|
|
March 4th, 2016
It’s March 4th today, and that means St. Patrick’s Day is coming up in a couple weeks. To help celebrate that traditional day of Irish pride, parades, and green beer, the NRA has created two (2) fun targets you can download, print, and shoot.
The first target features a large four-leaf clover in the middle, with 17 other smaller three-leaf shamrocks around the outside. With five black bulls-eyes in the center graphic, that gives you a total of 22 aiming points for shooting fun. For added challenge we suggest you set this target at 100 yards for rimfire rifle and 200 years for a centerfire gun.
The second target offers the legendary Pot of Gold at the end of the rainbow. Along with a big bullseye on the pot, there are 15 shamrocks in gold circles, plus five small gold bars with tiny bullseyes. Those smallest bulls will be a challenge even at 100 yards. You’ll need a half-MOA (or better) rifle to “clean” this target, hitting the smallest red dots.
Whether you’re Irish or not, these targets will hopefully bring you a bit of luck. Click each image above to open a high-rez PDF file that you can print out. Then, this St. Patty’s day, wear your green, grab your gear, and head to range for some fun shooting.
March 4th, 2016
CAPTION: LB Bar Ranch — South Fork, Cody, Wyoming. Photo circa 1953-1955, by Les Bowman.
Imagine having multiple “founding fathers” of the modern American gun industry all on the same hunting trip. Well it really happened. A few years back, the cover of the Huntington Die Specialties Catalog featured a wonderful vintage photo, taken in the early 1950s. You can see (left to right): Norm Williams, Bill Ruger, Warren Page, Joyce Hornady, and Claude Willey. Of course you’ve heard of Joyce Hornady, co-founder, with Vernon Speer, of Hornady Manufacturing. Bill Ruger co-founded Sturm, Ruger & Co. with Alexander Sturm in 1949. After Sturm died in 1951, Bill Ruger ran the company for five decades, before passing in 2002. Warren Page was a famous cartridge wildcatter, and Gun Editor of Field & Stream magazine. We couldn’t find information on Clyde Wiley or Norm Williams, and we certainly don’t know why Norm is wearing a bow-tie and top coat! Perhaps our readers can tell us more about Wiley or Williams.
Background of Hornady Manufacturing
Joyce Hornady was an ardent shooter who needed a steady supply of accurate bullets. While the bullets available in the late 1940s were usable, Joyce felt that better bullets could be made. During World War II, Joyce had taken a job in a guard training unit at the Grand Island Army Ammunition Plant. Following the war, shooters and hunters used some of the vast surplus of military ammunition for their sport shooting. This surplus ammunition however, did not offer the accuracy or performance needed for target shooting, big game or varmint hunting.
Joyce realized the need for better bullets and he responded to it. In 1949, he and his original partner Vernon Speer built a machine that converted spent .22 rimfire cases into bullet jackets, and then into bullets. These bullets sold well all over the country. Using a surplus bullet assembly press, he also began to produce a .30-caliber bullet that became a mainstay of Hornady’s bullet line. In 1958, the company moved to a larger 8,000-square-foot plant with a 200-yard underground testing facility. Before that underground range was completed, Joyce Hornady would drive to the Grand Island Rifle Range, winter and summer, rain or shine, to test each individual lot of bullets.
Story sourced by Edlongrange
March 3rd, 2016
M-K IIA2 GEN2 Tactical Trigger from The Wisconsin Trigger Co.
Gear Review by Johnny Fisher
Do you shoot an AR-platform rifle? Here’s an excellent trigger upgrade option that has recently returned to the marketplace. The Wisconsin Trigger Company (WITC) has resumed production of the legendary Milazzo-Krieger M-K II trigger for the AR-platform rifles. Not merely marketing a replica of the original Milazzo-Krieger design, Wisconsin Trigger now offers an enhanced, drop-in version called the M-K IIA2. An easy install, the Milazzo-Krieger trigger drops in with no special tools or machining required (and no modification of the safety selector switch).
For those who are looking for an extremely crisp AR15 trigger that closely mirrors the “feel” of a finely tuned M1 / M14 trigger, this trigger might be the solution. The first stage is exceptionally clean and smooth due to a proprietary diamond-grinding process. I felt that the first stage travel was longer than a Geissele, but many guys will prefer that. Upon reaching the very noticeable and defined “wall” of the second stage, a further increase of pressure provides the instantaneous snap one looks for in a high-quality trigger — complete with a total absence of anything resembling creep or slop.
If you follow the instructions in the box and watch WITC’s informative how-to videos, installation of this trigger is extremely straightforward, requiring no special tools or fitting.
As supplied straight from the factory, the first stage requires about 2.25 pounds of take-up before encountering “the wall” of the second stage. For this purpose of this review and to ensure “making weight” in CMP Service Rifle Competitions, the (white) 5-lb. disconnector spring was used. The weight of the second stage came in right at an extremely repeatable 5 lb. 3 oz. (averaging +/- 1.5 oz.) for a ratio of about 40/60 between the two.
