November 22nd, 2020

Sunday GunDay: Jonathan Ocab’s Vudoo/MPA .22 LR for NRL22

jonathan Ocab v-22 vudoo action MPA BA Comp chassis rimfire tactical NRL22 sunday gunday Center-X 6mm creedmoor PRS

Today we feature a top-flight tactical .22 LR rig belonging to Jonathan Ocab. A talented Highpower marksman with the Distinguished Rifleman Badge, Jonathan also enjoys rimfire tactical disciplines which he features on his Youtube Channel. Jonathan now runs a monthly NRL22 match in California. His interest in the NRL22 game started with a CZ 455, but soon he stepped up to the impressive rig you see here. This boasts all top-tier components: Vudoo V-22 mag-fed action, Bartlein barrel, MPA Chassis, and Kahles K525i scope. Jonathan carefully selected all this hardware and assembled the rifle himself.

jonathan Ocab v-22 vudoo action MPA BA Comp chassis rimfire tactical NRL22 sunday gunday Center-X 6mm creedmoor PRS

My Vudoo/MPA Rifle for NRL22 and Long Range Rimfire
Report by Jonathan Ocab, Ocabj.net.
I became interested in rimfire shooting due to not having as much access to longer distance ranges, and the emergence of NRL22 matches. Back in 2017 I had acquired a CZ 455 and ran it in NRL22 club matches. It worked well, but as I started spending most of my time on my club’s rimfire range, I focused on getting a Vudoo Gun Works V-22. The Vudoo V-22 appeared to offer a true repeater that had the feel of a full-sized centerfire rifle along with high accuracy/precision potential.

After a lot of research, I decided to put in an order for a barreled action and acquired a Vudoo Gun Works V-22 action with a 20″ Bartlein barrel, 1-16″ twist, and MTU contour, all in Flat Dark Earth Cerakote (along with a +30 MOA base). I then acquired the TriggerTech Diamond Trigger Pro Curved, Masterpiece Arms BA Comp chassis (in Flat Dark Earth), American Rifle Company M10 34mm rings (28mm height), and Kahles K525i 5-25x56mm SKMR3 LSW scope.

CZ as a Starter NRL22 Option — The CZ 450-series is a solid family of .22 LR rifles, but I wanted to see what existed beyond the CZ level of rimfire rifles. One of my complaints with the CZ 455 is that the trigger leaves much to be desired even with the trigger kits available. Since the Vudoo V-22 action has a Remington 700 footprint and can accept most Rem 700-compatible triggers, I can actually run a top-tier trigger that would exceed anything available for the CZ.

Component Selection for the Ultimate NRL22 Competition Rifle
My choices in components were biased due to my prior experience — I went with quality hardware I knew and trusted…

jonathan Ocab v-22 vudoo action MPA BA Comp chassis rimfire tactical NRL22 sunday gunday Center-X 6mm creedmoor PRS

Barrel Choice — I chose the Bartlein barrel over Vudoo’s in-house Ace barrels because I run a Bartlein barrel on my 6mm Creedmoor rifle and I have become a big Bartlein fan. Secondly, I chose the Masterpiece Arms BA Competition chassis because I also run the MPA BA Comp on my 6mm Creedmoor rifle. You can see the two rifles side-by-side below:

jonathan Ocab v-22 vudoo action MPA BA Comp chassis rimfire tactical NRL22 sunday gunday Center-X 6mm creedmoor PRS
You are not seeing double. There are two rifles, both with an MPA Comp BA chassis, and both weighing about 15 pounds. In front is the featured Vudoo-action .22 LR rimfire rig with 20″ barrel, while behind is Ocab’s ARC Mausingfield 6mm Creedmoor PRS/NRL centerfire rig with 24″ barrel.

After running this rifle build for over a year now, I can say that I am more than happy with this platform as I have it configured. Having a .22 LR rifle in the same chassis as my 6mm Creedmoor rifle makes me feel right at home behind either rimfire or centerfire platform. My Vudoo V-22 weighs 15.2 lbs with Atlas CAL bipod while my 6mm Creedmoor rifle build weighs right at 15.0 lbs with the same Atlas CAL bipod. The “feel” and handling of my Vudoo V-22 MPA is as close to a centerfire gun as you can get.

