Here is the impressive T-Rex front rest from Rodzilla. In the world of front rests there have been many innovations over the past decade, but this front rest from Rodzilla really represents significant innovation. The T-Rex offers impressive capabilities that can truly take your shooting experience to the next level. Along with the T-Rex, Rodzilla also offers a lighter unit, the Raptor Front Rest, which is smaller and lighter for easier travel. The Raptor shares many of the advanced features of the T-Rex.
Review byF-Class John
At first glance the T-Rex may resemble some other coaxial front rests. The T-Rex has a joystick, three points of ground contact, and a platform for the rifle. But look closer and you’ll see this isn’t your typical rest. Designer/builder Rod Brakhage (the Rod in Rodzilla) has started from the ground up to create the most user-friendly, match-ready, modular front rest on the market. T-Rex MSRP ranges from $1995.00 to $2305.00 depending on options.
The T-Rex weighs just over 21 pounds — about the same as many mid-sized rests. However the T-Rex has a large footprint, rivaling the largest rests on the market. Rod tells us: “The T-Rex has a similar footprint to the SEB MAX… 12.5″ wide X 11.25″ front to back. However, at just over 21 lbs. my rest weighs less than a SEB NEO.” This combination (wide base with moderate weight) allows for an incredibly stable platform that is still quite portable.
Rugged Carry Case Makes Transport Easy
Rodzilla delivers the T-Rex in a custom-designed hard carry case that fits it perfectly and still has room for additional feet and accessories. This sturdy case makes taking the T-Rex to matches easy. The case is strong enough that I can stack things on top of it in my truck. One side note, if you plan on storing your rest in the case between matches, it’s wise to put a desiccant pack in the case to absorb moisture.
The T-Rex boasts an adjustable joystick that extends from 15.5″ to 21″ in length. With this adjustability, no matter what your stock length or design, you can find a comfortable position without having to stretch uncomfortably. And you won’t have to shop for a joystick extension.
Using the T-Rex is a pure pleasure when shooting prone F-Class or from the bench. That’s because of its revolutionary ability to make large vertical adjustments without getting out of position. This is accomplished with a detachable arm/handle you can actuate while behind the gun. (This is the long T-handle on the right side of the rest).
The simplest way to show why this is a game changer is to consider when you’ve just left the 800-yard line during a match. You head up to the 900-yard line, get all set up, the range officer calls a hot line and suddenly realize you didn’t adjust your elevation for the new yardage. Normally you’d have to turn your scope dials then get up from your position to adjust your front rest, or at best stretch uncomfortably in hopes of reaching your rest adjustments. With the T-Rex, you simply turn the right-side gross elevation handle while still in position, move to your new hold point, and begin firing.
This same principal applies to other situations that require adjusting vertical without breaking your shooting position. All of this is accomplished in conjunction with an incredibly sensitive, yet easy-to-adjust counterbalance system. Once set, the counterbalance ensures that smooth and fluid motion occurs in any direction without any resistance or fear of backlash that might affect your shots.
Very Wide Horizontal Range is Useful in Matches
When it comes to looking downrange, the T-Rex can deliver nearly twice the range of horizontal motion as that of some other rests. (In high ratio mode, there is about 70 MOA of horizontal travel.) This means you can quickly scan a wide expanse of targets/flags without having to change magnification or go to your spotting scope. The huge field of view is a great help when shooting in a condition that is switching and you want to view targets on either side.
Rodzilla offers a number of options for the T-Rex. The first choice is the top. Select the Rodzilla 5-Axis roller top or the new 5-Axis IBS-legal sandbag top. Or, if your budget permits, you can order both — they are easily interchangeable in minutes. The video below shows the easy top-swap procedure:
This video explains how to exchange tops on the Rodzilla T-Rex
5-Axis Top Advantages
Rod Brakhage tells us: “This innovative new 5-Axis top rotates independently of the base plate so no matter how the rest is set on the line you only need to move your rear bag to pan across the row of targets with no binding of the rifle. Also, the sides of the rifle run against vertical Delrin rollers.”
Color Choices for Rodzilla T-Rex Base
In addition to the choice of tops, there are four (4) standard colors on the website, but for an additional fee you can have it made in just about any color you want, which is pretty cool.
Choose Standard Feet, Sand Feet, or Both
When you order a T-Rex, you can choose standard bench feet or large, gorgeous sand/dirt feet. Or order them both, as I did. I use the bench feet at my regular club where I shoot from wood and concrete platforms, but the sand feet are great for matches held on dirt, gravel, sand, or grass. These sand feet provide an incredibly stable platform on the ground.
