When neck-turning cases, it’s a good idea to extend the cut slightly below the neck-shoulder junction. This helps keep neck tension more uniform after repeated firings, by preventing a build-up of brass where the neck meets the shoulder. One of our Forum members, Craig from Ireland, a self-declared “neck-turning novice”, was having some problems turning brass for his 20 Tactical cases. He was correctly attempting to continue the cut slightly past the neck-shoulder junction, but he was concerned that brass was being removed too far down the shoulder.
Craig writes: “Everywhere I have read about neck turning, [it says] you need to cut slightly into the neck/shoulder junction to stop doughnutting. I completely understand this but I cant seem to get my neck-turning tool set-up to just touch the neck/shoulder junction. It either just doesn’t touch [the shoulder] or cuts nearly the whole shoulder and that just looks very messy. No matter how I adjust the mandrel to set how far down the neck it cuts, it either doesn’t touch it or it cuts far too much. I think it may relate to the bevel on the cutter in my neck-turning tool…”
Looking at Craig’s pictures, we’d agree that he didn’t need to cut so far down into the shoulder. There is a simple solution for this situation. Craig is using a neck-turning tool with a rather shallow cutter bevel angle. This 20-degree angle is set up as “universal geometry” that will work with any shoulder angle. Unfortunately, as you work the cutter down the neck, a shallow angled-cutter tip such as this will remove brass fairly far down. You only want to extend the cut about 1/32 of an inch past the neck-shoulder junction. This is enough to eliminate brass build-up at the base of the neck that can cause doughnuts to form.
The answer here is simply to use a cutter tip with a wider angle — 30 to 40 degrees. The cutter for the K&M neck-turning tool (above) has a shorter bevel that better matches a 30° shoulder. There is also a 40° tip available. PMA Tool and 21st Century Shooting also offer carbide cutters with a variety of bevel angles to exactly match your case shoulder angle*. WalkerTexasRanger reports: “I went to a 40-degree cutter head just to address this same issue, and I have been much happier with the results. The 40-degree heads are available from Sinclair Int’l for $15 or so.” Forum Member CBonner concurs: “I had the same problem with my 7WSM… The 40-degree cutter was the answer.” Below is Sinclair’s 40° Cutter for its NT-series neck-turning tools. Item NT3140, this 40° Cutter sells for $14.99. For the same price, Sinclair also sells the conventional 30° Cutter, item NT3100.
Al Nyhus has another clever solution: “The best way I’ve found to get around this problem is to get an extra shell holder and face it off .020-.025 and then run the cases into the sizing die. This will push the shoulder back .020-.025. Then you neck turn down to the ‘new’ neck/shoulder junction and simply stop there. Fireforming the cases by seating the bullets hard into the lands will blow the shoulder forward and the extra neck length you turned by having the shoulder set back will now be blended perfectly into the shoulder. The results are a case that perfectly fits the chamber and zero donuts.”
There is an excellent article about primers on the Shooting Times website. We strongly recommend you read Mysteries And Misconceptions Of The All-Important Primer, written by Allan Jones. Mr. Jones is a bona fide expert — he served as the manager of technical publications for CCI Ammunition and Speer Bullets and Jones authored three editions of the Speer Reloading Manual.
This authoritative Shooting Times article explains the fine points of primer design and construction. Jones also reveals some little-known facts about primers and he corrects common misconceptions. Here are some highlights from the article:
Size Matters
Useful Trivia — even though Small Rifle and Small Pistol primer pockets share the same depth specification, Large Rifle and Large Pistol primers do not. The standard pocket for a Large Pistol primer is somewhat shallower than its Large Rifle counterpart, specifically, 0.008 to 0.009 inch less.
Magnum Primers
There are two ways to make a Magnum primer — either use more of the standard chemical mix to provide a longer-burning flame or change the mix to one with more aggressive burn characteristics. Prior to 1989, CCI used the first option in Magnum Rifle primers. After that, we switched to a mix optimized for spherical propellants that produced a 24% increase in flame temperature and a 16% boost in gas volume.
