This article first appeared in 2014. We are reprising it at the request of many readers who are fans of the .30-06 cartridge.
The “Old Warhorse” .30-06 Springfield cartridge is not dead. That’s the conclusion of Forum member Rick M., who has compared the 1000-yard performance of his .30-06 rifle with that of a rig chambered for the more modern, mid-sized 6.4×47 Lapua cartridge. In 12-16 mph full-value winds, the “inefficient and antiquated” .30-06 ruled. Rick reports:
“I was shooting my .30-06 this past Sunday afternoon from 1000 yards. The wind was hitting 12-16 mph with a steady 9 O’clock (full value) wind direction. My shooting buddy Jeff was shooting his 6.5×47 Lapua with 123gr Scenar bullets pushed by Varget. Jeff needed 13 MOA left windage to keep his 6.5x47L rounds inside the Palma 10 Ring. By contrast I only needed 11.5 MOA left windage with my .30-06. I was shooting my ’06 using the 185gr Berger VLD target bullet with H4350. I managed the same POI yet the .30-caliber bullet only needed 11.5 MOA windage. That’s significant. From this experience I’ve concluded that the Old Warhorse ain’t quite dead yet!”
Rick likes his “outdated” .30-06 rifle. He says it can deliver surprisingly good performance at long range:
“To many of the younger generation, the Old Warhorse .30-06 is ‘outdated’ but I can guarantee that the .30-06 Springfield is a VERY ACCURATE cartridge for 1000-yard shooting (and even out further if need be). With some of the advanced powders that we have today, the .30-06 will surprise many shooters with what it’s capable of doing in a good rifle with the right rate of twist. My rifle has a 1:10″ twist rate and I had it short-throated so that, as the throat erodes with time, I could just seat the bullets out further and keep right on shooting. My recent load is Berger 185gr Target VLDs pushed by IMR 4350. This is a very accurate load that moves this bullet along at 2825 fps.”
Share the post ".30-06 Revisited — The ‘Old Warhorse Ain’t Dead Yet’"
Yesterday, April Fools Day, websites offered their best prank stories to readers. Our own 7.6 Creedmoor satire fooled more than a few folks it seems. There were some pretty good spoof videos as well, none better than this very funny production from our friends at Vortex Optics. The video showcase Vortex’s new C.O.B.R.A., a state-of-the-art smart-scope with the capabilities of an Alexa-type digital assistant. Watch the video — you’ll see that the clever C.O.B.R.A. has a mind of its own. Enjoy!
C.O.B.R.A. from Vortex
Introducing Vortex C.O.B.R.A., the Combat Optic Battle Ready Assistant, a virtual personal assistant fine-tuned with features specifically for hunters and shooters. Embedded into select Vortex riflescopes, you can now control your smart-scope with the power of your voice. Bore-sighting, dialing turrets, adjusting magnification, and setting your zero stop are just some of the hundreds of tasks that can be accomplished with simple hands free commands. Get C.O.B.R.A, and get your scope working for you!
Share the post "Vortex C.O.B.R.A. Smart-Scope + Personal Assistant"
The 17 Mach 2 (aka “17 HM2″) is making a come-back. We’re glad. This high-velocity round fits actions and magazines designed for the .22 LR, so it’s an easy barrel-swap upgrade for most rimfire bolt-guns (semi-autos are more complicated). The 17 Mach 2 cartridge doesn’t deliver the velocity of the 17 HMR, but it is still way faster than a .22 LR. Expect 2000-2100 fps with 17 Mach 2 compared to 1250 fps for “High-Velocity” .22 LR ammo. And, importantly, 17 Mach 2 ammo is much less expensive than 17 HMR. If you shop around, you can get 50 rounds of 17 Mach 2 for about $6.50. That’s 40% cheaper than the average $11 price of 17 HMR — a significant savings!
17 Mach 2 Major Selling Points:
1. 60% more velocity than typical “High-Velocity” .22 LR ammo.
2. 40% less cost than average 17 HMR ammo.
3. 17 Mach 2 OAL is compatible with .22 LR receivers and magazines.
