Need a simple, easy-to-use drop chart for your rifle? Something you can tape right to the buttstock? Then check out Hornady’s handy Online Ballistics Calculator. This user-friendly calculator will compute your drops accurately, and output a handy “Cheat Sheet” you can print and attach to your rifle. Simply input G1 or G7 BC values, muzzle velocity, bullet weight, zero range and a few other variables. Click “Calculate” and you’re good to go. You can select the basic version, or an advanced version with more data fields for environmental variables (altitude, temperature, air pressure, and humidity). You can also get wind drift numbers by inputing wind speed and angle.
Conveniently, on the trajectory output, come-ups are listed in both MOA and Mils — so this will work with either MOA clicks or Mil-based clicks. There are more sophisticated ballistics solvers available on the web (such as the outstanding Applied Ballistics Online Calculator), but the Hornady Calculator is very simple and easy to use. If you just want a basic drop chart, you may want to check this out.
If two barrels are better than one, then why not three? That’s the thinking behind the exotic new BD14 from Blaser, unveiled at the 2014 IWA Show in Germany. This “bockdrilling” three-barrel firearm works as a shotgun, large-caliber rifle, and small-caliber rifle all in one. Even with all those barrels, the BD14 is relatively light, at 3.3 kg (7.26 lbs) without optics. That makes this a nice, carry-around gun for stalking. As you’d expect from Blaser, the twin triggers are crisp and precise, with a pull weight of just 1.43 lbs (650 grams). The front trigger is for the large-caliber rifle barrel, while the rear trigger works both the shotgun and small-caliber barrels, via a tang-mounted selector. Sorry, we don’t yet have a USA-market price on this example of gun-making exotica, but you can bet it will be expensive.
Here’s what Blaser USA has to say about its unique three-barreled BD14:
“The ‘Bockdrilling’ is, put simply, an over/under (O/U) rifle-shotgun combination with a smaller caliber rifle-barrel… on the side. The barrel arrangement [allows] for an extremely slender receiver, making the BD 14 exceptionally huntable.
The brand new Vertical Block Lockup…has been filed for patent. It combines an extremely compact and solid block lockup in a closed system within the monoblock with the comfortable handling of a classic break-action rifle.
The double lock permits, if needed, a rapid second shot, the front trigger always releasing the large rifle-caliber. The … barrel selector actives the shotgun barrel when in position ‘top’ and activates the smaller rifle caliber in position ‘bottom’.”
Story idea from EdLongrange. We welcome reader submissions.
Here’s something that could benefit your local shooting club. The National Shooting Sports Foundation (NSSF) has a Steel Target Grant Program to help shooting ranges that plan to begin or expand NSSF Rimfire Challenge target-shooting events. With support from Action Target, 20 steel target grant packages (valued at $2100.00 each) will be available. The targets are suitable for both indoor and outdoor target shooting ranges (rimfire only). CLICK HERE for more information.
Who May Apply: Any NSSF member ranges that plan to host public NSSF Rimfire Challenge events at least 4 times a year may apply for a target grant. NSSF range members shall be given priority. Ranges can use the steel targets for other matches, such as centerfire pistol competitions, or any other competitions the range wants to create for which the targets are suitable.
GRANT OPTIONS:
Packages will consist of 12 targets, with which participating range recipients can set up two (2) Rimfire Challenge stages. Each grant package will include:
Grant recipients will receive the Evil Roy target stand with their steel target package. If a range needs stand heights taller than 3′ recipients can inform Action Target of this upon confirming their orders. The awarding of grants and the number of grants available is at NSSF’s discretion. The steel target package is valued at $2,100. The Steel Target Grant Program is a cooperative effort between NSSF and Action Target, which provides steel targets to NSSF at a discounted rate.