Foiled Again
Most component primers have a little disk of paper between the anvil and the priming mix. It is called “foil paper” not because it’s made of foil but because it replaces the true metal foil used to seal early percussion caps. The reason this little disk exists is strictly a manufacturing convenience. Wet primer pellets are smaller than the inside diameter of the cup when inserted and must be compacted to achieve their proper diameter and height. Without the foil paper, the wet mix would stick to the compaction pins and jam up the assembly process.
Primer Functionality and Primer Types Compared
This video looks at a variety of primer types from multiple manufacturers, foreign and domestic. The video explains the basics of how primers function, and then explains the key characteristics of standard primers, magnum primers, and mil-spec primers (designed for semi-auto rifles).
Share the post "How Primers Work — What You Need to Know"
⏺ Act soon for $50 or $75 rebate on high-quality revolvers
Smith & Wesson Wheelgun Wonderland Rebate, Save $50 or $75
Want a great revolver? We think everyone should have at least one quality Smith & Wesson wheelgun. There’s even a rebate available — but you better act fast — today (April 30, 2024) is the last day you can make a qualifying S&W revolver purchase.
Right now you can get a significant S&W Rebate on both compact carry revolvers and full-size wheelguns. For the smaller J-Frame (with $50 rebate), we like the Model 638 with alloy frame and shielded hammer. You can also get a big $75 rebate on the bigger K-, L-, or N-frame revolvers. In .357 Magnum, we like the modern L-Frame Model 686. NOTE: To get the rebates, purchases must be made before midnight on 4/30/2024 — so don’t delay.
Smith & Wesson’s J-Frame revolvers are great carry guns. We recommend the ultra-lightweight Model 638 and Model 642 Airweight wheelguns, which each weigh under one pound (14.6 oz. empty)! We like the Model 638 because it has a shielded internal hammer, so you can shoot single-action if you wish.
Rebate Applies to Popular Rimfire Revolvers as Well
The rebate is good for a wide variety of revolvers, including popular rimfire revolvers. We have an K-frame Model 617 .22LR revolver that has shot thousands of rounds. It is very accurate, with a superb trigger. Rimfire revolvers are great for training and plinking.
NOTE: There is currently a $75 S&W Rebate available for this Model 648 K-frame revolver. Qualifying purchases must be made between February 1, 2024 and April 30, 2024.
Along with its .22 LR wheelguns, S&W now offers the Model 648 in .22 WMR (Winchester Magnum Rimfire). This stainless Model 648 brings a more powerful cartridge to S&W rimfire revolver fans. Built on S&W’s medium K-frame, the 8-round Model 648 is designed for small game hunting and target shooting. The .22 WMR is definitely a much more potent varmint cartridge than the .22 LR. You have more downrange energy plus a flatter trajectory.
Share the post "Last Day Today for Smith & Wesson Wheelgun Rebate"
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. Midsouth — Lyman Press Kit and Reloading Gear Sale
⏺ Save $100 on turret press combo kits; save $40 on Powder Dispenser
Midsouth is running a sale on Lyman Reloading Press Combo Kits, turret presses, powder dispensers and more. Lyman makes quality products and the All-American 8-station turret press is quite impressive. With this sale you save $50 on the turret press and $100 on the Ultimate Reloading System Kit.
2. Natchez — Burris Optics Blem Sale
⏺ Significant discounts on scopes, spotters, binocs and more
Do you need a good scope, binoculars, or spotting scope? Then check out the Burris Blemished Optics Sale at Natchez. If you don’t mind a minor cosmetic flaw or small scratch you can save up to 50%. Among the bargains are competition FFP zoom scopes, LRF scopes, spotting scopes, thermal monoculars, and compact binoculars. Save $900 on the impressive XTR Pro for PRS/NRL. This features a Quick Detach Race Dial and Zero Click Stop Elevation Knob. Or save $650 on the Burris Eliminator IV Laser Rangefinder scope.
