Trijicon has introduced a new line of Second Focal Plane scopes with illuminated reticles. Trijicon’s new AccuPower™ riflescope series includes four models. The smallest AccuPower, well-suited for short-range hunting and 3-Gun Games, is the 1-4×24mm. Next up is a general purpose 3-9×40mm. For hunting and sporting use there are a 2.5-10×56mm and a 4-16×50mm with bigger objectives for better low-light performance. All these four models offer either 1/4-MOA or 0.1 Mil clicks. AccuPower scopes feature aluminum scope tubes, multi-coated lenses, and application-specific illuminated reticles. The 3-9x40mm has a 1″-diameter tube while the other models have 30mm tubes.
The AccuPower series incorporates a hybrid black chrome/etch and fill illuminated reticle system available in red or green, with eleven (11) brightness settings. Notably, there is an “off” feature between each brightness setting.
Four reticle choices are offered: MOA reticle, MIL-square reticle, Duplex crosshair, and the popular competition Segmented Circle crosshair with BDC capabilities.
Share the post "Trijicon Introduces Four New “AccuPower” Scopes"
In the above video, a spokesman for Horus Vision explains how and why scopes can experience zero shift. First, just cleaning the gun can cause a small shift in point of impact. Second, when you re-tighten rings and ring bases, this can cause a change in zero. Horus recommends that you use a torque wrench to confirm that you maintain the same torque settings each time. The same goes for action screw tension — tensioning your action screws can shift the point of impact.
Other factors that can cause a change in zero:
Temperature
Dramatic ranges of temperature will change your zero, because the air density affects the velocity of the bullet. With increased temperature, there may be a higher velocity (depending on your powder).
Gun Handling and Body Position
You rifle’s point of impact will be affected by the way you hold the gun. A “hard hold” with firm grip and heavy cheek weld can give you a different POI than if you lightly address the gun. Even when shooting a benchrest gun, the amount of shoulder you put into the rifle can affect where it prints on paper.
Type of Rifle Support — Bench vs. Field
Whenever you change the type of rifle support you use, the point of impact can shift slightly. Moving from a bipod to a pedestal rest can cause a change. Similar, if you switch from a mechanical rest to sandbags, the gun can perform differently. That’s why, before a hunt, you should zero the gun with a set-up similar to what you would actually use in the field — such as a rucksack or shooting sticks.
Transportation of Firearms
Even if you don’t mishandle your weapon, it is possible that a shift of zero could occur during transport. We’ve seen zero settings change when a tight plastic gun case put a side load on the turrets. And in the field, if the turret knobs are not covered, they can rub against clothing, gear, storage bags, scabbard, etc. If the knobs turn, it will definitely move your reticle slightly and cause your point of impact to be off.
Share the post "Horus Video Explains Sources of Zero Shift in Rifle Scopes"
Forum member Roy Bertalotto did a real nice off-set scope installation on a bolt gun to help a sight-challenged shooter. Roy explains: “A friend of mine shoots left-handed and has lost the sight in his left eye. I built him a scope mount so he can still shoot left-handed, but now use his right eye.” Roy’s fabrication work is impressive and we praise his efforts to help a fellow shooter stay in the game.
Roy bolted a plate to the existing scope rail on the top centerline of the Rem 700 action. This plate extends a few inches to the right. On the outboard end of the plate, Roy fitted a second scope rail, aligned with the bore. Weaver-based rings are then clamped to the outboard (right side) auxiliary rail.
Be Careful of Canting Issues with Offset Scope Installations
We’re pleased to see that Roy developed a solution for a shooter with an optical disability, but we want to stress that this is a specialized installation that can create some problems with point of impact shift if the gun is not maintained perfectly level. With the amount of horizontal offset (between the scope’s optical axis and the bore axis) built into this rig, if the rifle is canted, point of impact can shift rather dramatically. For a southpaw who is willing to adapt his/her shooting style, it may be better, in the long run, to learn to shoot right-handed if his/her right eye is the only good eye. Likewise, if a right-handed shooter can only see well through his left eye, he may benefit from learning how to hold the stock and work the trigger with his left hand. The shooter could still work the bolt with his non-trigger hand. Changing from right-hand to left-hand shooting (or vice-versa) may require a stock swap if the stock is not ambidextrous.