Linear Bearings Allow Ultra-Smooth and Precise Adjustments
Rodzilla’s Rod Brakhage is a smart, innovative designer committed to improving the shooter’s experience. One of Rod’s key innovations in the T-Rex is the use of linear ball bearings for both X and Y axis: “The horizontal/vertical assembly, or X-Y block, moves on 6 double-sealed ball bearings that travel on hardened shafts for effortless movement”.* This system delivers a smooth, fluidity of movement that lets you aim quickly and efficiently. Gone are the days of having to move PAST your aim point and then come back (to get the aim right), or resetting your joystick position after every shot. With the T-Rex, you make one smooth, precise move and your aim is set. And it stays set after the shot.
The T-Rex allows you to position your crosshairs with pinpoint precision every time and if you need to move them just a hair, you can do it with ease. In F-Class, we often hold between the target’s scoring lines to correct for wind variations (without touching the scope’s windage knob). With the T-Rex, I could make those holds quickly and precisely without wasting time bouncing back and forth.
Overall, I’ve come to really enjoy the repeatable confidence the T-Rex has given me whether I’m doing load development, practicing at the range, or shooting a match. So, if you’re in the market for a superb front rest that just might give you an edge or, at minimum, make your life easier, head over to TheRodzilla.com and learn all about the impressive, T-Rex Front Rest.
* Rod Brakhage explains: “The bridge travels up and down on double-sealed ball bearings on 1” hardened shafts. My design utilizes a rack and pinion with an 18″-long drive shaft for adjusting the height of the bridge. This system allows you to stay in shooting position and looking through the scope while adjusting the vertical placement of your crosshairs. Precisely dial your vertical to the center of your target with the joy stick at the exact height you prefer. A 1/4 MOA movement is very easy to accomplish with this design. Also, there is no need to lock the bridge as there is an adjustable clutch to hold the vertical position. The long drive shaft utilizes a scalloped hand wheel on the shooters side and a quick coupling adapter on the rest side. Once adjusted you merely pull back on the drive shaft and remove it or just set it on your shooting mat out of the way. The geared rack and pinion can be placed on the right for right-handed shooters or on the left.”
Share the post "Impressive T-Rex Front Rest from Rodzilla — Full Review"
You have to admire someone with serious do-it-yourself skills. Not just hammer and nail skills, but formidable design and fabrication skills. Well Forum Member Dave D. (aka “AKShooter”) has a DIY skill set that might put some trained machinists to shame. You see, “DIY Dave” crafted his own pedestal front rest from scratch, using his own design and about $100.00 in materials (not counting the Edgewood front bag). Dave estimates he put 20 hours of labor into the project, but the end result was worth it: “This Do-It-Yourself rest drives like a dream. I’ve played with the Caldwell and a Sinclair, they have nothing on this one.”
Dave tells us: “Here is my Do-It-Yourself front rest. I wanted to show other folks who are handy that a solid front rest is doable with a bit of time — and you don’t need to spend $1000.00. (You could say this is a design for shooters with more time than money.) This is for F-Class. I was originally overwhelmed by the equipment needed, so I decided to make my own rest. I didn’t have the money for a SEB or Farley Coaxial. This is what I’ll run this season (my second as an F-Class competitor).”
We asked Dave what equipment was used to make the rest. He explained: “My brother has a CNC cutter. But most water-jet outfits would do the work for $100 or less. All the plates are tapped and screwed. I found small machine screws on eBay.” Dave says there are other ways to build a front rest: “You could do the same with a welder and plate stock for base. It’s easier to do the top out of aluminum though, with all the tapping.”
Dave enjoys fabricating his own gear, but he admits the process can be time-consuming: “I’m a DIY guy. Sometimes I wrap up a project and wonder why the heck I just spent X amount of time on it.” Dave has other projects in the works: “Another option we are making for a friend is taking a cheap front rest and bolting to a 3/4″ thick, wide MDF base and adding additional adjustment screws. The hardware store is your friend!”
On the competition front, Dave is tuning up a 6mm Dasher: “My rifle last year was a .260 Rem Savage repeater. I was about middle of the pack in my group of shooters. Just went with unsorted Bergers and Lapua brass, and had a ton of fun. Now I’m in — hook, line, and sinker. I have an unfired 6 Dasher barreled action from the folks at Kelbly’s to break in. I’m cheap, so I ended up with a Do-It-Yourself stock for the Dasher.” Hopefully Dave will send us a photo of his DIY-stocked Dasher when the gun is dialed-in and “ready to rumble”.