Toggle Bolt Volquartsen Summit in 17 HM2
It’s rare for us to see a new rimfire that we’d really like to own, but the new Summit from Volquartsen fits the bill. This versatile rifle features a cool, straight-pull toggle bolt, similar to those on elite Biathalon rifles. You can see how this gun shoots in this informative 22 Plinkster video:
22 Plinkster Tests Volquartsen Summit Rifle in 17 Mach 2
The 17 Mach 2 (17 HM2) is making a comeback. Now leading manufacturers are offering this efficient little rimfire cartridge in some nice rifles. Both Anschutz and Volquartsen will offer new 17 Mach 2 rifles in 2019. The Volquartsen Summit features a lightweight, carbon fiber-wrapped barrel threaded 1/2-28 for brakes or suppressors. The Summit boasts a nice 1.75-lb trigger pull. The Summit’s CNC-machined receiver features a +20 MOA Rail. NOTE: The video shows a silhouette-style laminated wood stock. However, the Summit comes standard with a composite Magpul stock that actually works better for shooting from a bench.
17 Mach 2 — Best Rimfire Bang for the Buck?
If you are looking for a capable, squirrel-busting round or a fun plinking round, you should definitely consider the 17 Mach 2, especially since CCI has committed to production of the little cartridge. CCI recently rolled out its “Gen 2″ 17 Mach 2 VNT Ammo with polymer tip (photo right).
The 17 Mach 2 propels the same 17gr bullet as the 17 HMR, but the 17 Mach 2 runs roughly 20% slower — 2000-2100 fps vs. 2500 fps for the 17 HMR.
Considering that 17 HMR ammo is now running $10 to $12 a box, the 17 Mach 2 is an excellent value by comparison. When you consider overall “bang for the buck”, for many shooters, it makes sense to use the 17 Mach 2 rather than a 17 HMR. You save money, barrel life is a little longer, and the 17 Mach 2 is still a much more potent cartridge than the .22 LR. Check out this comparison, and note how the 17 Mach 2 has a much flatter trajectory than the .22 LR:
Hornady’s 17 Mach 2 has a 2100 FPS muzzle velocity vs. 1255 FPS for “High-Velocity” .22 LR.
Share the post "17 Mach 2 Straight-Pull Summit Rifle from Volquartsen"
Leveraging the incredible success of the 6.5 Creedmoor cartridge, ammo-makers and rifle manufacturers have teamed up to produce a bigger Creedmoor cartridge — the 7.6 Creedmoor. The latest addition to the Creedmoor line gets its name from its 7.62mm bullet dimension. Yep, that makes it a .30-cal cartridge, but the creators stuck with the metric title for consistency. Makes sense. We like the way “7.6 Creedmoor” sounds and we bet consumers will too. The 6.5 Creedmoor has been a singular success — it is by far the most popular new cartridge introduced in the last decade. We think the 7.6 Creedmoor could become equally successful in short order.
In creating the new 7.6 Creedmoor, the product engineers were primarily concerned with accuracy, reliability, and compatibility. In a brilliant marketing stroke, the 7.6 Creedmoor’s designers crafted this cartridge to be 100% compatible with existing .308 Winchester and 7.62×51 rifles. So you can shoot the 7.6 Creedmoor safely in your existing .308 Win deer rifle or F-TR rig. As one ammo-maker’s marketing manager told us: “The 7.6 Creedmoor gives you everything you liked about the .308 Win, with a trendy name and the undeniable Creedmoor cachet. The 6.5 Creedmoor has become hugely popular. We expect the new 7.6 Creedmoor to do as well, or better!” We agree. Consider this — the 7.6 Creedmoor offers much better barrel life than the 6.5 Creedmoor, along with better bullet selection, particularly for hunters. With these advantages, how could the 7.6 Creedmoor not become a huge hit? The Creedmoor name alone should ensure success.
We discussed the new 7.6 Creedmoor with Dennis DeRille, one of the “founding fathers” of the 6.5 Creedmoor. Dennis said — “The Creedmoor name is synonymous with innovation and tactical success. This new 7.6 should live up to its name as it delivers .308 Win performance in a package for the 21st Century.”
