Thompson/Center Arms (T/C) has identified a condition that may cause the safety lever on certain ICON®, VENTURE™ and DIMENSION® rifles to bind, preventing the safety from becoming fully engaged. In this situation, closing the bolt may move the safety to the fire position. The rifle will not fire unless the trigger is pulled. Though there should be no risk of the gun going off by itself, T/C states: “Out of an abundance of caution, we are taking this action to recall the rifles so that the firearm can be inspected by our technicians to ensure that the safety lever functions as designed.”
This is a large-scale recall, not just a few rifles. This recall applies to all Icon, Venture, and Dimension rifles manufactured by Thompson/Center Arms prior to June 13, 2013. If you own a rifle affected by this recall, T/C recommends that you stop using the rifle and return it to T/C at once: “Because the safety of our customers is our utmost concern, we ask that you stop using your rifle until we have an opportunity to inspect the safety lever to ensure its proper function.”
To facilitate the inspection and repair, if necessary, of your rifle safety lever, contact Thompson/Center’s customer service department to receive instructions and a pre-paid shipping label for the return of your rifle to the factory. At no cost to the owner, T/C will repair the rifle and ship it back. For more information, visit www.tcarms.com. If you have any questions about this recall, contact Thompson/Center at (800) 713-0355.
21st Century Shooting produces a high quality powder funnel, that is very “user-friendly”. The top section is precision ground and polished for a smooth flow. The center has a see-through tube so you can watch the progress of your powder dropping into the case. At the bottom of each funnel is a black case adapter that seats securely yet won’t get stuck on the case. There are five different adapter sizes — the smallest fits .17 Rem to .223 Rem, while the largest fits big magnum calibers. We use the mid-sized, #3 adapter most often. This fits 6mmBR, 6.5×47 Lapua, and .308 Win family of cases (.243 Win, .260 Rem, 7mm-08, .308 Win). Additional adapters are $6.99 each. There are three tube lengths available: 3″, 6″, and 10″. So, if you need an extra-long drop tube (to help fill PPC and other small cases), 21st Century has you covered.
The funnels are priced by size. The 3″-long model is $24.00, the 6″-long model is $27.00, and the big 10″-long model is $31.00. Prices include one (1) adapter. These high-grade funnels will help you load faster and easier, with fewer spilled kernels. We use these funnels and they do work well. The appropriate collars fit your .223 Rem, 6PPC, 6mmBR, Dasher, 6XC, .260 Rem, .284 Win, and .308 case necks just right — not too loose, not too tight. Kernels flow smoothly through the tube without sticking to the sides. The aluminum top section does not seem to attract a static charge so you don’t have to waste time brushing kernels off the funnel after use. We like this product. For high-volume precision reloaders, these funnels are worth the money.
Are you an NRA member? Think you have $2500 ArmsCare insurance coverage for your firearms, as a benefit of membership? Well there’s a catch. If you fail to ACTIVATE your NRA insurance, your claim will almost certainly be rejected if you suffer a loss. The NRA insurance webpage states:
“As a benefit provided by the National Rifle Association, [members] are automatically eligible for $2,500 ArmsCare Firearm Insurance. This firearms coverage … must be activated to take effect.”
Many NRA members are not aware of the activation requirement. That’s not surprising, as there’s no mention of this in many NRA membership solicitations. While the activation clause is disclosed in printed materials mailed to members, we bet that a large percentage of NRA members are not aware that their NRA insurance is essentially useless until “activated”. Just signing up for an NRA membership (and paying the dues) is not enough. You must activate the insurance or your claims can be rejected. Even if you have been a dues-paying NRA member for decades, you need to activate your insurance.
This is the real deal. Forum members (with current, active NRA memberships) have had 2013 gun loss claims rejected because they had not “activated” their NRA insurance. Don’t suffer the same fate. If you are an NRA member, you should activate your ArmsCare insurance right now. Don’t delay. Your NRA ArmsCare insurance won’t become effective until you activate it!
Do you own one or more AR-platform rifles? Need to fix and service critical components in the field? Then you should check out the new AR Platform Multitasker Tool sold by Brownells. This handy gadget has enough functions to keep MacGyver happy. It has hex wrenches for scope rings and LaRue mounts, front sight tool, a Castle Nut spanner wrench, a pin punch, and even a carbon scraper — something every AR owner can definitely use.