AccurateShooter.com has a HUGE collection of FREE downloadable PDF targets. We offer a very wide range of target designs: Load Development Grids, NRA Bullseye targets, Official-Size BR targets, Realistic Varmint Targets, Silhouette Shapes, Fun Plinking Targets, and even specialized tactical training targets. If our collection of free targets isn’t enough, or if you want to create a new kind of target — you’re in luck. There’s an Australian-based interactive website, PrintTargets.net that allows you to create your own customized, printable PDF targets.
CLICK Graphic to Create Your Own Targets.
Just follow the step-by-step instructions to set paper size, layout, bullseye color, line thickness, number of rings and diameter. You can even add Score Numbers to your target rings. PrintTargets.net is easy and fun to use. It’s much faster to create targets this way than to try to draw a series of circles with PowerPoint or MS Paint. Power-User tip: PrintTargets.net even offers a handy diamond-grid calibration diagram that you can add to your custom target designs. You’ll find the calibration grid as option #15 when you design your target — just scroll all the way down the PrintTargets.net home page.
Readers often ask us: “Is there an inexpensive way I can get started in position shooting?” The answer is “yes” — across the country CMP-affiliated clubs host Rimfire Sporter matches. You can use a wide variety of .22LR rimfire rifles — manual actions (such as a Winchester model 52) or semi-automatics (such as a Ruger 10/22). There are prone, sitting/kneeling, and standing stages. CMP rules provide separate classifications for scoped rifles, open-sighted rifles, and aperature-sighted rifles. The matches are fun, the ammo is inexpensive, and everyone has a good time while improving their marksmanship.
Our friend Dennis Santiago recently helped run a CMP Rimfire Sporter Match in Southern California. Dennis reports: “You want something challenging? Well that X-Ring 50 yards away is the diameter of a 50 cent piece, and there are people out there that can womp that thing with iron sights.”
The rapid-fire sitting or kneeling stage of a CMP-sanctioned .22 Sporter Match consists of two, 5-shot strings. A manually-operated or semi-automatic rifle may be used for this match. Below is a video Dennis made that shows a sitting/kneeling rapid fire stage.
Dennis notes: “There are six (6) stages of fire on a tough little target. Notice the rifles that can be used run the gamut from pump and bolt actions to variations on the semi-auto theme. All still require a good eye and a steady hold to earn one’s bragging rights for the day. A match takes about an hour and a half per relay. The slowest part of the match is initial sighting in. It’ll take longer than the allocated 5 minutes for the typical first timer coming to a club match.”
At Dennis’s Burbank Rifle & Revolver Club (BRRC), procedures are modified a little bit: “What we typically do at BRRC is run two relays. Experienced competitors shoot per the full rulebook. New shooters are afforded a bit more relaxed environment to make the experience more fun and inviting. We do the same thing in our M-1 Garand Clinic/Match series.”
Rimfire Sporter Match Basics
The CMP Rimfire Sporter Rifle Match is an inexpensive, fun-oriented competition using .22 caliber sporter rifles (plinking and small game rifles) commonly owned by most gun enthusiasts. To compete, all you need is a basic rifle, safety gear, and ammunition. No fancy, high-dollar rifles are required.
The event is shot with standard sporter-type, rimfire rifles weighing no more than 7 ½ lbs, with sights and sling. Rifles may be manually-operated or semi-automatic. Shooters with manually-operated actions are given extra time in the rapid-fire stage to compensate for the difference. (See Video).
There are three classes of competition — the standard “O Class” for open-sighted rifles, “T-Class” for telescope-sighted and rear aperture-sighted rifles and “Tactical Rimfire” class, which is a .22 caliber A4 or AR15 style rifle. Firing for all classes is done at 50 and 25 yards on a target with a 1.78″ ten-ring and an 18″ outer one-ring. Even new shooters can get hits on this target, but it’s still tough enough that no one yet has fired a perfect 600×600 score.
The Civilian Marksmanship Program (CMP) has a CMP Guide to Rimfire Sporter Shooting. This FREE, 50-page digital publication covers equipment, positions, course of fire, rules, scoring and much more. You’ll find helpful “how-to” sections on aiming, sight picture, hold control, and trigger control. Reading these instructional sections can benefit any prone or three-position competitive shooter.