Share the post "Brilliant DIY Effort — Forum Member Crafts His Own Front Rest"
Meet the new T-Rex front rest from Rodzilla. In the world of front rests there have been many innovations over the past decade, but this new front rest from Rodzilla really represents significant innovation. The new T-Rex offers impressive capabilities that can truly take your shooting experience to the next level.
At first glance the new T-Rex may resemble some other coaxial front rests. The T-Rex has a joystick, three points of ground contact, and a platform for the rifle. But look closer and you’ll see this isn’t your typical rest. Designer/builder Rod Brakhage (the Rod in Rodzilla) has started from the ground up to create the most user-friendly, match-ready, modular front rest on the market. The new T-Rex is already in high demand, but currently Rodzilla has been fulfilling orders in about 8 weeks. T-Rex MSRP ranges from $1895.00 to $2305.00 depending on options.
The T-Rex weighs just over 21 pounds — about the same as many mid-sized rests. However the T-Rex has a large footprint, rivaling the largest rests on the market. Rod tells us: “The T-Rex has a similar footprint to the SEB MAX… 12.5″ wide X 11.25″ front to back. However, at just over 21 lbs. my rest weighs less than a SEB NEO.” This combination (wide base with moderate weight) allows for an incredibly stable platform that is still quite portable.
Rugged Carry Case Makes Transport Easy
Rodzilla delivers the T-Rex in a custom-designed hard carry case that fits it perfectly and still has room for additional feet and accessories. This sturdy case makes taking the T-Rex to matches easy. The case is strong enough that I can stack things on top of it in my truck. One side note, if you plan on storing your rest in the case between matches, it’s wise to put a desiccant pack in the case to absorb moisture.
The T-Rex boasts an adjustable joystick that extends from 15.5″ to 21″ in length. With this adjustability, no matter what your stock length or design, you can find a comfortable position without having to stretch uncomfortably. And you won’t have to shop for a joystick extension.
Using the T-Rex is a pure pleasure when shooting prone F-Class or from the bench. That’s because of its revolutionary ability to make large vertical adjustments without getting out of position. This is accomplished with a detachable arm/handle you can actuate while behind the gun. (This is the long T-handle on the right side of the rest).
The simplest way to show why this is a game changer is to consider when you’ve just left the 800-yard line during a match. You head up to the 900-yard line, get all set up, the range officer calls a hot line and suddenly realize you didn’t adjust your elevation for the new yardage. Normally you’d have to turn your scope dials then get up from your position to adjust your front rest, or at best stretch uncomfortably in hopes of reaching your rest adjustments. With the T-Rex, you simply turn the right-side gross elevation handle while still in position, move to your new hold point, and begin firing.
This same principal applies to other situations that require adjusting vertical without breaking your shooting position. All of this is accomplished in conjunction with an incredibly sensitive, yet easy-to-adjust counterbalance system. Once set, the counterbalance ensures that smooth and fluid motion occurs in any direction without any resistance or fear of backlash that might affect your shots.
Very Wide Horizontal Range is Useful in Matches
When it comes to looking downrange, the T-Rex can deliver nearly twice the range of horizontal motion as that of some other rests. (In high ratio mode, there is about 70 MOA of horizontal travel.) This means you can quickly scan a wide expanse of targets/flags without having to change magnification or go to your spotting scope. The huge field of view is a great help when shooting in a condition that is switching and you want to view targets on either side.
Rodzilla offers a number of options for the T-Rex. The first choice is the top. Select the Rodzilla 5-Axis roller top or the new 5-Axis IBS-legal sandbag top. Or, if your budget permits, you can order both — they are easily interchangeable in minutes. The video below shows the easy top-swap procedure:
This video explains how to exchange tops on the Rodzilla T-Rex
5-Axis Top Advantages
Rod Brakhage tells us: “This innovative new 5-Axis top rotates independently of the base plate so no matter how the rest is set on the line you only need to move your rear bag to pan across the row of targets with no binding of the rifle. Also, the sides of the rifle run against vertical Delrin rollers.”
Color Choices for Rodzilla T-Rex Base
In addition to the choice of tops, there are four (4) standard colors on the website, but for an additional fee you can have it made in just about any color you want, which is pretty cool.
Choose Standard Feet, Sand Feet, or Both
When you order a T-Rex, you can choose standard bench feet or large, gorgeous sand/dirt feet. Or order them both, as I did. I use the bench feet at my regular club where I shoot from wood and concrete platforms, but the sand feet are great for matches held on dirt, gravel, sand, or grass. These sand feet provide an incredibly stable platform on the ground.
