AmmoLand Shooting Sports News Service, in partnership with the National Rifle Association, will be broadcasting live video coverage of important events from the 2013 NRA Annual Meetings & Exhibits in Houston, Texas.
The streaming will open at 1 p.m. EDT on Friday, May 3rd, with the ILA Leadership Forum, which will be followed that day, at 4 p.m., by NRA News and Cam & Co on the Sportsman Channel.
On Saturday, May 4th, streaming begins at 9:50 a.m. with the NRA members meeting. In the afternoon, there is a special edition of NRA News and Cam & Co, and at 7:20 p.m. is the NRA Stand and Fight Rally. Sunday, May 5th, features the Special NRA News Wrap-Up Show at 10:00 am.
For more information, visit Ammoland.com. If you log to the NRA Meeting Video Feed, hit “refresh” to restart the embedded video player for each new event.
Report by Richard King (King’s Armory, Texas; ‘Kings X’ on our Forum)
With all the talk from Vince Bottomley in the April issue of Target Shooter about aluminum stocks, I thought you might like to see my latest project. This is my personal gun, built the way I wanted it. I know it’s radical and some may not care for it. But it works.
This is pretty much an all-aluminum rifle. The action is a Kelbly F-Class with a Shilen stainless steel competition trigger. The scope is a 1″-tube Leupold 36X with a Tucker Conversion set in Jewell spherical bearing rings. The .223 barrel is Pac-Nor 3-groove, 1:6.5″-twist mounted in a “V”-type barrel block. The bipod has vertical adjustment only via a dovetail slide activated by a stick handle. It works like a joy-stick, but for vertical only. I adjust for windage by moving the rear sandbag.
The 30″ barrel is 1.250″ in diameter. With the barrel block forward, the vibrations should be at a low frequency. Instead of one long rod whipping, I now have two short rods (barrel haves) being dampened. This is my fourth barrel block gun. They work, but so does a good pillar-bedded action. I just do stuff a little different.
The vertical “keel” down the bottom of the stock stops the “spring” of a flat-bar stock. There is little, if any, noticeable flex before or during recoil. The long length of the stock, the fat barrel, and the forward-mounted barrel block work together to keep the gun from rising off the ground. BUT, remember this is a .223 Rem rifle. A .308 Win version might act very differently. I may try a .308-barreled action soon, just to see what happens. But I will stick with the .223 Rem as my choice for match shooting.
The offset scope idea came from a benchrest “rail” gun. In truth, the whole concept came from a rail gun — just adapted to being shot off a bipod. Sure it isn’t directly over the bore. It is about 1.5″ over to the left. So if you want the scope to be zeroed on the center of the target, you have to adjust for the offset. At 100 yards that is 1.5 MOA. But at 300 it is only 0.5 MOA, at 600 only a ¼-MOA, and at 1000 about 1 click on my scope.
What the offset DOES do for me is eliminate any cheek pressure. My cheek never touches the stock. Since this is only a .223 Rem, I don’t put and shoulder pressure behind it. And I don’t have a pistol grip to hang on to, but I do put my thumb behind the trigger guard and “pinch” the two-ounce trigger.
The offset scope placement could interfere with loading a dual-port action from the left. That’s not a problem for me as I set my spotting scope up on the left side very close to the rifle. I have plenty of time to reload from the right side while the target is in the pits being scored.
Again — this is my rifle. It is designed for my style of shooting. It is not meant to be a universal “fit all” for the general public. However, I will say the design is adaptable. I can easily convert the system to run in F-Open Class. I would drop a big-bore barreled action into the “V” block, slide on a heavier pre-zeroed scope and rings, add plates on the sides up front to bring the width to 3”, and maybe a recoil pad. It might be interesting to offset the wings up from to counter torque of the big bullets. But I would also have to offset the rear bag rider to get the gun to recoil straight back.
