New Giraud Case-Trimming and Chamfering Tool
Giraud Tool has a new case trimmer/chamferer that works with a power drill (or other power source). Giraud’s patent-pending Tri Way Case Trimmer is a self-contained unit powered by your drill or motor. Using a sharp carbide blade it will trim your cases to length, deburr, and cut both inside and outside chamfers — all in one pass. That’s pretty impressive for a $90 tool that fits in the palm of your hand.
Close-up of the Tri Way cutter with clear plastic chip guard removed.
Product Features
1. Fully adjustable for cartridge length (and depth of chamfer).
2. Tool includes carbide blade that cuts a 15° inside case mouth chamfer and 45° outside chamfer.
3. Case holder supported by sealed ball bearing raceway.
4. Tool includes removable, transparent plastic chip guard.
5. Tool can work in any orientation (vertical, horizontal, or any angle).
The Giraud Tri Way Trimmer is designed to be powered by a portable hand drill, drill press, or other dedicated rotating power source. The tool indexes off the shoulder of your cases, but the blade adjusts so that cartridge overall length (COAL) can be controlled with precision. Constructed out of 6061-T6 aluminum and 303 stainless steel, the Tri Way tool should last a lifetime. Note: This tool is not universal. The Tri Way is dedicated to a single cartridge and “related” cartridges with similar body dimensions. Thus you need a specific tool for each cartridge family. For example, the .308 Win tool will also trim .243 Win, .260 Rem, and 7mm-08.
Cartridge Sizes Available for Giraud Tri Way Trimmer:
.223 Remington (Also trims .17 Remington, .204 Ruger, .222 Remington, .222 Remington Magnum)
7.62 x 39mm (Russian)
.300 Blackout (Also trims .17 Rem Fireball, .221 Fireball)
.308 Winchester (Also trims .243 Winchester, .260 Remington, 7mm-08)
.30-06 Springfield (Also trims .25-06, .270 Winchester, .280 Remington)
.300 Winchester Mag (Also trims .264 Winchester Magnum, 7mm Remington Magnum)
Similar Posts:
- Trim, Chamfer, and Deburr Brass Cases with Giraud Tri-Way Tool
- Trim, Chamfer, Deburr Brass with Giraud Tri-Way Trimmer Tool
- Trim, Chamfer, and Deburr Brass with Giraud Tri-Way Tool
- Trim, Chamfer, and Debur Brass with Giraud Tri-Way Trimmer
- Giraud 3-Way Trimmer Works with a Power Drill
Tags: .223 Rem, .308 Win, Case Trimmer, Chamferer, Giraud Tool, WFT, World's Finest Trimmer
After the Crow trimmer it was inevitable they all would come out with these. This looks like a nice unit and is now #3 on the market I believe. I made a similar unit from a cheap Lee trimmer, grinding the pin that goes inside the case to correct length bottoming out on the inside of the case head for the drill press.
The real beauty to this is it will deburr, and cut both inside and outside chamfers. Thats a huge time saver!
Can this fit into a Dillon 1050 or similar press?
How much are additional cutter heads, also will it trim 30-30 win.