The Co-Ax incorporates [many] novel features, principally its automatic and multi-case compatible shell-holder assembly with spring-loaded sliding jaws, very neat spent primer arrangements that allow hardly any gritty residues to escape and foul the moving parts and, the snap-in/out die fitment that allows rapid changes and lets the die ‘float’ in relation to the case giving very concentric results. I own this press and it meets my handloading needs very well.”
Share the post "Three Press Comparison Test: Rock Chucker, Co-Ax, Summit"
If you need a heavy-duty, single-stage reloading press, definitely look at the MEC Marksman, a beefy black single-stage unit with many impressive features. MEC, noted for its shotshell reloading machines, now offers the cast-iron MEC Marksman press, offering many features we really like. First, the rugged, cast-iron frame is strong enough for the toughest reloading jobs. Second, the Marksman features an OPEN front — that smart design makes it easier to insert and remove cartridge cases. It also makes it much easier to place your bullets during the seating stage.
This open-front design makes good sense — note that Hornady’s LNL single-stage press also has an open-front layout. Importantly, the MEC Marksman has an innovative, self-centering shell-holder. This patented design should help hand-loaders reload more efficiently.
We were impressed when we first saw the MEC Marksman press. The Marksman combines a sturdy cast-iron frame with a smart, user-friendly open-front design. With a $255.00 MSRP it is more expensive than an RCBS Rock Chucker ($214.16 MSRP), but the MEC Marksman offers some distinct advantages — such as the open front plus the patented floating shell-holder system.
MEC Marksman Press Review by Ultimate Reloader
Our friend Gavin Gear got his hands on a MEC Marksman press and put it through its paces. He came away impressed with the product, saying it delivers excellent performance, and has many impressive features. Gavin tells us: “Cast iron tools and machines are a lifetime investment. The made-in-USA MEC Marksman features ductile cast-iron construction, an open-front frame design for easy cartridge access, a new floating shell-holder design with a unique retention system, and ambidextrous handle setup.”
Gavin liked the Marksman’s system for holding spent primers. A tray sits behind the ram to catch spent primers exiting from a hole near the bottom of the ram. This is more foolproof than the plastic primer cups on some other single-stage presses. Expect less spent primer “spillage”.
The Marksman is sold as a stand-alone unit. However MEC also offers a very nice steel mount/riser for the Marksman. Gavin tested the Marksman with this riser, and he says it was sturdy and well-built. Gavin liked the riser. He said that elevating the Markman press up above the benchtop made it easier to handle cases and to operate the handle. You also get extra left- and right-side die-holders.
Manufacturer’s Product description: The MEC Marksman® is made from ductile cast iron for superior quality and durability. Our patented shell holder self-centers each cartridge. The MEC Marksman® is compatible with all 7/8-14 thread dies to change calibers quickly. Reloading .22 Hornet to .416 Rigby can all be done with one convenient machine.
Share the post "MEC Marksman Press Product Review with Videos"
by Sierra Bullets Ballistic Technician Philip Mahin for Sierra Bullets Blog
A lot of calls that come into the Sierra Customer Service Center are made by shooters [of retirement age]. Most of the time the shooter used to reload back when they were [younger] and stopped in order to raise a family, pursue a career, or both. Maybe their father or grandfather taught them back in the day and they are looking for an answer to the new whatchamacallit they found on the internet. The point is they are coming back to it because it was fun.
Reloading Can Provide Stress Relief
As a father of three, a husband, a brother, a son and son-in-law, and a friend and neighbor, I get pulled in a lot of directions. In all honesty, reloading and shooting has become a stress relief for me even though I work in the shooting industry.
Sometimes, the shooting gets put on hold for other more important things but there will always be another project or repair to accomplish. There are a lot out there that have found a way to balance the work life, the family life, and the play life. I would like to applaud you on your efforts because it is a hard thing to accomplish.
Remember to take time and relieve that stress. Do something fun, especially if it is shooting that special hand-load you just made.
