October 30th, 2018

From the Land of Fjords — Hunting in Norway

Norway Fjord Hunting Skorpen

This time of year, deer and elk hunters throughout the Northern Hemisphere trek into the wilds in search of game. To celebrate the hunting lifestyle, we’re reprising a story from Europe that showcases the beauty of nature that can be experienced on a hunting trip.

Norway Fjord Hunting SkorpenIf you need a break from your hum-drum day at the office, how about taking a virtual vacation to Norway, where you can explore the scenic mountains in the Fjord region?

Forum member Kenneth Skorpen (aka “Sal”) has created a cool video of a deer-hunting trip he took in Norway. He didn’t bag a buck on this trip, but the walk in the Fjordland mountains took Kenneth through some spectacular scenery. (At the 11:25 time mark you’ll see an amazing sunset over the Fjord.) Kenneth did encounter a doe that had fallen down the mountain, and apparently broken its neck (14:35 time mark). The terrain is very steep, and Kenneth observed that: “I feel fortunate to be able to do this, but I also feel very tired in my legs. Did you know that the hares around here have shorter left legs due to the steep hills?”

More Hunting/Shooting Videos from Norway
You can watch more interesting hunting and shooting videos from Norway on Kenneth Skorpen’s Streken Vertebrae YouTube Channel. Here are some links:

And here is another Skorpen video showcasing beautiful Norwegian landscapes. This was filmed during a February rifle testing session with targets at 1100 and 1400 meters. You’ll see some stunning snow-capped scenery here, starting at the 4:30 time mark.

Permalink - Articles, - Videos, Hunting/Varminting No Comments »
September 27th, 2018

Practical Shooting Skills for Hunters — Field Rests

Thomas Haugland HuntingHunting season is here — and we know many of our readers will soon head to the woods in pursuit of deer, elk, or other game. To make a good shot, it’s wise to rest your rifle when possible. In this video, methods for stabilizing a rifle in the field are demonstrated by Forum member Thomas Haugland, who hails from Norway. Thomas focuses on practical field shooting skills for hunters. In this video, Thomas (aka ‘Roe’ on Forum and Sierra645 on YouTube) shows how to verify his zeros from bipod and then he demonstrates improvised field rests from the prone, kneeling, and sitting positions.

Thomas explains: “In this video I focus on basic marksmanship techniques and making ready for this year’s hunt. As a last check before my hunting season, I got to verify everything for one last time. My trajectory is verified again, the practical precision of the rifle is verified. I also practice making do with the best [improvised] rest possible when an opportunity presents itself. After getting knocked in the face by a 338LM rifle during a previous filming session, I had to go back to basics to stop [flinching]. I include some details from bipod shooting that hopefully some hunters will find useful. Fingers crossed for this years season, good luck!”

Permalink - Videos, Hunting/Varminting 1 Comment »
August 8th, 2018

GRS Rifle Stocks — The Pride of Norway

GRS riflestocks AS Norway Oscar Haugen ergonomic stockys stocks CNC sharpshooter

GRS stocks are produced in Norway. These stocks are known for their comfortable fit and ergonomics, but they are also strong and durable — thanks to attention to detail, careful construction, and premium materials. While GRS Riflestocks AS now produces excellent composite stocks, the majority of its products are still crafted from laminated wood. That’s not surprising because the GRS stock business evolved from a family furniture company.

GRS riflestocks AS Norway Oscar Haugen ergonomic stockys stocks CNC sharpshooter

This excellent video shows every stage of GRS Stock production. Worth Watching — Honest!
Sawing Blanks: 0:15 | CNC Milling 0:20 | Surface Sanding 0:30 | Dip Finishing 1:00

Making a GRS Laminated Stock
GRS stocks start off with blocks of laminated wood. There are potentially 1700 combinations given the number of colors, models, and inlets. The first stage employs a band saw to shape the rough outer shape and dimensions. Then each stock goes into a computer-controlled CNC machine for precision milling. From the CNC-machine, the rifle stock is handed over to GRS craftsmen who hand-finish the stock (photo below). Depending on design, GRS stocks can be delivered with up to 40 different inlets.

GRS riflestocks AS Norway Oscar Haugen ergonomic stockys stocks CNC sharpshooter

GRS Stocks — Ergonomically Designed
GRS riflestocks AS Norway Oscar Haugen ergonomic stockys stocks CNC sharpshooterGood ergonomics have always been a key GRS design objective: “All our rifle stocks are adjustable, because people are different. If you make a fixed stock, it will always be a compromise for your shooting position. Also, your ergonomics change in different shooting positions. There is a big difference between standing, sitting and laying on the ground. It’s not rocket science, but we recognized this a long time ago. And that is why we made the adjustment system the way it is. Obviously, having the correct length of pull, and a full contact with the cheek-piece, adds a lot of stability into the shooting position.”

When you handle a GRS stock, and get into shooting position, you notice it feels comfortable immediately. And the LOP and cheek-piece height can be adjusted easily, without tools.

GRS riflestocks AS Norway Oscar Haugen ergonomic stockys stocks CNC sharpshooter

The GRS grip design is distinctive — for important reasons: “The grips that we have (which off-centered and angled out) remove tension in your arms. So when you shoot you are more relaxed. And the recoil transfers neatly in your body.”