In addition to these gun-specific tools, the Multitasker includes a knife blade, pliers, and a magnetic bit driver with ten bits. The cleverly-designed tool folds up to fit in your pocket. For a further explanation of all the tool elements, and an explanation of how they work (with many good photos), see the Multitasker Review on Ar15news.com.
Brownells AR Platform Multitasker Tool Features:
Non-slip G10 Scaled Grips (either matte black or tan)
Billet Pliers (D2 tool steel — CNC milled)
Carbon Scraper with Radiused Tip
3/8″ Hex for LaRue Mounts
1/2″ Hex for Scope Rings
Magnetic Bit Driver (1/4″) with M16A2 FSP Adjuster
Dual-Lug M4 Castle Nut Spanner Wrench
Pin Punch (3/32″) with 8-32 male thread for Otis cleaning kit
D2 3″-long Tool-Steel Knife Blade
Combo Flat Screwdriver and Bottle Opener
Pocket clip (removable)
Kit with 10 Hex Bits for commonly used AR accessories
We’ve had some problems with our venerable RCBS Chargemaster (overcharges that display incorrectly, even after a second weighing), so we decided to dispense one grain low and then trickle up on a Lab Scale with the latest Magnetic Force Restoration (MFR) load cell technology. Though still quite expensive, MFR scales respond very quickly and accurately, so they are ideal for trickling. To optimize the trickling process, we acquired an Omega 2-Speed Powder Trickler. This $69.95 gadget works great with an MFR scale, allowing you to quickly and easily “finish off” charges with extreme precision — no more than a couple of kernels variance in your load. (With a typical extruded powder, a tenth of a grain is four to five kernels).
Omega 2-Speed Trickler
Most reloaders have used a manual powder trickler at one time or another. However, they can be frustrating to use for a variety of reasons — e.g. the tube is too short, or the trickler is too low, or the unit isn’t stable enough, or the unit doesn’t hold enough powder.
Well, the inventors of the Omega 2-speed Powered Powder Trickler have considered all those practical shortcomings in existing tricklers, and built a superior product — a “better mouse trap.”
Every aspect of the battery-powered Omega 2-Speed Trickler (from Dandy Products LLC) shows smart thinking. First, hopper height can be adjusted from 1/2″ to 5.5″ high. The tube is long enough to reach the middle of large-footprint electronic scales. And the outer end of the tube is cut at an angle, so you can see the powder kernels as they flow out — no more surprise clumps that raise your charge 0.3 grains. The powder hopper itself is bigger than most, holding a full 1000 grains. That lets you load all afternoon without having to constantly replenish your trickler.
There is also a vinyl-clad, yellow “tuner” weight. You can slide this back and forth on the arm to adjust the powder flow. Once you get it set for your choice of powder, with a little practice, you can dispense one to two kernels reliably with a single, quick touch of the Omega’s dispense button.
In practice, the Omega trickler is easy to use. It is reasonably fast, while being as precise as anything on the market. The unit is controlled by a two-button control pad, with a black button for slow feed and red button for fast feed. You can use the fast button to load the bulk of reloading powder and then use the slow button to maximize the accuracy of your load. The control pad is connected to the dispenser by a 24″ cable. That two-foot cable run allows plenty of trickler placement options on your bench. Watch the video review below to see the Omega Trickler in use. (Review by UK-based “1967 Spud”).
Review of Omega Two-Speed Tricker
Omega User Comments
Posting on 24HourCampfire.com, JasonK gave the Omega Trickler high marks: “This thing rocks! It can trickle fast, it can trickle slow, it can drop a kernel or two at a time. After ordering my Omega I quickly shopped for an Acculab VIC-123 scale, accurate to within .02 grains.”
Another Omega user, In2Deep, writes: “You can actually tap the low-speed button and drop kernels while watching the scale. After a little practice it only takes a few seconds to trickle up a load. Using an Acculab 123 scale, it can drop charges that repeatedly read down to around 4 one-hundredth’s of a grain. It turned out to be a tool that really works and saves time. There are rubber feet on the unit and surprisingly it does not cause interference with the digital scale which is often mentioned as a problem with most of the vibratory tricklers. Not many products are even worth the time to do a testimonial but this is a winner[.]”
