At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. Palmetto SA — Stoeger STR-9 Pistols, $199.99 w/$50 Rebate
⏺ After rebate, incredible deal on very good 9mm pistols
German gun-maker Stoeger makes excellent pistols. Accuracy and reliability is very good and we like the trigger better than the Glock. Right now 9mm Stoeger STR-9 pistols are on sale at Palmetto State Armory for just $249.99. That’s a great deal — but it gets even better! Through April 30, 2024, Stoeger has a $50 Mail-in Rebate. That lowers your net cost to just $199.99 — a third of the price of a Glock. For this same $199.99 price choose one of three models: Standard STR-9 (4.17″ bbl, 15+1), Compact STR-9c (3.8″ bbl, 13+1), and Sub-Compact STR-9sc (3.54″ bbl, 10+1).
2. Creedmoor Sports — Anniversary 45 Days of Deals
⏺ Attractive prices on wide variety of products
Creedmoor Sports is marking its 45th Anniversary this month with a major sale on a wide variety of products including scopes, reloading presses, dies, shooting accessories, competition sights, plus bullets and brass. CLICK HERE to see all the current sale items. If you are looking for brass, many types of quality Peterson and Starline brass are on sale now.
3. Grafs.com — Frankford Arsenal F-1 Press, $122.99
⏺ Versatile press, good primer exit, plus built-in light
Here’s a handy, single-stage press with some cool features. The new Frankford Arsenal F-1 press has an open front for easy case placement, plus a built-in LED lamp at the top (great for inspecting cases). And after decapping, spent primers go straight down a tube into a handy, clear, twist-off catch cylinder (as on a Forster Co-Ax). We think this would be an excellent secondary press used for decapping or bullet seating. This intro price — just $122.99 at Graf & Sons — is a great deal. NOTE: This press does NOT have priming capability — you must prime cases with a separate tool. Also, the power cord for the LED light is NOT included. For more details see Frankford Arsenal F-1 Press Review.
4. Midsouth — Rifle Basix Triggers and Trigger Components Sale
⏺ Trigger assemblies for Rem, Winchester, Ruger, CZ, Marlin and more
Rifle Basix makes a wide variety of trigger components for custom rigs as well as factory rifles. There are complete trigger sets for Rem 700 and Howa/Weatherby types. In addition there are upgraded parts for factory triggers including: Savage, Ruger, CZ, Marlin, and Winchester and more. Right now at Midsouth you can get major savings on the full range of Rifle Basix triggers. Get complete Rem 7/700 trigger sets starting at $124.99, with Ruger and Marling upgrades for just $89.99.
5. EuroOptic — SIG Sauer Optics Sale, Save up to 42%
⏺ Huge savings on scopes, binoculars, laser rangefinders, and red dots
Right now EuroOptic.com is running a big sale on SIG Sauer optics products. You’ll find savings up to 42% on quality scopes, binocs, and rangefinders. Along with the items shown above there is a great combo deal with a Sierra 3BDX 3.5-10x42mm riflescope w/KILO2800 Rangefinder for just $449.99, a $200 savings. This is a great package for game hunters.
⏺ Excellent, rugged rifle case at a very good price
When flying or driving it’s vital to protect your rifles. A good hard case option (at a great price) is the APACHE 9800 Weatherproof Protective Rifle Case. On sale for $169.99, this 53″-long case is $150.00 less than an equivalent-size Pelican case. Constructed from durable polypropylene, this quality hard case can protect long guns from from impact, moisture, and dust. The built-in purge valve equalizes pressure so you can open the case after changing elevations. NOTE: Case interior dimensions are 50⅜” by 13⅝”.
7. Bullet Central — ThorroClean Bore Cleaning System, $21.49
⏺ ThorroClean is ultra-effective, and favored by many top shooters
You can clean rifle barrels faster and more efficiently with the modern twin-bottle ThorroClean System from Bullet Central. We’ve been told by championship-class shooters that this stuff works exceptionally well — way better than most other conventional bore cleaners. The ThorroClean System has two elements. First use the bore cleaner fluid. Then follow with the bore flush liquid. This unique two-part system is extremely effective at removing both carbon residue and copper.