About GRS Riflestocks AS — A Family Company Run by Serious Shooters
GRS Riflestocks AS is run by two brothers, Håvard and Oscar Haugen. Oscar served in the Norwegian military for a decade as a QRF Sharpshooter (sniper) and Sharpshooter Team Leader. Oscar’s military experience has helped GRS design better rifle stocks: “I was a Sharpshooter for the Norwegian army for a long time, both as a soldier and instructor. So we knew what worked in the field. And we knew production. So we took something traditional, as a rifle stock is, and introduced something new into it. This way, the ergonomics and the adjustment systems became key features of the GRS rifle stocks.”

GRS riflestocks AS Norway Oscar Haugen ergonomic stockys stocks CNC sharpshooter
Håvard Haugen (L) and Oscar Haugen (R), founders of GRS Riflestocks AS.

GRS Riflestocks AS has become very successful. The company now ships stocks to 45 countries worldwide. Oscar Haugen says: “I smile every day knowing more and more hunters and shooters gets to know GRS. We make them shoot more accurately because their rifles fit them better [with our stocks]. What more could we ask for?”


GRS Stocks are produced in Hornindal, Norway. Watch the video to see beautiful Norwegian scenery:
“A short walk from the factory, you’re in the woods. You can go fishing, hunting … whatever you like”.

Permalink - Articles, - Videos, Gear Review No Comments »
June 13th, 2018

Great Video Series for Hunters and Long Range Shooters

Thomas Haugland long range shooting hunting hunter norway

There an excellent YouTube channel, THLR.NO, that offers videos for long-range hunters and marksmen. The channel’s creator, Thomas Haugland, is a serious, knowledgeable shooter, who takes his rifles out into the field, in all conditions. The THLR.NO channel offers solid advice on scopes, reticles, wind-reading, field positions, and much more. Haugland’s team puts a wide variety of gear through serious field tests — every thing from suppressors to packs to the latest electro-optical hardware. In addition the THLR.NO channel provides good advice on stalking techniques and hunting skills. Here are some recent videos that can help any rifleman.

How to Shoot Better with a Hunting Rifle

This “must-watch” video has great practical advice for hunters. It illustrates proper hand-hold and head position, and shows how to stay steady when breaking the shot. Even competition shooters can learn a few things. One viewer notes: “This was very informative. The footage through the scope showing how one’s position moves the sight alignment was particularly helpful.”

How to Gauge Wind Speed and Hold Off Using Reticles

This field video shows how to observe natural indicators — trees and vegetation — to estimate wind velocity. Then it shows how to calculate hold-offs using the reticle hash-marks. Thomas shoots a fast-cycling Blaser R93 rifle with Norma 6XC ammunition.

Thomas Haugland long range shooting hunting hunter norway

Thomas Haugland long range shooting hunting hunter norway

If you like these three videos, there are hundreds more on the THLR.NO YouTube channel. In addition, there is an excellent long-format video, Longrange Shooting 2, available on DVD or Vimeo on Demand. This impressive outdoors video features Thomas Haugland and Ulf Lindroth. Here is a preview:

Watch Longrange Shooting 2 on Vimeo:

Longrange Shooting 2 from Lindroth & Norin on Vimeo.

Permalink - Videos, Hunting/Varminting, Shooting Skills 1 Comment »
April 9th, 2018

Shooting Skills: Reading the Wind When Hunting

Norway Hunting Snow

Thomas Haugland, a Shooters’ Forum member from Norway, is a long-range target shooter and hunter. He has created an interesting video showing how to gauge wind velocities by watching trees, grass, and other natural vegetation. The video commentary is in English, but the units of wind speed (and distance) are metric. Haugland explains: “This is not a full tutorial, but rather a short heads-up to make you draw the lines between the dots yourself”. Here are some conversions that will help when watching the video:

.5 m/s = 1.1 mph | 1 m/s = 2.2 mph | 2 m/s = 4.5 mph
3 m/s = 6.7 mph | 4 m/s = 8.9 mph | 5 m/s =11.2 mph

More Interesting Videos from Norway
There are many other interesting videos on Haugland’s YouTube Channel, including Game Stalking, Precision Reloading, Shooting Fundamentals and Tips on how to use a Mildot Reticle on a scope with MOA-based clicks.

Permalink - Videos, Hunting/Varminting, Shooting Skills 4 Comments »
January 5th, 2017

Berger Bullets Joins Nammo Group — How This Benefits Shooters

Berger Joins Nammo group Lapua Vihtavuori

Berger Bullets is becoming part of the Nammo Group, joining Lapua, Vihtavuori, and SK Ammo. This is big news, as it combines one of America’s leading bullet-makers with a major global enterprise that produces superior loaded ammunition, powder, bullets, and brass. This is potentially a boon for shooters as Nammo’s resources will help Berger increase production capacity, expand its line of products (including loaded ammunition), develop new bullet types, and invest in new, advanced machinery that should increase output and efficiency. In addition, we do expect to see new lines of loaded ammo combining Lapua brass with Berger match bullets. That combo will be tough to beat. Overall, this is a very positive development for Berger which will be able to call upon Nammo’s engineering expertise and advanced production technologies. It’s also a great thing for shooters, who can expect improved availability of the most popular Berger projectiles.

Berger Joins Nammo group Lapua VihtavuoriBerger Will Be Leaving California
As part of the acquisition of Berger Bullets by the Nammo Group, Berger plans to relocate its operations, moving its factory from the current Fullerton, California location. Berger will definitely be leaving California in the future.