Linear Bearings Allow Ultra-Smooth and Precise Adjustments
Rodzilla’s Rod Brakhage is a smart, innovative designer committed to improving the shooter’s experience. One of Rod’s key innovations in the T-Rex is the use of linear ball bearings for both X and Y axis: “The horizontal/vertical assembly, or X-Y block, moves on 6 double-sealed ball bearings that travel on hardened shafts for effortless movement”.* This system delivers a smooth, fluidity of movement that lets you aim quickly and efficiently. Gone are the days of having to move PAST your aim point and then come back (to get the aim right), or resetting your joystick position after every shot. With the T-Rex, you make one smooth, precise move and your aim is set. And it stays set after the shot.
The T-Rex allows you to position your crosshairs with pinpoint precision every time and if you need to move them just a hair, you can do it with ease. In F-Class, we often hold between the target’s scoring lines to correct for wind variations (without touching the scope’s windage knob). With the T-Rex, I could make those holds quickly and precisely without wasting time bouncing back and forth.
Overall, I’ve come to really enjoy the repeatable confidence the T-Rex has given me whether I’m doing load development, practicing at the range, or shooting a match. So, if you’re in the market for a superb front rest that just might give you an edge or, at minimum, make your life easier, head over to TheRodzilla.com and learn all about the impressive, new T-Rex Front Rest.
* Rod Brakhage explains: “The bridge travels up and down on double-sealed ball bearings on 1” hardened shafts. My design utilizes a rack and pinion with an 18″-long drive shaft for adjusting the height of the bridge. This system allows you to stay in shooting position and looking through the scope while adjusting the vertical placement of your crosshairs. Precisely dial your vertical to the center of your target with the joy stick at the exact height you prefer. A 1/4 MOA movement is very easy to accomplish with this design. Also, there is no need to lock the bridge as there is an adjustable clutch to hold the vertical position. The long drive shaft utilizes a scalloped hand wheel on the shooters side and a quick coupling adapter on the rest side. Once adjusted you merely pull back on the drive shaft and remove it or just set it on your shooting mat out of the way. The geared rack and pinion can be placed on the right for right-handed shooters or on the left.”
Share the post "Rodzilla’s Impressive New T-Rex Front Rest — Product Review"
Sebastian Lambang of SEBrests.com has done it again. He’s taken his very successful SEB Mini front tripod rest, and made it even better, with multiple enhancements. He calls the enhanced front rest the SEB “Mini-X”. This new Mini-X has some very impressive features, including a new, improved top bag and new tilt-adjustable fittings on the legs. The new Mini-X is currently featured on Seb’s Facebook Page
On the end of each legs are angle adjustments, which Seb calls an “ankle”. This allows the foot-pads to remain flat on uneven (non-level) ground. Each foot adjusts separately using a locking lever. You can adjust the angle and height in seconds using the blue locking lever and blue height adjustment wheel. See adjustment process in animated GIF photo below left:
New Configurable Side-Plate Design
For the new Mini-X, Seb changed the design of the side plates securing the sandbag: “The plates can be adjusted so the user can rotate the thin outer side plate to place the tension screw on either the lower or higher position. The old one is on the lower position. This screw height placement can make a difference on the side bag’s tension. The higher position would keep the stock in place — not moving up during recoil. In F-Class that is OK. People can use the lower holes for Benchrest Competitions.” Seb says the new-design side plates also have smoother, rounded edges.
Seb tells us the new Mini-X weighs 5.5kg (12.1 pounds) with sandbag empty. That makes it much easier to carry/transport that some heavy front rests.
Here are the new SEB Mini-X and standard Mini side-by-side. In the middle, you can see the new Mini-X side-plate with multiple holes for tension screw.
Standard Mini Rest Improvements
The original SEB Mini rest also has some enhancements for 2021. A new bag is available, and the height adjustment screws are now angled 10 degrees. This allows the adjustment shaft to be more vertical (straight up and down). That should make the height adjustments work more smoothly and adapt better to uneven ground. Here are recent photos from the factory. Note how the sandbag is lower in the center. This is designed to prevent the center “hump” that can form over time in conventional bags. A hump in the middle can prevent the stock from riding evenly, which can, in turn, allow rocking. This new bag should provide a better engagement on the sides of a flat-bottomed competition stock. We also expect improved tracking. F-Class bag is shown. There is also a benchrest bag version.