How the Gun Performs
I have had “T” to the range only twice for load development. It groups like my present barrel-blocked 223 F-TR gun. But it’s much easier to shoot and it only moves about 3/4” — straight back. I tried to build am omni-directional joy-stick bipod but I could not get all the side-to-side wiggle out of it. So I have set it up so it only moves up and down (horizontal movement is locked-out). As it works now, the joystick on the bipod lets me set elevation on the target quickly (with up/down adjustment). Then, to adjust for windage, I slide my rear bag side-to-side as needed. Once set, I just tickle the trigger and smile.
Gun Handling — Shoot It Like a Bench-Gun
I basically shoot the gun with no cheek or body contact. I don’t grip it, other than maybe a pinch on the trigger guard. The scope was offset to the left to help the shooter move off the gun and avoid the possibility of head/cheek contact with the stock.
Listen to Richard King Explain How He Shoots his ‘Texas-T’ Rifle:
[haiku url=”http://accurateshooter.net/Video/RichKingTalks.mp3″ Title=”Richard King Talks”]
Mark your calendars for May 3-5, 2013. Those are the dates for the NRA Annual Meetings and Exhibits, to be held this year in Houston, Texas.
As ever, there will be plenty to see and do at the NRA National Meetings/Exhibits. There will be seminars, celebrity appearances, and priceless collections of firearms. Virtually all the major gunmakers in the country should have their latest products on display. In fact, there will be over 550 exhibitors whose displays will cover 400,000 square feet of exhibit hall space. In addition to fireams, you can see knives, wildlife art, shooting accessories, hunting gear, ATVs, and much more. You’ll even find an airgun range on site where you can shoot air rifles provided by Pyramyd Air.
Photo from Previous NRA Annual Meeting and Exhibits.
Chris Kyle, highly-decorated U.S. Navy SEAL (retired) and author of the best-selling book American Sniper: an Autobiography was shot dead yesterday at a Texas gun range where he was helping other veterans. The suspected shooter was Eddie Ray Routh, 25, a former marine who was suffering from PTSD. Also killed by Routh was Kyle’s friend Chad Littlefield. Read Related Story from KHOU.com.
Kyle served four tours-of-duty in the Middle East. Kyle served in every major battle in Operation Iraqi Freedom. While deployed in Iraq, Kyle was so feared that insurgents named him Al-Shaitan Ramad (“The Devil of Rahmadi”), and put a $20,000 bounty on his head — later increased to $80,000. In 2008 outside Sadr City, Kyle made a 2,100-yard shot, killing an insurgent who was armed with a rocket launcher. Kyle was using a PGM 338 rifle chambered in .338 Lapua Magnum.
During his military service, Kyle was awarded two silver stars, five bronze stars, and Navy and Marine Corps Commendation and Achievement Medals. Following his combat deployments, Kyle became chief instructor for training Naval Special Warfare Sniper and Counter-Sniper teams, and he authored the Naval Special Warfare Sniper Doctrine, the first Navy SEAL sniper manual. Kyle is survived by his wife and two children.
How would you like to be a salaried gunsmith for a major gun-maker’s USA operation? Here’s your opportunity. Blaser USA is looking to hire a gunsmith for its San Antonio, Texas sales and service center.
Candidates must have completed a recognized gunsmithing course, have “excellent communication skills”, be able to work in a “fast-paced” team-oriented business environment, and be able to work (on location) at regional and national shooting events. Duties include general gunsmithing, customer service work, and the following specific tasks:
Finish assembly of rifles and shotguns.
Inspects first piece samples from vendors.
Assembles firearms in accordance with customer specifications.
Repairs firearms for customers, sponsored shooters, and journalists.
Minor stock repair and wood-working.
Aligns sights/scopes and conducts test firings.
Documents problems on customer returns as required.
Inspects and sets out parts for repairs or product updates.
How to Apply
If you are interested in this position,
forward your résumé to:
Blaser USA Inc.
Laura Aldana
403 East Ramsey Ste. 301
San Antonio, TX 78216
email: info [at] blaser-usa.com
Story Tip by Edlongrange. We welcome reader submissions.