Share the post "Offset Scope Mount Helps Shooter with Vision Problem"
In this NSSF Video, Ryan Cleckner, a former Sniper Instructor for the 1st Ranger Battalion, defines the term, “Minute of Angle” (MOA) and explains how you can adjust for windage and elevation using 1/4 or 1/8 MOA clicks on your scope. This allows you to sight-in precisely and compensate for bullet drop at various distances.
For starters, Ryan explains that, when talking about angular degrees, a “minute” is simply 1/60th. So a “Minute of Angle” is simply 1/60th of one degree of a central angle, measured either up and down (for elevation) or side to side (for windage). At 100 yards, 1 MOA equals 1.047″ on the target. This is often rounded to one inch for simplicity. Say, for example, you click up 1 MOA. That is roughly 1 inch at 100 yards, or roughly 4 inches at 400 yards, since the target area measured by 1 MOA increases in linear fashion with the distance.
Story sourced by Edlongrange.
Share the post "Understanding Minutes of Angle (MOA) — Intro Video"
With the price of some premium scopes approaching $3000.00 (and beyond), it’s more important than ever to provide extra protection for your expensive optics. ScopeCoat produces covers that shield scopes with a layer of neoprene rubber (wetsuit material) sandwiched between nylon. In addition to its basic covers, sold in a variety of sizes and colors, ScopeCoat has a line of heavy-duty 6mm products that provide added security.
Triple-Thickness XP-6 Model for Added Protection
The XP-6 Flak Jacket™ is specifically designed for extra protection and special applications. The 6mm-thick layer of neoprene is three times thicker than the standard ScopeCoat. XP-6 Flak Jackets are designed for tall turrets, with sizes that accommodate either two or three adjustment knobs (for both side-focus and front-focus parallax models). To shield an expensive NightForce, March, or Schmidt & Bender scope, this a good choice. XP-6 covers come in black color only, and are available for both rifle-scopes and spotting scopes.
The heavily padded XP-6 Flak Jacket is also offered in a Zippered version, shown at right. This is designed for removable optics that need protection when in storage. The full-length, zippered closure goes on quick-and-easy and provides more complete protection against dust, shock, and moisture. MSRP is $30.00.
Special Covers for Binos and Red-Dots
ScopeCoat offers many specialized products, including oversize covers for spotting scopes, protective “Bino-Bibs” for binoculars, rangefinder covers, even sleeves for small pistol scopes and red-dot optics. There are also custom-designed covers for the popular Eotech and Trijicon tactical optics. Watch the Shooting USA video below to see some of ScopeCoat’s latest specialty covers.
Share the post "Protect Pricey Optics with Scope-Coats"
We are in the thick of hunting season. If you need to re-zero your favorite deer rifle, here is a dead-simple way to zero your rifle in two or three shots. The method is based on the principle of moving your cross-hairs to the point-of-impact (POI) of your first shot. You’ll need a good set of rests that will hold the gun steady while you (or a buddy) clicks the scope.
After bore-sighting, fire one round at the center of the target. Then place the rifle so the center of the cross-hairs is exactly on your original point of aim. Next, without disturbing the gun in any way, dial your turrets so that the center of the cross-hairs moves over the center of your group. That’s it. You’re now zeroed. Having a helper steady the gun as you click the turrets will make this “no-math” method work more effectively.
Click-to-Initial POI Zeroing Method Demonstrated
Simple Sight-In Procedure Put the center of your cross-hairs on the target and take one shot. Then reposition the rifle in your bags so the center of the reticle is back on the center of the target. Make sure the rifle is secure in this position (have a friend hold the rifle if necessary). Now, using your elevation and windage knobs (while looking through the scope), simply click the center of the cross-hairs to the middle of the bullet hole — without moving the rifle. You are moving the center of the reticle on to the bullet hole. Take a second shot. The second bullet hole should now be in the center of the target. Repeat the process if needed with a third shot. This procedure works at any distance.
Share the post "How to Zero Your Hunting Rifle the Easy Way"
The National Shooting Sports Foundation (NSSF) has created a video with helpful tips on mounting scopes, and adjusting the position of scopes to suit the shooter. This video, hosted by Ryan Cleckner, a former U.S. Army Sniper instructor, is aimed primarily at “hard-holders” who shoot prone. The video should prove useful for tactical shooters, varmint hunters, and F-Class shooters. Ryan does explain that, if you plan to use your rifle in standing, sitting, and prone positions, you need to set the scope in a “happy medium” position that provides sufficient eye relief in all shooting positions.