Eric Stecker, Berger’s President, says the exact timing of the move has not yet been set, nor has the location been chosen. Arizona is high on the list of potential sites, but Berger is considering other states as well. Once the new factory location is determined, Eric says he expects the move to be completed “by December 2018 at the latest”.

In this exclusive AccurateShooter.com interview, Berger President Eric Stecker talks about Nammo’s acquisition of Berger Bullets and explains how that will bring about important positive changes, including increased production capability.

Notice from Berger Bullets

We take great pride and tremendous pleasure in announcing that Berger Bullets has joined forces with the Nammo Group. This Norwegian/Finnish corporation control many premium brands including Lapua (Brass, Bullets, Ammo), Vihtavuori Powder, and SK Rimfire Ammunition.

The joining of Berger Bullets with these world renowned, premium brands ushers in a new era of quality, performance and product availability for the discerning shooter. Today, under the Nammo Group ownership, we join three other companies that share a strong passion and commitment to precision shooting performance. We are very excited to join forces with these premium quality brands, which are committed to precision and quality.

Nammo Resources Will Help Berger Grow
The Nammo Group brings to Berger Bullets a level of support that is rivaled by few and bested by none. Nammo will support us in many areas including production capability expansion, advanced engineering, innovative product development, and the opportunity to share technology between all of these top quality brands.

Our immediate goal is to significantly improve the availability of Berger products. Throughout our history the demand for Berger Bullets has exceeded our capacity even as we’ve grown our output capabilities numerous multiples over the last few decades. Our first obligation to our customers is to improve the availability while we remain committed to our highest level of quality in the industry. Much of what has made Berger Bullets successful will remain unchanged. Bryan Litz is developing more great bullets for Berger and our technicians will still be answering your emails and calls.

Our website will remain at www.BergerBullets.com and all methods of contacts will remain the same for now. As we run across any changes, we’ll make sure we keep you updated on our website and through emails. So please, keep your information current on your email subscription and we promise to keep you posted.

Berger Joins Nammo group Lapua Vihtavuori

The Nammo Group, www.Nammo.com, supplies high performance products to the aerospace & defense industry. Its core businesses are military and commercial ammunition; shoulder-fired systems; rocket motors; and demilitarization services. Nammo has 2,100 employees located in 12 countries.
Permalink - Videos, Bullets, Brass, Ammo, News 13 Comments »
November 25th, 2016

Norway Adventure with .338 Lapua Magnum

Norway Fjord .338 Lapua Magnum Norma Blaser R8 Zeiss

As a holiday treat for our readers, we are reprising a video feature about hunting in Norway. After watching this video, you may want to head off to Vesterålen in northern Norway…

This is one of the finest shooting videos we’ve ever seen. Set in the scenic Vesterålen archipelago of northern Norway, this high-quality 15-minute video is part Nat Geo travelog, part ballistics lesson, part gear review. We wish we had the opportunity to join Ulf Lindroth and Thomas Haugland on their remarkable shooting adventure. This video was originally created for Great Britain’s Fieldsports TV Channel.

This is an outstanding video, recommended for anyone interested in long-range hunting.

Long range shooters Lindroth and Haugland traveled to the Arctic Circle to field test a new .338 LM Blaser R8 (in GRS stock) fitted with a Zeiss Victory V8 4.8-35x60mm scope. (Ammo is Norma-brand .338 Lapua Magnum). The video shows how they confirm the ballistics of the Norma factory ammo in the Blaser R8 rifle system.

Norway Fjord .338 Lapua Magnum Norma Blaser R8 Zeiss

Ulf and Thomas initially test out the system confirming drop at multiple yardages, and then use the rifle for practical accuracy. Ulf says: “If you know your hunting will demand a long shot, and you want to push the limit but still be sure to make the first-shot kill… If you want to do an ethical hunt, if you want to push that limit, you have to do [this kind of testing].”

Norway Fjord .338 Lapua Magnum Norma Blaser R8 Zeiss

Ulf Lindroth (above) observed: “We shot [at 808 meters] observed the misses, clicked our way into the target, and now we have the true drop at that distance… in this air pressure, in this temperature. From there we can start working to find our TRUE trajectory. And when we have THAT… we can get serious about some target shooting.”

Norway Fjord .338 Lapua Magnum Norma Blaser R8 Zeiss

Norway Fjord .338 Lapua Magnum Norma Blaser R8 Zeiss

Permalink - Videos, Hunting/Varminting, Optics 2 Comments »
October 11th, 2016

Berger Bullets Joins Nammo Group

Berger Bullets Nammo Press release Nammo group Lapua brass ammunition

Breaking News: Berger Bullets Joins Nammo Group

The Nammo Group, parent of Lapua and Vihtavuori, has announced the acquisition of Berger Bullets, one of the USA’s leading bullet makers. With Berger Bullets joining the Nammo Group, this teams America’s ultra-premium bullet-maker with what is arguably the world’s most respected cartridge brass and ammunition-maker. This is huge news. For competition shooters this may be a “marriage made in heaven”. Many top shooters, including champions like Bryan Litz and John Whidden, are already shooting Berger bullets in Lapua brass. This merger will make it easier for the two companies (Berger and Lapua) to optimize the performance of factory ammo, as well as to optimize brass for use with Berger match projectiles.