Reassuring .308 Win Ballistics and Die Compatibility
Another great feature of the new 7.6 Creedmoor is that you can use existing .308 Win dies and reloading components. That excited one PRS shooter: “I had all this old .308 brass and .30-Cal bullets sitting around. When I heard about the 7.6 Creedmoor I said ‘Wow this is great, I can use this stuff in a Creedmoor now’. I know it will be accurate based on the name alone. That’s cool — tacticool!”
Because the new 7.6 Creedmoor shares case capacity and design details with the venerable .308 Win, it also shares the .308 Win’s impressive ballistics performance. “Whatever you can do with a .308 Win, you can do with the 7.6 Creedmoor… and then some!” says Hornady. Here is a chart showing projected velocities for the 7.6 Creedmoor with various barrel lengths and bullet weights.
NRA Approves 7.6 Creedmoor for F-TR Competition
Currently, NRA competition rules restrict F-TR rifles to the .308 Win (7.62×51) and .223 Rem (5.56×45) chamberings. But that’s going to change. Starting in June 2019, the NRA will allow 7.6 Creedmoor rifles in all F-TR matches. In addition, the 7.6 Creedmoor can be used in service rifles such as the popular M1A. It’s great to see this old battle rifle updated with Creedmoor accuracy and performance.
USA and Foreign Ammo Makers will Produce 7.6 Creedmoor Ammo
7.6 Creedmoor factory-loaded ammunition will be available from all major USA ammo-makers including Federal, Hornady, CCI, and Remington. As well, foreign ammo-makers Hirtenberger, Sellier & Bellot, and Prvi Partizan have pledged to produce 7.6 Creedmoor ammunition. That’s good news for shooters who want affordable Creedmoor ammo. One ammo-maker told us: “The whole industry is excited about the 7.6 Creedmoor. To be honest, .308 Win ammo sales have been declining for a number of years. Now we can repackage those same great components and market them to a new set of consumers reared on the 6.5 Creedmoor. This is a great deal for ammo-makers, who know how excitable Creedmoor fan-boys can be!”
Share the post "The NEW 7.6 Creedmoor — Best .30-Cal Cartridge Ever?"
First there was F-Class, and now there will be E-Class, the “E” standing for “Economy”. The NRA Competitive Shooting Division has just approved a new form of rifle competition starting in 2020: E-Class. Unlike F-Class, E-Class will have tight rifle and gear cost controls. This is a clear response to rising F-Class costs, which have spiraled out of control. The first major E-Class National event will be a preview match held this summer at Camp Atterbury in Indiana.
The NRA’s sanctioning of E-Class competition makes sense. Let’s face it, top-level F-Class competition, both F-TR and F-Open, has become just too expensive. A modern F-Open rifle capable of winning a championship can now cost $9000.00 or more, including rest, premium trigger, and optics. Under the NRA’s new E-Class Rules, rifles can cost no more than $2000.00 total, including optics and rest (E-Open) or bipod (E-TR). In addition, new E-Class rules will recognize a special division, called E-Factory, that is limited to factory rifles, such as the Savage F-Class rig and Ruger Precision Rifle. Factory Class will be restricted to .223 Remington to keep costs down.
E-Class Factory Division
Complete Rifle RPR: $1200
Barrel: Included
Stock: Included
Optics: $400
Trigger: Included
Bipod: $100
Rear Bag: $50 Total: $1750.00
Under the new E-Class rules, TOTAL Cost for an E-Open or E-TR Rifle is limited to $2000.00, including optics, front rest or bipod, and rear bag. There are specific gear limits. Scope maximum is $500.00. Front rest or bipod is limited to $200.00. In the chart above you see how an E-Open rifle could be built for under $1800 with a factory action (such as Howa or Savage) and a $400.00 optic. In the third column we’ve priced out an E-Factory rifle, based on a Ruger Precision Rifle, at $1750.00.