AccurateShooter Comment — Hand-Loading and the Creative Process
Reloading your own precise ammo can be rewarding in many ways. First it allows you a temporary escape from work pressures, “Honey-Dos”, filing your taxes — whatever. It’s just you and Mr. Rockchucker spending quality time in the loading room. Second, hand-loading is a creative process that engages the mind. During load development, you are like an inventor, selecting a powder charge, choosing the bushing size, experimenting with seating depths, working to perfect your load.
Lastly, the process of hand-loading is rewarding because you are building something start to finish. You begin with components — bullets, brass, and powder, and end up with a finished product that (hopefully) is better than the best factory ammo you could buy. It is enormously satisfying to start with piles of bullets and brass and end up with beautiful hand-loads that can deliver great accuracy.
Hot News! We just learned that Frankford Arsenal will offer two new reloading presses this year. It may be a while before these two presses arrive on dealers’ shelves but we wanted to give you a preview. Both presses are impressive. The new FX-10 is a TEN-station, auto-indexing progessive press. It will sell for $699.99, what you might pay for a different brand progressive with fewer stations and more limited capabilities. This FX-10 press offers a smooth, gear-driven shellplate, plus dual decapping stations and primer pocket swaging capability. There are optional (extra cost) bullet and case feeders. The press even offers a built-in LED light.
The F-1 is a robust single-stage press offering power, easy (open front) case access, and smooth cycling. The F-1 boasts a linear ball bearing system for smooth operation, an integrated LED light, a fully-contained primer catch system, and precision-machined solid steel construction.
Frankford Arsenal FX-10 Progressive Press
10-Station, Auto-Indexing
Manufacturer’s Product Description:
The Frankford Arsenal FX-10 is a 10-station automatic indexing reloading press purpose-built from the ground up to be the ultimate progressive reloading press. At its core, the FX-10 features rigid steel construction, multiple ball bearings, and a proprietary 10-station, gear-driven, rotating shell plate which all combine to virtually eliminate powder spillage and bullet tipping.
The FX-10 offers innovative improvements like dual de-capping stations to prevent primer drawback, in-line primer pocket swaging capability (for both small and large primers), and the ability to run powder check and case trimming dies. The FX-10 includes a case-actuated powder measure with a positive reset that guarantees you’ll never have to worry about squib loads resulting from a sticking powder measure. When it’s time to swap calibers, the FX-10’s innovative design allows the user the ability to quickly and easily swap-out tool heads and shell plates to reload anything from 9mm to 30-06 Springfield length cartridges. The FX-10 goes further and offers refined details like a roller handle, integrated LED light, and spring-loaded case locator buttons, which allow easy one-handed case feeding and lever operation, making the FX-10 exceptionally smooth and easy to operate. Compatible with our Frankford Arsenal Case Feeder and Bullet Feeder (sold separately), the FX-10 is the ultimate solution for progressive reloading. MSRP for the FX-10 is $699.99.
FRANKFORD ARSENAL FX-10 PROGRESSIVE PRESS FEATURES
OPTIONAL CASE AND BULLET FEEDER
CASE-ACTIVATED POWDER MEASURE
INTEGRATED BEARINGS FOR SMOOTH OPERATION
IN-LINE PRIMER POCKET SWAGING
SPRING-LOADED CASE LOCATOR BUTTONS
LOADS CARTRIDGES UP TO .30-06 SPRG LENGTH
SHELL PLATES FOR POPULAR CALIBERS
Frankford Arsenal F-1 Single-Stage Press
Manufacturer’s Product Description:
The Frankford Arsenal F-1 Single Stage Press is packed with innovative features to help you reload precisely and quickly so you spend less time reloading and more time on the range. At its core, the F-1 features a linear ball bearing system for smooth operation, an integrated LED light, a fully contained primer catch system, and precision-machined solid steel construction. Compatible with standard 7/8″x14 dies, this press will load up to .338 Lapua Magnum size cartridges. MSRP for the F-1 is $149.99.