Did you know that Shilen Rifles Inc. offers barreled actions and complete rifles? And that Shilen offers a Savage-style, barrel-nut system for its Rem-clone actions? Starting in 2010, after a hiatus of nearly twenty years, Shilen returned to the rifle manufacturing market. After several years of development, Shilen now offers custom actions ($950.00), barreled custom actions with triggers ($1500.00), and complete rifles ($3200.00 and up).
The new Shilen custom actions are CNC-milled from high-grade stainless steel. Two types are offered — the multi-shot DGR (Repeater) or the single-shot DGV (Varminter) action. Both actions will be offered in most common bolt faces and both right-hand and left-hand actions are immediately available. The DGR and DGV actions have a 1.350″ diameter with 8-40 scope base mounting screw holes, and an 0.300″ pinned recoil lug. The spiral-fluted bolts feature a floating bolt head with an interchangeable bolt handle knob. These actions feature a footprint similar to the Remington Model 700. Both DGR and DGV actions will accept many aftermarket components crafted for Rem-700 style actions, including triggers and bottom metal.
Barreled Actions with Barrel-Nut System for Easy Barrel Exchanges
Along with the stand-alone DGR and DGV actions, Shilen is offering barreled action assemblies, chambered and ready to drop into Rem 700-inletted stocks. The actions are fitted with Shilen match-grade barrels and Shilen triggers. The barrels feature a 1-1/16″x20 barrel thread and are attached to the action by a barrel nut. This Savage-style barrel nut system simplifies headspacing, allowing easy swapping from one barrel to another. With the simple barrel-exchange procedure, you can shoot multiple chamberings with a single action/rifle. For example, shooters can change from a .223 Remington to a .204 Ruger or a .22-250 to a 6mm BR in a matter of minutes.
Complete Rifles with McMillan Stocks
With Shilen’s complete rifles, buyers can choose their chambering, and select barrel and stock configuration. Shooters can choose between a sporter weight wood stock or a variety of McMillan fiberglass stocks. With all complete rifles, the entire package is delivered in a quality gun case and Shilen even includes table mat, cleaning rod, bore guide, jag, bore brush, and cleaning patches.
There has been a strong demand for Shilen’s barreled actions and complete rifles. Accordingly, the waiting period is two to four months for complete rifles, a bit less for barreled actions. But some chamberings can be had much more quickly (if Shilen has a pre-chambered barrel in current inventory). If you’re interested, call (972) 875-5318 or email comments@shilen.com for more info.
A while back, we featured the East Texas Benchrest Shoot-out in Huntsville, TX. That match was co-sponsored by S&S Precision Rifles of Argyle, Texas. In the video below, the folks at S&S put together some tack-drivers for their customers. There are some nice glimpses of bedding work, and barrel finishing. Watch carefully — at the 40-second mark you’ll see a sub-1/4″, 10-shot group that S&S co-owner “Stick” Starks shot at 200 yards with his 6.5×47 Lapua rifle. That’s serious accuracy. Half-way through the video, Stick offers advice for shooters looking for a super-accurate fun gun for club shoots: “If you want to shoot [at] 100 and 200 yards, I’d get me a 6BR or a 30 BR. It would be the most fun gun you ever had… and the barrel will probably last three or four thousand rounds.” If you want a gun to shoot at primarily 500-600 yards, Stick recommends the 6.5×47 Lapua chambering. He told us: “Run it with the Berger 130s and Hodgdon H4350 powder. That H4350 works great with the 130 Bergers.”
Texas stock-maker Wayne Young has created an innovative modular stock. The fore-end side-plates bolt on to an aluminum sub-chassis so you can alter the width, or run an offset on either side of center. You can transform the stock from 3″ wide to 5″ wide in a couple minutes. Or, if you want to experiment with offset (i.e. having more fore-end width on one side of the barrel than the other side), you can simply remove a few bolts, and stack up the sideplates on one side.