8. Amazon — Caldwell AR-500 Steel Targets, starting at $16.99
⏺ Great deals on durable AR500 steel targets — watch video below right
Caldwell’s bright, easy-to-see steel targets come in multiple shapes and sizes for competition, training, and recreational use. Made of AR-500 grade hardened steel, these bright yellow targets can withstand thousands of rounds. Rated up to a 3000 fps impact velocity and a 3500 ft-lb impact energy, these targets come in seven styles and sizes with three hanging solutions. These bright yellow Caldwell AR500 Steel Targets (#ad) are on sale now on Amazon, starting at just $16.99 for the 5″ Gong Target.
When traveling by air with a handgun, the pistol must be in a case with a TSA-approved lock. The Snapsafe Treklite XL Lock Box complies with TSA rules. It will hold two compact pistols or one larger pistol with magazing (which must be UNLOADED). Made with a strong polycarbonate case, This lightweight (2.2 lb) lock box is one-third the weight of a steel box. Right now the Treklite XL FDE Lock Box is just $29.99 at Midsouth, 25% OFF the regular price.
10. Amazon — NEIKO 6″ Digital Calipers, $24.99
⏺ Good, reliable digital calipers at attractive price
Every handloader needs to measure shoulder bump, cartridge length, and other dimensions. A good set of calipers is essential. If you need calipers, check out the NEIKO Electronic Digital Calipers (#ad). The tool’s body/frame is constructed of finely polished stainless steel with a knurled thumb roller and locking screw that ensures smooth sliding and accurate positioning. If you’re getting started in reloading or are looking for a back-up set of calipers, this is a good option.
As an Amazon affiliate, this site can earn revenues through sales commissions.
Share the post "Bargain Finder 447: AccurateShooter’s Deals of the Week"
The NRA World Shooting Championship was held April 3-6, 2024 at Camp Atterbury, Edinburgh, Indiana. Presented by Walther, this challenging event involved rifle, pistol, and shotgun shooting with a dozen disciplines — from short-range action pistol to long-range rifle. Topping the field among lady shooters was the talented Lanny Barnes, a 3-Time Olympic biathlete and professional 3-Gun competitor. We congratulate Lanny for her great 2024 performance at the NRA Championship, which earned Lanny the title of NRA World Shooting Lady Champion!
Lanny provided this report on the NRA World Shooting Championship event:
“This match definitely is challenging. I was fortunate to shoot with the greatest shooters on the planet and we battled challenging weather, tough stages, foreign to us firearms while shooting 12 different disciplines that tested your skills in picking up a firearm and making the most of it. We shot rifles, pistols, and shotguns and anything from short range to long range to speed to accuracy to shooting on the move to moving targets and everything in-between.
If you want to see how well rounded a shooter you are, come out and give this match a shot. Congrats to all who competed and survived this tough event. I want to especially give a shout out to my squad. I learned so much from your guys. My shooting sisters Dianna Muller, Becky Yackley, and Gabby Franco who despite working their tails off with life’s challenges, they are out there pushing themselves hard. Awesome to shoot with Tristin Burris who is just a beast and is really improving her shooting and then there is the guys, Jerry Miculek and Bruce Piatt among many legends who are not only great guys and incredibly humble, they are a rare breed of champions that has set themselves apart and will go down in the history books as the greatest shooters in the world.
I also don’t think I’ve laughed as much in the last year as I did the last few days with my squad. Thank you guys. Thank you to the NRA for bringing this match back and focusing on shooting sports and to all those you volunteered and put those into this match. Huge shout out to Walther Arms for putting so much effort and great guns into this match.”
Above Lanny (aka “Lanny Oakley”) is shooting a stage at the NRA World Shooting Championships. Lanny notes: “It was a PRS Stage using a Ruger Precision .308 shooting 8 targets at 411 yards. You were allowed 3 sighted shots but couldn’t touch the scope. I ended up using all 10 shots but was happy to get the hits. Thanks to Ruger for sponsoring the match. I actually won one of their precision rifles from this match[.]”
Share the post "Lanny Barnes Wins Lady Division at NRA World Championships"
Here’s a “must-read” article for .22 LR rimfire shooters. The October 2018 issue of Shooting Sports USA (SSUSA) includes a great article with data on thirty-one (31) different types of popular .22 LR rimfire ammunition. The line-up includes low-speed, standard, and Hi-Velocity types, plus choices for plinking, varminting, and target applications. Brands tested include: Aguila, American Eagle, CCI, Federal, Fiocchi, Lapua, Remington, and Winchester. The slowest ammo, CCI Quiet-22 Lead RN, clocked 727 FPS. The fastest ammo, CCI Short-Range Green Lead-Free HP, ran 1735 FPS, 2.4 times the speed of the Quiet-22.
