Looking for a good load for a new rifle? Or perhaps you want to try a new powder and bullet combo for an existing rig. One of the best places to start for load data is Hodgdon’s online Reloading Data Center for pistol, rifle, and shotgun reloaders. Check out the enhanced Data Center at www.HodgdonReloading.com.
In the Data Center, you’ll find thousands of load recipes for pistol, rifle, and shotgun. Rifle shooters will find dozens of loads for their favorite Hodgdon, IMR, and Winchester powders such as H4198, Varget, H4350, and IMR 8208 XBR. And Hodgdon’s Reloading Center is “mobile-friendly” so it works well with smartphones and tables. Navigation is easy, and you can set the search criteria easily choosing your favorite powder or bullets. After choosing a cartridge, you can pre-select specific bullet weights and powder types. That quickly delivers just the information you want and need. You won’t have to scroll through scores of entries for bullets or powders you don’t use.
Mobile users will notice that the updated/enhanced Reloading Center is much more “user-friendly” for smart-phone and tablet users. Controls have been optimized for touch-screens, and buttons are large and easy to use. Likewise the results are displayed in a large, easy-to read format.
Hodgdon tip from EdLongrange. We welcome reader submissions.
Share the post "Hodgdon Reloading Data Center — Good Place to Start"
Hunting season is around the corner. We know many readers will be zeroing their hunting rigs in the next few weeks. Here is a very simple but effective way to zero any scoped rifle in a few minutes, with just four shots.
Follow this simple procedure to get a solid zero for a hunting rifle in just four shots. Of course you probably want to fire a few more rounds to confirm your zero before you head off to your hunting grounds, but this will let you get on-target with a minimum amount of time and ammo expended. (This assumes your scope is securely mounted, and the bases are not drastically out of alignment.)
QUICK-TIP: The Key to this procedure is Dialing to Shot One Point of Impact (POI). Re-aim at center of target after SHOT ONE. Then with the rifle motionless, use the turrets to put the middle of the cross-hair on the first shot location.
1. First, remove the bolt and boresight the rifle. Adjust the position of the rifle so that, looking through the bore, you can see the center of the target with your eyes. Secure the rifle in the rests to maintain its position as boresighted. Then, without moving the rifle, center the reticle. That should get you on paper. With the rifle solidly secured in front and rear rests or sandbags, aim at the center of a target placed at your zeroing distance (50 or 100 yards). Confirm there are no obstructions in the barrel! Then load and fire SHOT ONE. Then, return the gun to the exact position it was when you pulled the trigger, with the cross-hair centered on the target as before.
2. Locate, in the scope, where your first bullet landed on the target. Now, while you grip the rifle firmly so it doesn’t move, have a friend adjust the turrets on your scope. While you look through the scope, have your friend turn the windage and elevation turrets until the cross-hairs, as viewed through the scope, bisect the first bullet hole on the target. In other words, use the turrets to move the center of the reticle to the actual position of shot number one. IMPORTANT: Dial the crosshairs to the hole — don’t move the rifle.
3. After you’ve adjusted the turrets, now re-aim the rifle so the cross-hairs are, once again, positioned on the target center. Keep the rifle firmly supported by your rest or sandbag. Take the SECOND SHOT. You should find that the bullet now strikes in the center of the target.
4. Take a THIRD SHOT with the cross-hairs aligned in the center of the target to confirm your zero. Make minor modifications to the windage and elevation as necessary.
5. Finally, shoot the rifle from a field rest (shooting sticks, bipod, or rucksack) as you would use when actually hunting. Confirm, with SHOT FOUR, that your zero is unchanged. You may need to make slight adjustments. Some rifles, particularly those with flexy fore-arms, exhibit a different POI (point of impact) when fired from a bipod or ruck vs. a sandbag rest.
If you recently cleaned your rifle, you may want to fire two or three fouling shots before you start this procedure. But keep in mind that you want to duplicate the typical cold bore conditions that you’ll experience during the hunt. If you set your zero after three fouling shots, then make sure the bore is in a similar condition when you actually go out hunting.
Share the post "Zero Your New Hunting Rifle in Just Four Shots"
Earn Up To $60 Cash Back On VihtaVuori Powders
The 2018 VihtaVuori Rebate Program is under way. For a limited time, earn $5.00 back per bottle when you purchase VihtaVuori powders, maximum 12 one-pound containers. Offer is valid on qualifying purchases made between August 15, 2018 and October 15, 2018. Limit one offer per household.