Share the post "New SEB Mini-X Front Rest — Impressive New Features"
Introducing the Hybrid-X Shooting Rest
The new, patent-pending Hybrid-X front rest from 21st Century Shooting is a true hybrid between a joystick and a traditional “wheel” rest. Windage (left/right point of aim) changes are made via a control stick that extends back to the shooter. This control stick travels on a horizontal plane. Elevation is controlled through a knob on the end of the control stick, OR a large, traditional wheel on the post. So you have TWO elevation control options — the Big Wheel or the smaller knob on the end of the control rod.
The entire central assembly of the rest is mounted on a circular plate that is mounted in the base plate. This central assembly and plate is called the Target Acquisition System or “T.A.S”. This allows the user to easily self-align the rifle and rear bag by simply loosening a few levers. Self-alignment will help minimize set-up time and improve repeatability by eliminating binding of the rifle in the shooting bags. In addition, this will allow for rapid windage adjustment if needed to acquire a target. This really is an important advancement — you can simply place the rest on bench or ground, and then use the T.A.S. function to get perfect target alignment. No more trial and error placing the rest multiple times to get the correct orientation to the target.
The Hybrid-X design team tells us: “Smooth operation and ease of control are what this rest represents. The utilization of a ball screw plus bearing block provides glass-smooth elevation adjustment. And the elevation is stable.” Guys, this is important. Unlike some joystick rests which move when you release the joystick, on the Hybrid-X, the cradle holding your rifle does not “droop” when you release the Hybrid-X control stick. Repeatability from shot to shot is provided by the rock-solid platform and the fact that elevation does NOT change when you let go of the control stick.
The entire center section of the rest rotates as one unit for fast, perfect alignment to target.
Key Features of New Hybrid-X Shooting Rest
1. Weight of rifle is not a factor in ease of controls due to the use of ball screws/bearing blocks in the post.
2. Windage range is more than you would ever need — more than other rests on the market.
3. Elevation is not lost from shot to shot even if you release control stick.
4. Total weight of Hybrid-X prototype is 28 pounds.
5. Designed, machined and built in the USA!
How does it work? Very well indeed! The folks at 21st Century report: “Everyone that has shot off this rest so far is blown away with the repeatability, smoothness, and the ease of the controls.” The innovative Hybrid-X rest is Patent Pending, and is 100% made in the USA. Priced at $1950.00, the Hybrid-X is in production now. You won’t see it (yet) on the 21st Century website, but you can email or call (260) 273-9909 to order. Currently, expect a 60-day wait from time of order to delivery. The rest includes a front bag.
Field Test of New 21st Century Rest in Competition
Report from F-Class Competitor Bret Solomon
I would like to first start out by saying “Thank You” to all the persons involved at 21st Century Shooting for getting me this new rest. I used the new rest for the first time on Friday, August 7, 2020 for a team match in The Michigan State Long Range Team Match Championship. My team took first in the F-Open Division and I had a very quick learning curve with the rest. Saturday, I again used the rest for the Michigan Long Range/F-Class Regional individual matches. We shot one match and called the rest of the day due to weather concerns. Sunday we came back for three matches.
As the day progressed, the winds came up and starting switching considerably more and I put the new rest to work. I was able to concentrate on wind switches, feeling very confident that the gun was staying where I put it in the rest and on target. Adjustments were very smooth and I was able to shoot multiple shots with no elevation changes. The controls are in a position where you can get behind the gun and not have to reach out for changes. Yes the rest performed great — I was able to come from behind to take a one-point win in the F-Open Division. I believe the new rest from 21st Century Shooting made a significant difference for me. In the future, I hope the Hybrid-X rest will help advance my shooting game.
Once again, thank you to 21st Century Shooting for a great addition of technology, innovation, craftsmanship, and customer service to the shooting community. — Bret Solomon
Share the post "New Hybrid-X Front Rest from 21st Century Shooting"
You have to admire someone with serious do-it-yourself skills. Not just hammer and nail skills, but formidable design and fabrication skills. Well Forum Member Dave D. (aka “AKShooter”) has a DIY skill set that might put some trained machinists to shame. You see, “DIY Dave” crafted his own pedestal front rest from scratch, using his own design and about $100.00 in materials (not counting the Edgewood front bag). Dave estimates he put 20 hours of labor into the project, but the end result was worth it: “This Do-It-Yourself rest drives like a dream. I’ve played with the Caldwell and a Sinclair, they have nothing on this one.”