For each ammo type, SSUSA lists the bullet weight, velocity (FPS), and average of two, 5-shot groups at fifty yards. The most accurate ammo was Lapua Center-X LRN, with a 0.37″ average 50-yard group size. Second best was Lapua X-ACT LRN at 0.42″. Ammo was tested from a bench with a Cooper Model 57-M rifle fitted with 3-9x33mm Leupold VX-2 scope. The ammo offerings were grouped into three categories: (1) Varmints/Small Game; (2) Target; and (3) Plinking. (See ammo tables below.)
Click for larger page-view.
Different types of .22 LR (Long Rifle) rimfire ammo have different applications. Subsonic ammo, typically, is best for 25m to 50m target work with precision rimfire rigs. Hi-Velocity .22 LR ammo provides a flatter trajectory for longer ranges. SSUSA explains: “The array of .22 LR loads… turns a person’s head every which way. Subsonic target loads are the key to decisive accuracy on targets, while hyper-velocity cartridges provide striking bullet expansion on small varmints. In between, standard and high-velocity .22 LRs are loaded with a variety of bullet weights and styles for everything from small-game hunting to plinking[.]” READ Full SSUSA .22 LR Rimfire Ammo Story.
Rimfire Ammo Article tip from EdLongrange.
Share the post ".22 LR Rimfire Ammunition Comparison Test — 31 Ammo Types"
Spring varmint season is well underway, and we just showcased six groundhog hunting videos. So here’s a very accurate Half-Mile ‘Hog rifle, that can drill a groundhog at long range. While just about any cartridge from a 22 Magnum on up will do the job on a groundhog at close range, when you want to “reach out and touch” your prey at very long distance, it takes a case capable of tossing a heavier, wind-bucking projectile at ultra-high speeds. This week we feature a 6mm Remington Ackley Improved (6mm AI) belonging to our friend John Seibel, who ran the Varmints for Fun website for many years.
John’s handsome BAT-actioned rifle sends the 87gr V-Max at a blistering 3675 fps. With its 1/4-MOA accuracy and flat-shooting ballistics, this gun is a varmint’s worst nightmare, a rig that regularly nails groundhogs at a half-mile (880 yards) and beyond.
Quarter-MOA Accuracy For Long-Distance Varminting
GunDay Report by John Seibel
John reports: “So far this gun has been an awesome long-distance varmint rig, with enough velocity to smack those critters hard at 800 yards and beyond. I have some more testing to do, but it seems that the 87gr V-Max (molyed) pushed by 52 grains of N160 or 51.5 grains of RL-19 shoots very well indeed. Velocity runs around 3675 fps. I shot consistent 1″ groups at 500 yards with both of these loads. Warning: These are max loads that work in my rifle, so start at least 10% lower and work up.
My fire-forming procedure is just jam and shoot. I start with a powder (such as H414) that works for the parent case, fire a few cases as I work up the load to where I get a well-formed case, then shoot them at varmints. Then I work my load up with the newly-formed cases over a chrono. If a load looks good at 100 yards, I will go straight for 200 yards. I’ve seen that some loads which grouped well at 100 won’t shoot well at 200. If it is consistent at 200, then I’ll shoot it a steel plate at 500 yards. Then the truth will be told.
Man I love that BAT action! I have tried some Berger 88gr Lo-Drag bullets as well. They have the same BC as the V-Maxs but offer excellent accuracy. The action is BAT’s Model B round action configured Right Bolt, Left Port, with a fluted .308-faced bolt. The port is 3.0 inches wide — perfect for the 6mm Rem Improved cartridge’s OAL. I use a NightForce 8-32x56mm NXS scope mounted to BAT’s 20-MOA aluminum Weaver-style base. I use Burris Signature Zee rings because they are self-aligning and easy on scope tubes, plus you have the option of adding more MOA if needed.
Krieger with Harrell Brake
The barrel is a stainless Krieger 1:12″ twist Heavy Varmint contour, finished at 26″. I installed a Harrell’s muzzle brake because I hate recoil and I like to be able to spot my hits when target shooting and hunting–especially hunting.
When hunting I am usually by myself so when I eyeball a varmint I want to see my shot flatten him … and I hardly ever miss (heh-heh). Make sure you have your earplugs in though — that muzzle brake is loud!