The ability to quickly (and inexpensively) transform a stock from 3″ wide to 5″ wide is a definite plus for shooters who want to use the same rig in both F-Class and benchrest. You can run your rifle at max-legal 3″ width for F-Class, then bolt on additional fore-end “wings” to run at 5″ for bench competition. The 5″-wide stocks are now legal for 600-yard and 1000-yard benchrest, at both IBS and NBRSA registered matches. Those folks who have tried out 5″-wide stocks on Light Guns have been impressed with the results. The extra width stabilizes the rifle on the bags, reducing perceived twist (torquing) and hop. There is less “Rocking and Rolling”. With the gun torquing less, the tracking during recoil normally shows an improvement as well. (But we should say that, even with the standard 3″ width, these stocks track great.)
Video Demonstrates Superior Tracking
How does a Wayne Young stock track? Straight and true — with virtually no hop. You can see for yourself. In the video below, Wayne shoots a test rifle chambered in .284 Winchester, a popular F-Class cartridge. The load is a 175gr Berger XLD bullet pushed at 3010 fps by Reloder 17 powder. That’s a stout, fast load — the recoil force easily meets or exceeds a typical F-Open match load. To better demonstrate the gun’s handling characteristics, Wayne deliberately shoots the gun free-recoil style — without gripping hard or shouldering the stock*. As you can see, the gun recoils straight back. The forearm and buttstock also slide perfectly in the bags, without “grabbing”. (Note: In the video, the rifle’s front bag-rider section is aluminum without polymer “wings”. This particular gun was built with a wider aluminum channel to fit a large-diameter, straight-contour barrel).
Stock Specifications and Design Features
Finished stocks weigh approximately 7 pounds, 4 ounces. If needed, stocks can be lightened to just under 7 pounds. Overall length is 36″. Length of pull is adjustable from 13 to 13.75 inches with standard two-way adjustable butt pad. The main chassis is machined from billet 6061-T6 (Tee Six) aluminum, while the fore-end chassis section is 6063-T5 (Tee Five). The black side sections, fore-end plates, and buttstock lowers are CNC-machined from high-grade HDPE, a rugged, chemically-resistant polymer.
The chassis for round actions features a “V-Block” seating area. There is a flat configuration for Panda and Stiller flat-bottom actions. With either the round- or flat-bottom configuration, actions can be mounted directly on the 1.25″-square aluminum chassis, using supplied action bolts. (Skim bedding is optional.) No inletting, pillar-installation, or stock finishing (painting) is required. Just bolt your barreled action into the chassis and head to the range.
Wayne’s stocks come with two-way adjustable butt-plate, adjustable cheekpiece, trigger guard, and all fasteners. If you consider all that standard equipment and the fact that Wayne’s gunstocks require no inletting and no finishing, these stocks are attractively priced. Wayne’s F-Open/Benchrest Stock, with 3″ fore-end, costs $499.00 plus $25.00 S/H. There is also a $499.00 F-TR version with a fore-end set up for bipod attachment. (Wayne produces an integral, adjustable and removable F-TR bipod for $75.00.) Add $100.00 extra if you want the aluminum components hard-anodized. With long actions or Savage actions, there is an extra charge to configure the central chassis to fit. For more information visit WaynesGunstocks.com or call (210) 288-3063 from 8:00 am to 4:30 pm Monday through Friday.
* If Wayne was shooting a .284 Win in an F-Class match, he would grip the gun and put some shoulder into it. But for demonstration purposes in the video, Wayne free-recoiled the rig so you can see how well it tracks with no holding or steering by the shooter.
The nation’s top collegiate men and women shooters have converged on Ohio State University to compete in the 2012 NCAA Rifle Championships. The Championships run March 9-10 (Friday and Saturday) at the Converse Hall and French Field House in Columbus, Ohio. The undefeated Horned Frogs from Texas Christian University (TCU) look to upset the reigning champion Wildcats from the University of Kentucky (UK). You can follow the NCAA Rifle Championships on the NCAA.com website (rifle page). Event coverage will include live streaming video of some relays. The 8-minute video below includes profiles of top male and female shooters.