A spokesman for Lapua said that Lapua will continue to make bullets in Europe while Berger will conduct its regular operations in the USA: “Lapua will still make bullets, and it will be ‘business as usual’ for Berger at this time. There are no plans to change production sites to consolidate product lines. Berger will continue to operate as an independent business, just under the Nammo umbrella.” NOTE: This acquisition will be subject to regulatory approvals by U.S. governmental authorities.

On firearm industry analyst believes this merger is a “win-win” for both Berger and Nammo: “This will help Berger export more product to the European market while it will give Nammo a stronger connection to the huge U.S. firearms market, expanding Nammo’s North American customer base”. Nammo president/CEO Morten Brandtzæg concurred, stating: “Having Berger Bullets on board is the perfect match for Nammo. Their products, which are complementary to our other premium brands, will strengthen our group’s strategic position in the U.S. commercial ammunition market.” This acquistion WILL include Berger’s ABM Ammunition and J-4 Jackets product lines.

Here is the press release issued by the Nammo Group, which is headquartered in Norway and has 2,100 employees in 12 countries:

Berger Bullets Nammo Press release Nammo group Lapua brass ammunition

(more…)

Permalink Bullets, Brass, Ammo, News 6 Comments »
October 11th, 2016

More Details on Berger Bullets Joining Nammo Group

On the heels of the announcement that Berger Bullets will join the Nammo group, the following information was posted on the Long Range Hunting Forum by Doc Beech of Applied Ballistics:

I would like to emphasize a couple of things before you read on. The [acquisition of Berger Bullets by Nammo] CHANGES NOTHING. Production will remain in the same facility, by the same people, to the same quality. Berger Bullets will remain the highest-quality bullets on the market. What this merger does, is it gives these companies [the opportunity] to work together, to provide the highest-quality ammunition.

Lapua is well known for its high-quality brass, VihtaVuori makes high-quality powder, and Berger makes high-quality bullets. When you put the three together, you have the possibility of unmatched, premium … factory ammunition. To be clear, this will not affect the quality or way that Berger bullets are produced.

Q & A about Berger Bullets Joining Nammo Group

Q. What are Nammo’s plans concerning Berger Bullets?
A. Nammo plans on operating Berger Bullets as a stand-alone brand with support from the Nammo Group in a number of areas. First, they would like to help Berger improve the availability of many of their bullets that are in high demand.

Q. Are you going to eliminate any specific bullets? In other words, do they need to stock up!
A. We have no immediate plans to discontinue any of our bullets. We will continue as a part of our normal business practice to discontinue bullets that have been replaced by a superior product or those that do not have a demand sufficient to warrant allocating time in our production schedule. This is just what we have always done as part of our process.

Q. Is Bryan Litz still going to be the ballistician for Berger Bullets?
A. Yes. Bryan is an important part of the Berger Bullet team and our plans definitely include keeping Bryan on as our lead ballistician.

Q. Is Eric Stecker going to remain in charge of Berger Bullets?
A. Eric Stecker will continue as President of Berger Bullets

Q. Are the same dealers going to carry Berger Bullets?
A. Yes, we have no plans to change the way we distribute Berger Bullets to the shooting community.

Q. Does this mean ABM Ammo will have direct access to components like powder and brass?
A. Yes.
__________________
Doc Beech – Applied Ballistics
doc.beech@appliedballisticsllc.com
www.abmediaresources.com – www.appliedballisticsllc.com

Permalink News 4 Comments »
September 24th, 2016

Norway Hunting Video — A Visual Feast

Norway Fjord Hunting Skorpen

Today, September 24th, is National Hunting and Fishing Day. To help mark that event, we’re reprising a story from Europe that showcases the beauty of nature that can be experienced on a hunting trip.

Norway Fjord Hunting SkorpenIf you need a break from your hum-drum day at the office, how about taking a virtual vacation to Norway, where you can explore the scenic mountains in the Fjord region?

Forum member Kenneth Skorpen (aka “Sal”) has created a cool video of a deer-hunting trip he took in Norway. He didn’t bag a buck on this trip, but the walk in the Fjordland mountains took Kenneth through some spectacular scenery. (At the 11:25 time mark you’ll see an amazing sunset over the Fjord.) Kenneth did encounter a doe that had fallen down the mountain, and apparently broken its neck (14:35 time mark). The terrain is very steep, and Kenneth observed that: “I feel fortunate to be able to do this, but I also feel very tired in my legs. Did you know that the hares around here have shorter left legs due to the steep hills?”

More Hunting/Shooting Videos from Norway
You can watch more interesting hunting and shooting videos from Norway on Kenneth Skorpen’s Streken Vertebrae YouTube Channel. Here are some links:

And here is another Skorpen video showcasing beautiful Norwegian landscapes. This was filmed during a February rifle testing session with targets at 1100 and 1400 meters. You’ll see some stunning snow-capped scenery here, starting at the 4:30 time mark.