FRANKFORD ARSENAL F-1 PRESS FEATURES
RAM RIDES IN BALL BEARINGS FOR SMOOTH OPERATION
LOADS UP TO .338 LAPUA Magnum LENGTH CARTRIDGES
INTEGRATED LED LIGHT
COMPATIBLE WITH STANDARD 7/8″ x 14 DIES
USES STANDARD SHELL HOLDERS
NO-MESS PRIMER CATCH USES BOTTLE OR HOSE
SELECTABLE CAM-OVER OR STOP OPERATION
SOLID STEEL ROD FRAME PILLARS
Credit EdLongRange for Frankford Arsenal New Product Tips.
Share the post "New FX-10 and F-1 Reloading Presses from Frankford Arsenal"
Sierra Bullets asked a few hand-loaders to reveal their favorite reloading tool or accessory: “What is your favorite ‘don’t know how you ever lived without it’ piece of reloading equipment?” Some of the answers are listed below. We were interested to see some high-tech, micro-processor items mentioned, such as the AMP Annealer, and the AutoTrickler powder dispenser. Old standbys, such as the rugged RCBS Rockchucker and Dillon 650, also made the favorites list. You can nominate your own favorite reloading hardware in the comments section of the Sierra Bullets Blog.
Sierra Bullets Ballistic Technician Philip Mahin answered: “A comparator gauge to measure from the base of a case to the ogive of the bullet. This bypasses the tip of the bullet, so I can repeat the same seating depth the next time I visit a specific combination.”
Bill, Editor of Rifleshooter.com, answered: “I have so many favorite reloading tools, it’s hard to pick one. But if I had to, it would be my Forster Co-Ax press. I like the ease [with which] you can change dies and that it doesn’t require traditional shell holders. It’s a great tool to have!”
Sierra Bullets Ballistic Technician Duane Siercks answered: “I don’t know that you would actually call this equipment, but the item that comes to mind would be my reloading room/shoot house. I had always had to squeeze everything into a corner or even an unheated shed. After we bought our current house, I built a garage and placed it so that I had a window looking down a 250-yard range. I built a dedicated room with heat and A/C. It contains my reloading bench and a shooting bench. The shooting bench lets me slide open the window and shoot down the range. It is very handy to not have to load everything up to go to the range. It also makes load development a lot simpler and efficient. I don’t know how I ever got along without it.
I also wonder what I did before I acquired the Lyman 1200 DPS Powder Dispenser. This has made the process so much simpler and much easier. I also have a Lee Precison Universal Decapping Die that I would gladly spend the money on again. This may be a small thing, but it certainly is handy. The Lee would accommodate some very large cases that some of the others were too small for.”
Jon Addis answered: “Putting an A&D FX-120i scale with AutoTrickler and Auto-Throw on the bench has changed the way I reload. It’s kernel accurate in about 15 seconds. Saves time and reduces a variable. And of course, the system is made better by the Area 419 Billet Adjustable base for the trickler and Billet Powder Cup.”
This video shows the AutoTrickler V2 and Auto-Throw Combo:
Sierra Bullets Chief Ballistician Tommy Todd answered: “A brass annealing machine and a RCBS Chargemaster complimented with a Sartorious scale.”
Sierra Bullets Ballistician Gary Prisendorf answered: “RCBS Rock Chucker Press, it’s built like a tank, and it will last me a lifetime.”
Sierra Bullets Production Manager Chris Hatfield also answered: “RCBS Rock Chucker single-stage reloading press.”
Jeremy Kisner answered: “My Giraud trimmer has taken [three operations] and combined them into one easy task. I can now size my brass and then sit down and trim, chamfer, and debur to a 0.001″ tolerance in one motion.”
Dan Blake answered: “My Annealing Made Perfect (AMP) annealer. With consistent neck tension being one of the largest contributions to small Extreme Spread on muzzle velocities, I believe this induction annealer is truly the best on the market.”