Scope and Rings — I chose the 5-25x56mm Kahles K525i SKMR3 LSW because I was interested in running the Kahles after handling a few K624i and K525i scopes and hearing about how great they tracked. I run ARC M10 rings on several rifles because I think they are superbly designed.

jonathan Ocab v-22 vudoo action MPA BA Comp chassis rimfire tactical NRL22 sunday gunday Center-X 6mm creedmoor PRS

Trigger Choice — I chose the TriggerTech Diamond because I already have a TriggerTech on one of my centerfire platforms and I wanted to try their Diamond trigger on a gun.

Outstanding Accuracy with Multiple .22 LR Ammo Types — Lapua and SK
My .22 LR ammo of choice is Lapua Center-X. This is the most commonly-chosen ammunition among Vudoo V-22 shooters. I also had good results with SK Rifle Match and Lapua Midas+ in casual 50-yard and 100-yard testing but have stayed with Lapua Center-X because my rifle shot all the lots of Center-X I put into it equally well out to 200 yards.

jonathan Ocab v-22 vudoo action MPA BA Comp chassis rimfire tactical NRL22 sunday gunday Center-X 6mm creedmoor PRS

jonathan Ocab v-22 vudoo action MPA BA Comp chassis rimfire tactical NRL22 sunday gunday Center-X 6mm creedmoor PRS

SUMMARY — The Vudoo V-22 and MPA Package Is Outstanding
I can hands down recommend the Vudoo Gun Works V-22 for anyone who is interested in getting one. The “full-sized” rimfire rifle segment is not a one-horse race anymore and there are other options out there, but I feel very few will regret going with a Vudoo V-22 over another alternative. If you do not have a centerfire rifle designed for NRL/PRS style of shooting, you could probably just opt to go with a CZ 457 or Tikka T1x and have a lot of room to modify and tailor those rifles to your own tastes and still have an accurate rifle for NRL22. But if you also run a precision centerfire rifle, you should seriously consider a Vudoo V-22 or other 700-pattern rimfire action if purchasing a new .22 LR rimfire rig.

My Vudoo Gun Works V-22 build is an all-purpose gun for me. It is setup for NRL22-style matches but can be utilized for (extreme) long range .22 LR shooting (300 yards and beyond). For that rimfire ELR Game, I am seriously considering getting a Vudoo V-22S (single-shot) action to put in an F-Class stock to have a dedicated ELR .22 LR gun. While I built my Vudoo Gun Works V-22 with NRL22 in mind, I realized this gun could do more so I took it out to shoot 300 yards. After that, I stretched it out to 400 yards and then 500 yards in subsequent range visits. Now I am intrigued by extreme long range .22 LR shooting and often shoot 400 yards and beyond with the Vudoo V-22 when I can.

Long Range .22 LR Rimfire — Out to 500 Yards

Jonathan shoots his competition rifle in Long Range Rimfire matches with targets out to 500 yards. That’s definitely Extreme Long Range for the little .22 LR cartridge, requiring 27.8 MILs of up elevation! Jonathan notes: “I originally had a +30 MOA base on my rifle and it worked fine to 400 yards, but I ran out of adjustment on the K525i to get to 500 and had to hold over. I ended up getting a +40 MOA base.”

NRL22 Competition — Tactical Rimfire Matches
The NRL22 match format is a great shooting discipline. NRL22 offers a high fun factor at relatively low cost. You don’t have to reload match ammo. A couple of 50-round boxes of .22 LR ammo will get you through the match. While some people bring lots of gear to matches, that’s by choice and not by necessity. You can keep it simple and still be competitive (and win).

jonathan Ocab v-22 vudoo action MPA BA Comp chassis rimfire tactical NRL22 sunday gunday Center-X 6mm creedmoor PRS

Tips for NRL22 Competitors
I am a match director at my gun club and run our local NRL22 matches. People often ask me for tips for competing in NRL22. First, I recommend getting the course of fire for the month in advance and practicing those stages at the range. Here are other specific tips that should help NRL22 competitors improve their gun-handling and match results.