3. Smith & Wesson, Wheelgun Wonderland Rebate, $50 or $75
⏺ Act soon for $50 or $75 rebate on high-quality revolvers
Right now you can get a significant S&W Rebate on both compact carry revolvers and full-size wheelguns. For the smaller J-Frame (with $50 rebate), we like the Model 638 with alloy frame and shielded hammer. You can also get a big $75 rebate on the bigger K-, L-, or N-frame revolvers. In .357 Magnum, we like the modern L-Frame Model 686. NOTE: To get the rebates, purchases must be made before midnight on 4/30/2024 — so don’t delay.
4. Palmetto SA — RUGER-5.7® 5.7×28 Pistol, $549.99
⏺ Save $350 Off MSRP for high-velocity, low recoil 5.7×28 handgun
The 5.7×28 cartridge is a modern defense round with much less perceived recoil than pistol cartridges shooting larger-diameter, 120-250gr bullets. With a 20+1 round capacity, the 5.7×28 Ruger-5.7 is a well-designed pistol with good sights. Owners report the Ruger 57 has good ergonomics, and is accurate and fun to shoot with low muzzle flip. With this sale you save $350.00 off Ruger’s $899.99 MSRP.
5. Graf & Sons — Hornady Ammunition Sale
⏺ Major savings on Hornady brand Rimfire, Centerfire Rifle, and pistol ammo
If you need ammo for a variety of cartridges check out the Hornady Ammo Sale over at Graf’s. There’s a good selection of both rifle and pistol ammunition with good deals on .204 Ruger, .243 Win, 6.5 PRC, .270 Win, and .308 Win. Plus rimfire varmint ammo is deeply discounted — e.g. Hornady 17 Mach 2 is discounted 18%, with 20 rounds just $9.65.
6. Amazon — Walker’s Razor Slim Muffs, $41.75
⏺ Very good customer reports for these NRR23 Slim Muffs
Good hearing protection is vital for preventing hearing loss over the years. A great choice is the Walker’s Digital Razor PRO Electronic Earmuffs, an Amazon Best Seller. Omnidirectional Microphones capture sounds from all directions, and Walkers quick-activated compression dampens sudden, loud noises to protect your hearing. NOTE: These $41.75 muffs require two AAA replaceable batteries. For $69.99 you can get rechargeable Walker’s Razor Slim Muffs.
7. Amazon — RCBS M1000 Balance Scale, $149.52
⏺ Good beam scale serves multiple reloading/sorting tasks
Electronic scale/dispensers are efficient. But many loading room tasks, such as bullet weight sorting, can be performed more quickly and easily with a good beam scale. In addition, a beam scale won’t experience the drift shown by some electronic scales. We think all hand-loaders should have a good mechanical scale. The RCBS M1000 mechanical scale is reliable and well-designed, offering excellent, accurate performance for the price.
8. Locked&Loaded — CCI Blazer 9mm Ammo, $219.99 1000 rds
⏺ Quality 9mm brass-cased ammo at a super-low price — $0.22/round
CCI makes very reliable pistol ammo with reloadable brass cases. Right now you can get 1000 rounds of CCI Blazer 9mm FMJ ammo for just $219.99 at LockedLoaded.com. That price works out to just $11.00 per 50-round box — a fantastic price. This very affordable 115gr Blazer 9mm ammo is excellent for practice/training, and it is more reliable than commercial reloads.
9. Amazon — KingHardCase 200rd Rifle Ammo Case, $49.99
⏺ Great high-capacity waterproof ammo transport case — three versions
Keep 200 rounds of ammo securely stored in this Waterproof Ammo Case, now $49.99 on sale. Made of high-strength ABS plastic, this 11.5″ x 9.5″ x 4.5″ ammo transport case can withstand harsh environments, resist impact, and protect against scratches. Shown above is the version that holds 200 .308 Win-sized rounds. Another model holds 200 .223 Rem rounds in the same-size case priced $39.99 on Amazon. There is also a $39.99 double-decker KingHardCase that holds 350 rounds of pistol ammo.
10. Amazon — PLANO Rifle Hard Case, $47.36
⏺ Versatile TSA-approved rifle case that can hold two rifles or shotguns
Here’s a good basic long gun transport case that will hold two rifles (without scopes) or one large scoped rifle. This 15″L x 5.15″W x 4″H Plano Double Rifle Hard Case features good foam padding and heavy duty latches. Interior dimensions are: 50.5″L x 3.75″W x 12″H. This case has padlock tabs for security and is TSA-approved for airline travel. This is a good case for the price.
