Need Primers? Midsouth Shooters Supply (Midsouth) has a large selection of primers in stock right now. Yes Midsouth has the hard-to-find CCI BR-4 primers, as well CCI 450s (small rifle magnum), CCI 200s (large rifle), and CCI 250s (large rifle magnum). Midsouth also has large quantities of Rem 6.5s and Winchester rifle primers. If you need pistol or shotshell primers, Midsouth has plenty of those right now as well.
Get ‘Em While They’re Hot — These are In-Stock Today at 11:00 am ET
Here is a screenshot of some of the more popular rifle primers that were in-stock today (6/19/2014) at Midsouth. If you need ‘em, don’t hesitate to place your orders. You snooze, you loose.
Report based on Story by Kyle Jillson inNRAblog.
Air Rifle Shooters — Do you dream of winning the NRA Indoor National Championships or competing in the Olympics some day? All that may be a few years off, but you can work on becoming an NRA Distinguished Shooter in Sporter and Precision Air Rifle right now…
Making Distinguished in Air Rifle shooting is a goal that can be accomplished by a skilled, dedicated shooter in a few seasons. The discipline you learn along the way will help your overall accuracy with just about any gun. Two separate medallions and lapel pins can be earned by each individual who successfully completes the requirements for both 3-Position Precision and Sporter. Shooters who earn both awards will also receive a Double Distinguished pin.
Steps to Become Distinguish Air Rifle Shooter
So how do you become distinguished? First, you need to be an NRA member. Placing in the top-scoring 10% in a designated tournament (e.g. Indoor National Championships, National Junior Air Gun Championships) will earn a step toward an NRA Distinguished Air Gun Award. Each competitor who makes the same numerical score as the last score in the high 10% will be awarded a step toward NRA Distinguished Air Gun Award. Inner tens will not be used as part of the numerical score to break ties.
It takes a minimum of four (4) steps to be presented with an NRA Distinguished Air Gun Award and you can only earn up to two steps each year. At least one step must be earned for competition in the NRA National Air Gun Championship and Training Summit. Additionally, the steps for 3-Position Sporter Air Rifle or in 3-Position Precision Air Rifle cannot be earned simultaneously. If you’re trying to eventually get both, 3-Position Sporter Air Rifle must be completed first before you can complete steps in 3-Position Precision Air Rifle.
Last week we ran a story on revered stock-maker Jim Cloward of Washington State. Well here’s a story about a very special rifle, featuring one of the finest hand-crafted, custom stocks Cloward ever made. This stunning, heirloom rifle was crafted two decades ago for Shiraz Balolia, President of Grizzly Industrial. Since he hasn’t been shooting it, he initially thought about putting it up for sale. But our Forum members argued: “Don’t sell it Shiraz — that gun should be in a museum or stay in the family!” Shiraz listened and decided to keep the rifle as a family treasure: “It’s off the market and will wait for the grandkids to grow up to decide which one gets it.”
The Balolia Baer/Cloward Heirloom Rifle by Shiraz Balolia
I commissioned this rifle over 20 years ago and am ashamed to say that it has less than 50 rounds down the barrel! This is a super-custom, one-of-a-kind rifle that was built by Bruce Baer and the stock work was done by Jim Cloward. This was a “money no object” gun. The stock was a special highly-figured walnut piece that I had saved for years to build “that special gun”, thinking I would pass it on to one of the kids. It has an Ebony fore-end and an Ebony and Ivory grip cap. The barreled action rides in a barrel block in that beautiful Cloward-crafted stock.
Click Images to See Full-screen Version
Caliber — .308 Baer, made for 1000-yard shooting.
Action — Hall, single shot with Jewell trigger.
Barrel — Obermeyer, fluted, 29″, 1:10″ twist, throated to shoot up to 220gr Sierras.
Stock — Jim Cloward custom with 3-way adjustable buttplate and barrel block.
Scope — Rare silver Leupold 36X Benchrest model in mint condition.
The super-comfortable thumbhole stock is an absolute work of art by Jim Cloward, who did the lovely checkering as well. Jim has done some nice stocks for me, but this one is probably the best. He outdid himself on this stock — I do not think you will ever see another Baer/Cloward rifle like this!