VV Rebate Start Date: 8/15/2018
VV Rebate End Date: 10/15/2018
Postmarked By Date: 11/30/2018
Minimum Purchase: One 1-pound bottle
Maximum Purchase: Twelve 1-pound bottles
Maximum REBATE is $60.00
IMPORTANT — Keep your receipts and note the labels. The Rebate application MUST include proof of purchase showing retailer name and date of purchase. This can be either an online order receipt or retail cash register receipt. And your Rebate Form MUST include the unique serial number for each and every VihtaVuori bottle you purchase.
This Rebate is offered with powder purchased through these (and other) fine vendors:
Private or second party sales and dealers do not qualify. Offer valid in the USA only. Must include proof of purchase and unique serial number(s) for each VihtaVuori bottle you purchased. Offer does not apply to backorders. All shipping and fees still apply. Offer is redeemed through VihtaVuori, NOT the retailer.
Share the post "Vihtavuori $5.00 per Pound Powder Rebate Program"
Sad to say, here’s another example of a large tech enterprise bullying the firearms industry. Some very large credit card processors have refused to process firearms transactions, and we’ve heard reports of business insurers dropping policies for gunsmiths and gun accessory producers, or raising rates by as much as 700%. This is not a good time to be a gun retailer or gun manufacturer. These issues are part of larger battle, with major media, tech, and financial institutions targeting the firearms industry.
Many firearms retailers and ranges may be impacted by a new “Acceptable Use Policy” from Shopify. This policy blocks a wide variety of firearms products from online stores. Many mag-fed semi-auto rifles can no longer be sold, and unfinished lower receivers are also on the “prohibited products” list.
Report by NRA Institute for Legislative Action (NRA-ILA)
Spike’s Tactical, a Florida-based firearms manufacturer and retailer, is just one of the businesses who received an alarming email from its online store management platform, Shopify — a company used by more than 600,000 merchants [for] marketing, inventory management, payments, and shipping.
Cole Leleux, General Manager of Spike’s Tactical, said a three-sentence email from Shopify was the only notice Spike’s Tactical received alerting them to a new change in Shopify’s “Acceptable Use Policy” that will now “restrict the sale of certain firearms and firearm parts.”
According to an article by Ammoland.com, some of the new arbitrarily amended rules in Shopify’s policy “now include banning the sale of semi-automatic firearms that have an ability to accept a detachable magazine and are capable of accepting more than 10 rounds. Additionally, unfinished lower receivers are also prohibited[.] Most of Spike’s Tactical’ s products include AR-15 parts and full rifles, which would fall under those new restrictions.”
“It’s just crazy to go from no firearm policy to no guns overnight,” said Leleux, “We’ve been sitting back quietly while Google stops us from advertising — we can’t advertise on Facebook, we can’t advertise on Instagram. We are a legal business in this country and I can’t use the most popular platforms to advertise.”
Aside from how Shopify’s new policy will affect his business, Leleux says what bothers him most is the hypocrisy… Leleux says Shopify assured him it was firearm-friendly and he would have no problems. Shopify’s about-face came after Leleux spent $100,000 and signed the contract.”
Gun Shops Also Impacted by Shopify Policy Change
Shopify has also restricted a Washington state gun shop and range. Canada-based Shopify recently notified The Marksman, an indoor gun range and retail shop in Puyallup (WA), that it must remove a number of products from its online store, including semi-auto rifles. Shopify’s new Acceptable Use Policy (AUP) no longer allows the sale of many popular (and legal) firearms sold by The Marksman.
The Marksman’s Mike Grabowski explains: “The Marksman has been in business for over 38 years and has always enjoyed great community support by the public and Law Enforcement. We provide a safe place for our community to shoot and learn about safe firearms handling. Over the years we have educated … thousands of people on how to safely handle and use firearms.”
Grabowski says Shopify’s policy change was unwarranted and unexpected: “When we entered into our relationship with Shopify they expressed no concern about the products we sell. We have spent thousands of dollars building and maintaining our e-commerce presence, as well as contributing to Shopify’s income. It is unacceptable to us that they now decided that they don’t like guns and therefore will proceed to terminate their relationship with [us] and many other firearms-related companies.”