As an Amazon affiliate, this site can earn revenues through sales commissions.
Share the post "BargainFinder 449: AccurateShooter’s Deals of the Week"
Every month, GunGenius.com publishes a monthly Top Selling Report listing the Top 5 Best Selling Guns for each major category of firearms sold on GunBroker.com. This culminates in a comprehensive year-end report detailing the Top Selling Firearms of the Year for all categories (rifles, pistols, shotguns). Within that report there are break-downs by type. For example there are four (4) categories of rifles: Bolt-Action, Semi-Auto, Lever Action, and Single Shot.
In today’s Bulletin article we feature the Top Ten Bolt-Action Rifles sold new on Gunbroker.com in 2023. In order, these are:
1. Ruger American Rifle
2. Remington Model 700
3. Browning X-Bolt
4. Savage 10/110
5. Savage Axis
6. CZ-USA Model 457
7. Tikka T3
8. Mossberg Patriot
9. Weatherby Vanguard
10. Winchester Model 70
BONUS: TIKKA T3x vs. Ruger American
Here are two of the Top 10 best-selling bolt-action rifles compared head-to-head. This detailed video compares the #1-selling Ruger American rifle with the #7-ranked Tikka T3x. The reviewers explain the key differences and the pros and cons of each type. The video examines the receivers, barrels, triggers, and stocks of the Tikka and the Ruger. What’s the bottom line? Well the Ruger has a price advantage, but the Tikka T3x has a better trigger, nicer action, better magazines, and probably better 5-shot accuracy.
Share the post "TOP TEN Best-Selling Bolt-Action Rifles for 2023 on Gunbroker"
Do you know someone who recently purchased his/her first handgun and is getting started in the shooting sports? Or do you need to brush up your own pistol skills? Then check out a new FREE video training series from the SIG Sauer Academy: Shooter’s Edge — Learning to Shoot.
Here is the Second Video from the Shooter’ Edge series, covering Basic Rules of Firearms Safety:
This video series features foundational handgun classes at the SIG Sauer Academy in New Hampshire. The ten-episode series takes viewers into the classroom and onto the range as the instructors walk through the fundamentals of handgun safety, shooting techniques, practice and training exercises, along with instruction in equipment options and handgun selection. The series was shot on location during several of the Academy’s introductory classes.
Click Below to Access Full Video Series on SigSauer.com:
The Shooter’ Edge Series includes the following episodes: Learn to Shoot at SIG Sauer Academy; Basic Rules of Safety; Types of Handguns and Ammunition; Foundational Shooting Techniques; How to Practice and Train Effectively; Choosing the Right Gun; Equipment and Its Purpose; Holsters — Presentation and Recovery; Magazines — Loading and Unloading; and What Happens After Learning to Shoot.
Retro is back — at least in the CMP’s Standard Modern Military Rifle AR class. Though Service Rifle competition has evolved to allow optics and heavy barrel profiles, the Standard Modern Military Rifle (AR category) is truly a “blast from the past”. Overall weight is limited to 7.5 pounds, and the rifle must be equipped with iron sights (Rule 5.2.3). In addition, the rifle must “be based on the M-16 rifle or be based on an AR design” with “exterior configuration similar [to] the original military or military-type rifle”. See Rules.
With this in mind our friend Dennis Santiago has put together his own AR-platform Standard Modern Military Rifle for matches run under CMP Games Competition Rules. This is not quite a classic AR, as it has a metal free-float handguard (vs. plastic handguards), but it IS light (7.3 pounds), and it does have iron sights — a key requirement for Standard Modern Military class rifles. CMP Rulebooks — All Classes.
Here is Santiago’s CMP Modern Military Rifle (Standard Class) with an ultralight free float tube that has a titanium barrel nut, and mechanical, center-able front sight. The barrel is an AR-Stoner brand 20″-long 1:7″ Government contour chambered in 5.56×45 NATO. Dennis says: “This makes the 7.5-lb weight limit with a few ounces to spare. We’ll see how well it drives soon enough.”