A top-of-the-line F-Open set-up like this can cost more than $8000.00 with custom stock, high-end optic, and coax front rest. All new E-Class rifles must cost less than $2000 including rests and scope.
Either way these E-Class rigs cost ONE-FIFTH of the Top-of-the-line $8750.00 F-Open Rig. That’s a huge savings, that will allow more shooters to enjoy competitive shooting. E-Class combines the fun challenge of the F-Class course of fire, with a vastly lower investment. With the rising costs of taxes, food, fuel, and everything else, it’s high time we get serious about the money we throw away on competition rifles. We know the wives will approve!
Keeping on Lid on Expenses
In the Wings — Controls on Ammo Costs as Well
Shooters know that the price of the rifle, optics, and rests is only part of the cost equation. The price of ammunition is also significant. Currently, in F-Open, competitors can easily pay $1.00 per round just for the expendables — bullets, powder, and primer. Add in the cost of premium .284 Win brass and the cost per shot goes up significantly. One competitor lamented “Shooting a match these days really empties your wallet. I cringe every time I pull the trigger, knowing what it costs.”
Therefore, the NRA is considering E-Class ammo restrictions. Starting in 2021, E-Factory class competitors would be required to shoot recycled bulk brass and blem bullets. Bulk Lake City 5.56 brass will be offered by ARMorAlly.com, and blem bullets will be offered by Midsouth Shooters Supply. Purists may complain about using surplus brass, but it only costs $93 for 500 cases! That’s a huge savings.
The Final Step — Claiming Rules for E-Class
As in every competitive endeavor, there may be temptation to bend or even break the rules. Predictably, some E-Class competitors may try to substitute more expensive components, such as high-cost triggers, or modified actions. To prevent this, the NRA plans to impose claiming rules for E-Class matches. This means that any rifle that captures first or second place in a major match can be claimed by another competitor for the fee of $2000.00. This procedure may seem radical but it is used in other sports to ensure parity among the competitors. If a shooter wins with a “cheater” $5000.00 rifle, he can be forced to sell it to a competitor for $2000.00.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Savage — 10% Rebate on Savage, Stevens, and Fox Firearms
Get a 10% Factory Rebate for ALL Savage, Stevens, and Fox firearms purchased from now through May 15, 2019. This Tax Season Rebate could easily save you $50, $100, or even $150 on a fine hunting, tactical, or rimfire rifle. During this Tax Season Savings Event, you’ll receive 10% back on your purchase with a maximum $150 Rebate. The Rebate amount is calculated from the retail purchase price excluding taxes and shipping/handling fees. Rebate submission deadline is 6/14/2019. REBATE FORM HERE.
2. NEW — Frankford Intelli-Dropper Scale/Dispenser, $199.99
Intelli-Dropper Priced Under $200.00: The new Frankford Arsenal Intelli-Dropper will be available very soon at leading vendors such as Midsouth, Grafs.com, and MidwayUSA for around $199.99. This new “Intelli-Dropper” features an advanced brain that can “talk” to a Mobile App on your smartphone via BlueTooth. This way you can store powder and load information on your smartphone and then control the scale/dispenser from the App. The App also has bullet, cartridge, and powder databases. The Intelli-dropper can also manually trickle. Our Deals Editor, F-Class John, just got one of these units and he really likes it. He says the “smart” functionality really is a game-changer. Being able to control the machine with load data stored on your smart phone is great for guys who reload many different cartridge types. Just make sure you know which powder is in the hopper ALL the time!
3. Grafs.com — 10% Off ALL Redding or Saeco Products
Do you need reloading dies, or tools to cast your own bullets? Now’s a great time to grab Redding or Saeco tools at Graf & Sons. ALL in-stock Redding and Saeco products are on sale, discounted 10%. There’s a huge sale selection — over 2000 Redding products and nearly 250 Saeco items. Along with Whidden and Forster, Redding makes high-quality dies and reloading tools. You won’t go wrong with Redding FL Dies, Bushing Dies, and Micrometer-top Seaters. Saeco is an industry leader for bullet casting molds and lubri-sizing hardware. NOTE: Don’t delay — this sale ends Wednesday April 3, 2019 at 11:59 PM Central Time.