Permalink - Videos, Hunting/Varminting 1 Comment »
June 17th, 2016

Stangskyting — Amazing Bolt Action Rifle Speed Shooting

How fast can you shoot a bolt-action rifle? We doubt you can out-pace the ace “Stangskyting” shooters from Scandinavia. Some of these guys can run more than two rounds per second, including mag changes! That’s impressive. Bulletin reader C. Lemmermann from Denmark told us: “In Scandinavia we have this competition called ‘Stangskyting’. It’s similar to the ‘Mad Minute’ but we only have 25 seconds to hit the target [at] 200-300m distance with a 6.5×55 [target rifle].” In the Stangskyting video below a shooter named Børklop puts 16 rounds on target in just 25 seconds. (He starts with a round in the chamber and cycles through three, 5-round magazines). Børklop’s performance, with just a sling and iron sights, is impressive. He’s shooting a Sauer 200 STR target rifle with 5-round magazine. Note that Børklop manipulates the Sauer’s bolt with his thumb and index finger, while pulling the trigger with his middle finger. As good as Børklop is, some Stangskyting competitors are even better. Roy Arne Syversrud from Oslo, Norway tells us: “The best shooters in Norway can do 21 shots in 25 seconds, changing the mag three times.”

This Guy Could Break the “Mad Minute” Record
Børklop’s rate of fire, 16 rounds in 25 seconds, is the equivalent of 38.4 rounds in 60 seconds. That’s a notable number because the record for the “Mad Minute”, a British Army marksmanship drill, is 38 rounds in one minute. That record was set in 1914 by Sergeant Instructor Alfred Snoxall, and still stands. So as you watch Børklop, keep in mind that Snoxall shot that fast for a full minute with a Lee-Enfield nearly 100 years ago!

Børklop has an average cycling time of 1.56 seconds per shot, starting with a round in the chamber. To beat the record of 38 rounds, he would need to make seven mag changes in sixty seconds. All those mag swaps could reduce his average time per shot, making it difficult to achieve 38 hits in a minute. But, if Børklop could use 10-round mags with his Sauer STR, this guy has the skills to break the record.

Sauer 200 STR Target Rifle

To emphasize the capabilities of the WWI-era British shooter who set the record, Snoxall shot as fast as Børklop does, but Snoxall reloaded with stripper clips. Snoxall’s SMLE (Lee-Enfield) rifle also had relatively crude open sights and the stock was far less ergonomic than Børklop’s Sauer STR stock.

Here’s another Stanskyting video showing John O. Ågotnes shooting rapidfire with his Sauer 200 STR (Scandinavian Target Rifle) chambered in 6.5×55. By our count, Ågotnes manages 17 shots within the 25-second time period. That rate of fire (17 in 25 seconds) equates to 40.8 rounds in one minute!

Permalink Competition, Shooting Skills 10 Comments »
March 24th, 2016

CMP Readies Electronic Target System for Oklahoma CMP Games

CMP Traveling Kongsburg electronic targets acoustic

Report by Johnny Fisher
The Civilian Marksmanship Program has just finished temporary installation of 15 traveling electronic Kongsberg Targets at the Oklahoma City Gun Club in Arcadia, OK. These high-tech targets will be employed during the Oklahoma CMP Games, slated for April 6-10, 2016. All the High Power rifle events during this year’s Oklahoma Games will be run exclusively on these electronic targets. Competitors will be scored electronically with match results being processed in real-time. Notably, this means High Power competitors will not have to do “pit duty” the entire week since manual target-pulling and shot-marking is no longer required.

CMP Traveling Kongsburg electronic targets acoustic

The majority of shooting at the Oklahoma CMP Games will be fired at the 200-yard line for the Garand / Springfield / Vintage & Modern Military (GSMM) matches. However, the electronic targets have also been readied for use in the scheduled Excellence In Competition (EIC) and Vintage Sniper matches. Those events require additional firing from 300 yards and 600 yards.

Electronic Target Technology — How Kongsberg Targets Work

CMP Targets technician Bryan Parris explains what makes these targets so special: “These targets were designed by the experts at Kongsberg Targets exclusively for the CMP to fit the standard US target dimensions of 72″ square target backers. What shooters discern as the black of the aiming bull is actually black rubber sheeting that is the entire size of the backer. A layer of white corrugated plastic then covers this rubber with a center hole having been cut out to reveal the appropriate sized bull for that yard-line. All that is required as competitors move further back through the course is to change out the plastic cover to reveal a larger aiming black.”

This acoustically-scored target system uses four microphones to locate the bullet as it passes through the target. The microphone closest to the bullet traveling through the target actuates the remaining three to triangulate the exact shot location for the scoring system and simultaneously display the shot on the shooter’s monitor.

CMP Traveling Kongsburg electronic targets acoustic

Behind the coroplast face and inside the foam insulation, the target is wrapped with rubber to form a type of chamber. This helps insulate the target’s four microphones stay insulated from extreme temperature changes and also helps keep out ambient noise. This chamber need only exist to the extent that it separates itself from the other targets. Parris states: “We’re building these targets to last a great long while. They are extremely durable and can have anywhere from 3000 to 5000 rounds fired through them before any maintenance is required whatsoever.”

CMP Traveling Kongsburg electronic targets acoustic

The entire system can be powered via battery, generator, or combination of both. The target line communicates wirelessly with the firing line computer system for timing courses of fire and recording scores. And of course, there is virtual real-time communication with monitors set up on each firing point to display shot / group location and value.

When fully assembled, each target weighs about 200 pounds. They are a little cumbersome in their current form, but the CMP’s target technicians are “still working some things out [for] potential future travel games.”

Registration Still Open for Oklahoma CMP Games
The 2016 CMP Oklahoma Games will be held at the Oklahoma City Gun Club in Arcadia, OK from April 6 – 10, 2016. Registration is still available. For more information about these Kongsberg Electronic Targets, contact Bryan Parris of CMP Targets at (256) 835-8455 or bparris@thecmp.org.