Dennis explains: “The Standard Modern Military (AR) is a category of military-style rifle that shoots the 200-yard, 30- or 50-shot courses alongside the M1 Garands, Springfields, Vintage, and M1 Carbines. This one boasts a Midwest Industries (MI) ultralight Free-float Handguard and a Yankee Hill folding front sight. Any Government contour or thinner profile rifle-length gas tube barrel with a 0.750″ gas block will work.” Colt makes a suitable Government Contour 20″-long, 1:7″-twist barrel, sold by MidwayUSA.
To test the accuracy of his rifle, Dennis fitted a Mantis-X unit on the top of the float tube. The Mantis-X records the movement of the rifle to interpolate shot placements. Dennis reports: “I spent some extra time at the range grabbing a decent zero for my Modern Military rifle. I stuck a Mantis-X on it to record a few shots shooting offhand at the plates at 200 yards. It drives very easily even with no shooting coat or glove.” The Mantis-X is attached just forward of the carry handle, on top of the MI free-float handguard. The Mantis-X works with live fire as well as dry fire. It communicates via BlueTooth to a smartphone App.
Rifle Shoots Well with 77gr Sierra MatchKings
The gun is presently zeroed with 77gr Sierra MatchKing ammunition. Dennis reports his rifle “can easily hold the X-Ring on an SR target for both 100-yard and 200-yard CMP Modern Military Games matches. And it’s fun to shoot!”
CMP Standard Modern Military Rifle (AR Class)
This rifle is built from carefully selected and fitted parts to conform to the CMP’s 7.5-pound weight limit iron-sighted rifle rule. Officially, this is a CMP Standard Modern Military Rifle, Class “A” (AR type).
1. S&W M&P lower receiver
2. White Oak Armament match upper receiver with 1/4×1/4-MOA pinned rear sights
3. AR-Stoner 20″ 1:7″-twist 5.56x45mm NATO Government contour barrel from MidwayUSA*
4. MidWest Industries ultralight free-float handguard with a Titanium barrel nut
5. Yankee Hill Machine folding front sight with a 0.072″ square front pin
6. RRA 2-stage trigger
7. A2 length buttstock
Easy Rifle Build Using Mostly Existing AR Parts, Plus New Barrel and Free-Float Handguard
Dennis was able to put his Modern Military AR together using components he had collected over the years: “Most of these parts were already in my bin of old AR parts available to be recycled. The barrel and free-float handguard were the only new acquisitions.” And with the AR’s modular format, this was an easy build: “Assembly time was about 30 minutes. I’ve done these parts swaps so many times now.”
Key Rules for Standard Modern Military Rifle (AR Type)
Dennis Santiago’s new AR rifle was built as a “Standard U.S. Modern Military Rifle”, Class A (AR Type), as specified in the CMP Games Competition Rules.
5.2.3 Standard U.S. Modern Military Rifles, Class A
Category A Standard Modern Military Rifles must comply with these requirements:
a) Rifles must be based on the M-16 rifle or be based on an AR design;
b) Rifles must be manufactured by a USA manufacturer;
c) Rifles must be equipped with issue-type metallic front and rear sights; rear sights with adjustments finer than one minute of angle are permitted;
d) Total rifle weight, with sights and without sling, may not exceed 7.5 pounds;
e) Rifles may be fitted with a float tube or free-floating handguard. A nonadjustable sling swivel may be attached to the forward end of the handguard; and…
f) The rifle must be chambered for the 5.56x45mm or .223 Remington cartridge.
Also, from Rule 5.2.2:
a) The exterior configuration of the rifle must be the similar to that of the
original military or military-type rifle;
b) The trigger pull may not be less than 4.5 lbs.;
Comments from other Modern Military Rifle Shooters:
“I built a Modern Military [Standard]. It was tough getting below the 7.5-lb [limit]. I had to carve off a bunch of the 20″ barrel diameter but wanted to stay with it for sight radius (over a 16″). I would just as soon shoot that little iron-sighted rifle at 200 yards as my 15-lb Nightforce-scoped Service Rifle. I love that little rifle.” — Kenneth S.