Editor’s Comment: It will become increasingly difficult for Americans to exercise their Second Amendment rights, and for hunters and target shooters to pursue their hobbies, if firearms-related enterprises are denied the ability to sell products, collect invoices, insure their facilities, or communicate with the public.
This is a worrisome trend. The example of Shopify and The Marksman is just the tip of the iceberg. Other gun-related businesses are now facing “black-balling” by big companies that handle banking, insurance, and payment processing.
Share the post "E-Commerce Company Restricts Online Firearms Sales"
As part of NRA Women TV, hunting guide Kristy Titus hosts a series of videos that explain important strategies and shooting skills for hunters. Titus, co-host of the Team Elk TV show, is a certified instructor who has hunted around the globe. She grew up in the outdoors, running pack mules in Oregon with her father. In these videos, Kristy discusses demonstrates field positions that can be employed during a hunt. She also explains preparation for a hunt, including fitness training.
Click each link below to watch other Kristy Titus Hunting Videos.
“When it comes to bolt-action rifle fit, there is no ‘one size fits all’,” says Titus. “When picking out your rifle [consider options] after the purchase to ensure you are as comfortable as possible.”
Share the post "Hunting 101: Tips and Tactics for More Successful Hunts"
Even wonder how a pump shotgun works? Then watch this fascinating video from MidwayUSA. The operation of a pump-action shotgun is illustrated with a special cut-away version of a Winchester Model 12. The shotgun has been modified to reveal the inner workings. This cut-away Model 12 still loads and ejects dummy shells, but you can see how the lugs, slides, locks, ramps, springs and other internal parts work. You’ll be amazed how complicated this old pump-gun is. (The Model 12, Winchester’s first hammerless shotgun, is one of the most popular scatterguns ever made. Over 2,000,000 were sold.)
Skip Ahead to 3:00 to See Cut-Away in Action
To see how the Model 12 works, you can skip forward to the 3:00 minute mark in the video. The first part of the video shows how the Model 12 was “sliced and diced” to expose the inner workings. Larry Potterfield of MidwayUSA explains that “the factories often used cut-aways as sales tools to show how a specific model operated”. In addition the U.S. Military used cut-aways for training purposes.
Here is the cut-away completed. Even the pump grip has been sliced to reveal the inner workings.
A round has been picked up from the feed tube, and then is lifted into the chamber.
Share the post "ScatterGun Revealed — Cut-Away Winchester Model 12 Shotgun"
This is a “feel-good” story about volunteers who helped build three modern ranges at the Boy Scouts of America (BSA) Camp Meriwether facility in coastal Oregon.
For the shooting sports to survive and thrive, we need to train new shooters, particular young boys and girls. Many of us learned to shoot in the Boy Scouts. Now, through the efforts of Union volunteers, thousands of Scouts will enjoy quality marksmanship training at Camp Meriwether. Sixteen skilled volunteers have helped construct a 24-lane rifle range, a 24-lane archery range, and a 10-station shotgun range. An official dedication ceremony is planned later this summer.
Union volunteers teamed with the Union Sportsmen’s Alliance to help complete an ambitious shooting range-expansion project at the 790-acre Camp Meriwether in Oregon. Sixteen volunteers from the United Union of Roofers, Waterproofers and Allied Workers (RWAW) Local 49 and Laborers’ International Union of North America (LiUNA) Locals 737 and 296 donated 260 hours of skilled labor to help complete the $800,000 project, which added three new ranges to the popular Boy Scout camp.
Archery and shooting sports (airgun, rifle, and shotgun) are among the Boy Scout’s most popular activities. Yet for years, Camp Meriwether’s facilities were limited to just eight rifle shooting stations, eight archery stations, and two shotgun stations.
In 2013, the BSA Cascade Pacific Council decided to expand Meriwether’s facilities with new 24-lane rifle range, 24-lane archery range, and 10-station shotgun range. After years of planning and site prep, the project’s final phase began in 2018. This spring and summer, union volunteers assisted in the framing, sheeting, and underlayment for the three new range structures, which triple the camp’s capacity to teach scouts marksmanship.
