10 « January « 2020 « Daily Bulletin

teslong borescope digital camera barrel monitor

As an Amazon Associate, this site earns a commission from Amazon sales.

January 10th, 2020

New Berger 7mm 190 Grain Long Range Hybrid Target Bullet

Just in time for the Berger SW Nationals, Berger has released a class-leading new 7mm bullet — the 190 Grain Long Range Hybrid Target (LRHT). The new 190-grainer boasts a “jump-tolerant” hybrid ogive profile along with formed meplat (bullet tip) for more consistent Ballistic Coefficient (BC). In fact, with its new MRT (Meplat Reduction Technology) nose, Doppler Radar testing confirms less than 1% BC variation from bullet to bullet. While a high BC is of course desirable for competitive shooting, shot-to-shot BC consistency is most critical when engaging targets to 600 yards and beyond. The new 7mm 190gr LRHT’s BC numbers are very impressive: 0.751 G1 and 0.384 G7.

Designed for F-Open competition, the 7mm 190gr LRHTs are optimized for cartridges such as .284 Winchester, 7mm WSM, 7mm SAUM, and 7mm Remington Magnum among others.

No you don’t need a new barrel to shoot the 190s. If you are running Berger 184s in a 1:9″ or faster twist you should be fine. Berger states: “The 190gr LRHT is complementary to the industry-leading Berger 184gr F-Open Target bullet with an identical stability factor and improved ballistics when launched from 1:9″-twist barrels.”

Meplat Reduction Technology for More Consistent BCs
Utilizing advanced and proprietary manufacturing processes, Berger’s innovative Meplat Reduction Technology (MRT) applies controlled pressure along the nose of each LRHT bullet. Berger states this delivers ” a homogeneous and repeatable profile for the industry’s most consistent Ballistic Coefficients”.

“With improved MRT consistency contributing to its superior ballistic coefficient and form factor, the 190 is one of our highest performance projectiles to date. They provide minimal dispersion and more hits on target for F-Open competitors, long range shooters and larger capacity 7mm enthusiasts.” said Garett Stoddard, Berger’s Lead Production Engineer.

The new Berger 7mm 190 Grain Long Range Hybrid Target Bullets are shipping now to Berger authorized retailers.

Permalink Bullets, Brass, Ammo, Competition, New Product, News 1 Comment »

January 10th, 2020

Getting the Most Out of Your Progressive Press — PowerUser Tips

Blue, Red, Green — There are many Progressive Press options on the market…

When you need ammo fast — lots of ammo, it’s hard to beat a progressive reloading press for output. We use progressive presses to load handgun ammo and .223 Rem cartridges for varmint safaris. With good dies, and proper press set-up, today’s progressive presses can produce surprisingly uniform and accurate ammo. No, you won’t see Benchrest Hall-of-Famers loading PPC cartridges on progressives. However, if you need 1000 rounds for your next prairie dog adventure, you should consider getting a progressive. Below you can see a Hornady Lock-N-Load AP configured to load .308 Winchester in bulk.

Hornady .308 winchester lock-n-load progressive press

CLICK HERE to Read Full Article

UltimateReloader.com has published helpful Tips to Optimize Progressive Rifle Loading. No matter whether you have a Red (Hornady), Green (RCBS), or Blue (Dillon) progressive, this article can help you load more efficiently and produce better results. Here are some highlights:

Proper Brass Prep
Just like a good paint job requires good prep work, great rifle ammo requires good brass prep. In order to make sure your rifle loading goes smoothly, make sure to perform the following brass prep steps:

Clean the brass (tumble, ultrasonic, etc.)
Inspect brass for cracks, deep dents, etc.
For military brass: de-prime, ream/swage primer pockets, size with small-base sizer die (small base usually optional).
Measure brass length — if too long, size and then trim.
Final inspection before loading.
Cleaning primer pockets may be something you’ll consider (I don’t clean primer pockets except for rare cases or match ammo).

Smooth and Steady Pace
Since you’re loading rifle ammunition on a progressive, you’re already saving a load of time, so there’s no need to rush things! Attention to detail is super-important for safety and for good results. Always keep an eye on powder level (goes down FAST) and what’s happening at each station.

The Right Press and Press Setup
Look for a heavy-duty, well-built press that will stand up to rifle loading. You’ll also want to make sure your powder measure will have the proper capacity (~25 grains for .223, ~50 grains for 308). If you are bulk reloading, ensure you have enough stations for sizing, charging, powder check, bullet feed, bullet seating, and (optional) bullet crimp. Compare the powder measuring systems, and give careful consideration to the priming process. You want case priming to be 100% reliable. This video reviews the differences between the Dillon XL-650 and the new XL-750 Progressive presses.

More Ultimate Reloader Resources for Users of Progressive Presses:

Permalink Bullets, Brass, Ammo, Gear Review, Reloading No Comments »

January 10th, 2020

Firearms Fashion — T-Shirts for Gun Guys and Gals

Some of our Shooters’ Forum members have asked for t-shirts with AccurateShooter.com logos. Sorry folks, we don’t offer those for sale, but we have searched the internet and found ten great t-shirts for gun guys and gun gals. Most of these shirts are available is multiple sizes, and many offer color choices. You’ll find over 100 more gun-themed shirts at the Etsy.com online store.

Click on each shirt image for more specs and purchase options:

Here’s one for 1911 fans…