This manufacturer-produced video shows how the AMP annealing machine operates:
Trevor Aldinger answered: “Area 419 Master Funnel Kit. In the past I’ve used plastic funnels and even other metal ones. This system fits case necks and flows much better than any others I’ve used, and there is no static since it’s metal. We spend a lot of time and money to get precise charges, I don’t want to lose or miss a kernel because of a cheap funnel.”
Tyler Riley answered: “My RCBS bench primer (priming tool). It has a lot more leverage than a hand primer and still has a good feel to how tight primer pockets are. Makes it much easier on my hands to prime large runs, especially new brass with tight pockets.”
Craig Arnzen answered: “My Annealeez [annealing machine] is one of the best tools in my reloading room. Neck tension is SO important, and annealing every firing really helps with that. This is an inexpensive tool that can anneal a lot of cases at once, and help me produce more consistent ammo.”
Josh Temmen answered: “Time is critical for me so my RCBS Chargemasters are indispensable (pun intended.) They cut down on time at my reloading bench while maintaining the weight tolerances required for long range shooting.”
Josh Bartlett answered: “I have my Dillon 650 set up with Whidden floating tool heads to do decapping and sizing on my match ammo. The case feeder and progressive function of the press save me a TON of time when doing lots of several hundred rounds.”
Ryan Brandt answered: “… A quality set of calipers. My reloading room is full of very nice equipment but little does more to satisfy my perfectionism than a good check with the calipers.”
Share the post "All-Star Hardware — Favorite Reloading Equipment"
Berry’s unique, all-metal Bench Topper lets you place a reloading press above your bench surface, clearing valuable space in your reloading area.
The Bench Topper, from Berry’s Manufacturing, is a sturdy platform that holds a loading press and storage bins in a raised position above your bench — effectively creating additional room for scales, trimmers, and component storage below. The $114.66 Bench Topper (Midsouth item 037-00191) can bolted to your bench, or it can be secured with C-Clamps (for easy removal). Do you load at the range? The Bench Topper can be easily transported in your vehicle, providing a handy platform for your press and powder measure.
Bench Topper Specs:
Top Plate:
6 x 20 x 1/4″
Bottom Plate:
10 x 20 x 1/4″
Height: 11.5 Inches
Weight: 12.5 Pounds
Berry’s Bench Topper is crafted from CNC-machined aluminum and powder-coated black for durability. It comes with two aluminum hangers for storage bins for bullets or brass. All fasteners are recessed for a clean work surface. NOTE: The Bench Topper must be assembled by the purchaser, and YOU MUST DRILL YOUR OWN HOLES for installation of your press or other hardware. This requires a few minutes of initial set-up time, but this allows a secure, custom installation for any brand of reloading press.
Product Tip from EdLongrange. We welcome user submissions.
Share the post "Mount Press ABOVE Your Bench with Bench Topper"
Lyman is introducing three new Brass Smith series reloading presses for 2018. Here we focus on the two full-size Brass Smith presses, the O-Frame Victory Single Stage and the new 8-Station All-American Turret Press. Both these sturdy presses feature an innovative “straight line” priming system with shielded primer tube.
New Cast-Iron Victory O-Frame Single-Stage Press
Lyman’s new Victory™ Press is built on a heavy duty cast iron “O” frame with 1-inch diameter ram and compound linkage. It looks strong and Lyman claims the “Victory Press is one of the most rugged and rigid available on the market.” The Victory Press features a simple, reliable straight-line primer feed. It’s easy to prime a case — simply push the priming arm forward to position a primer beneath the shell holder. As an added safety feature, the primer feed comes with a heavy steel shield surrounding the primer tube. The large 5-inch frame opening can take long magnum cases. MSRP is $199.45. We expect initial “street price” to be around $160.00, less expensive than an RCBS RockChucker, but more pricey than a Lee Classic Cast Press.
“It has been a while since Lyman Products introduced new presses, for the very simple reason that our presses are built to be so durable that they actually end up being handed down in families”, explained Trevor Mullen, Lyman’s VP of Marketing and Business Development. “But for 2018, we decided we needed to add certain features that make these new presses even better than their former models.”
