|
|
June 5th, 2014
The new-for-2014 Caldwell Crosswind Professional Wind Meter does much more than measure wind velocity. Along with Current Wind Speed, this device will measure and display: Average Wind Speed, Max Wind Gust, Temperature, Station Pressure, Barometric Pressure, Altitude, Density Altitude and even Wind Chill factor. Select among mph, ft/min, km/h, m/s, or knots for the wind speed units.
The swiveling impeller head (set parallel to barrel) allows you to determine an interpolated 90° crosswind value to use in your ballistics calculations. This eliminates a lot of guesswork.
You might say, “Why do I need a rotating head, I can just turn the whole wind meter to align the impeller axis with the wind?” Yes you can, but then you merely get a raw speed value, and you have to guesstimate the wind angle, and then calculate your actual windage correction based on the vector.
The rotating impeller ring on the Caldwell simplifies the job of calculating windage. The swivel head is designed to show an effective 90-degree crosswind value, no matter what the actual wind direction. Here’s how it works. Hold the unit with the display screen facing you. Then rotate the impeller head until it aligns with the barrel axis (bullet line of flight). The plastic shell surrounding the impeller is specifically designed so that the blades will spin faster or slower depending on the true wind angle. This allows the unit to estimate the effective 90-degree crosswind value (for your ballistics program). Pretty clever eh? See diagram to understand how this works:
This unit comes complete with rotating anemometer head, protective holster case, and one CR2032 battery. The unit has an auto “Power-Off” feature to preserve battery life. There is also a “Data Hold” function plus an LCD Backlight. NOTE: When figuring effective 90° crosswind values, Caldwell recommends using Average Wind Speed mode rather than Current Wind Speed.
June 5th, 2014
Whidden Gunworks offers a nicely-engineered “bolt-on” front plate that will enhance the bench-rested accuracy of any rifle with an accessory rail on the forearm.
 The Whidden Track Plate fits securely in the forearm accessory rail on prone, cross-the-course, and Palma rifles. These guns typically have a narrow and/or rounded fore-end so they rock and wobble when used with a front pedestal rest. The TrackPlate cures that. Once installed it provides a rock-solid, 2.9″-wide platform that mates perfectly with a benchrest-type front sandbag. This gives sling-shooters maximum stability when testing loads or zeroing their sights or scope. Plus you can now shoot F-Class competitively with a prone gun.
The Track Plate is light-weight, has catamaran-style runners to aid tracking and prevent rocking, and can be easily stowed in a range bag. The machined aluminum Track Plate fits BOTH Anschutz-style and American-style recessed forearm rails.
The Track Plate is available from Whidden Gunworks for $40.99 or from Champion’s Choice for $40.00 (item W29P). Plate designer (and National LR Rifle Champion) John Whidden says: “The Plate is great for any rifle with a rail whether it ís smallbore, centerfire, or an air gun. Now you can try F-Class with your favorite prone rifle: the Plate has a perfect low-drag finish for riding a rest or sandbags and is competition legal in all dimensions.”
Front Bag-Rider for AR-15s from EGW
Similar to the Whidden Track Plate is a 3″-wide Delrin bag-rider from Evolution Gun Works (EGW). This was developed expressly to fit the fore-ends of AR15-type rifles with round float tubes. The EGW front bag-rider attaches to a front sling swivel stud anchor. That allows it to mount as easily as a Harris bipod — no rail needed! Just unscrew the swivel stud, put the front bag-rider in place and attach one hex-head machine screw. The front bag-rider is contoured to match the handguard profile so it fits securely with no wobble. Overall, it is a slick system. Front and rear bag-riders can be attached in a couple of minutes. The Delrin blocks slide easily in the bags and make the gun ultra-stable. The gun tracks straight back. The front bag-rider comes in two (2) variants, a $39.99 radiused version (item 32141) that attaches via swivel stud, and a $49.99 version (item 32143) that mounts via a Picatinny-style rail.
EGW AR Front Bag-Rider System
EGW Picatinny Rail-Attached Front Bag-Rider
EGW Rear Bag-Rider for AR Buttstocks
EGW also offers a REAR bag-rider that attaches via the sling swivel anchor. The EGW AR Rear Bag-Rider accessory (item 32142), designed to work with A2-style buttstocks, sells separately for $39.99. This rear bag-rider provides a longer, straight “keel” that works very well in rear sandbags, giving the rifle more stability, and improving the tracking.
June 4th, 2014
Australian long-range shooter Meichelle K. has customized her gear in a distinctive way. Meichelle hails from a small town called Jimboomba which means “place of loud thunder” in the aboriginal language. Yes indeed, that sounds appropriate for a rifle shooter. We smiled at the “feminine touches” Meichelle applied to her new SEB Bigfoot rear bag. This displays real creativity — and now no one will ever mistake Meichelle’s bag for one belonging to another shooter.