Permalink Competition, News 2 Comments »
August 24th, 2015

.338 Lapua Magnum in Norway — Outstanding 15-minute Video

Norway Fjord .338 Lapua Magnum Norma Blaser R8 Zeiss

This is one of the finest shooting videos we’ve ever seen. Set in the scenic Fjordland of northern Norway, this high-quality 15-minute video is part Nat Geo travelog, part ballistics lesson, part gear review. We wish we had the opportunity to join Ulf Lindroth and Thomas Haugland on their remarkable shooting adventure. This video was originally created for Great Britain’s Fieldsports TV Channel.

This is an outstanding video, recommended for anyone interested in long-range hunting.

Long range shooters Lindroth and Haugland traveled to the Arctic Circle to field test a new .338 LM Blaser R8 (in GRS stock) fitted with a Zeiss Victory V8 4.8-35x60mm scope. (Ammo is Norma-brand .338 Lapua Magnum). The video shows how they confirm the ballistics of the Norma factory ammo in the Blaser R8 rifle system.

Norway Fjord .338 Lapua Magnum Norma Blaser R8 Zeiss

Ulf and Thomas initially test out the system confirming drop at multiple yardages, and then use the rifle for practical accuracy. Ulf says: “If you know your hunting will demand a long shot, and you want to push the limit but still be sure to make the first-shot kill… If you want to do an ethical hunt, if you want to push that limit, you have to do [this kind of testing].”

Norway Fjord .338 Lapua Magnum Norma Blaser R8 Zeiss

Ulf Lindroth (above) observed: “We shot [at 808 meters] observed the misses, clicked our way into the target, and now we have the true drop at that distance… in this air pressure, in this temperature. From there we can start working to find our TRUE trajectory. And when we have THAT… we can get serious about some target shooting.”

Norway Fjord .338 Lapua Magnum Norma Blaser R8 Zeiss

Norway Fjord .338 Lapua Magnum Norma Blaser R8 Zeiss

Permalink - Videos, Hunting/Varminting 5 Comments »
September 7th, 2014

Bipod Shooting and Improvised Rests for Hunters

Thomas Haugland HuntingForum member Thomas Haugland from Norway has produced an excellent video that covers practical field shooting skills for hunters. In his video, Thomas (aka ‘Roe’ on Forum and Sierra645 on YouTube) shows how to verify his zeros from bipod and he demonstrates improvised field rests from the prone, kneeling, and sitting positions.

Thomas explains: “In this video I focus on basic marksmanship techniques and making ready for this year’s hunt. As a last check before my hunting season, I got to verify everything for one last time. My trajectory is verified again, the practical precision of the rifle is verified. I also practice making do with the best [improvised] rest possible when an opportunity presents itself. After getting knocked in the face by a 338LM rifle during a previous filming session, I had to go back to basics to stop [flinching]. I include some details from bipod shooting that hopefully some hunters will find useful. Fingers crossed for this years season, good luck!”

Thomas has produced many other quality videos for his Sierra645 YouTube Channel. On his “Langholdsskyting” YouTube Channel, you’ll find 30 more nicely-made videos (in both English and Norwegian) about hunting and precision shooting.

Spectacular Scenery
Below you’ll find a great video by Thomas that demonstrates up/down angle (incline) shooting. This video features some amazing scenery from Norway along with angle estimation sequences and use of the ACI (Angle-Cosine Indicator). Even without the technical tips, this video is well worth watching just to see the jaw-dropping Norwegian scenery! Yes that’s Thomas standing on the top of the peak in the photo (above right).

Permalink - Videos, Hunting/Varminting, Shooting Skills 1 Comment »
August 7th, 2014

GRS Introduces New Aluminum Chassis System

GRS Riflestocks is a Norwegian company that has built its reputation on intelligently-designed, high-quality laminated wood stocks. GRS wood stocks, for competition and hunting, are distributed in the USA by Kelbly’s. Ergonomics have always been a key feature in GRS designs, making GRS stocks very comfortable for the shooter.

CLICK IMAGE for Full-size Photo
GRS Aluminum stock chassis system

GRS Aluminum stock chassis systemGRS Aluminum Chassis Systems
Now GRS is moving into a new product area — developing an aluminum chassis system for long range applications. The first GRS metal stocks should be ready this month for European delivery (though it could take longer to export to USA). The new GRS metal chassis system will be offered for many popular actions:

Remington Short Action & Long Action
Sig Sauer SSG 3000/Sauer 200 STR
Howa Short Action & Long Action
Tikka T3

Initially, these stocks will be right-hand only, though a left-hand version may be offered in 2015. GRS has not yet released any pricing details for its aluminum chassis systems.

GRS Aluminum stock chassis system

Excellent Video Shows How GRS Stocks Are Made — Plus Shooting in Norway

Product Tip from EdLongrange. We welcome reader submissions.

Permalink - Videos, New Product, Tactical No Comments »
May 23rd, 2014

Kelbly’s and GRS Introduce New Low-Profile F-Class Stock

Made in Norway by GRS, the new Kelbly “X-Eater” stock combines an ergonomic grip with the superior tracking ability of the latest, low-profile designs. Height-adjustable cheek-piece and length-adjustable buttpad allow the shooter to tailor the stock to his preferences. The ergonomic grip/wrist helps the shooter steer the rifle precisely with greater control. The low-profile design aids tracking and helps tame the torque generated by the large 7mm and .30-cal cartridges favored by top F-Open competitors.