New Cast-Iron 8-Station All-American Turret Press
Along with its new Victory Single-Stage Press, Lyman is releasing a beefy All-American Turret Press with eight (8) stations. That’s one more than the Redding T-7 Turret Press, and two more stations than the six-station RCBS Turret Press. With the Lyman’s EIGHT stations you can hold sizing AND seating dies for four different rifle cartridges. Or, if you seat bullets with an arbor press, you could have sizers for six cartridges, plus a dedicated decapping die and a factory crimp die. With eight stations available — there are countless options.
Rigidity is very important with a turret press — if you have too much “give” of flex with the turret head you may get inconsistent results when bumping shoulders using full-length dies. With a heavy cast-iron frame and turret head, Lyman says its new Turret Press is “the most rugged” on the market. We like the front-mount priming system which can easily be operated with your free hand, whether you mount the press arm on the left or the right. MSRP is $249.95. We expect “street price” to be around $220.00, quite a bit less than the six-station RCBS Turret Press.
Share the post "Heavy Metal — New Cast-Iron Presses from Lyman for 2018"
“The press is the heart of the handloading operation, also traditionally the most expensive single tool employed…” — Laurie Holland
British competitive shooter Laurie Holland has reviewed three popular, single-stage reloading presses for Target Shooter Magazine (targetshooter.co.uk). Laurie bolted up a Forster Co-Ax, RCBS Rock Chucker Supreme, and RCBS Summit to his reloading bench and put the three presses through their paces. These three machines are very different in design and operation. The venerable Rock Chucker is a classic heavy, cast-iron “O”- type press that offers lots of leverage for tough jobs. The smaller RCBS Summit press is an innovative “upside-down” design with a large center column and open front. It offers a small footprint and easy case access from the front. The Co-Ax is unique in many respects — dies slide in and out of the upper section which allows them to “float”. The cartridge case is held in the lower section by spring-loaded jaws rather than a conventional shell-holder.
If you are considering purchasing any one of these three presses, you should read Laurie’s article start to finish. He reviews the pros and cons of each press, after processing three different brands of brass on each machine. He discusses ergonomics, easy of use, press leverage, smoothness, priming function, and (most importantly), the ability to produce straight ammo with low run-out. The review includes interesting data on case-neck run-out (TIR) for RWS, Federal, and Norma 7x57mm brass.
Review Quick Highlights:
RCBS Rock Chucker Supreme
“My expectations of the antediluvian RCBS Rock Chucker Supreme’s performance weren’t over high to be honest as I mounted it in the place of the Summit. As soon as I sized the first of the stretched RWS cases though, I saw why this press has been such a long-running favorite. The workload was considerably reduced compared to the other two presses and doing 40-odd cases took no time at all with little sweat — it just eats hard-to-size brass.”
RCBS Summit Press
“Despite its massive build and long-stroke operating handle, [the Summit] took more sweat than I’d expected, even if it was somewhat less work than with the Co-Ax. Although the Summit is apparently massive, I noticed that the die platform would tilt fractionally under the heaviest strains[.] It is nevertheless a very pleasant press in use and bullet seating was a doddle — the few examples tried proving very concentric on checking them afterwards. The optional short handle would be valuable for this task.”
Forster Co-Ax
“[On the Co-Ax], the operating handle is above the machine, located centrally here [with] twin steel links at the top end of the press dropping down to the moving parts. The Co-Ax incorporates a number of novel features, principally its automatic and multi-case compatible shell-holder assembly with spring-loaded sliding jaws, very neat spent primer arrangements that allow hardly any gritty residues to escape and foul the moving parts and, the snap-in/out die fitment that allows rapid changes and also sees the die ‘float’ in relation to the case giving very concentric results. I own this press and it meets my handloading needs very well.”
