Fast Firing Using Benchrest Stock With Adjustable Rudder

In the benchrest game, both 100/200 yard disciplines and Long Range, it’s important that your rifle track smoothly and repeatably every time. You want the rifle to come straight back without twisting, rocking, or hopping on the bags. When you’re trying to drill your entire 5-Shot or 10-Shot string quickly, it’s also important that the gun returns to the same position after each shot. When the scope crosshairs return to virtually the exact point of aim, you can make successive shots with minimal aim adjustments.

For top “runners” who try to get five shots down-range in under 20 seconds, not having to make significant aiming corrections with your front rest controls can really speed up the process. Shooting quickly permits the competitor to “stay in the condition”, sending all his shots to the target before the wind direction or wind velocity changes.

TEN Shots in 20 Seconds at 1000-Yard Match

To see how rapid shooting works, watch this video of Tom Mosul, one of the USA’s best 1000-yard shooters. In a 10-shot Heavy Gun relay, Tom shoots his 17-lb Light Gun chambered for a 6mmBR Improved cartridge. He pulls the trigger for the first time at 00:20 and he fires his tenth (and last) shot at 00:40. Tom makes TEN SHOTS in 20 seconds, an average of just 2.0 seconds per shot!

TEN Shots in 31 Seconds at 1000-Yard Match

This second video, filmed from the side, shows Tom Mosel shooting a different 17-pounder. Again, note how smoothly the stock slides back and forth. Here Tom completes Ten Shots in 31 seconds, with the first shot at 00:13, and the tenth (last) at 00.44.

Adjustable Stock Rudder Through-the-Lens Video

Gunsmith Alex Wheeler sells stocks with an adjustable metal “rudder” or “keel” on the underside of the rear section of the stock. This rudder is the only part of the stock that contacts the rear bag. This aluminum rudder can adjust slightly left to right as well as adjust up/down for angle. Some guys want the keel nearly flat while others prefer the keel to be slightly lower in the rear.

This video shows how the cross-hairs stay on target once the stock rudder is adjusted properly. Alex adjusted this particular rudder by shimming the height* and moving the back of the rudder to the right.

The rudder’s horizontal adjustability allows benchrest shooters to correct for stock flaws that might adversely affect tracking. Essentially, by adjusting the rudder, you can achieve perfect alignment. Alex Wheeler explains: “If you pull your rifle back in the bags and the cross hair moves, your stock is not straight. The easiest fix is to use an adjustable rudder. They come standard on all my stocks.”

Wheeler explains: “The white box in the center of the 1000-yard target is four inches square. With a properly-adjusted rudder it’s easy to obtain less than one inch of cross-hair movement at 1000 yards.” You can see that, once Alex made the rudder adjustment, there’s hardly any detectable movement. Alex adds, “the more you play with it, the better you get it.”

*Initially Alex says he is going to shim the front. Later in the video Alex says he shimmed the rear. It can be a trial/error process. Credit Boyd Allen for finding these videos.