Dave tells us: “Here is my Do-It-Yourself front rest. I wanted to show other folks who are handy that a solid front rest is doable with a bit of time — and you don’t need to spend $1000.00. (You could say this is a design for shooters with more time than money.) This is for F-Class. I was originally overwhelmed by the equipment needed, so I decided to make my own rest. I didn’t have the money for a SEB or Farley Coaxial. This is what I’ll run this season (my second as an F-Class competitor).”
We asked Dave what equipment was used to make the rest. He explained: “My brother has a CNC cutter. But most water-jet outfits would do the work for $100 or less. All the plates are tapped and screwed. I found small machine screws on eBay.” Dave says there are other ways to build a front rest: “You could do the same with a welder and plate stock for base. It’s easier to do the top out of aluminum though, with all the tapping.”
Dave enjoys fabricating his own gear, but he admits the process can be time-consuming: “I’m a DIY guy. Sometimes I wrap up a project and wonder why the heck I just spent X amount of time on it.” Dave has other projects in the works: “Another option we are making for a friend is taking a cheap front rest and bolting to a 3/4″ thick, wide MDF base and adding additional adjustment screws. The hardware store is your friend!”
On the competition front, Dave is tuning up a 6mm Dasher: “My rifle last year was a .260 Rem Savage repeater. I was about middle of the pack in my group of shooters. Just went with unsorted Bergers and Lapua brass, and had a ton of fun. Now I’m in — hook, line, and sinker. I have an unfired 6 Dasher barreled action from the folks at Kelbly’s to break in. I’m cheap, so I ended up with a Do-It-Yourself stock for the Dasher.” Hopefully Dave will send us a photo of his DIY-stocked Dasher when the gun is dialed-in and “ready to rumble”.
Share the post "DIY Brilliance — Forum Member Builds His Own Front Rest"
Army of Minis getting ready to conquer the world (well at least the world of shooting).
The Minis are Coming! The Minis are Coming!
Good new for fans of the SEB Mini coaxial tripod rest. This superb compact joystick rest has been in high demand, creating a long waiting period. Now scores of bright new Minis are being readied for shipment to the USA, Canada, and other nations. On Monday, July 13, Sebastian (“Seb”) Lambang posted a Facebook photo of Minis getting ready to ship. That inspired scores of “likes” from Seb’s Facebook fans including action-maker Jim Borden and past F-Class National Champ James Crofts. Larry Bartholome, another former F-Class Champion, wrote: “Hey SEB — people are looking forward to more Mini Mondays!”
Sebastian (“Seb”) Lambang’s SEBRests.com team is shipping these out worldwide to meet demand. The great thing about the Mini is that it folds up into a small package, making it much easier to transport than a conventional coaxial front rest such as the Seb NEO or Farley.
Responding to Seb’s Facebook post, Todd Banks posted this photo with the comment “Love my Mini!”:
SEB Mini in Action at Berger Southwest Nationals
Even though the Mini is compact and relatively light weight, it is very stable and gives up very little in performance to a full-sized joystick front rest such as the SEB NEO. Our Systems Admin Jay Christopherson uses a SEB Mini. In the 2017 Berger SWN, Jay finished Second in F-Open Class just one point behind winner David Gosnell, thereby proving the SEB Mini is “competition ready”. Jay reports: “I’m glad I had the SEB Mini — it worked great and was much easier to transport and carry from position to position.” Here’s Jay using the SEB Mini to drill a string of Xs with his .284 Winchester F-Open rifle.
Carry Bag for SEB Mini
With the success of the SEB Mini, Seb Lambang has designed some accessories. Here is a prototype carry package, the Mini Transporter. This compact bag will hold a Mini even with big F-Class feet attached.
Share the post "SEB Mini Front Rests Are On Their Way to the USA…"
You probably know the name Protektor Model for quality front and rear bags. The Protektor DR rear bag is extremely stable, making it the choice of many top Benchrest and F-Class shooters. But guess what — Protektor makes more than leather products now.
Protektor recently introduced a slingshot-style aluminum front rest, and it looks impressive. It is offered with standard top for $195.00. The deluxe version with Windage-adjustable top costs $295.00. Both versions have an adjustable fore-end stop and nice big Mariners Wheel for elevation control. The deluxe windage-top version, shown below, also comes with a bubble level.
The Windage-adjustable version is shown above (as well as in top photo). The left-right Windage is controlled with a simple knob that spins a shaft on the left side of the top. Height adjusts from 4-7/8″ to 7″ via the nicely-crafted Mariners Wheel. NOTE: The black triangular base is a third-part item, NOT part of the rest. Also the $295.00 price does NOT include front bag, which is sold separately. A deluxe Protektor square-ear front bag for 3″ forearms costs $43.00.