Many shooters prefer to use padded soft cases for their guns. These weigh less, take up less room in vehicles, and store more easily. Unfortunately most soft rifle cases on the market are too short (or not tall enough) to handle scoped rifles with 29″ or longer barrels, particularly if a muzzle brake or extended front site hanger is attached. You can find long soft cases designed for shotguns or long-barreled black powder rifles, but these typically do not have enough clearance (top to bottom) to handle bulky target scopes. Where can you find a quality soft case for a scoped F-Class or Palma rifle with 30″ or longer barrel, making the rifle at least 50-51″ in overall length? Here are some suggestions.
55″ Bald Eagle Match Rifle Case
A good combination of features and value is the 55″-long Bald Eagle soft case from Bullets.com. This case was designed for match competitors with long-barreled rifles (with barrels from 29″ to 32″). This case fits both scoped and iron-sight rifles, and has quality zippers and heavy-duty padding. Large, zippered storage compartments hold log books, chamber flags, and other gear. Available in two popular colors, red and black, this case measures 55″ long, 13″ tall on back end and 6″ tall on front end. It is currently on sale for $57.95. Bullets.com also sells 60″ soft cases, and 50″ soft cases to fit rifles with both longer and shorter OALs.
52″ Creedmoor Sports Soft Case
At the request of many High Power shooters, Creedmoor Sports has created a high-grade 52″x10″ softcase. That’s tall and long enough to fit a Tubb 2000, or AR-based spacegun with long barrel. The Creedmoor case is one quality offering, with nice 1″ thick close-cell foam padding plus tough Cordura nylon on the outside and nylon pack cloth on the inside. Both materials are urethane-coated for water proofing. Another nice feature are the integral backpack straps (see photo left). These free your hands to carry rests, spotting scopes or other gear.
The Creedmoor 52″x10″ case comes in Forest Green ($66.95, N152A), and Royal Blue ($76.95, N152C). Creedmoor also offers a similar, slightly smaller 48″x12″ case for Service Rifles in Green or Blue.
52″ Midsouth Gun Case
For those on a tight budget, Midsouth Shooters Supply offers an Extreme 52″ padded gun case for just $23.00 (item #208-BD240-52). This thickly-padded case is high enough in the center to fit most scoped rifles — even with big Nightforce scopes. Made by Bulldog Cases, the all-black Extreme 52″ case features a soft faux-fur inner lining, an external accessory pocket, and a removable shoulder strap.
If you’ve been following the tactical message boards, you’ll hear a lot of buzz about FrogLube CLP. Among the zillions of gun cleaner/lubes on the market, FrogLube stands out for its ability to work well even in challenging environments. Intended for U.S. Navy SEAL operators’ use in extreme environments, FrogLube was developed by Larry Lasky (Captain, USN retired), a former Navy SEAL officer. FrogLube’s blend of ingredients has been extensively field tested. The makers of FrogLube claim that fouling is dramatically reduced in FrogLube-treated firearms. FrogLube is a decent carbon-cutter and it also provides protection against rust and corrosion (though there are better rust preventers on the market, such as Eezox).
NOTE: Don’t expect FrogLube to remove copper fouling in the barrel — you’ll need a real copper solvent, such as Montana X-Treme. Overall, though, as a general purpose CLP, FrogLube performs well.
