October 8th, 2015

Learn Position Shooting Techniques from Gary Anderson

rimfire sporter position shooting Gary Anderson

Want to learn the basics of position shooting? Then you should check out an article by Gary Anderson, DCM Emeritus, in On the Mark digital magazine (Summer 2014, pp. 6-13). This article covers all the key elements: body position (prone, sitting, standing), sling use/adjustment, sight picture, aiming process, and trigger control. While this 8-page article was specifically written for Rimfire Sporter shooters, the techniques described by Anderson apply to all types of position shooting, whether you shoot air rifles, smallbore rifles, or centerfire rifles.

CLICK HERE to load On the Mark eZine and Read Gary Anderson Article (page 6-13)
NOTE: This is a large PDF Document — it may take some time to fully load.

Here’s what Anderson says about aiming — how to keep your sights steady and get them centered on the middle of the target:

Trigger Contact and Center
rimfire sporter position shooting Gary AndersonAs soon as aiming at the target begins, the index finger must move from the trigger-guard to contact the trigger. It is important to get initial pressure on the trigger as soon as aiming begins. Then the shooter must focus on the sight picture and centering the sight picture movements over the aiming point. No one, not even champion shooters, can hold the aligned sights perfectly still. The sights are going to move a little bit or a lot, depending on the shooter’s skill level. The secret is to center those sight picture movements over the aiming point on the target (see trace illustration) before pulling the trigger.

When the sight picture movements on the target are centered, the last step in firing the shot is to add… smooth pressure on the trigger until the shot breaks.

Anderson also discusses the 5 Basics of Shot Technique:

rimfire sporter position shooting Gary Anderson

Similar Posts:

Tags: , , , ,