“The involvement of skilled trade volunteers is so important when a BSA camp takes on a major project,” said Frank Reigelman, BSA’s team lead for outdoor programs and properties. “Kids from southern California to Washington get together here to learn about the outdoors and experience activities like archery, trapshooting, and riflery,” added USA project leader Travis Hopkins, of RWAW Local 49. “This teaches them pastimes they can enjoy for a lifetime.”
Union Sportsmen’s Alliance CEO Scott Vance added: “The Boy Scouts of America will use these new ranges to teach thousands of youths safe and responsible firearms and archery skills each season for years to come.”
About Camp Meriwether
Located in rugged wilderness along the Pacific coast near Cloverdale, Oregon, 790-acre Camp Meriwether, the flagship of the BSA’s Cascade Pacific Council, can accommodate more than 500 campers each day. Acquired in 1926, Camp Meriwether is one of the few Boy Scout camps fronting the ocean — it boasts two miles of private beach.
Camp Meriwether includes Lake Chamberlain, a fresh-water lake for swimming and boating, a trading post, a .22 rifle range, a shotgun range, an archery range, a black powder range, scoutcraft, and an ecology study center. For experienced campers, Meriwether offers high adventure hikes and a rock climbing program on a 44′ tower.
Click Video to see Camp’s Beaches, Facilities, and Adventure Programs:
Share the post "Union Volunteers Help Construct Boy Scout Ranges in Oregon"
Here’s a very cool 3D Animation showing pistol rounds being fired. Computer-generated graphics provide a look inside the cartridge at the moment of ignition as the primer fires and the flame front moves through the ignited powder. It’s really kind of mesmerizing. If you’ve every wondered just what happens inside your cartridges the moment that firing pin strikes, then watch this video…
Watch Video to See Handgun Ammo Being Chambered and Fired:
Mute Enabled — Click Speaker Icon to Hear Audio. Firing Sequence Starts at 1:28.
This animated video from German ammo-maker GECO (part of the Swiss RUAG group of companies) reveals the inside of a pistol cartridge, showing jacket, lead core, case, powder and primer. Employing advanced 3D rendering and computer graphics, the video shows an X-ray view of ammo being loaded in a handgun, feeding from a magazine.
Then it really gets interesting. At 1:28 – 1:50 you’ll see the firing pin strike the primer cup, the primer’s hot jet streaming through the flash-hole, and the powder igniting. Finally you can see the bullet as it moves down the barrel and spins its way to a target. This is a very nicely-produced video. If you’ve ever wondered what happens inside a cartridge when you pull the trigger, this video shows all. They say “a picture’s worth a thousand words”… well a 3D video is even better.
Share the post "When Rounds Fire — 3D Animation of Pistol Firing Process"
Bullets.com is closing up shop. For the past few months Bullets.com has selling off its inventory. There are still some great products left at really low prices — in many cases below wholesale cost. How about a 100-ct box of 197gr 7mm Sierra MatchKings for just $22.95. Awesome deal — MidwayUSA charges $49.99/100 for the same 197gr bullets! Or grab some very good Norma rimfire ammo for less than $3.00 a box. You’ll want to act soon to enjoy these bargains before they’re gone for good.
Here is just a small sample of the great deals currently available:
Some of the product lines will still be carried by Grizzly.com, but bullets, brass, powder, and ammo inventories are being liquidated along with many reloading products and gunsmithing tools. You’ll find huge discounts on many top-tier products.
Here’s your chance to save big bucks on quality tools, gear, ammo, and reloading components. Guys — take note: this is a unique opportunity to pick up some great products at truly rock-bottom prices. But remember this is an inventory close-out sale, limited to stock on hand. When it’s gone, it’s gone.
Share the post "Killer Deals at Bullets.com — Liquidation Sale"
Chart created with Ammoguide’s Visual Comparison Tool. Visit Ammoguide.com to learn more.
One of our forum members was looking for a very accurate, mid-sized 6.5mm cartridge for target working and coyote hunting. There are many great options including the 6.5 Grendel, 6.5×47 Lapua, 6.5 Creedmoor, and Remington .260 (a 6.5-08). If you are considering the 6.5×47 you should read our 6.5×57 Cartridge Guide authored by the 6.5 Guys. This and other 6.5mm cartridges are covered in this introduction to 6.5 mm cartridges prepared by Eben Brown, President of Eabco.com.