Ryan has an interesting method for leveling a rail-mounted, flat-bottomed scope (i.e. one with a flat surface under the turret housing). He simply inserts a small metal bar between rail and scope, and aligns the straight edges along the bottom of the scope turret housing with the flats on the rail (see photo). Watch how he does this on the video — it’s pretty clever. One other highlight of the video is the segment where Ryan shows how to adjust the ocular on his Leupold scope to provide the best (sharpest) image of the reticle. Ocular/reticle adjustment is covered in minutes 11:00-13:00 of the video.
The video has some faults. Some of the advice, such as “always mount the scope as low as possible” is counter-productive for benchrest shooters who want to keep their heads OFF the stock. In addition, Ryan does not explain that, with a variable power scope, proper eye relief may change considerably with the level of magnification. If you have an 8-32X scope, for example, you can set everything up perfectly for 8X magnification, only to find that you need a LOT more eye relief at 32X. We recommend positioning the scope so it provides sufficient eye relief at the highest magnification you regularly use.
Share the post "NSSF Video Provides Helpful Scope Mounting Advice"
Need a hunting scope or a good pair of compact binoculars? With Steiner’s Big Game Fall Optics Promotion, you can get 10% off retail price through the end of September on Steiner GS3 Riflescopes and Predator Binoculars. The savings are automatic — there are no rebate forms, no waiting — just instant savings. And the GS3 scopes are very nice. We’ve tried them in the field. They are sharp and clear, with nice controls. The 5X magnification range is definitely a plus for hunters.
Hunters Will Enjoy This Video. It’s Definitely Worth Watching for the Outdoor Photography.
The new Steiner GS3 scopes utilize exclusive CAT (color adjusted transmission) lens coatings to amplify contrast in the peak human vision sensitivity range. The optimized contrast helps separate game from leafy or shadow-dappled backgrounds. The GS3’s 5x zoom range gives hunters great flexibility. Zoom to low magnification for a wider field of view, then zoom in at five times higher power when you spot your prey. The GS3 series scopes provide excellent low light performance, and mount on most rifles with standard-height rings.
Steiner Predator Binoculars also utilize the game-revealing CAT lens coating to help hunters detect game in heavy cover and leafy environments. They feature a roof prism design in a tough Makrolon® housing. The high definition lenses deliver very good low light performance. At approximately 10 ounces in weight, the 8×22 and 10×26 compact models are small enough to fit in a pocket. The larger 8×42 and 10×42 models (below) offer greater low-light performance. We wish these binocs had captive lens covers, however. We try to keep ocular and objective lenses always covered except when glassing.
Share the post "Steiner Offers 10% Off GS3 Scopes and Predator Binoculars"
Have you got an old “Leapers” scope or other not-so-great optic that you’re embarrassed to mount on a rifle? Well now you can turn that ugly old optic into real money — two hundred dollars to be precise. Leica just announced a trade-in offer that provides a serious incentive to unload an old scope you don’t want or use. No broken scopes please — to qualify as a trade-in, the old scope much be functional with no broken parts. Here’s how the trade-in program works…
When you purchase a new Leica ER i riflescope from any authorized North American Leica dealer, you can receive $200.00 cash back by simply trading in a functioning riflescope of any make or model. Purchase your scope and send your trade-in to Leica between August 1 and October 31, 2014, to receive $200 by mail. The Leica ER i comes in two models: 2.5-10x42mm and 3-12x50mm. Both are available in three reticle configurations: Classic L4-A, Ballistic, and IBS.
To qualify to receive the $200 cash back, you must fill out Leica’s Trade-in Form and mail it to Leica along with your functioning trade-in scope. You must also include:
1. Copy of the sales receipt for the new Leica ER i scope.
2. Completed original ER i warranty registration
There is no brand or price limit on the trade-in. Leica will accept any brand, make or model of trade-in scope, so long as it is “functional” and a clear image and reticle are visible through the scope.
In fact, you might even find a new scope for less than twenty bucks. We found a Tasco 4x15mm scope on sale at MidwayUSA for just $9.99. And — get this — Midway is even offering free shipping on this item with orders of $25.00 or more. So if you and your buddies buy a total of three scopes (as one order) you can get them all delivered for free! CLICK HERE for $9.99 Tasco.
With this Tasco, you can shell out whopping $9.99 for a qualifying trade-in scope, and save $200.00 on a life-time guaranteed Leica. That’s smart shopping.