“I’m building one of these that will make 7.5-lb [Standard Modern Military] weight limit, with the long barrel and long sight radius. This has been on my list this winter.” — Tom K.
“We found that turning down a National Match barrel and taking a few inches off of it made a very accurate rifle.” — Jack A.
“My old (complete) A2 upper has been sitting forlorn on a shelf for a couple of years now. Perhaps I need to do a [Standard Modern Military] build of my own.” — Derek D.
Dennis Santiago replied: “Derek — that’s the reason I was attracted to this. I had bought a brand new WOA A2 pin upper receiver to make a new upper then the scope rule was adopted and it was all flat tops. This gives new purpose to the old parts.”
CMP Rules Defining Modern Military Rifles
Standard vs. Unlimited, Class A vs. Class B
There are actually two different classes of Standard Modern Military Rifles, Class A for AR-type rifles and Class B for other military-style rifles, such as the M1A and FN-FAL. Ok, got that? Now, in addition, there is also a second division for UNLIMITED Modern Military Rifles, again with two classes (Class A — AR-type and Class B — other military rifles). These unlimited rifles can have optics, heavier weights, modern-design adjustable-length stocks, and other upgrades. Here is Rule 5.2.2 from the current CMP Games Rifle and Pistol Competition Rules:
A while back, we featured a portable reloading bench built on a Black & Decker Workmate. That proved a VERY popular do-it-yourself project so we’re showing it again, in case you missed it the first time.
Texan Robert Lewis made himself a great portable reloading bench from plywood mounted to a Black & Decker Workmate. The bench, roughly 22″ x 19″ on top, folds up to fit easily in your car’s trunk or behind the seats in a pick-up truck cab. Four recessed bolts hold the wood top section to the collapsible B&D Workmate. The sides and back of the unit are attached to the base with small nails. There is a small shelf (also nailed in place) which can be used to clamp a powder measure or hold a scale. Shown in the photo is a Harrell’s Benchrest measure and Harrell’s single-stage “C” press.
Originally, the whole unit could be built for about $65.00 with pine, or $80.00 with oak (as shown). Robert explained: “The Workmate was $40. If someone bought a 2’x4′ sheet of 3/4″ oak plywood, I think it is around $30. Using pine plywood would be about half that. Fasteners were $3. Spar Urethane would be $5.” [Editor: We have seen major inflation — the Workmate is now $90+ and you’ll be spending more for the wood, so figure the whole project might be $150.00.]
Robert told us: “I used a couple ideas I found on the web. The Larry Willis website gave me the idea to use the Black and Decker Workmate as a base. I found the Workmate on sale for $40 and the top is made from oak plywood I had in my shop. I sealed the wood with three coats of Spar Urethane. The whole thing folds into a nice package for transportation to and from the range.”
NOTE: Since we first ran this story, the price of a Black & Decker Workmate WM225 has increased substantially. Amazon is currently selling WM225-A Workmates for $90.82. The next best price we found was $98.01 at Home Depot.
Want to show off some groups you’ve shot? Or keep a handy pack of mini-targets in your range kit? Then check out this unique product from stockmaker Bell & Carlson. Shoot’n Aces cards feature a 1-inch black square aiming box with a 1/2-inch inner square. These cards are normal poker-playing-card size, 3.5″ high x 2.5″ wide (89 × 64 mm). Shoot’n Aces cards come 56 to a pack. Carry a few extras in your wallet or a pack in your vehicle glove compartment and you’ll always have a precision target to shoot at the range. Cards can be stapled or taped to target stands.
Sniper Central says these cards work well as targets: “The bold square is easy to pick up with the inner white portion making a nice aiming point. The material of the cards is the same as normal playing cards and the bullets make a very nice hole when passing through.” The sharp edges of the bullet holes makes it easy to measure group sizes with precision.
Each pack of Shoot’n Aces contains 56 premium-quality target cards. If you want some, order Bell & Carlson item SA-2006. This is a set of four (4) card-packs with 56 cards per pack (224 cards total) priced at $20.00 (i.e. $5.00 per pack).
Product Tip from EdLongrange.
