September 29th, 2014

Power of the Progressive — When You Need the Speed

When you need ammo fast — lots of ammo, it’s hard to beat a progressive reloading press for output. We use progressive presses to load handgun ammo and .223 Rem cartridges for varmint safaris. With good dies, and proper press set-up, today’s progressive presses can produce surprisingly uniform and accurate ammo. No, you won’t see Benchrest Hall-of-Famers loading PPC cartridges on progressives. However, if you need 1000 rounds for your next prairie dog adventure, you should consider getting a progressive. Below you can see a Hornady Lock-N-Load AP configured to load .308 Winchester in bulk.

Hornady .308 winchester lock-n-load progressive press

CLICK HERE to Read Full Article

ultimate reloader progressive

UltimateReloader.com has published helpful Tips to Optimize Progressive Rifle Loading. No matter whether you have a Red (Hornady), Green (RCBS), or Blue (Dillon) progressive, this article can help you load more efficiently and produce better results. Here are some highlights:

Proper Brass Prep
Just like a good paint job requires good prep work, great rifle ammo requires good brass prep. In order to make sure your rifle loading goes smoothly, make sure to perform the following brass prep steps:

  • Clean the brass (tumble, ultrasonic, etc.)
  • Inspect brass for cracks, deep dents, etc.
  • For military brass: de-prime, ream/swage primer pockets, size with small-base sizer die (small base usually optional).
  • Measure brass length — if too long, size and then trim.
  • Final inspection before loading.
  • Cleaning primer pockets may be something you’ll consider (I don’t clean primer pockets except for rare cases or match ammo).

Smooth and Steady Pace
Since you’re loading rifle ammunition on a progressive, you’re already saving a load of time, so there’s no need to rush things! Attention to detail is super-important for safety and for good results. Always keep an eye on powder level (goes down FAST) and what’s happening at each station.

The Right Press and Press Setup
Look for a heavy-duty, well-built press that will stand up to rifle loading. You’ll also want to make sure your powder measure will have the proper capacity (~25 grains for .223, ~50 grains for 308). If you are bulk reloading, ensure you have enough stations for sizing, charging, powder check, bullet feed, bullet seating, and (optional) bullet crimp.

More Ultimate Reloader Resources for Users of Progressive Presses:

Similar Posts:

Tags: , , , , , ,