Share the post "Triple Threat — Laurie Holland Reviews Three Reloading Presses"
At the request of our readers, we have launched a “Deals of the Week” feature. Every Monday morning we offer our Bargain selections. Here are some of the best deals on hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Amazon — Howard Leight Electronic Muffs (Best Seller)
Every shooter should own a pair of Electronic muffs — they are great when you are doing spotting duties or are working near the firing line. They allow you to hear ordinary conversations while still providing vital hearing protection. Right now Amazon.com has the Howard Leight Impact Sport Electronic Muffs on sale for just $36.30. These NRR 22 muffs are currently Amazon’s #1 seller in the category. NOTE: For regular, sustained shooting we recommend muffs and/or earplugs with a higher NRR rating.
2. Grafs.com — Magnetospeed Sporter $179.99
If you have been waiting to get a Magnetospeed… wait no longer. Priced at just $179.99 at Grafs.com, the Magnetospeed Sporter model costs less than half as much as Magnetospeed’s V3 models. This chronograph attaches directly to your barrel so you don’t have to go downrange to position tripods and set up skyscreens. For most people the Sporter Model contains all the features they need. Using Magnetspeed’s XFR adapter (sold separately), data can be transferred easily from the display module to your mobile device. READ Magnetospeed Sporter Review.
3. Cabelas.com — Rock Chucker Supreme Reloading Kit
Everything you see above can be yours for just $225.00, after manufacturer’s rebate. Right now, Cabela’s is selling the Rock Chucker Supreme Master Reloading Kit for $300.00. That’s a good deal as this Reloading Kit sells elsewhere for up to $360.00. But he’s the real incentive — if you spend $300.00 on RCBS products in 2016, RCBS will send you a $75.00 rebate. That reduces your net cost to just $225.00 for the entire Kit.
4. Brownells — Hornady 17 HMR Ammo, $12.79 per box
If you have ever shopped for 17 HMR ammunition, you know it rarely goes on sale (it’s the law of supply and demand). Right now, as part of its “Red, White and Boom” ammo promo, Brownells.com is offering first-quality Hornady brand 17 HMR ammo for $12.79 per 50-count box. We’ve seen ammo this sell in gunshops for $16.50 per box. Stock up now for the spring varmint season.
5. CDNN Sports — Savage 93R17 for $219.99
No more excuses — you can add a 17 HMR to your collection for under $220.00. We think everyone should own a 17 HMR rifle. The 17 HMR is the perfect cartridge for dispatching ground squirrels and other small varmints. The round shoots faster and flatter than a .22 LR, and delivers more energy. This week CDNN Sports is offering the Savage 93R17 for just $219.99. This little rifle can provide years of service in the varmint fields, and the 93R17 is also a good youth training rifle.
6. Natchez — CCI Blazer 9mm ammo, $9.99 for 50 Rounds
This is the best price we’ve found this week on newly-manufactured 9mm pistol ammunition. And this is quality, CCI made-in-USA ammo with reloadable, brass casings. We have used this CCI-made Blazer 9mm ammo in Sig, HK, and Glock pistols and it performed very well. This stuff won’t last long at this price (less than $0.20 per round). If you need 9mm practice ammo, order soon.
7. Walmart — 48-gun Stack-on Gun Safe
If you need a big safe to hold lots of guns, here’s a large-capacity Stack-On Safe that’s rated for 48 long-guns. Measuring 59″ high and a full 43″ wide, this safe is much bigger than the typical safes you find at CostCo and Sam’s Club. This safe is discounted $202 right now with “Rollback” pricing. One verified safe purchaser states: “The safe interior is nice for the price. Outside finish is great. All in all this is a GREAT value after looking at safes twice this price.”
Yes, you can get a name-brand Ultrasonic cleaning machine for under fifty bucks. This Hornady Lock-N-Load Sonic Cleaner, which sells elsewhere for $75-$85, is available at Brownells.com this week for just $49.99. This cleaning machine holds up to 200 .223 Remington cases, or 100 .308 Winchester cases.