Meichelle regularly shoots F-Class in Australia. She has traveled extensively to compete in major matches. Here is a photo from one of her favorite ranges in Australia. Looks like a beautiful place to shoot. And we love the printed fabric on the range cart! Kisses from Down Under.
Jimboomba — Place of Loud Thunder and Little Rain
Meichelle resides in Jimboomba, a small township located south of Brisbane in Queensland. Jimboomba is named after a sheep and livestock station based where the township is today. The word Jimboomba (originally Gimboomba) is a Gugingin word meaning “place of loud thunder and little rain”. The Gugingin were the first native Australian peoples of this Yugambeh region, now part of Queensland.
View Larger Map
June 4th, 2014
Sinclair International has a good article on Case Lubrication which shows the various products and application methods available. Part of Sinclair’s Step-By-Step Reloading series, the article shows how to apply Spray Lube, Die Wax, or conventional lube from a Pad. The story also explains how to use dry lube to slick up the inside of your case necks.
Spray Lubes
High-volume reloaders often turn to spray-on lubricants such as the RCBS Case Slick (#749-001-341) or the Hornady One Shot (#749-001-065) to quickly lubricate large numbers of cases at once. An indispensable piece of gear that helps make spray lubing easy is a lube rack (#749-011-550) – a polymer block that holds cases upright and arranged to maximize their exposure to the spray.
Editor’s Note: Ballistol Aerosol is other good spray product for regular full-length sizing (not heavy case forming). It goes on clear (no chalky residue), it is ultra-slippery, and it will remove the carbon from your case necks as you apply Ballistol with a patch. This is my primary spray lube — but many folks hate the distinctive Ballistol smell. Try before you buy.
Sizing Die Wax
Over the years, many benchrest shooters have come to trust Imperial Sizing Die Wax (#749-001-052) for their case lube needs. It offers high lubricity and easily wipes off with a paper towel. In fact, its lubricity makes it a popular choice for case forming, for those wildcat folks who need to form their own unique or obsolete cartridges. Unlike lube pads or spray lubes, sizing wax is applied more naturally. You just put a little on your fingers and transfer it to the cases by handling them. As simple and easy as Imperial Sizing Die Wax is to use, it’s probably best for low-volume applications.
Dry Lubricant
Redding’s Imperial Application Media (#749-001-166) is a dry neck lube used to lube the inside of the neck, whether you’re full-length sizing or neck-sizing only. It consists of ceramic spheres coated with a fine graphite-based powder. You simply dip the neck into the container for a second to pick up the right amount of lube. This lube enables the expander ball to work smoothly throughout the case neck –instead of “grabbing” or “chattering” — to minimize case neck stretching.
Editor’s Note: Dry Lube is also very useful if you ultrasonically clean your cases. After the ultrasound process, the inside of the case neck can be so “squeaky clean” that bullets don’t seat smoothly. A quick application of dry lube will help bullets slide into the neck easier and the neck “grip” on the bullets should be more consistent from round-to-round. Consistent neck tension is key to accuracy and uniform velocities.
Story Tip from EdLongrange. We welcome reader submissions.
June 4th, 2014
Report based on story by Ashley Brugnone, CMP Writer/Editor
Would you like to learn AR marksmanship under the tutelage of world-class USAMU team members? Then consider attending the Civilian Marksmanship Program’s Rifle Small Arms Firing School (SAFS), held Wednesday, July 16-17, during the National Rifle and Pistol Matches at historic Camp Perry. SAFS courses have been conducted at the National Matches since 1918. Hundreds of rifle participants are expected this year.
The school is structured toward teaching new shooters, so no past firearm experience is required. Intermediate shooters are also welcome to participate. Students will learn basic firing practices and competition skills. In addition to the live fire practice, students will compete in an EIC Match. All participants will be instructed by members of the U.S. Army Marksmanship Unit (USAMU) and coached by Military Rifle Team Members or CMP Rifle Master Instructors.
CLICK HERE for Small Arms Firing Schools INFO | CLICK HERE for Rifle SAFS Registration.
For those already familiar with rifle shooting, an Advanced Rifle Course will also be held to provide additional class instruction and the chance to fire in a special Excellence-In-Competition (EIC) Match. Whether an experience shooter or picking up a firearm for the first time, come enjoy a day of fellowship and fun in one of America’s oldest pastimes with the security and knowledge of some of the best marksmen in the country!
June 3rd, 2014
Shooting Industry Magazine has released a helpful blog article concerning airline travel and firearms. Written by well-known shooting instructor, gun writer (and part-time police officer) Massad Ayoob, the article covers key points travelers must understand before carrying firearms into an airport zone. In his article Flying with Firearms, Ayoob warns travelers that “State gun laws change frequently” and that “our country is a 50-piece patchwork quilt of gun laws”.
Here are some of the recommended resources gun-toting travelers should consult before they head to any airport in the United States:
Flying with Firearms — Familiarize Yourself With The Laws
by Massad Ayoob
State gun laws change frequently, including reciprocity on concealed-carry permits even in the gun-friendly “red states.” Here are a few sources I recommend for you and your customers.