Forum member Barry O (aka TheBlueEyedBear) has been using an Omega Trickler for a while, and he currently has a second-generation (upgraded) unit on his bench. Barry likes the unit, with some reservations. Barry tells us: “it took me some time to get used to it. One main gripe is the length of time it takes to get the thing primed and ready to dispense powder. But after that, not too bad. I still use my trusty tweezers for fine tuning loads.”
Thanks to Boyd Allen for suggesting this product for review.
Report by Dick Grosbier for theIBS
This past weekend, score shooters from as far away as Florida and Maine gathered at the beautiful Thurmont Conservation & Sportsman’s Club (TCSC) range in Thurmont, Maryland. They were there for the 19th Annual Bud Pryor Memorial Match. This match is also the Maryland State 100-200-300 championship. It is a pivotal match in the Score Shooter Of the Year (SSOY) race because 60 points are up for grabs (as many as are awarded at the Score Nationals).
The Bud Pryor Match is a three-day event. Competitors shoot at 100 yards on Friday, and at 200 yards on Saturday. On Sunday is the infamous 300-yard stage — the “great equalizer” that separates the good shooters from the great shooters.
On Friday morning the 100-yard stage started rainy and miserable (though not too cold). As the day went on the wind picked up some and before we were done I actually compared it to how wet and windy it was in Orrington, Maine two weeks earlier. Herb Llewellyn set a blistering pace at 100 yards, turning in a 250-24X performance in some challenging conditions. He was followed closely at 23X by David Apple. A total of twenty-seven “clean” 250s were shot in VFS class at 100. Also very noteworthy, in Hunter class Dean Breeden shot 250-17X and Gary Long shot 16X.
Saturday at 200 the rain was gone (mostly), and the temperature got up to around 80. All eyes were on Herb Llewellyn after his performance on Friday. He shot the only 50-5X target in match one so many were watching as he planted a 9 on his target on match 3. So much for him (we thought). But Kim Llewellyn ended up on the top of the pile at the end of the day with a 250-10X score. (Kim edged Ricky Read, who also shot 250-10X, under Creedmoor rules). On Saturday, there were six 250s in VFS and Gary Long won Hunter class with a fine 247-3X score. Saturday night we had a great BBQ dinner at the Club House and the 100-yard and 200-yard awards were distributed. (This permitted shooters to leave earlier on Sunday afternoon.)
Score Shooter of the Year — How the Point System Works
The Score Shooter of the Year is determined on a point basis. For a regular two-yardage (with Grand) match (not a State or National Championship), a maximum of 30 Points are available to the winner. That’s 10 for each yardage (100/200) and 10 for the Grand. The same match in a State Championship situation has 45 points available. A National Championship with up to 50 guns in class is worth 20+20+20 or 60 Points. Because it includes three yardages plus a Grand Agg, the Bud Pryor event is a 60-point match just like the Nationals. Likewise the Maine Firecracker held over Memorial Day weekend is also a 60-point match. These 60-point matches are very important because no matter how many matches in which the shooter competes, he only gets to count his ten best in the final standings. My friend Allie Euber, Score Shooter of the Year in 2007 and 2010, notes that these 60-point matches are essential if you want to make a serious run at Score Shooter Of the Year.
Sunday promised to be a tough day of shooting at 300 yards. The warm 83° temperatures, combined with the very wet ground, might have made for horrible mirage. Luckily the day was overcast for the most part. Mirage did get bad a few times but never as horrible as I have seen at Thurmont. Wind was constant and switchy. At the end of the day one lone shooter, Roy Hunter, was clean for the weekend with a 750-26X (and 250-5X at 300). Roy was shooting a 6PPC and his performance was no fluke as Roy was one of only two clean shooters at last years “Bud”.
All in all it was a very full three days of shooting. We had a number of first time attendees most of whom told me they had a great time and looked forward to next years “Bud”. — Dick Grosbier
This item should make you guys smile. An anti-gun organization, StopNRA.org, has shot itself in the foot, figuratively speaking. The StopNRA group, which opposes the NRA and seeks to curtail Second Amendment freedoms, put up a reader poll on its StopNRA.org website. The poll asked: “Do you agree or disagree with NRA gun policies?” Well it turns out that over 71% of respondents AGREE with NRA policies. So, the anti-gun poll has back-fired, big time. View poll results here:
We all know that reloading components have been in short supply in recent months. If you’ve been searching for quality brass, your wait may be over.