Share the post "Cool Deck of Target Cards — Showcase your “Wallet Groups”"
Every handloader can benefit from a turret press. This type of press features an upper rotating disk that has multiple threaded placements for dies or other tools (such as powder dispensers). There are a variety of turret presses on the market today with the remarkable Area 419 9-Station Zero Press at the top end, and the inexpensive Lee turret presses at the other end of the spectrum. In between are Lyman’s 8-station All-American turret, the Redding 7-station T-7 press, and the RCBS 6-station turret.
Today’s Saturday video showcase features notable turret presses from Area 419, Lyman, Redding, and RCBS. We lead off with a feature on the advanced Area 419 ZERO 9-station turret.
Area 419 ZERO 9-Station Turret Reloading Press — Without Peer
Area 419’s impressive ZERO reloading press is a 9-station turret press with some very unique features. This press was designed to be the most precise turret ever created. As tested by Gavin Gear of UltimateReloader.com, the ZERO turret press delivered very impressive shoulder-bump consistency and ultra-low seated bullet run-out (about +/- 0.0005″). The numbers were as good as you can get from a quality single-stage press, so Area 419 did some impressive engineering. We would expect that, as this represents a big investment — MSRP is $1275.00. SEE FULL REVIEW on UltimateReloader.com.
The ZERO turret press lets you install up to nine (9) different reloading dies in the large top turret, which revolves around a central axis. But unlike most turret presses, the ZERO doesn’t have flex or wobble when you’re loading. This is because Area 419 includes a clever system for locking the turret in position after you’ve selected the die from your array.
Lyman Brass Smith All-American 8-Station Turret Press
The 8-station Lyman Brass-Smith All-American Turret Press is an impressive product. Since its introduction in 2018, Lyman’s All-American 8 has become popular with handloaders. With a $227.50 street price at MidwayUSA, the 8-station Lyman is $148 cheaper than the $375.49 7-station Redding T-7 (current Amazon price). No question, that’s a significant price advantage, which has helped Lyman grab turret press sales from Redding.
More Stations Provide More Reloading Options
Gavin liked having 8 stations, because this offers more flexibility. With eight stations, you can have four two-die sets, or three two-die sets plus a dedicated decapping die and a powder measure. Gavin notes: “I’ve owned many reloading presses, including 3-station, 4-station, 5-station, and 7-station variants, but I’ve never owned an 8-station press until the Brass-Smith All-American 8 came to the shop. I’ll have to say… you can’t get too many stations, especially on a manually-indexed turret. I love the idea that you can leave dies on the press, and load multiple calibers/chamberings using the same turret setup.”
Redding T-7 Turret Press Overview
The Redding T-7 has long been a leading turret press for precision handloaders. It offers one more station than the other “green” turret press offered by RCBS. It has a reliable optional priming system and plenty of leverage. We like the build quality of the Redding T-7, but it is now significantly more expensive than the Lyman turret, which has one more station. See a comparison of the Redding T-7 and Lyman 8-station turret press in the next video.
8 vs. 7 Stations — Lyman Turret and Redding T-7 Comparison
If you’re considering acquiring a turret press, it helps to compare products side by side. Here is an interesting comparison video showcasing the Redding T-7 and the Lyman 8-station turret press. This video offers a side-by-side comparison of the Redding turret and the Lyman turret, showing how each performs key functions.
RCBS Six-Station Turret Press
This Editor has used an RCBS Turret Press for over 15 years. It does not have the most stations or the most sophisticated features, but it has proven very reliable over the years. I use it primarily to use with pistol sizing and seating dies. Having six stations allows me to load multiple cartridge types: 9x19mm, .357 Magnum, and .45 ACP. READ FULL REVIEW on UltimateReloader.com.
Creedmoor Enhanced Turret Heads for Redding, Lyman, RCBS
Creedmoor Sports offers enhanced precision press heads for the RCBS Turret Press, Lyman 8 Turret Press, and RCBS 6-Station Turret Press. The Creedmoor Enhanced Press Head is a direct drop-in upgrade to the factory OEM press head and can be installed in a matter of minutes. This press head is precision-crafted from stainless steel bar stock. Priced at $199.95, these enhanced heads are featured in the video below.