Quick Guide to 6.5mm Cartridges
by Eben Brown, EABCO.com, (E. Arthur Brown Co. Inc.)
The current popularity of 6.5mm cartridges in the USA has been a long time in coming. I won’t go into my opinions on why it took so long to catch on. The important thing is that it finally HAS caught on and we’re now so fortunate to have a wide selection of 6.5mm cartridges to choose from!
6.5mm Grendel – Developed by Alexander Arms for the AR15 and military M4 family of rifles. The Grendel fits the dimensional and functional requirements of these rifles while delivering better lethality and downrange performance. [Editor: The little 6.5 Grendel delivers a lot of performance from a small package. This is one of the most accurate cartridge options for the AR15 platform.]
6.5mm BRM – Developed by E. Arthur Brown Company to give “Big Game Performance to Small Framed Rifles” — namely our Model 97D Rifle, TC Contender, and TC Encore. Velocities of 2400-2500 fps with 140gr bullets puts it just under the original 6.5×55 Swede performance.
6.5mm x 47 Lapua – Developed by Lapua specifically for international 300m shooting competitions (with some interest in long-range benchrest as well). Case capacity, body taper, shoulder angle, and small rifle primer are all features requested by top international shooters. You can expect velocities of 2500-2600+ with 140 gr bullets.
6.5mm Creedmoor – Developed by Hornady and Creedmoor Sports, the 6.5mm Creedmoor is designed for efficiency and function. Its shape reaches high velocities while maintaining standard .308 Winchester pressures and its overall length fits well with .308 Win length magazines. You can expect velocities of 2600-2700+ fps with 140gr bullets. [Editor: Yep, we know some PRS guys are loading hotter than that in bolt guns. We recommend you try the 120-130 grain bullets also with this cartridge. That may put you in a better accuracy node.]
This video reviews 6.5 Creedmoor Cartridge Brass options:
.260 Remington – Developed by Remington to compete with the 6.5mmx55 Swedish Mauser that was (finally) gaining popularity in 1996. By necking down the 7mm-08 Remington to 6.5mm (.264 cal), the .260 Remington was created. It fit the same short-action [receivers] that fit .308 Win, .243 Win, 7mm-08 Rem, etc. You can expect velocities of 2600-2700 fps with 140gr bullets in the 260 .Remington.
[Editor’s Note: In the .260 Rem, try the Lapua 120gr Scenar-Ls and/or Berger 130gr VLDs for great accuracy and impressive speeds over 2950 fps.]
6.5mm x 55 Swedish Mauser – This was the cartridge that started the 6.5mm craze in the USA. It is famous for having mild recoil, deadly lethality on even the biggest game animals, and superb accuracy potential. Original ballistics were in the 2500 fps range with 140gr bullets. Nowadays handloaders get 2600-2700+ fps.
[Editor’s Note: Tor from Scandinavia offers this bit of 6.5x55mm history: “Contrary to common belief, the 6.5×55 was not developed by Mauser, but was constructed by a joint Norwegian and Swedish military commission in 1891 and introduced as the standard military cartridge in both countries in 1894. Sweden chose to use the cartridge in a Mauser-based rifle, while Norway used the cartridge in the Krag rifles. This led to two different cartridges the 6.5×55 Krag and 6.5×55 Mauser — the only real difference being safe operating pressure.”]
6.5-284 Norma — This comes from necking the .284 Winchester down to .264 caliber. Norma standardized it for commercial ammo sales. The 6.5mm-284 was very popular for F-Class competition and High Power at 1,000 yards. However, many F-Class competitors have switched to the straight .284 Win for improved barrel life. 6.5-284 velocities run 3000-3100+ fps with 140gr bullets.
.264 Winchester Magnum – Developed by Winchester back in 1959, the .264 Win Mag never really caught on and may have delayed the ultimate acceptance of 6.5mm cartridges by US shooters (in my opinion). It missed the whole point and original advantage of 6.5 mm cartridges.
The Original 6.5mm Advantage
The special needs of long-range competition have skewed things a little. However the original advantages of 6.5mm cartridges — how deadly the 6.5mms are on game animals, how little recoil they produce, and how easy they are to shoot well — still hold true today.
