August 26th, 2018

Cartridge Brass Wisdom for Semi-Auto Shooters by Zediker

Glen Zediker reloaders corner midsouth book AR-16 reloading semi-auto brass safety primer resizing

Here are highlights from an article Glen Zediker wrote for the Midsouth Blog. In this article Glen focuses on cartridge brass for semi-auto rifles, AR-platform guns in particular. Glen notes that semi-autos are tougher on brass than bolt-action rifles, so you need strong, durable brass, that has been full-length sized. And you need to be careful about neck tension, and primers. The article starts with Glen’s recommendations for tough, hard brass, and then includes the points outlined below.

Glen is the author of many excellent books on reloading. This article is adapted from Glen’s books, Handloading For Competition and Top-Grade Ammo, available at Midsouth HERE. For more information about other books by Glen, visit ZedikerPublishing.com.

Handloading for Competition
by Glen Zediker

The Competitive AR-15
by Glen Zediker

Top-Grade Ammo
by Glen Zediker

ONE: Full Length-Size Cases with Adequate Shoulder Set-Back

This is a huge source of debate… amongst my readers, but, since now I’m strictly speaking of semi-auto needs I doubt there will be much dissent: full-length resize all cases! Most cases from most semi-autos will emerge with a pretty well-blown case shoulder [taming down an excessively functioning gas system can reduce this]. Make double-sure you’re sizing the cases down to at least 0.003 clearance. If you don’t there are safety and function problems ahead.

TWO: USE Sufficient Neck Tension

The case neck [must be] reduced an adequate amount to retain the bullet. There should be a minimum net difference of 0.003 inches (three-thousandths) between sized outside case neck diameter and loaded round outside case neck diameter. [Editor — that means at least three thou of “grip”.] Reason: don’t take a chance of inadvertent bullet movement during the recoil and feeding cycles. That movement can be back or forward! It’s easily possible for a bullet to jump ahead when the inertia from the bolt carrier assembly chambers the next round.

Glen Zediker reloaders corner midsouth book AR-16 reloading semi-auto brass safety primer resizing

THREE: Use Tough Primers

Choose a tough primer! There’s a floating firing pin on an AR15 (M1A also) that is supposed to be held in check but that system doesn’t always work! If you load and extract a round and see a little dimple in the primer, that’s from the firing pin tapping off of it (again, created by inertia of bolt closing). A combination of a high primer and a sensitive primer cup assembly can create a “slam-fire”. Brands? CCI has some mil-spec primers that work well, and I’ve had great success with Remington 7-1/2. Some of the well-respected “match” primers are a little thin. The CCI and Remington also hold up well to the (sometimes) greater firing forces working on the primer (again, from the quick unlocking).

Here’s what I use from Midsouth.

FOUR: Be Sure to Seat Primers Below Flush

And, finally, make double-sure that each and every primer is seated to below flush with the case head! That’s true for any firearm (because it also means that the primer is fully seated) but imperative for safety in a semi-auto. This is especially an issue for those who use a progressive-type loading press.

Permalink Bullets, Brass, Ammo, Competition, Reloading 1 Comment »
August 26th, 2018

Building a Precision Tactical Rifle — Step by Step on Video

masterpiece arms tactical rifle gunsmithing milling CNC CAD

How is a modern, metal-chassis rifle built? This very cool video from Masterpiece Arms answers that question. The nicely-edited video shows the creation of a Masterpiece Arms tactical rifle from start to finish. All aspects of the manufacturing process are illustrated: 3D CAD modeling, CNC milling of the chassis, barrel threading/contouring, chamber-reaming, barrel lapping, laser engraving, and stock coating. If you love to see machines at work, you will enjoy this video…

masterpiece arms tactical rifle gunsmithing milling CNC CADmasterpiece arms tactical rifle gunsmithing milling CNC CAD

masterpiece arms tactical rifle gunsmithing milling CNC CADmasterpiece arms tactical rifle gunsmithing milling CNC CAD

masterpiece arms tactical rifle gunsmithing milling CNC CADmasterpiece arms tactical rifle gunsmithing milling CNC CAD

Permalink - Videos, Tactical No Comments »
August 26th, 2018

How to Build Your Own AR-15 — Step-by-Step

AR-MPR-Build-2-AR-15-Tools
Here are the main tools you’ll need to assemble an AR-platform rifle

Planning to put together an AR-platform rifle? Or are you looking to upgrade your AR with a new barrel, stock, or trigger group? Then you should check out the AR-15 Rifle Build DVD from our friends at UltimateReloader.com. This DVD covers all the details of a custom build, using high-resolution video sequences, and helpful supporting graphics.

AR-15 DVD ultimatereloder.com

In this DVD, Ultimate Reloader’s Gavin Gear guides you through the entire process including selecting components, acquiring and using the necessary tools, assembly steps and details for each component, and even mounting a scope. Building an AR-15 can be overwhelming, but with the right guidance and help it’s not difficult and can be very rewarding. With this DVD you’ll be able to build your AR-15 with confidence.

Upper: Barrel / Gas Block / Gas Tube
AR-MPR-Build-4-Barrel-and-Gas-Tube-2

Upper: Handguard Installation
AR-MPR-Build-5-Handguard

UltimateReloader.com’s AR-15 Build DVD is available just $9.90 (plus $3.80 shipping/handling). This DVD can pay for itself many times over by showing you how to do your own gunsmithing (and get quality AR components at attractive prices).

Gavin in Action — Seven-minute AR-15 Build
To preview the AR Build DVD, check out this YouTube video from UltimateReloader.com. This 12-minute video shows the basics of assembling a standard AR15 with Del-ton components. Gavin shows how to install the AR trigger group and other parts in an AR-15 lower. You’ll also see the basics of barrel and handguard installation. This video covers the highlights, but we strongly recommend you buy the full DVD before starting your first AR-15 build.

Permalink Gunsmithing, Tactical, Tech Tip No Comments »