4. Palmetto State Armory — PSA 20″ 6.5 Grendel Upper, plus stock, grip, 2-stage trigger, and parts kit: $399.99
The AR is a versatile platform. You can shoot multiple calibers with one lower, and a set of uppers — which can be swapped in seconds. Now you can add a versatile 6.5 Grendel upper for a killer price. We found this PSA 20″ rail-top upper in 6.5 Grendel complete with 20″ stainless 1:8″-twist barrel, 15″ M-Lok handguard, 9310 steel bolt, complete bolt carrier, and adjustable gas block. This kit also includes a stock, plus most of the parts needed to complete your lower (lower receiver NOT included). For $399.99 this is a heck of a deal. Take note — the 6.5 Grendel is a great little cartridge. It mag-feeds fine and you can get superb Lapua brass. The 6.5 Grendel is accurate, efficient, and excellent for BOTH precision target work AND deer hunting. For this price, with a modern 6.5 caliber cartridge, this is a great deal, and could be a significant upgrade for your AR15-platform rig.
5. March Optics — All Scopes on Sale
Every time we head to a match we see more and more March Optics on the line and there’s a good reason why. March offers some amazing scopes, offering incredible clarity, sharpness, and magnification ranges you won’t find on other scope series. If you’re looking to upgrade to a serious, competition-grade optic, here is your chance to grab a March scope at up to 30% off.
6. Midway USA — Magnetospeed V3 Chronograph, $339.99
All serious shooters need a modern, reliable chronograph to determine load velocity (and consistency). You need good velocity data for your ballistics AND to evaluate the consistency of your hand-loads. The Magnetospeed V3 Chronograph is one of the best on the market. Now you can get this fine Chrono for just $339.99, marked down from $380.00, a $40 savings. We like Magnetospeed chronos because you never need to go downrange to set up tripods and screens. Data can be downloaded to your mobile device.
7. Sportsman’s Guide — Bullseye Blowout Sale (60% OFF)
This week Sportsman’s Guide is offering a Spring Cleaning Bullseye Blowout Sale. There are 72 Bullseye Deals — Gun Cases, Ammo, Hunting Clothing, Archery Gear, Tree Stands, and more. Three gun storage sale items are shown above. NOTE — the biggest savings (up to 60%) are for Sportsman’s Guide Club members. If you’re not a member you can sign up for a 30-Day FREE Trial and still qualify for savings.
8. Amazon — MTM AC4C Ammo Crate with 4 Ammo Boxes, $22.99
Here’s a very cool product from MTM at a great price. The versatile MTM AC4C Ammo Carrier features four, lockable polymer ammo cans in a fitted, four-slot 23.5″ x 11.3″ x 7.5″ carry crate. This makes it easy to haul four full ammo cans. Actual purchasers have raved: “Moments after I received this storage box set I ordered another. Very well built and great design. Awesome and a steal at the price.” Right now this is on sale at Amazon for just $22.99 with free shipping on orders over $25. The system includes four lockable, O-Ring 11.3″ x 7.2″ x 5″ ammo cans (AC30T) for multi-caliber ammo storage. The crate even includes tie-down points for transport in a cart or ATV. NOTE: Last year this MTM AC4C system sold for $39.99. The current $22.99 price represents a 43% savings! Our Deals Editor recently ordered this himself and he liked it so much he immediately ordered another AC4C kit.
9. Amazon — Neiko Digital Calipers, $17.85
Even if you have a good set of calipers, you may want to get one of these Neiko 01407A Digital Calipers. The #1 best-selling digital caliper on Amazon.com, this Neiko tool features a large LCD Screen and measures up to 6.0 inches. With over 3800 customer reviews, this product has earned an overall rating of 4.4 out of 5 stars. It’s hard to go wrong for $17.85, even if you just use these as a spare set for measuring group sizes and case trim lengths.
Share the post "Bargain-Finder 184: AccurateShooter’s Deals of the Week"