1. Dry Fire Practice — If you are not able to do live fire practice at the range, I encourage shooters to practice their shooting positions at home via dry fire. Setup props or barricades with pasters or other faux targets on a wall in the garage or inside the house and run through each stage.

2. Scope Magnification Level — The most common issue I see with newer shooters in NRL22 is the tendency to maximize their scope magnification. The timer will start, and the shooter gets into position on a target, but the scope is set to 15x or higher and the shooter can’t find the target. The shooter lowers the magnification, locates the target, and then increases the magnification again, takes the shot, transitions to another target, and repeats the process of decreasing magnification, locating target, etc. Novice NRL22 shooters should try using the mid-range magnification. Try shooting 7x-12x and learn to balance field of view and target image.

jonathan Ocab v-22 vudoo action MPA BA Comp chassis rimfire tactical NRL22 sunday gunday Center-X 6mm creedmoor PRS
The author at NRL22 Match at West End Gun Club in San Bernardino, CA.

3. Support Side Shooting — NRL22 matches often include support-side shooting stages. This requires you to shoot with your opposite (non-dominant) hand and eye. I often hear people complain about shooting support-side. My only real tip for this is to actually spend time at the range shooting this way. Practice makes perfect. It’s all a question of learning how to shoot again and using fundamentals. Learn to get a consistent cheek weld and consistent eye relief. If necessary, figure out if you need to set your scope’s diopter for your opposite eye and mark it on the scope.

4. Tripod Practice — Even though tripods are not used in the NRL22 courses of fire, I practice shooting off of a tripod often. I will often setup targets at various distances and spaced far apart to run drills firing shots on each target with the goal of speeding up transitions and target acquisitions. Target acquisition after transition from target to target is where time is lost, so it is good to become efficient in this area.

jonathan Ocab v-22 vudoo action MPA BA Comp chassis rimfire tactical NRL22 sunday gunday Center-X 6mm creedmoor PRS

Permalink - Articles, - Videos, Bullets, Brass, Ammo, Competition, Shooting Skills, Tactical No Comments »
November 22nd, 2020

Click-Adjust FL Die Systems from PMA Tool & Whidden Gunworks

click-adjustable die micro-adjusting lock ring PMA Tool Whidden Gunworks

One of the most important aspects of precision reloading is setting the shoulder bump during the full-length (FL) sizing process. You want the amount of “bump” to be precise and identical for every loaded round. However, when you switch brands of brass you may need to change the die position to get the desired bump and case body sizing. And even with the same brand of brass, you may find that you need to adjust your FL die as the number of brass load cycles increases. Brass that has been fired many times will behave differently than new or near-new brass.

Also, even with the same cartridge type, brass loaded for a semi-auto rifle may need more bump than brass fired in a bolt gun. For example, with .223 Rem ammo, you’ll normally want to push the shoulder back farther if the ammo will be shot in a AR15 as opposed to a bolt-action rig.

So how do you make all these needed adjustments for your full-length dies? You can move a conventional locking ring up and down, but that can be a tedious, trial-and-error process. Some guys use shims in one-thousandth intervals, but that still requires taking your dies in and out of the press. Well there is a better way now…

PMA Tool Micro-Die Adjuster

Wouldn’t it be great if you could precisely adjust your FL die up and down in half-thousandth increments, with a simple indexed click. That is now possible with products offered by PMA Tool and Whidden Gunworks. PMA Tool offers a Micro-Die Adjuster that replaces your existing lock ring and can be used with nearly any 7/8-14 full length sizing die. The engraved marks correspond to approximately .001″ of shoulder bump adjustment. Splitting the engraved marks is therefore approximately equal to .0005″ (half a thousandth). Users love this product, saying it adds precision and saves time.