The following eight teams qualified (based on regular season aggregate scores) to compete in both air rifle and smallbore events: University of Alaska-Fairbanks (UAF), West Point Army, Jacksonville State, University of Kentucky, West Virginia University, University of Nevada, University of Texas El Paso (UTEP), and TCU. On Friday, March 9, the three-position smallbore shooters (both team and individual competition) will shoot 60 shots. The next day, air rifle competitors will take the line for 60 shots as well. According to NCAA rules: “the overall team champion will be determined by combining smallbore and air rifle team scores into one aggregate score for each institution.” The NCAA Rifle program has been in existence since 1980 and currently has 29 schools participating.
Individual and team competitions in smallbore three-position (60 shots) will be held Friday, March 9. Individual and team competitions in air rifle (60 shots) will be held Saturday, March 10. The overall team champion will be determined by combining the smallbore and air rifle team total scores into one aggregate score for each institution.
With larger-caliber rifles, manual bore-sighting (with your eyeballs) is not that difficult. Just remove the bolt, and look through the bore at the target. It helps to have a well-illuminated, high-contrast circle target about 8″ to 12″ in diameter. When you’ve got the target centered, then stabilize your gun on the rest so it doesn’t move from that position. Because bore-sighting the old-fashioned way is not that difficult with larger calibers, we’re not sure laser bore-sighters and other gadgets are really needed.
However, with smaller calibers (.17, .204, .223), manual bore-sighting is not so easy. Much less light makes its way down the smaller-diameter bore, and it’s more difficult to find the target on the background. That’s why we welcome two new products from Sightmark. This Texas-based company has developed in-chamber laser boresights for 17 HMR and .22LR rimfire guns. The tiny boresights are correctly dimensioned so they fit in rimfire chambers just like normal 17 HMR or .22LR cartridges. With the boresight in place, simply flick a switch on the battery pack and the laser dot shows exactly where the rifle is aimed. The dot is roughly 2″ in diameter at 100 yards.
Sightmark rimfire boresights are made from brass, so they are gentle on your chambers. The separate battery pack holds two (2) AAA batteries, which will power the laser for about 30 hours. We like the fact that the battery pack is separate. That makes it easier to swap in new batteries, AND, importantly, the battery pack makes it obvious when the boresight is in use. That lessens the chance that someone could mistakenly try to chamber a live round with the boresight in place.
Sightmark Rimfire Boresights Developed After Extensive Comparison Testing
“We tested every competitor’s chamber boresight for the 17 HMR and .22LR currently on the market and found that they did not work well, so we decided to create one that would,” said James Sellers, president of Sightmark. “Our Sightmark 17 HMR and .22LR boresights are as accurate as our other award-winning chamber boresights, so there’s no guessing if you’re on target”. Sightmark 17 HMR and .22LR Rimfire boresights retail for $47.99 and can be ordered directly from the Sightmark Online Catalog.
AmmoLand Shooting Sports News Service, in partnership with the National Rifle Association, will be broadcasting live video coverage of important events from the 2013 NRA Annual Meetings & Exhibits in Houston, Texas.
The offset scope idea came from a benchrest “rail” gun. In truth, the whole concept came from a rail gun — just adapted to being shot off a bipod. Sure it isn’t directly over the bore. It is about 1.5″ over to the left. So if you want the scope to be zeroed on the center of the target, you have to adjust for the offset. At 100 yards that is 1.5 MOA. But at 300 it is only 0.5 MOA, at 600 only a ¼-MOA, and at 1000 about 1 click on my scope.
Mark your calendars for May 3-5, 2013. Those are the dates for the 
How would you like to be a salaried gunsmith for a major gun-maker’s USA operation? Here’s your opportunity. Blaser USA is looking to hire a gunsmith for its San Antonio, Texas sales and service center. 
A while back, we featured the 
The nation’s top collegiate men and women shooters have converged on Ohio State University to compete in the 2012 
However, with smaller calibers (.17, .204, .223), manual bore-sighting is not so easy. Much less light makes its way down the smaller-diameter bore, and it’s more difficult to find the target on the background. That’s why we welcome two new products from 