Easy-Steering Thumbhole Varminter
The stock is Richard’s Custom Rifles Model 005 Thumbhole Varminter. This is a big stock that rides the sand bags very well. Took me a while to get used to this stock as I had never shot a thumbhole before. It is very comfortable and easy to control when you are shooting a moving target. In fact, my first kill with this rifle was a coyote at a little over 200 yards, she was moving along at a slow clip and I had to give her the ole’ Texas heart shot before she disappeared over a hill! (It’s pretty rare for me to shoot moving varmints though — at long-range, I want my cross-hairs steady on the target.)
Regarding the stock selection, I like Richard Franklin’s stocks [now out of production] because they are well-suited to my kind of shooting. I prefer a stock that is flat most of the way back towards the action because when I’m shooting out of my truck window it has to balance around mid-point. Also his stocks seem to track very well on the bench. I guess the stocks I like the most are his Model 001 and Model 008 F-Class. [Editor’s note: John often shoots from the driver’s seat of his truck because he is partially paralyzed. He also has a hoist in his truck bed for his wheelchair. Even with his mobility challenges, John tags more varmints in a season than most of us ever will.]
Choice of Caliber — A 6mm with More Punch for Long Distance
I picked the 6mm Rem Improved mainly because it has that long neck for holding long bullets and it doesn’t burn the throats out as fast as a .243 AI would. I don’t use Remington brass; it splits when fire-forming and seems to work-harden fast. Another reason I picked the 6mm Improved was what I saw in the field–it seemed to be a perfect long-range groundhog getter. I saw my stocker, Richard Franklin, flat smack groundhogs out to 900+ yards with regularity. The OAL of a 6mm Improved does make it hard to remove a loaded round from a standard Remington 700 action. That’s why I went with the BAT Model B, with its longer 3.0″ port. For a standard action, a .243 AI might function better.
As for the 6 Dasher, from what I have read, I think it is a fine round. I’m a hunter though and a lot of case-forming isn’t worth it to me. Forming the Ackleyized cases is bad enough. The 6-250 is a real screamer and very accurate but it doesn’t have the capacity to drive the heavier bullets as well as the 6mm Improved. I have tried a .243 WSSM, also with a Richard’s stock (#008) and a BAT action. It may not shoot as well as the 6mm Rem Improved, but I like those short fat cases.
John’s Views on the Great Moly Debate
Editor: John started with moly-coated bullets for this 6mm Rem AI rifle, but he has moved away from that. He does have considerable experience with coated bullets, and now, at least with custom, hand-lapped barrels, he normally uses uncoated bullets. He now favors coated bullets only for the small .17 caliber.
Moly or no moly… hmm? I have used moly and Danzac for several years, mainly Danzac. In my experience, both moly and Danzac can work well for somebody who shoots a lot of rounds before cleaning. A barrel has to be broken-in correctly whether you use moly or not. I have done break-in with naked bullets, using the conventional method of shooting and cleaning till the copper stops sticking. I have also gone through the break-in process using molyed bullets from the start. It seems to me the barrels broke-in more readily with moly bullets than with naked bullets. I think if there are any rough or sharp places in the barrel the slick molyed bullet doesn’t grab it as badly and the moly will “iron” the flaw out without leaving copper behind.
The main mistake I think most people make with moly is improper cleaning. By that I mean they don’t get the bore clean from the beginning. Some people will scoff at me for this but I use JB bore paste for most all my cleaning, hardly ever use a brush. Just JB and Montana Extreme or Butch’s Bore Shine. It works for me! Now shooting molyed bullets works fine to say 500 yards, but any further and you really need a lot of tension on the bullet. If not you will get bad flyers.
Personally, I use coated bullets only with .17 cal rounds now. I did use them initially in my 6mm Rem AI but I am starting to move away from that. With proper break-in, the fine custom barrels we have now will not copper if you clean correctly and don’t push those bullets too fast! And remember that powder-fouling build-up is an accuracy-killer too. That is another reason I use a lot of JB paste.
John lives and works on a farm in Virginia. Getting rid of intrusive varmints is part of the job of running the farm. Here is one of John’s bolt-action pistols, which is very handy when shooting from a vehicle.