Whidden Click-Adjustable FL Sizing Die System

Whidden Gunworks offers a complete click-adjustable FL sizer die with a special, indexed ring. With Whidden’s patent-pending Click Adjustable Sizer Die system, the die and lock ring work together to allow rapid, precise bump adjustments. One click changes the bump .001″. It’s simple and fast. Included with the Click Adjustable Sizer Die is a shoulder bump gauge. John Whidden (in video below) explains:

“There has become a need for an easier way to adjust the sizer die properly. Until now there have been few options other than trial and error to get the shoulder setback correct. Anyone who has done this can attest that it’s a slow and imprecise job! Our die and lock ring work together to give the user a clicking feel to the adjustment. Each click moves the shoulder bump .001” so you can easily find the exact shoulder bump that you desire.” — John Whidden

General Tips on Setting Up and Using Sizing Dies

Permalink - Articles, - Videos, Reloading 2 Comments »
November 22nd, 2020

CMP Announces 2021 Program for Sale of Model 1911 Pistols

CMP 1911 Pistol lottery Service Grade Field Rack application procedure

Military pistol collectors take note — you will soon be able to order classic military-issue Model 1911 pistol from the CMP. The Civilian Marksmanship Program (CMP) will begin accepting orders to purchase CMP 1911 Type Pistols at the beginning of the new year. Orders will be accepted from January 4 to March 4, 2021. NOTE: All 1911 requests must be made through the mail. No 1911s will be available in CMP stores, and no in-store orders will be accepted. For CMP 1911 Pistol Order Forms and additional INFO CLICK HERE.

The CMP’s Historic Model 1911 Handguns
In 2018, the National Defense Authorization Act granted the first transfer of 1911s to the CMP for sale and distribution. Arguably one of the most iconic handguns ever produced, the M1911 served as the standard issue handgun for the U.S. Armed Forces from 1911 to 1985. The single-action, semi-automatic pistol uses .45 ACP rounds and is comprised of a comfortable, basic design.

New orders for CMP 1911s will not be accepted before January 4, 2021, or after March 4, 2021. Any packets received or postmarked outside of those dates will be discarded. Only one CMP 1911 order form per customer per envelope may be submitted. Those who have already purchased a CMP 1911 through the CMP RGN system or the Auction site will NOT be eligible to purchase a second 1911 at this time.

CMP 1911 Pistol lottery Service Grade Field Rack application procedure

The Model 1911 Pistol — An American Classic
Designed by J.M. Browning, the M1911 is a single-action, semi-automatic, magazine-fed, recoil-operated pistol chambered for the .45 ACP cartridge. It served as the standard-issue sidearm for the United States Armed Forces from 1911 to 1986. It was widely used in World War I, World War II, the Korean War, and the Vietnam War.

CMP 1911 Pistol lottery Service Grade Field Rack application procedure

CMP 1911 Pistol Grades and Prices

Each pistol is inspected and test fired by the CMP before it is shipped. Prices for the 1911s are marked at fair market value, in accordance with CMP’s enabling legislation, at the following levels (shipping cost included):

    Service Grade, $1050: Pistol may exhibit minor pitting and wear on exterior surfaces and friction surfaces. Grips are complete with no cracks. Pistol is in issuable condition. Pistols may contain commercial parts.

    Field Grade, $950: Pistol may exhibit minor rust, pitting and wear on exterior surfaces and friction surfaces. Grips are complete with no cracks. Pistol is in issuable condition. Pistols may contain commercial parts.

    Rack Grade, $850: Pistol will exhibit rust, pitting and wear on exterior surfaces and friction surfaces. Grips may be incomplete and exhibit cracks. Pistols may require minor work to return to issuable condition but are functional. Pistols may contain commercial parts.

    Auction Grade — Sales by auction. The condition of the auction pistol will be described when posted for auction.

Selection Priority Procedures
Since these firearms are in high demand, a Random Number Generator will be utilized to provide a list of names in sequential order. Customers will be contacted in the sequence provided by the Random Number Generator. When contacted, CMP 1911 customers will select their grade of pistol (Service, Field or Rack). Customers with higher generated numbers may have fewer grades from which to choose. When the allotment of 1911s is exhausted, the remaining orders will be held in the existing sequence for all future allotments of 1911s. For questions, call CMP 1911 customer service number at 256-770-4744 or send email to: cmp1911@thecmp.org.

Background Checks Are Mandatory
As part of the CMP’s enabling legislation to supply these firearms, all customers will be subject to and must be approved by the National Instant Criminal Background Check System (NICS), conducted through the FBI, to assure eligibility to purchase prior to shipment to a required Federal Firearms License (FFL) dealer.

Permalink Gear Review, Handguns, News No Comments »