Upon release of the hammer, the disconnector reset is decidedly short. National Match shooters in particular will appreciate the very short but easy-to-recognize trigger reset during rapid-fire strings.
Tuning the Trigger Before Installation
As with most National Match-grade triggers on the market, the Millazo-Krieger utilizes proprietary pins that come supplied with this unit. They must be used for final installation and are purposely oversized to a specific diameter for a very snug fit. This is to ensure the trigger and hammer rotate solely on the pins, as opposed to the pins eventually rotating inside the receiver. It is best to use standard sized mil-spec trigger and hammer pins for the setting of tensions (trigger weight) before final installation to help avoid undue wear to the receiver pin holes. Final adjustment of second-stage pull weight must be done BEFORE final installation.
It is recommended to first set the amount of desired disconnector engagement by performing a very simple process that is detailed in the included installation instructions from the TOP of the trigger. The swapping out of disconnector springs and final tuning of the second stage can then be done, but only from UNDERNEATH a disassembled trigger.
The disconnector tensioning springs are easily swapped out by removing the spring plug from the bottom of the trigger housing that exposes the spring pocket. After inserting the desired weight spring, the spring plug must be installed at least flush with the bottom of the trigger housing. Installing it deeper will add trigger pull weight on the second stage. Installing it too shallow will interfere with trigger movement.
 Transferable Warrnty:
The Wisconsin Trigger Company offers a full lifetime warranty to all unaltered parts of its triggers. This lifetime warranty is fully transferable when the trigger is sold to a new user! When have you heard of an AR component manufacturer with a transferable warranty — we’re impressed.
Not just a retailer, John Scandale of Keystone Accuracy is a distributor of these triggers. He currently has many in stock and for sale at a very special introductory price.
What Comes in the Box:
The $265.75 trigger kits come complete with everything you need: Trigger unit assembly, trigger return spring, full strength hammer spring, two proprietary oversized trigger & hammer pivot pins and three disconnector tensioning springs (3.25 lb., 4.5 lb., 5.0 lb.). Also included is a comprehensive installation manual, a color-coded disconnector spring selection chart, some promotional items, and the lifetime warranty card.
March 3rd, 2016
The U.S. House of Representatives. in a decisive 242-161 vote last week. passed H.R. 2406, the Sportsmen’s Heritage and Recreational Enhancement (SHARE) Act. Because the SHARE Act is the most important pro-sportsmen and pro-hunting legislation in a generation, this legislation was a top priority for the National Shooting Sports Foundation (NSSF). Twelve Democrats joined the Republican majority to ensure passage. Only four Republicans voted against the SHARE Act. All attempts to amend the legislation with unfavorable provisions were defeated. Favorable amendments were passed. Read the NSSF press release.
March 2nd, 2016
 How about a game of “Cartridge Chess”, with chess pieces sourced from your own ammunition collection? We think the concept of a Cartridge Chess Set is pretty clever, and it’s bound to be a conversation-starter at home or at the hunting lodge. With a little creativity, our readers could make their own Chess Sets like this, using a variety of cartridge types.
Create Your Own Cartridge Chess Set
This is a 3-D rendering found on the Cheaper Than Dirt Facebook page. We’d like to see a chess set with actual cartridges (assembled without powder or primers), perhaps with .32 ACP pawns and the 50 BMG and .338 LM as King and Queen.
Challenge: How many cartridge and shotshell types can you identify? The Pawns look like 9mm or 40sw pistol cartridges, while the Rooks (Castles) are obviously 12ga shotgun shells.
What’s Wrong with This Picture?: How many of you sharp-eyed chessmasters noticed a mistake in the placement of the “Royals” in the Cheaper Than Dirt 3-D rendering. Hint — look at the grid layout (top left) for the correct placement of Kings and Queens.
March 1st, 2016
Report by Johnny Fisher
Here’s something you don’t see very often — a fullbore shooter with a .223 Remington topped a field of talented .308 Win shooters. Not only that, he scored more points than any F-Class competitor (however, F-Classers shot a smaller target). Bob Gill’s performance proves that, even in an era of high-BC .308 bullets, the little .223 Rem cartridge can still hold its own in the hands of a great shooter.
At last weekend’s California State Fullbore Championships, Bob Gill bested over 30 competitors for the championship with a .223 Palma rifle, only dropping 7 points over the weekend for a 993-56X. The event was sponsored by the California Rifle & Pistol Association and hosted by the Coalinga Rifle Club.
Bob Gill Talks about the ‘Mental Game’
Conventional wisdom when shooting any match is to just stay focused on each and every shot and let the scores work themselves out after all firing is complete. “Two To The Mound” shooting changes all of that, as each competitor is not only aware of their own standings throughout the course of the match – but also of their closest competitor during these pair-fire strings. With this championship never further out than a 2-point lead throughout the weekend, stress was high and every once of mental focus needed to be tapped.