Share the post "Bargain Finder 19: AccurateShooter’s Deals of the Week"
Bullets.com has launched a huge closeout on its entire RCBS inventory. Here’s a great opportunity to save big bucks on high-quality RCBS tools and reloading accessories, including RCBS Chargemasters and even RCBS Rockchucker presses. The folks at Bullets.com report: “We have slashed prices to levels at or below cost on hundreds of items.” Guys — take note: this is a unique opportunity to pick up some great gear at truly rock-bottom prices. In fact the deals are so good that your Editor plans to purchase a couple presses, a powder measure stand, and some accessories for my RCBS 2000 progressive press. I really don’t think you can beat these prices… and remember this is an inventory close-out sale, limited to stock on hand. When it’s gone, it’s gone. So don’t say we didn’t warn you!
Closeout items include: Reloading Presses
Electronic Powder Measures
Reloading Kits
Digital and Beam Scales
Tumblers
Ultrasonic Cleaners
Sizing and Seating Dies
Shell Holders
Bullet Casting Kits
Case Prep Tools and much more.
Here Are Some of the RCBS Presses on Sale:
Get RCBS Factory Rebates
In connection with this Bullets.com SALE, you can save even more with RCBS factory rebates. If you spend $50.00 you can get a $10.00 rebate. If you spend at least $300.00 on RCBS products you can save $50.00. These rebates are good through 12/31/2014. CLICK HERE for details.
Click for Detals
Share the post "Huge Inventory Reduction Sale of RCBS Products at Bullets.com"
Gear Review by Mark LaFevers With its innovative “moving die/static cartridge” design, the new RCBS Summit Press definitely demonstrates “out of the box” thinking. Unlike other presses, the case does not move. Rather, the reloading die comes down to the case. We are happy to report that this unique “upside-down” reloading press works great.
We have tested the new RCBS Summit Press in the workshop and in the field. We’ve now loaded hundreds of rounds with the press. It is smooth, solid, and easy to use. The spent primer ejection/capture system works great (our testers preferred the Summit’s simple, foolproof primer capture to the Rockchucker’s capture system). Most importantly, the Summit produces very straight ammo that gave excellent results on the target in actual matches.
We compared ammo loaded with the Summit with ammo loaded on an RCBS Rockchucker press. The Summit gave up nothing to the bigger press. Cartridge base-to-ogive measurements of Summit-loaded ammo were just as tight as with ammo loaded on the Rockchucker. Run-out, measured with a concentricity gauge, was the same or better (about .002 or less on bullet nose). Most importantly, the Summit loads accurate ammo. In fact, at one match, scores shot with Summit-loaded .284 Win ammo were actually better than scores shot (in the same gun) with ammo loaded on a Rockchucker:
Despite its small footprint, the Summit is very stable — it doesn’t tip, wobble, or rock. The two front mounting bolts hold it firmly in place — the Summit doesn’t need a rear anchor. This, combined with the fact that the Summit has no overhang, makes the new press ideal for a mobile application. For field use (at the range), our tester Mark LaFevers mounted the Summit press on a small platform secured to his trailer hitch (on top of a steel post). This set-up worked great, as you can see in the video below:
Watch Reloading (Sizing/Decapping, Expanding, Bullet Seating) with Summit Press
Photo shows Redding Micrometer Seating Die and .284 Win Cartridge
Mark tells us: “I think the Summit press worked out sweet mounted on the hitch pedestal. The receiver hitch pedestal I made will switch tools between a heavy barrel vise I made and the Summit press. Instead of securing the pedestal with a standard 5/8″ hitch pin, I drilled and tapped for 1/2″-13 bolt to draw the insert up tight against the receiver, eliminating wobble. For charging rounds, I bought 150 plastic test tubes with caps and racks so I can avoid weighing powder charges in the field, unless I want to make changes on the fly.”