Share the post "Leica Offers $200.00 Trade-In Value for Any Functioning Scope"
Burris Optics is currently offering significant rebates on three lines of scopes. You can get up to $100.00 in rebates on Burris Tactical and Fullfield II scopes. For the innovative Eliminator optics with built-in laser rangefinders, the savings are even bigger — you can get up to $200.00 in rebates with your purchase. We like the Eliminator scopes for Varmint hunting. The built-in rangefinder instantly calculates the needed hold-over, based on the target distance. Then the scope displays the corrected aim point as a red dot on the vertical cross-hair. Just put the red dot on your target and pull the trigger. The Eliminator does all the work for you — no turret clicking needed.
Rebate Instructions
These Burris products are available now at Grafs.com. Rebates available for purchases made between July 1, 2014 and December 31, 2014. Mail-in form must be signed, dated, and post-marked by January 31, 2015. View Full Offer Details.
Share the post "Big Rebates on Burris Optics, Including Eliminator Laser-Scopes"
If you need a scope for your AR-platform rifle, Nikon has you covered. With Nikon’s latest AR New Rules promotion, you can save up to $100.00 on caliber-specific AR riflescopes and mounts.
The New Rules for AR promotion offers shooters up to $100 instant savings on a wide selection of AR-dedicated riflescopes. The New Rules for AR promotion includes nearly 20 models of AR-dedicated riflescopes, including the M-308, M-223, and P-300 BLK lines. This Nikon promotion is in effect right now, and will run through August 2, 2014. To learn more about the New Rules for AR promotion, visit www.nikonpromo.com.
Share the post "Big Discounts on Nikon AR Riflescopes — Up to $100.00 Off"
Forum member Jacob spotted this simple, but effective set of scope ring inserts on the Brownells Website. With these inserts, you can use a scope with 1″-diameter main tube in 30mm rings. Non-marring, matte black Delrin sleeves surround the scope tube so it can fit larger-diameter rings. Each sleeve comes in two parts for easy installation around your scope tube. This way you can use the same 30mm rings for all your scopes.
Ring Reducers are sold as front/rear kits. Cost is just $19.99 for the 1″ to 30mm converters, item 084-000-091. There are also sets that reduce 30mm rings to 25mm, and 1″ rings to 3/4″ or 7/8″.
Note: These Brownells units simply function as plastic bushings. Unlike Burris Signature Ring inserts, they do not allow you to “pre-load” windage or elevation. If your rings are misaligned, the Brownells Ring Reducers won’t correct that problem.
Share the post "Ring Inserts Adapt 1″-Diameter Scopes to Fit 30mm Rings"
Forum member Roy Bertalotto did a real nice off-set scope installation on a bolt gun to help a sight-challenged shooter. Roy explains: “A friend of mine shoots left-handed and has lost the sight in his left eye. I built him a scope mount so he can still shoot left-handed, but now use his right eye.” Roy’s fabrication work is impressive and we praise his efforts to help a fellow shooter stay in the game.
With the price of some premium scopes approaching $3000.00 (and beyond), it’s more important than ever to provide extra protection for your expensive optics. 
The heavily padded XP-6 Flak Jacket is also offered in a Zippered version, shown at right. This is designed for removable optics that need protection when in storage. The full-length, zippered closure goes on quick-and-easy and provides more complete protection against dust, shock, and moisture. MSRP is $30.00.
Put the center of your cross-hairs on the target and take one shot. Then reposition the rifle in your bags so the center of the reticle is back on the center of the target. Make sure the rifle is secure in this position (have a friend hold the rifle if necessary). Now, using your elevation and windage knobs (while looking through the scope), simply click the center of the cross-hairs to the middle of the bullet hole — without moving the rifle. You are moving the center of the reticle on to the bullet hole. Take a second shot. The second bullet hole should now be in the center of the target. Repeat the process if needed with a third shot. This procedure works at any distance.
The 
Have you got an old “Leapers” scope or other not-so-great optic that you’re embarrassed to mount on a rifle? Well now you can turn that ugly old optic into real money — two hundred dollars to be precise. Leica just announced a trade-in offer that provides a serious incentive to unload an old scope you don’t want or use. No broken scopes please — to qualify as a trade-in, the old scope much be functional with no broken parts. Here’s how the trade-in program works…
Forum member Jacob spotted this simple, but effective set of scope ring inserts on the 