FrogLube is now available from major vendors, including Amazon.com and MidwayUSA. Notably, FrogLube is a “green” product that has received the USDA’s BioPreferred designation. On Amazon.com, a 5-piece combo kit with CLP liquid, CLP paste FrogLube, and FrogLube Solvent sells for $30.95 with FREE Shipping (on orders over $35). Amazon’s customers have raved about this stuff:
I was introduced to this product by a Sig armorer. I tried it. I loved it. It works. Period. Just like everyone else is saying here. Here is my break down of it as a CLP. The “C”: I have found that putting it on warm metal makes it work great…just like they say. I rub the paste on, let it sit and penetrate. A few minutes later….wipe it off. Clean enough to eat on. I even tried it on my mountain bike chain and components after running out of degreaser. Worked better than anything I have ever tried. The “L”: Once you use it on the parts you will notice it’s still there, having saturated the parts. Great for lube and goes a long way. The “P”: I hunt waterfowl in very rugged and sloppy conditions. The thing about this product is that when they say it saturates the metal, it truly does. Great protective features. It’s still on there and after all that moisture not speck of rust anywhere, unlike even the best of of other CLPs. — J. Zabick
Crazy Good — This stuff is amazing. I use it on my knives, razors and, of course, guns. It smells great, leaves no oily residue and cleans like nothing else I have used. Get the paste and the oil because sometimes the oil is called for and sometimes you need the paste. Can’t recommend it enough. I have already ordered more. — K. Chariton
Norma has released a fascinating video showing how bullet, brass, and ammunition are produced at the Norma Precision AB factory which first opened in 1902. You can see how cartridges are made starting with brass disks, then formed into shape through a series of processes, including “hitting [the cup] with a 30-ton hammer”. After annealing (shown at 0:08″), samples from every batch of brass are analyzed (at multiple points along the case length) to check metal grain structure and hardness. Before packing, each case is visually inspected by a human being (3:27″ time-mark).
The video also shows how bullets are made from jackets and lead cores. Finally, you can watch the loading machines that fill cases with powder, seat the bullets, and then transport the loaded rounds to the packing system. In his enthusiasm, the reporter/narrator does sometimes confuse the term “bullets” and “rounds” (5:00″), but you can figure out what he means. We definitely recommend watching this video. It’s fascinating to see 110-year-old sorting devices on the assembly line right next to state-of-the art, digitally-controlled production machinery.
Video tip by EdLongrange. We welcome reader submissions.
Want to learn the basics of position shooting? Then you should check out an article by Gary Anderson, DCM Emeritus, in On the Mark digital magazine (Summer 2014, pp. 6-13). This article covers all the key elements: body position (prone, sitting, standing), sling use/adjustment, sight picture, aiming process, and trigger control. While this 8-page article was specifically written for Rimfire Sporter shooters, the techniques described by Anderson apply to all types of position shooting, whether you shoot air rifles, smallbore rifles, or centerfire rifles.
Here’s what Anderson says about aiming — how to keep your sights steady and get them centered on the middle of the target:
Trigger Contact and Center As soon as aiming at the target begins, the index finger must move from the trigger-guard to contact the trigger. It is important to get initial pressure on the trigger as soon as aiming begins. Then the shooter must focus on the sight picture and centering the sight picture movements over the aiming point. No one, not even champion shooters, can hold the aligned sights perfectly still. The sights are going to move a little bit or a lot, depending on the shooter’s skill level. The secret is to center those sight picture movements over the aiming point on the target (see trace illustration) before pulling the trigger.
When the sight picture movements on the target are centered, the last step in firing the shot is to add… smooth pressure on the trigger until the shot breaks.
Anderson also discusses the 5 Basics of Shot Technique:
The Tipton Gun Vise is ON SALE for just $39.99 at Amazon.com. That’s a 22% savings over the normal $50.99 price at MidwayUSA. Plus, at the current time, Amazon.com is offering FREE Shipping (subject to change). That’s a very good deal for a tough, versatile product you’ll use for years. This Editor has used one of these for more than a decade (with all sorts of rifles) and it is still going strong.