CLICK PHOTOS to See Full-Size Versions
Kelbly Rifles GRS F-Class Stock X-Eater F-Open

Kelbly Rifles GRS F-Class Stock X-Eater F-Open

The fore-end is made with the same twin-runner (catamaran-style) design as the previous GRS F-Class Open stock. (On the underside of the fore-end there are left/right rails with a relieved area in the center). The big change is that this new stock sits lower on the front bag compared to the first F-Class stock from GRS. The rear of the stock is designed for a two-stitch rear bag. Initially the stock will only be offered in Right Hand versions in black/blue and red/blue laminate.

CLICK PHOTOS to See Full-Size Versions
Kelbly Rifles GRS F-Class Stock X-Eater F-Open

Kelbly Rifles GRS F-Class Stock X-Eater F-Open

    STOCK SPECIFICATIONS

  • Stratabond Laminate with lacquer finish
  • Adjustable Length of Pull (from 13.8 to 15.0 inches)
  • Height-Adjustable cheek-piece
  • Cushy 0.5″-thick Limbsaver/GRS recoil pad
  • Stock (by itself) weighs 4.07 pounds (with Rem 40X inlet)
  • Optional Height-Adjustable recoil pad.

Kelbly Rifles GRS F-Class Stock X-Eater F-Open

Permalink Gear Review, New Product 4 Comments »
October 17th, 2013

Vektor Muzzle Brakes From Norway Install Without Gunsmithing

Forum member Kenneth Skorpen (aka “Sal”) from Norway sells a variety of shooting products through the www.Vertebrae.no website. Among the more interesting products offered by Skorpen are a series of muzzle brakes that can be installed on your barrel with no gunsmithing required — if the barrel tip has already been threaded. Crafted in Norway by Vektor Maskin, these muzzle brakes employ an internal inside/outside threaded bushing with a stop nut that fits on the barrel. With the threaded bushing in place, you simply screw the muzzle brake onto the bushing, align it so the ports are horizontal, then set the stop nut and set-screws. (Note, the set-screws touch only the bushing — they do not impinge on the barrel itself.) The video below shows how Vektor spin-on muzzle brakes are installed:

Vektor Norway Muzzle BrakeThere are compact, standard, and large size Vektor muzzle brakes. Adjustment and installation is the same for all three sizes. The small, compact model, with two rows of opposed horizontal ports, is designed for .223-caliber rifles. The medium (standard) size, with either double or triple sets of opposed ports, is suited for 6.5mm or .308 calibers. The largest size, with three rows of large ports, is configured for the .338 magnum calibers. Skorpen claims that all three sizes of Vektor brakes can reduce felt recoil by 70% to 80% The brake itself is SIS1914-04 steel with an oiled zinc phosphate finish. The internal socket is AISI 303 (SUS 303) stainless steel.

Vektor Muzzle Brake Vertebrae

If your barrel is already threaded at the muzzle, the Vektor brakes can be installed with no metal-work or gunsmithing required. Otherwise, you will need a gunsmith to thread the muzzle end of the barrel. The Vector bushings can be machined to a variety of thread types: 1/2″-20/UNF, 1/2″-28, 5/8″-18/UNF, 5/8″-24, m14x1, m14x1.5, m15x1, m16x1, m17x1, and m18x1. Just indicate the thread pitch you require when ordering.

How to Order Vektor Muzzle Brakes
Skorpen’s company, Vertebrae Sikkerhet & Teknikk, exports these Vektor brakes at reasonable prices. With one (1) supplied bushing, the compact brake is $131.43 USD, standard brake is $167.64 USD, and the large (magnum) brake costs $198.49 USD. Extra bushings are available for around $20.00. While the website lists .223, 6.5mm, .308, and .338 caliber brakes, Vetebrae can produce brakes in other calibers on request (add 5 days to delivery time).

You can also purchase Vektor muzzle brakes by emailing joachim [at] vertebrae.no. (It may be cheaper to order direct via email.) Just send an email stating your desired caliber and thread pitch. Normal delivery time to the USA is one to two weeks.

Permalink Gear Review, New Product 7 Comments »
January 20th, 2013

Kelbly’s Unveils KTS Stock, 1-8x24mm March, and GRS Stocks

Kelbly.com .338 Lapua Magnum

New Jumbo .338 LM-sized Action and New KTS “Tactical” Stock
At SHOT Show 2013, Kelbly’s showcased a pair of impressive .338 Lapua Magnum rifles. One of these guns featured the beefy new .338 LM repeater action, fitted into Kelbly’s new KTS stock (top rifle in photo above). The KTS stock shares the long wheelbase of Kelbly’s popular 1000-yard benchrest stock. The particular KTS in the above photo features a 2.5″ rounded forearm, adjustable cheekpiece, and butthook cut-away on the bottom of the buttstock. Kelbly’s website states: “The Kelbly KTS stock is designed for long-range competition and tactical shooting. The KTS stock is based off of our 1M stock. It is available in right- or left-handed models. The KTS is extremely adaptable — we can install an adjustable cheek piece, a 3-way butt pad, a butt hook, or a beaver tail front end (2.5″ wide). The standard configuration is just like the 1M stock, the previously listed options must be requested.”