Basic Protektor Aluminum Rest is $195.00
Shown below is the basic Protektor rest, a good value at just $195.00 (rest only — no bag). This includes a machined aluminum top, large Mariners Wheel, and adjustable feet. This has a 7.75″ x 14″ footprint and weighs 5.65 lbs without sand-bag. That makes it pretty easy to carry around — a plus for varminters. The rest top fits standard-sized Protektor bags, which, as filled, take the total weight to about seven pounds.
Share the post "New Protektor Model Aluminum Front Rest — Made in USA"
We like Do-It-Yourself (DIY) projects. It takes initiative, creativity, and dedication to make your own hardware, and that’s worth acknowledging. For you dedicated DIY guys, here’s a great project that should inspire. Here is an owner designed and crafted F-Open rig, complete with home-built, belt-drive front rest.
Some of our mechanically-skilled readers chamber their own barrels or bed their own stocks. But these are relatively simple tasks compared to the jobs of constructing an entire rifle plus building an advanced front rest from scratch. Well that’s exactly what Forum member Steve B. (aka Essexboy) did a couple seasons back. He built his own rifle and an impressive twin-belt-drive pedestal rest. (Click photo below for large version). And get this, Steve’s home-made rifle was victorious in its first-ever match. Steve reports: “I shot my first Comp with the rifle … and managed to win with a score of 239-21!” (The match was shot at 300/500/600/1000/1100 with English scoring of 5 points for center bullseye).
Do-It-Yourself F-Open Rig from England
Steve, who hails from Essex in the UK, constructed virtually every component of his skeleton-style rifle except the 28″ HV Bartlein barrel (chambered as a 6mm Dasher) and the Tikka 590 donor action. Steve also did all the design and fabrication work on his one-of-a-kind front rest. Steve tells us: “Over the last year or so, I made this rifle stock and rest. I managed to make it all on a little Myford Lathe, as you can tell I’m no machinist but it saved me a load of money — so far I’ve got about $200 invested plus the barrelled action. The stock is aluminum except for the stainless steel bag runner. The rifle came in at one ounce under weight limit for F-Class Open division.” Steve did get help with the chambering and barrel-fitting, but he hopes to do all the barrel work himself on his next project.
The gun is very accurate. Steve notes: “I have shot the rifle to 1100 yards and it shoots well. Last time out the rifle dropped just one point at 1000 yards and 5 points at 1100 yards [English scoring system]. I know it’s not pretty, but it got me shooting long range F-Class for peanuts.” Message to Steve: Don’t worry how it looks. As another Forum member observed: “Any rifle that shoots well at 1100 yards is beautiful….”
Steve started with a Tikka 590 action: “The whole stock was made on a small (6.5×13) lathe and a vertical slide. This caused a few head scratching moments, figuring out how to hold the T6/HE30 alloy for the milling/turning operations, but it did teach me a few things. The hardest parts were clamping the longer sections (such as the fore-end) and keeping it all square. Due to the short cross-slide travel I had to keep re-setting the parts. I managed to keep all measurements to 0.001″ (one thousandth). I’m most proud of the trigger guard (photo below). This took a full day but came out really well, even if I say so myself.”
Belt-Driven Front Rest
We’re impressed with Steve’s ingenious front rest. Steve explains: “The rest is belt-driven and still in the experimental stage — hence no powder coating or polishing yet. I may have gone over the top as the key moving parts (the pulleys) run on three (3) types of bearings: radial; reamed bush; and a ball race. The main post runs on a radial bearing and the feet even have bearings in them, so when I raise the main body up (for rough height adjustment) the foot stays static.”
Will Steve build another rifle? Steve says he will, and he’s upgraded his tools: “Since building the rifle I have acquired a bigger lathe (Harrison m250) and a milling machine. For the next project I hope to be able to do the barrel work (threading, chambering, crowning) as well.” The next gun might be another Dasher. Steve explains: “After extensive reading on AccurateShooter.com, I chose the 6mm Dasher chambering, as I have a shoulder problem and can’t shoot a rifle with a lot of recoil.”