Click Images to See Full-screen Version
One More Cloward-Stocked Rifle
Shiraz has a few other treasured Cloward-stocked rifles, including this stunning break-down hunting rifle in fitted travel case. Click image to see the rifle, full-screen, in all its highly-figured glory. We’ve asked Shiraz to to photograph some of his other “Clowardian” beauties so we might showcase them in the future — stay tuned.
Ultrasonic cleaning machines are great for gun guys. You can clean your brass inside and out, and you can get carbon-coated gun parts (such as AR bolts, muzzle brakes, and muzzle-loader breech plugs) clean as a whistle with no scrubbing. Sound good? Well here’s an opportunity to get a name-brand ultrasonic machine at a discounted price.
Grafs.com Ultrasonic Cleaning Machine Sale
Right now Grafs.com is running a tempting sale on Hornady Ultrasonic Cleaning Machines and accessories. The entry-level Lock-N-Load Sonic Cleaner is marked down from $99.99 to $86.99. The more deluxe Heated L-N-L unit is discounted from $105.99 to $89.99, a 15% savings. This deluxe, 2-liter capacity unit, shown at right, features an 80 watt ceramic heater that enhances cleaning action, particularly for small parts.
The heavy-duty 3-liter L-N-L Magnum Sonic Cleaner with stainless case is now a full 20% off — with the price slashed from $224.99 to $184.99. (Sale price includes shipping after flat $7.95 handling fee). For “power users” who ultrasonically clean large quantities of brass, or regularly clean dirty gun parts, this metal-bodied unit (item #HRN043340) is the smart choice. Its stainless steel housing is durable and easy-to-clean, and the tighter mesh basket allows users to clean smaller parts.
Because it has TWO transducers, the Lock-N-Load Magnum Sonic Cleaner is superior to conventional ultrasonic cleaning machines with just ONE transducer. Moreover, the Lock-N-Load Magnum Sonic Cleaner features an adjustable heating element. This allows the user to dial-in the correct temperature to maximize cleaning efficiency without damaging delicate parts.
After politicians force citizens to register their firearms, what comes next? Laws requiring permits to purchase ammo (with mandatory registration and finger-printing). We kid you not. Right now in California (no surprise), legislators are considering legislation (Senate Bill 53) that would require purchasers of ammunition to register with the state Department of Justice (DOJ) prior to purchasing any ammunition, and to obtain an ammo-purchasing permit.
You would think such a law would be rejected as an extreme “prior restraint” and hence, a violation of Californians’ Constitutional rights. But heck no, quite a few politicians (you guess the party) believe that it is perfectly fine to require pre-purchase registration of ammo buyers. Last week, anti-gun Senate Bill 53 passed in the California Assembly Public Safety Committee by a 5 to 2 vote. SB 53 will now go to the Assembly floor where it could be considered at anytime.
SB 53 would require ammo buyers to register with the state Department of Justice (DOJ) prior to purchasing any ammunition. The registration process would require the submission of fingerprints, background check results, and fees to the DOJ. On top of that, SB 53 would require gun owners to obtain a costly ammunition purchaser permit every two years. In addition, at time of sale, ammo purchasers would have to provide a thumbprint for all ammunition purchases.
It Gets Worse — California Legislation Would Also Ban Mail-Order Ammo Sales
This onerous legislation, SB53, does more than mandate registration of ammo purchasers. It would also ban online and mail-order sales of all ammunition, including hunting ammunition.
The inimitable Jerry Miculek has produced a clever, yet thought-provoking video about concealed and open carry options. If you ever carry a handgun for protection (whether open or concealed), you should watch this video. Jerry offers sensible advice about concealment, gun retention, holster choice, caliber selection, and handgun safety.
Jerry also demonstrates practice drills that help you draw your gun safely and get a round on target quickly. Jerry points out that a gun in your pocket may be useless in a risk scenario if you can’t draw it out quickly and smoothly. Jerry also offers advice on open carry rigs that you might use around a ranch or farm. Miculek believes “ranch carry” rigs should have positive retention so that the gun won’t fall out when the user is climbing in and out of vehicle or doing physical tasks.