Kelbly KTS

Personally, I found the wrist/grip shape on the KTS stock much more comfortable than the very fat, blocky grips found on some “tactical” stocks. If you are thinking about buying a McMillan or a Manners “tactical” stock, you should give this new Kelbly KTS consideration as well.

New 1-8x24mm FFP from March
What’s new from March this year? We didn’t see any new high-magnification scopes, but Kelbly’s rolled out an all-new March 1-8x24mm tactical scope. This First Focal Plane scope should be ideal for three-gun competition. The new March 1-8x24mm should also appeal to hunters who want a bright, compact scope with a true 1-power viewing option plus ranging capability.

March 1-8x24mm FFP scope

Kelbly’s is now importing the beautifully-crafted GRS laminated stocks from Norway. Featuring an ergonomic grip, these GRS stocks come complete with adjustable cheekpiece and adjustable buttplate. For decades, Kelbly’s has been a respected source for quality fiberglass stocks. Now, as the GRS importer, Kelbly’s will offer some of the nicest laminated wood stocks on the market. Although final pricing has yet to be set, Kelbly’s expects GRS stocks to cost $600.00 to $700.00. We think this is competitive price range when you consider that GRS stocks come standard with adjustable hardware and no final clear-coating is needed.

March 1-8x24mm FFP scope

March 1-8x24mm FFP scope

Permalink New Product, Optics 2 Comments »
September 28th, 2012

Fjord Mountains Deer Hunting Video from Norway

Norway Fjord Hunting SkorpenIf you need a break from your hum-drum day at the office, how about taking a virtual vacation to Norway, where you can explore the scenic mountains in the Fjord region?

Forum member Kenneth Skorpen (aka “Sal”) has created a cool video of a recent deer-hunting trip in Norway. He didn’t bag a buck on this trip, but the walk in the Fjordland mountains took Kenneth through some spectacular scenery. (At the 11:25 time mark you’ll see an amazing sunset over the Fjord.) Kenneth did encounter a doe that had fallen down the mountain, and apparently broken its neck (14:35 time mark). The terrain is very steep, and Kenneth observed that: “I feel fortunate to be able to do this, but I also feel very tired in my legs. Did you know that the hares around here have shorter left legs due to the steep hills?”

More Hunting/Shooting Videos from Norway
You can watch more interesting hunting and shooting videos from Norway on Kenneth Skorpen’s Streken Vertebrae YouTube Channel. Here are some links:

Norway Fjord Hunting Skorpen

Permalink - Videos, Hunting/Varminting No Comments »
May 24th, 2012

New to North America — GRS Laminated Stocks from Norway

Tikkashooters.com is now importing ergonomic field and tactical stocks crafted by GRS Rifle Stocks of Norway. These “Stratabond” Laminate wood stocks come in many colors — all with a gorgeous oiled finish. The GRS stocks come in three styles, plus a biathalon model, with an F-Class and Safari model to come. All styles are all drop-in inletted for most popular actions — not just Tikkas! GRS stocks feature Speedlock push-button adjustment for recoil pad position and comb height. All stocks come with a one-inch thick Limbsaver recoil pad.

GRS Stocks Norway Hunting

GRS Stocks Norway Hunting

Shown above is the Sporter/Varmint model, which comes in six colors. This design has a butt hook and the 6° grip angle for more comfortable hand positioning. As with other GRS stocks, the Sporter/Varmint model features quick, no-tools adjustability using a Speedlock system. Inlets are offered for Howa (SA, LA), Rem 700 (SA, LA), Sako (models 75, 85, L-579), and Tikka (models 55, 65, 595, 695, all T3 versions, including T3 RH, T3 LH, Varmint, Tactical).

GRS Stocks Norway Hunting

Next, shown above, is the GRS Adjustable Hunting model which comes in four colors: Black, Brown, Green Mountain Camo, and Royal Jacaranda. The fore-end is comfortable when shooting without a rest and the grip angle is canted 6° to provide a more ergonomic hold. Inlets are offered for Howa 1500 (SA, LA), Rem 700 (SA, LA), Sako (models 75, 85, L-579), and Tikka (models 55, 65, 595, 695, all T3 versions, including T3 RH, T3 LH, Varmint, Tactical).

GRS Stocks Norway Hunting

Last, but not least, is the GRS Long-Range Model, offered in six colors. This design is inspired by military sniper-type rifles. This stock is similar to the sporter/varmint model, but has a more pronounced butt hook with an integrated monopod with quick release and micro adjustment. The longer fore-end provides a better bipod platform and aids in balancing long, heavy barrels. Inlets are offered for Rem 700 (SA, LA, left/right), Rem 40X (single shot), Sako 75 (IV, V), Tikka T3 (Std, Varmint, Tactical).

Save $100 with Introductory Pricing This Month
For more information visit the GRS Stocks page on the TikkaShooters.com webstore. NOTE: Introductory pricing is available through May 31, 2012. The GRS Hunter and Sporter/Varmint stocks are currently priced at $697.00 fully inletted, including adjustable hardware. The Long-Range Model is currently priced at $897.00 fully inletted with adjustable hardware. Unless the intro pricing deal is extended, expect prices to increase $100.00 per model starting June 1, 2012.

Permalink Hunting/Varminting, New Product 11 Comments »