Online, the best and most up-to-date source of gun laws I’ve found is www.Handgunlaws.us. For smart phones, the best app I can recommend is Legal Heat (www.mylegalheat.com).
The Transportation Security Administration (TSA) and the Federal Aviation Administration (FAA) are the authoritative sources on flying with firearms.
The controlling TSA regulation can be found at www.tsa.gov, search “Firearms.” The FAA’s controlling regulation is 108.11. To view the FAA’s controlling regulation, visit the U.S. Government Printing Office: www.gpo.gov/fdsys, click “Advanced Search” and enter “14 CFR 108.11” — the first result contains the report.
June 3rd, 2014
Here’s a special promotion that could save you $10 – $20 or more when purchasing products from Brownells.com. To celebrate its 75th Anniversary, Brownells is offer a seventy-five cent shipping special. Now through Friday, June 6th, orders over $75.00 ship for just $0.75 (seventy-five cents). To get this special price on standard shipping, use code FB6 during the online check-out process.
 
This 75/75 shipping promotion ends at 11:59 pm CDT on June 6, 2014. This is valid for standard domestic shipping only, and does NOT include hazmat fees or other special handling charges.
June 3rd, 2014
Looking for an up-to-date, comprehensive resource on “tactical” bolt guns, AR-platform rifles, and defensive-style shotguns? Then check out this 500+ page book by “Blue Book” author S.P. Fjestad. The new 5th Edition of the Blue Book of Tactical Firearms Values is the most complete reference book for tactical rifles, handguns, and shotguns. The 5th Edition, published in April 2014, features both new and older tactical guns with detailed model descriptions and current MSRP. All values have been updated to reflect current market conditions.
|
Book Has Glossary and Manufacturers Index
This unique resource includes an updated tactical glossary defining tactical terms with helpful links and illustrations. The book also includes updated directories of firearms, gear, optics, and accessory manufacturers with complete contact information. Almost 200 AR-15 manufacturers and trademarks are covered. Most of the information contained in this 5th Edition of the Blue Book of Tactical Firearms Values is not available anywhere else. Author/publisher S.P. Fjestad is an expert on collectible antique and modern firearms. His best selling Blue Book of Gun Values, the industry standard reference source, has over 1 million copies in circulation worldwide. |
|
June 2nd, 2014
Imagine you’re out in the field and your scope fails or you have a malfunction with your iron sights (maybe the front blade snaps off). You’d think that means you can’t shoot anymore. Well think again. In fact, as Kirsten Joy Weiss demonstrates in this video, it IS possible to shoot a rifle without a scope or conventional sights — and one can do so with surprising accuracy. Trick shot artist Kirsten shows how you can align a corner of your action with a spot at the end of the barrel to aim at your target. With no sights, Kirsten manages to shoot a very respectable group — drilling 4 of 7 shots in one ragged hole.
Watch Kirsten Put 4 of 7 Shots in One Ragged Hole with No Sights
YouTube Link: http://youtu.be/YYpR-WKRA6I
Kirsten created another video earlier this year, where she also did some precision shooting without sights, hitting a pair of bottle-caps at 25 yards. CLICK HERE for Kirsten Bottle Cap Video.
To view all of Kirsten’s videos, visit the Kirsten Joy Weiss YouTube Channel.
June 2nd, 2014
 J.G. Anschütz GmbH & Co. KG (Anschütz), elite German manufacturer of airguns and rimfire arms, recently announced the launch of Anschütz North America (Anschütz NA), a subsidiary enterprise based in the USA. Anschütz NA will distribute and market rifles and shooting accessories for the US market. Importantly, Anschütz NA will provide after-sales service and Warranty work for Anschütz products. Anschütz NA will commence business activities in the USA on July 1, 2014.
Jochen Anschütz, president of J.G. Anschütz GmbH & Co. KG in Ulm, Germany noted, “The USA is a powerful market with a huge demand for Anschütz premium quality rifles. Over the years, the continued interest from the American hunters and target shooters in our fine hunting and high-precision target rifles has given us the confidence to further grow and support this important market.”
“While attending the 2014 SHOT Show in Las Vegas … both I and my father, Dieter Anschütz, [realized] that not only do we need to continue to provide our excellent rifles, but [we need] also to expand our legendary Anschütz service here in America,” he said. “We feel that the best way to support this new growth is to take the distribution and sales service into our own hands.”
Anschütz NA will offer Anschütz after-sales service for all company products, as well as warranty support, repairs, spare parts, and tech info. The established Anschütz distribution chain and main dealer network in the US will continue to operate as before. To learn about Anschütz NA services, contact Customer Relations Manager Steven Boelter at: steven.boelter [at] @anschuetz-sport.com.
Model 1727F (17 HMR) Rifle with Fortner Straight-Pull Action
|