The new Summit Press features a rugged cast-iron frame with all-steel linkages. The press is very strong with minimal flex and slop. This allows you to “bump” your case shoulders and seat bullets with great precision and repeatability. The handle can be switched from right to left side (good for southpaws), and the open-front design provides good access, facilitating quick die changes*. The 4.5-inch opening allows you to work with tall cases. Beneath the shell-holder is a spent primer catcher (not shown in photos). The new Summit press has a beefy 2-inch diameter ram, with compound linkages for plenty of leverage. A zerk fitting is included for easy lubrication. The press will accept larger bushings for oversize 1-inch dies.
*To permit his dies to be swapped from Rockchucker to Summit (and back again), with no locking ring adjustments, Mark LaFevers fabricated a new shell-holder base which positions the shell-holder .088″ higher relative to the Summit’s die port. This keeps Summit-mounted dies in the same position relative to the shell-holder as dies mounted in a Rockchucker. So, Mark can swap dies from his Rockchucker to his Summit and maintain exact COAL (when seating) and correct shoulder bump (when sizing). While Mark’s custom shell-holder base lets him swap dies quickly from one press to another, this is NOT a necessary modification. Most folks will simply re-set the locking rings.
Share the post "RCBS Summit Press Works Great in the Shop and in the Field"
The new RCBS Summit Press attracted a lot of attention when we first revealed it in the Daily Bulletin earlier this month. Readers wanted to know how well this radical new design really worked. To answer that question, we headed to the RCBS booth at SHOT Show 2013. There our buddy Kent Sakamoto gave us complete run-down on the new Summit. With the Summit, unlike other presses, the case does not move. As you can see in the video, the reloading die comes DOWN to the case.
The Summit’s open-front design is definitely a plus, and we really like the fact that all press operations take place ABOVE the benchtop. There are no linkages running below the bench, which lets you use the Summit on a bench with cabinet-style drawers. The Summit press is definitely beefy. With its massive center column, the design operates smoothly with no flexing issues. RCBS says the Summit has no more head flex than the classic “O”-design RockChucker.
The new Summit Press features a rugged cast-iron frame with all-steel linkages. The handle can be switched from right to left side (good for southpaws), and the open-front design provides good access, facilitating quick die changes. The 4.5-inch opening allows you to work with tall cases. Beneath the shell-holder is a spent primer catcher. The press will accept larger bushings for oversize 1-inch dies. Street Price in the new Summit Press is about $220.00 (optional Short Handle is another $19.95).
RCBS Summit Press Features:
• Bench-top operation
• Massive 2-inch diameter ram
• Ambidextrous handle
• Compound leverage
• 4.50-inch operating window
• Spent primer catcher
• Full frontal access
• Accepts bushings for 1″ die bodies
• Press adapter bushing
• Zerk lubrication fitting
• Made in USA
Share the post "SHOT Show Report: New RCBS Summit Single-Stage Press"
Review Quick Highlights:
If you need a heavy-duty, single-stage reloading press, definitely look at the MEC Marksman, a beefy black single-stage unit with many impressive features. MEC, noted for its shotshell reloading machines, now offers the cast-iron 
Sierra Bullets Ballistician Gary Prisendorf answered: “
Review Quick Highlights:
With its innovative “moving die/static cartridge” design, the new RCBS Summit Press definitely demonstrates “out of the box” thinking. Unlike other presses, the case does not move. Rather, the reloading die comes down to the case. We are happy to report that this unique “upside-down” reloading press works great. 
The new Summit Press features a rugged cast-iron frame with all-steel linkages. The press is very strong with minimal flex and slop. This allows you to “bump” your case shoulders and seat bullets with great precision and repeatability. The handle can be switched from right to left side (good for southpaws), and the open-front design provides good access, facilitating quick die changes*. The 4.5-inch opening allows you to work with tall cases. Beneath the shell-holder is a spent primer catcher (not shown in photos). The new Summit press has a beefy 2-inch diameter ram, with compound linkages for plenty of leverage. A zerk fitting is included for easy lubrication. The press will accept larger bushings for oversize 1-inch dies.
