RCBS Lock-Out Die Helps Prevent Faulty Charges on Progressives
If you load pistol or rifle ammo with a progressive press, we strongly recommend you get a Lock-Out Die from RCBS. This unique reloading die will prevent your progressive press from advancing if the dispensed powder charge is more or less than about 0.3 grains too high or too low. The Lock-Out Die really works. Your Editor uses it on his RCBS 2000 progressive press. I can affirm that a Lock-Out Die has “saved my bacon” a half-dozen times over the years when there was an over-charge (which could cause a Kaboom) or a low charge (which could cause a squib load).
The Lock-Out Die works by using a central die detection rod that sets its vertical position based on the height of the powder column in the case. Through an ingenious design, if the powder column height is too low or too high, the rod locks in place as you start to pull the press handle. This halts the press before the ram can lift and the cartridge plate can advance. Unlike a beeping alarm system (which can be ignored or defeated), the Lock-Out Die physically stops the movement of the press ram and prevents a bullet being seated in the “problem” case.
It takes a bit of tweaking to get the Lock-Out Die detection rod setting just right, but once it is correctly positioned, the Lock-Out Die works smoothly in the background. The Lock-Out Die won’t interfere with the loading process unless it detects a high or low charge — and then it positively stops the progressive loading cycle.
While crafted for use in RCBS progressive presses, the RCBS Lock-Out Die can also be used on a Dillon XL Progressive (see video below) or Hornady Lock-N-Load progressive — though it does take up one station which could otherwise be used for a final crimp die (after the seating die). The RCBS 2000 has one more station than a Dillon 550/650, so it’s an ideal platform for using the Lock-Out Die.
Learn More at UltimateReloader.com
On the UltimateReloader.com website, run by our friend Gavin, you’ll find an excellent two-part series on the function and set-up of the RCBS Lock-Out Die. Part One explains how the Lock-Out Die functions, using cut-away illustrations. Part Two shows how to install and adjust the Lock-Out Die on various progressive presses. The video below shows setup of the RCBS Lock-Out Die on the Dillon XL-650 progressive press.
Similar Posts:
- RCBS Lock-Out Die Enhances Safety of Progressive Presses
- RCBS Lock-Out Die for Progressive Presses — Be Smart, Be Safe
- Progressive Reloading Presses — Seven Presses Reviewed
- Saturday at the Movies: Seven Progressive Presses in Review
- How to Pull Down Ammo Using Cam-Lock Tool with Collet
Share the post "RCBS Lock-Out Die Helps Prevent Faulty Charges on Progressives"
Tags: Dillon, Hornady, Lock N Load, Lock-Out die, RCBS, UltimateReloader.com, XL 550, XL 650
Congratulations RCBS! Dillon has had this feature for fifteen years or more in the form of a system that fits in the powder measure station. Next year,they’ll probably come up with one that beeps when the auto primer feed gets down to 2-3 primers.
Rich
This will require using the PTX expander with hornady presses. Or alternatively, one would have to break up the progressive stage as there are not enough stations.