Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









November 28th, 2012

Customized Loading Blocks — Perfect Gift for a Shooter

Billet Aluminum Loading Block

Forum member Tom Sziler is running a holiday sale on his customized, billet-aluminum, CNC-machined loading blocks. Machined from solid 6061 billet aluminum, these blocks are sized 3.5-4 inches wide, one inch thick (top to bottom), and 6.6-8.5 inches long. (Sizes varying slightly with cartridge type.) You’ll find more information on Tom’s website CNCShooter.com. To order, contact Tom by sending email to tom.sziler (at) gmail.com . NOTE: To guarantee delivery by Christmas, order/payment must be received by November 30th. Payment can be made by check, money order, or PayPal (3% extra).

Tom explains: “The blocks hold 50 rounds of ANY caliber you want them made for. Engraving is included on your block at no extra charge, and each block has 4 rubber feet to prevent sliding and damage to the block or work surface. The round typically sits .75″ deep in the block, holding it very securely and with no excessive rattle.”

Tom adds: “These are not ‘universal’ blocks, but rather are precision-milled on CNC machines to a tight tolerance and excellent surface finish. They are heavy, sturdy, and durable. These are by far the highest-quality loading/range blocks on the market today. For those who don’t need engraving, I offer ‘economy’ blocks for a reduced cost. These blocks are exactly the same as the standard blocks, except they do not have engraving and are .75” thick.”

Blocks with Tray, Sorting Blocks, and High-Volume Loading Blocks
Tom offers a variety of other products for reloaders. These include: 25-round blocks with a tray, bullet sorting blocks, full-length accessory trays, 100-round loading blocks, and 169-round high capacity loading blocks. Below is the 25-round block with tray. (This also works as an ammo caddy.)

Quantity Pricing for 2012 Holiday Sale:

1. QTY 1-5 will receive a 10% discount from the normal price.

2. QTY 6+ will receive lowest possible pricing (listed below).

3. QTY 16+ Free shipping in addition to the discounts in chart.

Tom Sziler
5521 W 110th Street, Ste 6
Oak Lawn, IL 60453
tom.sziler[at]gmail.com

Permalink New Product 3 Comments »
August 5th, 2012

Billet Aluminum Loading Blocks from Tom Sziler

Billet Aluminum Loading Block

Review by German Salazar, Contributing Editor
Tom Sziler, a very talented machinist and shooter, is now offering handsome billet aluminum loading blocks through CNCshooter.com. I recently bought a set and am very impressed with their quality. You can see I have the cartridge type engraved on my .30-06 block. Tom makes these in all case head sizes and will engrave just about anything you like on the side. Tom’s been a bit backlogged lately, but for a custom product, delivery was more than speedy. I received mine in about three weeks.

Billet Aluminum Loading Block

2011 Update (By AccurateShooter.com Editor)
Tom has recently expanded his line of CNC-milled loading blocks, which are sold through his website, CNCshooter.com. There are now four price levels for the 50-round blocks: $16.50 for .22LR blocks (Small); $28 for most centerfire cartridges (Standard); $31 for very large cartridges such as .338 Lapua, .45-70, etc. (Large); and $33 for BMG, CheyTac, etc. (Jumbo). Tom also offers an “economy” version of his 50-rd loading block for just $19.00. These are made to the same quality and precision as the original loading block; however, they are crafted from 3/4″ aluminum and have NO engraving.

New Products: 25-round Block and Range Tray
New this year from Tom is a smaller, 25-round loading block, priced at $17.50. This has the same basic design (with engraving) as the 50-rounder, but it is half the length (with half the capacity). This is perfect for low-quantity handloading. Some guys like to use the 25-round ammo block when shooting in competition. It makes for a quick, handy ammo caddy. But even better for competition is Tom’s new Range Tray shown below. It has a milled-out tray for empty brass or small parts. Price is $28.00 for most cartridges up to WSM head diameters.

If you order from Tom, add $5 for shipping up to 2 pieces, or $10 for 3-7 pieces. Loading blocks ship in USPS flat-rate boxes. Tom prefers to receive payment by way of U.S. Postal Money Order. Send money order, order specs and your shipping address to:

Tom Sziler
5521 W 110th Street, Ste 6
Oak Lawn, IL 60453
tom.sziler[at]gmail.com

Permalink Gear Review, New Product 7 Comments »
November 16th, 2011

CNC-Machined Headstamp Coasters — Great Gift Item

Tom Sziler headstamp coasterHere’s a great gift item produced by one of our Forum Members. Tom Sziler (aka Tomekeuro85) makes CNC-machined aluminum coasters designed to look like cartridge headstamps. Tom’s coasters are first milled from a solid piece of 6061 aluminum, then anodized in a brass color. Anodizing provides color and protects the finish.

Headstamp Coasters come in sets of four (either matching or mixed) with rubber pads on the bottom. Tom can engrave his coasters to look like most actual production headstamps, for almost every cartridge. (Buyers need to specify the Cartridge name and brass manufacturer.) Cost is $35.00 for set of four (4) matching coasters, or $40.00 for a mixed set with various calibers or mfg. names. Shipping is $5.00 flat rate. Discounts are offered with five (5) or more sets. Order from Tom.Sziler [at] gmail.com.

Tom Sziler headstamp coaster

Tom is taking orders now for Christmas delivery. He told us: “I will set a limit of 60 sets so that I can have them all shipped out in time for Christmas. If you’re interested please get your order in ASAP. I would very strongly prefer to have payment by November 25th at the latest to have everything ready to go as soon as I can. If the payment is not received by that date, I cannot guarantee delivery by Christmas.” To order, send email to Tom.Sziler [at] gmail.com .

Permalink New Product, News 1 Comment »