The $199.95 Creedmoor Sports turret top allows greater precision in case sizing and bullet seating. A recent UltimateReloader video covers the advantages of the new precision turret head for the Redding T-7. READ Full Report on UltimateReloader.com.
Share the post "Saturday Movies: Turret Press Showcase — 9, 8, 7, and 6 Stations"
When you’re on a varmint expedition in the Western states you can bet, sooner or later, you’ll encounter serious winds. Here’s some advice on how to minimize the effects of cross-winds on your shooting, and easily improve your percentage of hits. In essence, you want to use your ability to change shooting positions and angles to put the wind behind you.
A benchrest or High Power shooter must operate from a designated shooting position. He must stay put and deal with the wind as it moves across the course, from whatever direction it blows.
Put the Wind at Your Back
By contrast, a varmint hunter can move around and choose the spot that provides the most favorable wind direction. In most cases you’ll get the best results by moving your shooting position so the wind is at your back. This will minimize horizontal wind drift. Once you’re in position, use wind flags to direct your fire in line with the prevailing winds. A varminter who calls himself “Catshooter” explains:
The String of Death
I remember the first time I was on a dog town in the Conata Basin, in the Badlands area of southwestern South Dakota. Along with two other guys, I drove out for 21 days of shooting, and I never saw wind like that before. If all four tires of our vehicle were on the ground, the weather man said these were “mild wind conditions”.
After the first four or five days, we got smart. We would park the truck on the up-wind side of the town so the wind was at our back. Then we took a piece of string on a 3-foot stick, and set it in front of the shooters, and let the string point at the mounds that we were going to shoot.
For the rest of the trip, we didn’t have to deal with wind drift at all. We just shot the dogs that the string pointed to. We started calling our simple wind pointer the “String of Death”.
We were hitting dogs at distances that I would not repeat here (with benchrest grade rifles). After the first time out, I always took a wind rig like that.
Benefits of Swivel Benches
In a large varmint field, you’ll want to orient your shooting position to put the wind at your back if possible. If you have a rotating bench such as this, you can further adjust your shooting orientation to work with the wind, not against it. You may also want to position simple flags (posts with colored tape) downrange to alert you to wind changes you may not notice from your shooting positions. If you can’t get a “wind at back” orientation, the next best set-up is with the wind coming straight at you — that also minimizes the wind drift on your shots.
For many riflemen, reading the wind is the toughest challenge in long-range shooting. Wind speeds and directions can change rapidly, mirage can be misleading, and terrain features can cause hard-to-predict effects. To become a competent wind reader, you need range-time and expert mentoring. In the latter department, Frank Galli, founder of Sniper’s Hide, offers a detailed digital resource: Wind Reading Basics for the Tactical Shooter.
Wind Reading Basics is much more than a 47-page eBook — it has charts, instructions for ballistic calculators, and even embedded videos. Galli explains: “We break down the formulas, walk you through using a ballistic computer, and give you all the information in one place. From videos, to useful charts, we make it simple to get started. It’s all about having a plan, and we give you that plan.”
Galli’s Wind Reading Basics, priced at $7.99, can be downloaded from iTunes for iPads, iPhones and iOS compatible devices. Here are sample sections from the eBook (which includes videos):
Share the post "Wind Reading Basics for PRS and NRL Competitors"
When neck-turning cases, it’s a good idea to extend the cut slightly below the neck-shoulder junction. This helps keep neck tension more uniform after repeated firings, by preventing a build-up of brass where the neck meets the shoulder. One of our Forum members, Craig from Ireland, a self-declared “neck-turning novice”, was having some problems turning brass for his 20 Tactical cases. He was correctly attempting to continue the cut slightly past the neck-shoulder junction, but he was concerned that brass was being removed too far down the shoulder.
A while back, we featured a portable reloading bench built on a Black & Decker Workmate. That proved a VERY popular do-it-yourself project so we’re showing it again, in case you missed it the first time.
A benchrest or High Power shooter must operate from a designated shooting position. He must stay put and deal with the wind as it moves across the course, from whatever direction it blows.
Benefits of Swivel Benches