Grim news — SHOT Show will be held at the Sands Expo through year 2020. That means six (6) more years* at this “dog” of a facility infamous for its inadequate parking, confusing floor plans, and nightmarish ingress/egress through the Venetian hotel. Then there are the wonderful food courts (NOT). Oh and it’s hard not to think about the scores of people who get sick every year attending SHOT Show at the Sands. If you have been there, you know what we’re talking about. So SHOT Show fans, steel yourselves for six more years of the same sad situation.
Previously, NSSF, the show’s organizer, had agreed to keep SHOT Show at the Sands through 2017. That was bad enough. Now they’ve contracted for even more years at this place. That makes for six additional years of headaches, confusion, disorientation, and general discontent. Oh well…
Anyway, to our great dismay, here is the official notice:
LAS VEGAS-The National Shooting Sports Foundation and Sands Expo and Convention Center have followed up the 2014 record-setting Shooting, Hunting and Outdoor Trade Show (SHOT Show) by adding another two years to their agreement.
Under the new terms, the SHOT Show will be presented at the Sands Expo through 2020.
The 2014 SHOT Show, which ran Jan. 14-17, attracted more than 67,000 in total attendance, an all-time high, and was the fifth consecutive SHOT Show held at Sands Expo. NSSF had previously announced, in February, that it was extending its stay at the venue through 2017.
“We’re pleased with the multi-million dollar investment that the Sands Expo has made in order to meet SHOT Show’s needs,” said Chris Dolnack, NSSF Senior Vice President and Chief Marketing Officer. “The 2014 SHOT Show was the highest rated by both attendees and exhibitors alike, and we want to continue to build on our success here in Las Vegas.”
SHOT Show is the fifth largest trade show in Las Vegas and the largest trade show of its kind in the world.
“As one of the largest events we host at Sands Expo, it has been exciting to watch SHOT Show grow every year,” said Ashlyn LaPorte, Sands Expo Executive Director of Event Management. “We are proud of the partnership that has developed between our venue and show management, and look forward to continuing this relationship through the rest of the decade.”
The Sands Expo and Convention Center houses more than 2 million square feet of meeting and event space. The SHOT Show generates more than $73 million for the Las Vegas economy.
*The press release says “the SHOT Show will be presented at the Sands Expo through 2020″. In the English language, “through” is inclusive; e.g. “Monday through Friday” includes Friday. But then the release says the current contract, which runs through 2017, has been extended by “two years”. That would push the contract out to 2019, not 2020. Maybe you can figure this out… it doesn’t make sense to us. But then having SHOT Show at the Sands in the first place doesn’t make any sense to us at all.
Many of our readers have been interested in learning how modern bullets are made. While a “boutique” bullet-maker, supplied with appropriate cores and jackets, can craft bullets using relatively simple hand dies and manual presses, factory production is different. The major bullet-makers, such as Barnes, employ huge, complex machines to craft their projectiles on an assembly line.
Modern hunting bullets are made with a variety of sophisticated (and expensive) machines, such as Computer Numerical Control (CNC) lathes, giant multi-stage presses, and hydraulic extruding machines that draw lead ingots into lead wire. Barnes offers an “inside look” at the bullet production process in a series of videos filmed at its Mona, UT factory. We’ve embedded four videos from the series here. These videos can also be viewed on the Barnes Bullets YouTube Channel.
Milling Slots in TSX All-Copper Bullet
This video shows how the slots (between the drive bands) in the TSX all-copper bullet are cut. The slots reduce the bearing surface that contacts the rifling. This helps reduce friction and heat, extending the life of barrels used with all-metal, drive-band bullets:
Varminator Bullets Produced in Jumbo Transfer Press
Here is the transfer press used in the production of Varminator and MPG Bullets. The process begins with a giant spool of flat copper material. The copper is stamped into jackets and eventually the formed Varminator bullets are ejected one by one into a bucket.
CNC Lathe Turns Bullets Automatically
In the video below, a Bar-Feed CNC crafts mono-bloc bullets from metal bar stock. Barnes uses a small CNC lathe to turn .50-caliber bullets from brass bar stock. We’re not sure which bullet is being made in this video. The material looks to be sintered metal. In the close-ups you can gold-colored shavings from when the machine was previously used for CNC-turned brass bullets.