Share the post "Home-Built F-Open Rifle and Dual-Belt-Drive Front Rest"
Our friend and product tester Joe Friedrich is the proud owner of a spectacular Pappas front rest. Built by James Pappas, this rest is used for both air rifle and rimfire benchrest matches. The fancy Pappas front rest is a shortened, front-support-only version of the Pappas one-piece rest, which is popular with rimfire benchresters. Pappas engineered this rest to comply with air rifle benchrest rules which do not allow use of integrated (one-piece) front and rear rests. The end result was a 30.8-lb masterpiece of machining. Sadly, James Pappas passed away in 2014. This beautifully-crafted rest, built in 2011, is one of the finest examples of his work — a fitting legacy.
The workmanship on this Pappas front rest is astounding. Accurately described as a “work of art” by Joe Friedrich, this rest, crafted of aircraft-grade aluminum, sets new standards for “Benchrest BLING”. It looks like it should be on display in an art museum. Nearly all components of this rest, including the adjustment controls, have been polished to a mirror finish.
Convenient Rear Windage and Elevation Controls
The Pappas front rest features separate fine-tuning controls for windage and elevation, plus a central gross-elevation control. Normally, once the rest is centered-up on the target, you can make all needed elevation and windage adjustments with the rear (fine-adjustment) controls. In the video below, Joe explains how the controls work as he practices with his modified Theoben Rapid MFR air rifle. (Note: In the last minute of the video, the back-lighting was so intensely bright that we lost detail in the foreground. We apologize for that flaw, but you can still hear the audio.)
Price for this Masterpiece? Don’t Ask…
If you are interested in getting a similar rest, visit PappasRimfireProducts.com, or call (325) 754-5771. Be forewarned — “If you need to ask about the price, you probably can’t afford it.” This is truly the “Rolls-Royce” of front rests, and it will be priced accordingly.
Share the post "Benchrest Bling — The Pappas Front Rest for Rimfire BR"
You have to admire someone with serious do-it-yourself skills. Not just hammer and nail skills, but formidable design and fabrication skills. Well Forum Member Dave D. (aka “AKShooter”) has a DIY skill set that might put some trained machinists to shame. You see, “DIY Dave” crafted his own pedestal front rest from scratch, using his own design and about $100.00 in materials (not counting the Edgewood front bag). Dave estimates he put 20 hours of labor into the project, but the end result was worth it: “This Do-It-Yourself rest drives like a dream. I’ve played with the Caldwell and a Sinclair, they have nothing on this one.”
Dave tells us: “Here is my Do-It-Yourself front rest. I wanted to show other folks who are handy that a solid front rest is doable with a bit of time — and you don’t need to spend $1000.00. (You could say this is a design for shooters with more time than money.) This is for F-Class. I was originally overwhelmed by the equipment needed, so I decided to make my own rest. I didn’t have the money for a SEB or Farley Coaxial. This is what I’ll run this season (my second as an F-Class competitor).”
Do-It-Yourself Joystick Rest — Jeff’s Labor of Love
Quite a few competitors chamber their own barrels, and a few construct their own stocks. But Jeff Godfrey takes the prize for do-it-yourself audacity — he built his own co-axial front rest from scratch. Sam Hall provides this report:
“Jeff, one of Piedmont Gun Club’s regulars, is a talented fabricator. He made one of the smoothest joystick rests that I have ever laid my hands on. Jeff’s home-built coaxial rest rivals the Farley and Seb Max. It will also handle a wide fore-end Heavy Gun. Constructing virtually every part of this rest from scratch, Jeff made his own co-axial to save money. You have to admire his ingenuity and his dedication. Jeff says it took him over 100 hours to make. He said there would be no way he could make another one for profit!”
Share the post "IBS Gear Spotlight: Home-Built Co-Axial (Joystick) Front Rest"
You have to admire someone with serious do-it-yourself skills. Not just hammer and nail skills, but formidable design and fabrication skills. Well Forum Member Dave D. (aka “AKShooter”) has a DIY skill set that might put some trained machinists to shame. You see, “DIY Dave” crafted his own pedestal front rest from scratch, using his own design and about $100.00 in materials (not counting the Edgewood front bag). Dave estimates he put 20 hours of labor into the project, but the end result was worth it: “This Do-It-Yourself rest drives like a dream. I’ve played with the Caldwell and a Sinclair, they have nothing on this one.”
The gun is very accurate. Steve notes: “I have shot the rifle to 1100 yards and it shoots well. Last time out the rifle dropped just one point at 1000 yards and 5 points at 1100 yards [English scoring system]. I know it’s not pretty, but it got me shooting long range F-Class for peanuts.” Message to Steve: Don’t worry how it looks. As another Forum member observed: “Any rifle that shoots well at 1100 yards is beautiful….”
Do-It-Yourself Joystick Rest — Jeff’s Labor of Love