Bob recalls, “The entire match was neck and neck. After a few mental mistakes and a few wind mistakes, with three shots remaining the thought is three shots and a 1X lead. I need to shoot three 10s. Everything else goes away. Shoot three 10s and he can’t catch me.”
Three 10s later, Bob won the CA State Fullbore Championship by one point and one X. Well done!
Gun Specifications
Bob was shooting a 1970s-era .223 Remington B-40X action inside a Competition Machine R1 chassis. The barrel is a 30.5″ Heavy Palma taper, 1:7″-twist Brux with a Wylde chamber and .220 freebore done up by Randy Gregory at Accuracy Unlimited. The Tubb 7T7 two-stage trigger was set at 1 + 1 pounds.
.223 Remington Accuracy Load — Berger 90gr VLDS, Varget and BR4s
Gill loaded 90gr Berger VLDs in front of 25.0 grains of Hodgdon Varget powder, jumping 15 to 20 thousandths for a 2.708 COL with a BR4 primer inside Lapua brass. Bob uses a Redding Full-Length S-Die to push the shoulders back .004 to match that of new Lapua brass and a bushing chosen to achieve .004 neck tension. He sorts his brass by weight into 0.5 grain lots and each piece is trimmed on a Giraud trimmer after sizing because he says “it grows like crazy”.
Fullbore Course of Fire — Pair Firing on Day 2 at Coalinga
The Fullbore Course-Of-Fire for this match was squadded on the first day by classification for 15-shots string-fire at each yard-line: 300 / 600 / 900 / 1000 yards. These scores were then used to determine “two to the mound” squadding for the second day, when each competitor pair-fired with his closest competitor, and also kept score in between his own shots. In this “pair fire” arrangement, only 45 seconds are allowed between shots after a shooter accepts his shot score. This forces competitors to shoot through condition changes as opposed to waiting for a more favorable pattern.
CLICK HERE for CA Championship Individual Results | CLICK HERE for Team Results
March 1st, 2016
An impressive new rifle action was just announced by BAT Machine and Bullet Central. This new action, dubbed the “Neuvo”, has many impressive features, and it certainly looks like nothing else on the market. Hall of Fame Shooter Dwight Scott provided design input for the Neuvo action.
Bullet Central says much careful design and engineering went into this new action: “The Neuvo … action is the result of more than half a century of experience in rifle building, gunsmithing, target shooting and high-end machining. Bullet Central, Dwight Scott, and BAT Machine teamed up to develop this receiver. The Neuvo encompasses time-proven functionality with a host of brand-new features. The new action includes a wide-body, two-lug bolt, horizontal locking lugs and a totally redesigned fire control system. The Neuvo is manufactured by BAT Machine in the U.S.A. and available at Bullet Central.”
After reviewing early photos of the BAT Neuvo action, Forum member Alex Wheeler liked what he saw: “This action has some features that do set it apart. A full-diameter two-lug will open very nice due to the shallower cocking ramp angle allowed by the large-diameter bolt. There is no lug raceway, so it [could be safer] in an over-pressure situation. I also think that full-diameter bolts run smoother due to not having lugs to bind. I hope to get to handle one of these to really look it over. The big thing will be the fire control — that will make or break it in my opinion.”
March 1st, 2016
Here’s a handy product for pistol shooters and 3-Gun competitors. The NRA Handgunner Backpack provides a convenient transport solution for your pistols, magazines, and assorted range gear. This product offers all the carrying capacity of a large range bag, in a design that, when worn on your back, leaves your hands free to haul long-gun cases, target frames, spotting scopes, or other bulky hardware. Measuring 17″ wide, 22″ high and 9″ deep, the pack has plenty of room for your gear.
 Quad-Pistol Gear Hauler
The cleverly-designed Handgunner Backpack carries up to four pistols. Undo the zipper, slide out the compartment, place your pistols in one of the four foam gun cradles. Store your magazines in a zip-up side pocket with six (6) individual mag sleeves. There are also specially designed compartments for ammo boxes, muffs, protective eyewear, target stapler, and more. You’ll find handy embroidered patches showing the right spot for each gear item.
Lars Dalseide, editor of the NRAblog, tells us this pack is comfortable and sturdy. The shoulder straps and the rear back panel feature moisture-wicking padding and the pack comes with a waterproof cover. And the pack won’t collapse when you set it on a bench — it stands up on its own.
We’re impressed with the design and features of this pack. A lot of smart thinking went into its design. As you might expect though, because the Handgunner Backpack has so many features, it’s not cheap. This specialized backpack sells for $119.95 at the the NRA Online Store. We don’t think that’s too much, considering what this pack can do. This could be a sweet Xmas gift for the pistolero or 3-Gun shooter in the family. If you are running a shooting match, the Handgunner Backpack would make a great prize — way more useful than a walnut plaque.
|
