Locking Handle Kits for Swivel Bipods
If you’ve ever used a Harris Swivel Bipod, you know that, without tools, it is difficult to put enough tension on the swivel locking knob to really lock the unit solid. And, if you do manage to get the knob really tight (perhaps by using pliers), it is difficult to loosen with fingers alone.
That was why Terry Cross and the folks at KMW Long Range Solutions invented the Pod-Loc™. This system replaces the knurled swivel tension knob with a push-button adjustable handle. Using the handle you can easily set the swivel tension at any level from loose to “rock solid”. And you can release tension to adjust the bipod to different terrain just as easily. The KMW Pod-Loc™ retails for about $27.00 at Brownells.com and Sinclair Int’l.
Pod-Loc™ Installation Instructions
How to Build Your Own Bipod Swivel Locking System
While we use genuine KMW Pod-Locs on our rifles, readers on a tight budget, or who have a large collection of bipod-equipped rifles, can economize by putting together their own swivel locking systems from off-the-shelf components. You need two parts per installation: a push-button swivel handle and a 3/16″ spacer. Levers and spacers are both available online from www.T-Nuts.com. The spacer is part #SS1 ($1.00). T-Nuts offers a variety of suitable handles, ranging in price from $5.80 to $8.50. So, by sourcing the parts, you can outfit three bipods with swivel adjusters for the cost of one Pod-Loc.
We recommend the Nylon/Stainless BPL/NS model ($7.70), but you may prefer the all-metal BPL-Z ($7.00), or the shorter BPL-Micro model ($8.25). The compact Micro lock does not protrude past the body of the bipod, yet is still easily grasped. T-Nuts supplies one 3/16″ spacer with most of its bipod handles. T-Nuts handles are also available with a metric M6x1.0 thread for use with imported bipods such as Outers and Rockport.
Installation is Easy — With the Right Socket
To install a swivel locking system, first you’ll need a 1/4″ socket to remove the keeper nut from the threaded pivot rod. (During this process, you’ll need to keep pressure on the pivot rod retaining pin on the opposite side of the bipod.) Don’t try to remove the keeper nut with pliers or an open-end wrench. You really need the correct socket. Once that keeper nut is removed, then unscrew the knurled tension knob/ring. This is attached to the same threaded shaft as the keeper nut but you should be able to remove it without tools.
After the knurled tension ring is off, it is easy to put your handle on the bipod. First slip the 3/16″ spacer over the threaded pivot rod. Keeping finger pressure on the pivot rod retaining pin (on reverse side), then spin on the T-Nuts handle. Rotate the handle inwards until it firmly locks the bipod swivel mechanism. By pushing the button in the head of the handle, you can swing the handle left or right to set its position without altering the swivel tension.
Similar Posts:
- Swivel Bipod Locking Handle Options
- Get a Handle on Your Swivel Bipod — KMW Pod-Loc
- Essential Bipod Upgrade — Add a Handle to Your Swivel Bipod
- KMW Pod-Lock: Essential Accessory for Bipod Shooters
- Handy Handle for Harris “S” Swivel Bipods from EABCO
Tags: Bi-pod, Brownells, Harris, Poc-Loc, Pod-Lock, Pod-Lok, Swivel Bipod, T-Nuts
I am looking for a swivel knob similar to the one on a motor car window winder. It will be a push-on snap fit.
Wonderful solution – thank you so much!!!
I like the Alpha Bravo brand from http://www.MidwayUSA.com. This brand has always worked for me and is a great alternative to these options.
Another solution is the S.A.R.G. knob known as Shooters Adjustable Rotary Grip available from http://www.alamofourstar.com
It replaces the original Harris knurled steel knob with an aluminum knob that functions in all positions.
Good to see this again. T-Nuts is a great place to deal with. They also have inserts to use in your stocks for studs and knobs to use for your F-Class rests.