Owner/User Report This Editor owns one of these injection-molded gun cradles. It has handled everything from an 18″-barreled lever gun to a 32″-barreled F-Class rifle. The unit works well for many tasks: cleaning barrels, stock refinishing/bedding, scope mounting, trigger adjusting, bore-scoping barrels, and checking throat length with a Hornady OAL tool. To be honest, I can’t understand how any serious shooter can get along without a product such as this (MTM makes a similar plastic cleaning cradle). That said, the unit isn’t perfect. We did find a couple very nose-heavy 1000-yard benchrest rifles that were not stable on the Tipton. This gun vise will NOT fit rifles with forearms wider than 3 inches. And if your butt-stock is very shallow (vertically) from comb down to toe, it may not fit the clamping system very well.
There are a number of smart features on the Tipton Gun Vise. First it’s made of solvent-resistant plastic. I’ve spilled just about every “miracle bore cleaner” you can name and nothing has harmed the plastic so far. Second, the front support has a dual-profile rubber pad with a flat section for benchrest rifles plus a “V” in the middle for narrow-forearm rifles. Third, the base section has handy cut-outs that hold solvent bottles or patches. Some people complain that the 8-lb Tipton Gun Vise is too light. While I understand that concern, the Vise is stable in use and I like the fact that I can easily pick up the whole unit with one hand and move it around the loading room. You can always add weight.
Need a simple, easy-to-use drop chart for your rifle? Something you can tape right to the buttstock? Then check out Hornady’s handy Online Ballistics Calculator. This user-friendly calculator will compute your drops accurately, and output a handy “Cheat Sheet” you can print and attach to your rifle. Simply input G1 or G7 BC values, muzzle velocity, bullet weight, zero range and a few other variables. Click “Calculate” and you’re good to go. You can select the basic version, or an advanced version with more data fields for environmental variables (altitude, temperature, air pressure, and humidity). You can also get wind drift numbers by inputing wind speed and angle.
Our friend Dennis Santiago recently helped run a CMP Rimfire Sporter Match in Southern California. Dennis reports: “You want something challenging? Well that X-Ring 50 yards away is the diameter of a 50 cent piece, and there are people out there that can womp that thing with iron sights.”
52″ Creedmoor Sports Soft Case
If you’ve been following the tactical message boards, you’ll hear a lot of buzz about FrogLube CLP. Among the zillions of gun cleaner/lubes on the market, FrogLube stands out for its ability to work well even in challenging environments. Intended for U.S. Navy SEAL operators’ use in extreme environments, FrogLube was developed by Larry Lasky (Captain, USN retired), a former Navy SEAL officer. FrogLube’s blend of ingredients has been extensively field tested. The makers of FrogLube claim that fouling is dramatically reduced in FrogLube-treated firearms. FrogLube is a decent carbon-cutter and it also provides protection against rust and corrosion (though there are better rust preventers on the market, such as Eezox).
Norma has released a fascinating video showing how bullet, brass, and ammunition are produced at the 
As soon as aiming at the target begins, the index finger must move from the trigger-guard to contact the trigger. It is important to get initial pressure on the trigger as soon as aiming begins. Then the shooter must focus on the sight picture and centering the sight picture movements over the aiming point. No one, not even champion shooters, can hold the aligned sights perfectly still. The sights are going to move a little bit or a lot, depending on the shooter’s skill level. The secret is to center those sight picture movements over the aiming point on the target (see trace illustration) before pulling the trigger.
This Editor owns one of these injection-molded gun cradles. It has handled everything from an 18″-barreled lever gun to a 32″-barreled F-Class rifle. The unit works well for many tasks: cleaning barrels, stock refinishing/bedding, scope mounting, trigger adjusting, bore-scoping barrels, and checking throat length with a Hornady OAL tool. To be honest, I can’t understand how any serious shooter can get along without a product such as this (MTM makes a similar plastic cleaning cradle). That said, the unit isn’t perfect. We did find a couple very nose-heavy 1000-yard benchrest rifles that were not stable on the Tipton. This gun vise will NOT fit rifles with forearms wider than 3 inches. And if your butt-stock is very shallow (vertically) from comb down to toe, it may not fit the clamping system very well.