Share the post "6.5 Creedmoor and Seven Rival 6.5mm Cartridges"
Here’s a great offer if you are looking for a fine hunting scope. Now through August 26, 2018, Zeiss is offering a $100 instant rebate on Conquest V4 riflescopes. Purchase any of the four Conquest V4 scopes and immediately save $100.00. No forms to complete. No mail-in rebates. Instant savings.
The German-engineered Conquest V4 line-up includes 1-4x24mm, 3-12x56mm, 4-16x44mm, and 6-24x50mm models, priced from $799.99 to $1,199.99. These scopes boast a large range of elevation travel. All Conquest V4s feature 30 mm main tube, second focal plane reticle, and at least 3.5 inches of eye relief. They also feature over 90% light transmission to the eye, making them great for dawn and dusk hunting. Illuminated reticles are standard on the 1-4x24mm models, optional on the 3-12x56mm and 6-24x50mm models.
The high-definition glass on Conquest V4 scopes is treated with Zeiss T six-layer light transmission coatings. Ocular and objective lenses are further treated with LotuTec hydrophobic protective coatings. All Conquest V4 rifle scopes are covered by the Zeiss Limited Lifetime Transferable Warranty, and are further supported by a Zeiss Five Year No-Fault Policy. For more information, visit Zeiss.com/us/sports-optics.
Share the post "Get $100 Instant Rebate on Zeiss Conquest V4 Scopes"
The NRA’s American Rifleman showcased an interesting project this week — an upgraded Ruger American Rifle Predator in 6.5 Creedmoor. The video below shows how a laminated wood stock from Boyds Gunstocks was adapted for the Ruger. A Boyds Prairie Hunter model in gray laminate was selected. This was custom-bedded to the Ruger’s action using Brownell’s Acraglas.
All Ruger American Rifle models employ dual aluminum V-Blocks to support the action. These fit slots in the underside of the action. Boyds makes its own version of these V-Blocks which were installed in the Boyds stock to secure the action.
Project leader Joe Kurtenbach says the size, shape, and geometry of the Boyds V-Blocks is very accurate, so they fit the Ruger action well. To further support the action, Acraglas bedding compound was applied to the inside of the stock, after release compound was applied to the barreled action. With this DIY bedding job, the Boyds laminated stock is definitely an improvement over this original “Tupperware” factory stock.
DIY Bargain Hunter Upgrade
American Rifleman states: “The Ruger American has some great features—hammer-forged barrel, reliable action, crisp trigger — but many would not consider the molded, polymer stock to be among them. Luckily, there are aftermarket options to enhance the rifle’s utility and aesthetics. A durable, attractive stock from Boyds Gunstocks and some DIY action bedding, using Brownells Acraglas, is the next step in the precision-driven hunting rifle build.”
Choice of Gun and 6.5 Creedmoor Chambering
For this project, American Rifleman’s Joe Kurtenbach selected one of his favorite cartridges, the 6.5 Creedmoor. Introduced in 2007 by Hornady, the accurate, flat-shooting 6.5 Creedmoor has proven very popular with both hunters and tactical/PRS shooters. The Ruger American Rifle Predator was chosen for its affordable price, reliable action, and Ruger Marksman adjustable trigger.
In this video, Kurtenback explains how and why the 6.5 Creedmoor chambering and Ruger American Rifle were chosen for the Precision Hunter rifle build project.
Share the post "6.5 Creedmoor Hunting Rifle Upgrade — Re-Stocking a Ruger"
Looking for a good load for a new rifle? Or perhaps you want to try a new powder and bullet combo for an existing rig. One of the best places to start for load data is Hodgdon’s online Reloading Data Center for pistol, rifle, and shotgun reloaders. Check out the enhanced Data Center at www.HodgdonReloading.com.
This animated video from German ammo-maker 
.260 Remington – Developed by Remington to compete with the 6.5mmx55 Swedish Mauser that was (finally) gaining popularity in 1996. By necking down the 7mm-08 Remington to 6.5mm (.264 cal), the .260 Remington was created. It fit the same short-action [receivers] that fit .308 Win, .243 Win, 7mm-08 Rem, etc. You can expect velocities of 2600-2700 fps with 140gr bullets in the 260 .Remington.
All Ruger American Rifle models employ dual aluminum V-Blocks to support the action. These fit slots in the underside of the action. Boyds makes its own version of these V-Blocks which were installed in the Boyds stock to secure the action.