The Guru of Varmints For Fun
For many years John Seibel ran the popular Varmints For Fun website (now offline). This site offered excellent advice for hunters and reloaders. John covered a wide variety of varmint chamberings, from big 6mm wildcats, to the popular 6BR, 22BR and .22-250 caliber varmint rounds, and even the micro-caliber wildcats such as the 20 Vartarg and 20 PPC. Shown below is one of his favorite rifles, a 20 PPC with a special short version of Richard Franklin’s Model 008 stock.
John tells us: “I guess one reason I started my web site is that I was getting a lot of inquiries about hunting groundhogs, custom rifles and reloading. Plus I thought it was a fine way to get young people interested in the shooting sports. Lord knows hunting and firearms aren’t taught any more. I get a lot of young hunters and shooters asking what’s the best caliber for hunting varmints, and they’ll ask for reloading help too. It’s a shame, but many of them have no one to teach them. I do my best to help.
Showing others that a person can still shoot, even with a disability, is another reason I started my web site. I am a C 6-7 Quadraplegic, which means I have no grip in my hands. Imagine shooting those 1.5 oz Jewels that way! I had a therapist tell me I wouldn’t be able to shoot or reload once I got out of the hospital…shows you how much he knows! First time I got home from the hospital it was deer season and I had Pops park me at the edge of some woods. Well I had a 7-point buck on the ground in thirty minutes! Being raised on a farm didn’t hurt none either–it helped me figger ways to jury-rig stuff. Of course I couldn’t have done much if it wasn’t for my family and my lovely wife Cathy[.]”
John’s Favorite 20 PPC Varmint Rifle
Cartridge History Lesson — the Original .244 Remington
Here’s bit of cartridge history. The 6mm Remington, parent of John’s 6mm AI, actually started its life with a different name, the “.244 Remington”. What we now know as the “6mm Remington” was originally called the .244 Remington. The cartridge was renamed because it was not a commercial success initially, being eclipsed by the .243 Winchester. The .244 Remington and the 6mm Remington are identical — only the name was changed.
Share the post "Sunday GunDay: 6mm Rem AI Runs 3675 FPS in LR Varmint Rifle"
If your local shooting club wants to attract new members, and provide a new form of competition, consider starting a series of groundhog (varmint) matches. These can employ paper targets, metal silhouette-style targets, or both. Groundhog matches are fun events with straight-forward rules and simple scoring. You don’t need to bring windflags or load at the range, so a Groundhog match is more “laid back” than a registered Benchrest match. Normally there will be three or four rifle classes, so you can compete with a “box-stock” factory gun, or a fancy custom, as you prefer. Many clubs limit the caliber or cartridge size allowed in varmint matches, but that’s just to protect reactive targets and keep ammo costs down. In this article, Gene F. (aka “TenRing” in our Forum), provides a basic intro to Groundhog matches, East-Coast style.
Groundhog Matches Are Growing in Popularity
Though Groundhog matches are very popular in many parts of the country, particularly on the east coast, I’ve found that many otherwise knowledgeable “gun guys” don’t know much about this form of competition. A while back, I ordered custom bullets from a small Midwest bullet-maker. He asked what type of competition the bullets would be used for, and I told him “groundhog shoots”. He had not heard of these. It occurs to me that perhaps many others are unfamiliar with this discipline.
Groundhog matches have grown rapidly in popularity. There are numerous clubs hosting them in Pennsylvania, Maryland, and Delaware, as well as other venues. They are usually open to the public. Most Eastern clubs have five to twenty cement benches, and overhead roofs. At this time, there is no central source for match schedules. If you’re interested in going to a groundhog match, post a query in the AccurateShooter Forum Competition Section, and you should get some info on nearby opportunities.
How Matches Are Run — Course of Fire and Scoring
Unlike NRA High Power Matches, there is no nationwide set of standard rules for Groundhog matches. Each club has their own rules, but the basics are pretty similar from club to club. Paper groundhog targets are set at multiple distances. There are normally three yardages in the match. Some clubs place targets at 100, 200, and 300 yards. Other clubs set them at 200, 300, or 400 yards. At my club in Shippensburg, PA, our targets are placed at 200, 300 and 500 meters.
The goal is to score the highest total. The paper targets have concentric scoring rings. The smallest ring is normally worth ten points while the large ring is worth five points. The course of fire varies among the various clubs. Most clubs allow unlimited sighters and five shots on the record target in a given time period. Only those five shots on the scoring rings are counted, so that with three yardages, a perfect score would be 150 points. Tie breakers may be determined by total number of dead center or “X” strikes; or, by smallest group at the farthest distance.