Accuracy Testing in 100-yard Tunnel
Barnes regularly tests bullet samples for accuracy. In the video below, a Barnes technician loads sample rounds and tests them for accuracy in a 100-yard tunnel. The rounds are shot through a special fixture — basically a barreled action connected to parallel rods on either side. This allows the testing fixture to slide straight back on recoil (see it move back at 1:07-08 minute mark). Note how the tester actuates the trigger, which is oriented upwards, just the opposite of a normal rifle. The technician taps the upward-pointing trigger shoe lightly with a metal rod. Could this upside-down trigger orientation be useful in benchrest shooting — perhaps with railguns? It could make for an interesting experiment.
Story suggestion by EdLongrange. We welcome reader submissions.
Who is buying ARs and AKs, and in what quantities? Jim Curcuruto, NSSF’s Director of Industry Research, answers those questions in the May 2014 Issue of AR Guns & Hunting. In this interesting article about “Modern Sporting Rifles” (MSRs), Curcuruto provides answers to questions such as “How many Americans own an MSR?”, “Why are they being purchased?”, and “Who is buying them?”.
What the Heck is a ‘Modern Sporting Rifle’?
The term “Modern Sporting Rifles” is used to describe “AR- and AK-Platform rifles” — semi-automatic rifles with detachable box magazines. These are generally derivative of the original AR15/M16 or AK47 designs, although Modern Sporting Rifles may have different furniture, modular components, and scope rails in place of iron sights. Note: The “AR” in “AR-15″ rifle stands for ArmaLite rifle, after the company that developed it in the 1950s. “AR” does NOT stand for “assault rifle” or “automatic rifle.”
MSR Questions and Answers
Q: How may AR-type and AK-type rifles have been sold in recent years?
We don’t have an exact sales number. However, since 1990, over 8,200,000 MSRs have been “brought to market” in the USA. This is based on manufacturing stats, ATF sales records, as well as International Trade Commission (ITC) import numbers.
Q: How Many Americans Own MSRs?
A: 4.8 million American have an AR-type or AK-type rifle, according to a consumer survey and ATF and ITC statistics.
Q: What Kind of People Purchase MSRs?
A: MSRs are purchased by successful, educated people: “The average MSR owner is 35+ years old, married and has at least some college education. 54% of MSR owners have a household income of more than $75,000 and they are spending approximately $1,060 on each MSR[.]” Roughly one-third of MSR owners are active or former law enforcement or military personnel.
Q: Why Do People Purchase ARs and AKs?
A: The main reason Americans purchase MSRs is for “recreational target shooting”. The second most important reason is for home defense.
Cabela’s Web Deals and In-Store Sales
Every year Cabela’s runs a big Father’s Day Sale with some awesome web specials on Cabelas.com. Through end of day, 6/15/2014, you can also get FREE Shipping on orders of $99 or more. Enter promotion code 4DADSDAY during checkout (some heavy items excluded from this offer).
Plus there are in-store-only sales at most Cabela’s retail outlets around the country. CLICK HERE for a list of stores, then click “Store Info” for the store nearest you. That will take you to a page where you can view the Father’s Day flyer for that store.
Below are some hot deals we found for hunters and shooters:
Need Primers? Midsouth Shooters Supply (Midsouth) has a large selection of primers in stock right now. Yes Midsouth has the hard-to-find CCI BR-4 primers, as well CCI 450s (small rifle magnum), CCI 200s (large rifle), and CCI 250s (large rifle magnum). Midsouth also has large quantities of Rem 6.5s and Winchester rifle primers. If you need pistol or shotshell primers, Midsouth has plenty of those right now as well.
Last week we ran a story on revered stock-maker 
Grafs.com Ultrasonic Cleaning Machine Sale
The inimitable Jerry Miculek has produced a clever, yet thought-provoking video about concealed and open carry options. If you ever carry a handgun for protection (whether open or concealed), you should watch this video. Jerry offers sensible advice about concealment, gun retention, holster choice, caliber selection, and handgun safety.
LAS VEGAS-The National Shooting Sports Foundation and Sands Expo and Convention Center have followed up the 2014 record-setting Shooting, Hunting and Outdoor Trade Show (SHOT Show) by adding another two years to their agreement.
Many of our readers have been interested in learning how modern bullets are made. While a “boutique” bullet-maker, supplied with appropriate cores and jackets, can craft bullets using relatively simple hand dies and manual presses, factory production is different. The major bullet-makers, such as 
Q: How Many Americans Own MSRs?