A boatload of Lapua cartridge brass has crossed the Atlantic, cleared customs, and is now in warehouses. Many large vendors report that they have ample supplies of Lapua brass in stock now. So if you need some cartridge cases, place your orders today.
Here is a summary of the cartridge types in stock, vendor by vendor. Sorry, no 6mmBR brass on hand at these outfits, but you’ll find most other types of Lapua rifle brass:
Lapua Rifle Cartridge Brass in Stock as of 6/12/2013
Swarovski Optik NA (Swarovski) has completely updated its website at www.swarovskioptik.com. The redesigned web page is divided into three main categories: hunting, nature, and travel & leisure. You’ll find in-depth product information with images, spec sheets and videos. There are easy-to-use, mobile-friendly links for Rifle Scopes, Spotting Scopes, Rangefinders (optronics), Binoculars, and Digiscoping Accessories. The enhanced site also features a Swarovski Blog with articles on optics products, hunting, and tech matters such as ballistics and lens technologies.
Caroline McDonald, Swarovksi Marketing Services Manager, tells us: “The redesign of the website will make it easier for our consumers and dealers to research and learn more about the Swarovski Optik brand and products.” The new website also incorporates an E-Shop, where consumers can purchase most Swarovski products directly, other than rifle scopes. Product descriptions include photo galleries and video clips. Here’s a video of the innovative Swarovski Modular ATX/STX Spotting Scope System:
Swarovski Ballistic Program
Swarovksi’s updated website includes an “Apps” section with software for mobile devices and smartphones. Swarovski currently offers a handy, FREE ballistic calculator App designed for use with Swarovski Distance Reticles or the Ballistic Turret. This App delivers two types of outputs. For Swaro scopes with long-distance reticles, the App generates aiming points. For Swaro scopes with ballistic-matched turrest, the App provides click values for various yardages and wind values. The App is available for iPhone, iPad, and for Android Devices.
In order to promote safe and secure firearms storage, the National Shooting Sportz Foundation (NSSF) has launched its S.A.F.E. Summer Campaign. S.A.F.E. stands for:
Secure your firearms when not in use.
Aware of those around you who should not have unauthorized access to guns.
Focus on your responsibility as a firearm owner.
Educate yourself and others about safe firearm handling and storage.
NSSF has pledged $1 million to provide firearms safety kits (with a gun lock) to gun owners nationwide. Several lock-distribution events will be announced in the coming weeks. Safety information will be provided through social media and the Project ChildSafe website. NSSF reminds us that firearms owners have many ways to safely store their firearms when not in use. Here are some of your options:
Thompson/Center Arms (T/C) has identified a condition that may cause the safety lever on certain ICON®, VENTURE™ and DIMENSION® rifles to bind, preventing the safety from becoming fully engaged. In this situation, closing the bolt may move the safety to the fire position. The rifle will not fire unless the trigger is pulled. Though there should be no risk of the gun going off by itself, T/C states: “Out of an abundance of caution, we are taking this action to recall the rifles so that the firearm can be inspected by our technicians to ensure that the safety lever functions as designed.”
The funnels are priced by size. The 3″-long model is $24.00, the 6″-long model is $27.00, and the big 10″-long model is $31.00. Prices include one (1) adapter. These high-grade funnels will help you load faster and easier, with fewer spilled kernels. We use these funnels and they do work well. The appropriate collars fit your .223 Rem, 6PPC, 6mmBR, Dasher, 6XC, .260 Rem, .284 Win, and .308 case necks just right — not too loose, not too tight. Kernels flow smoothly through the tube without sticking to the sides. The aluminum top section does not seem to attract a static charge so you don’t have to waste time brushing kernels off the funnel after use. We like this product. For high-volume precision reloaders, these funnels are worth the money.
Omega 2-Speed Trickler
On Friday morning the 100-yard stage started rainy and miserable (though not too cold). As the day went on the wind picked up some and before we were done I actually compared it to how wet and windy it was in Orrington, Maine two weeks earlier. Herb Llewellyn set a blistering pace at 100 yards, turning in a 250-24X performance in some challenging conditions. He was followed closely at 23X by David Apple. A total of twenty-seven “clean” 250s were shot in VFS class at 100. Also very noteworthy, in Hunter class Dean Breeden shot 250-17X and Gary Long shot 16X.
We all know that reloading components have been in short supply in recent months. If you’ve been searching for quality brass, your wait may be over.
Swarovski Ballistic Program