Types of Rifles Used at Groundhog Matches
The same benchrest rigs found at IBS and NBRSA matches can be utilized (though these will typically be put in a ‘custom’ class). Though equipment classes vary from club to club, it is common to separate the hardware into four or five classes. Typical firearm classes can include: factory rifle; deer hunter; light varmint custom (usually a limit of 17 lbs.with scope); and heavy varmint custom (weight unlimited). Some clubs allow barrel tuners, others do not. Scope selection is usually unlimited; however, some restrict hunter class rifle scopes to 20 power. Factory rifles usually cannot be altered in any way.
Good, Simple Fun Shooting — Why Groundhog Shoots Are Popular
Forum member Danny Reever explains the appeal of groundhog matches: “We don’t have a governing organization, or have to pay $50 a year membership just to compete in matches. Sure the rules vary from club to club, but you adapt. If you don’t like one club’s rules, you just don’t shoot there. It’s no big deal.
There are no National records, or Hall of Fame points — just individual range records. If you want to shoot in BIG matches (with big prizes), there is the Hickory Ground Hog Shoot among others. If competition isn’t your bag, many clubs offer mid-week fun matches that you can shoot just for fun. You shoot the same targets but with a more relaxed atmosphere with no time limits.
The best part is you don’t have to shoot perfect at every yardage. You always have a chance because in this sport it really isn’t over until the last shot is fired. Typically ALL the entry money goes to the host club, with much of the cash returned back to the shooters via prizes. Junior shooters often shoot for free, or at a reduced rate. The low entry cost also encourages young guys to get involved who don’t have $4000 custom rifles or the money to buy them.
There isn’t a sea of wind flags to shoot over or to put up and take down. If the range has a couple of flags so much the better, but after all it is a varmint match. No pits to spot shots and slow things down either. If you can’t see your hits through your rifle scope or spotting scope well you are in the same boat as everybody else. That’s what makes it interesting/ sometimes frustrating!
Share the post "Club Groundhog Matches are Fun — Tips on Competition"
Spring Groundhog Hunting — Fun and Challenging
Springtime is the right time for groundhog hunting in the Northeast USA. Groundhog hunting is both fun and challenging. In today’s Saturday Showcase, we feature three videos showing successful groundhog hunts. Then there is a video about checking your equipment and verifying your varmint rifle zero.
We’ve even included a good video offering cooking tips for groundhog/woodchuck.* Yes groundhog meat can be quite savory — used in stews, sandwiches, or tacos. Last but not least we’ve included a section on groundhog shooting matches. These are fun matches with paper and/or steel groundhog targets.
Groundhog Hunt Report — Successful Stalk and Shoot
Here’s a great Realtree.com video showing successful groundhog hunts. This covers the process of spotting and tracking groundhogs on farmlands. Woodchucks are sensitive creatures that get easily spooked. This video shows that groundhog hunters need patience and skill, plus an accurate rifle.
Groundhog Hunting on the Family Farm with .17 HMR
In this video, the host employs his CZ 457 rifle chambered in .17 HMR to hunt groundhogs on his farm. The video provides a hunter’s POV with excellent Scope-Cam footage. This young shooter has 280 videos on his popular Blocketh Outdoors Channel including videos showing how to stalk groundhogs successfully. These critters go to ground quickly if they see or hear the hunter. NOTE: The lead photo for this Saturday Showcase comes from another Blocketh Outdoors groundhog video.
Groundhog Killshot Compilation Video
Here’s a classic “killshot” video showing multiple hits on groundhogs. If you want to see how a well-aimed varmint bullet can flip, spin, and elevate a groundhog, this video will keep you entertained. While we like explosive hits on prairie dogs, it may be better to use a solid, non-expanding bullet if you plan to harvest the groundhog (aka woodchuck) meat.
Groundhog Hunting — Importance of Confirming Your Zero
This AR15 Hunter channel video covers getting ready for spring groundhog season. This is a helpful video that shows how to confirm your zero on your varmint rifle. If you have an AR-platform Modern Sporting Rifle, this video is worth watching.
If you don’t have groundhogs in your part of the USA, don’t fret. You can still have fun hunting smaller varmints such as ground squirrels and Prairie Dogs. Here’s a good video covering P-dog hunts with a suppressed .223 Rem AR. The video covers recommended equipment including bipod, tripod, and optics.
Groundhog Matches — Fun Shooting at Paper and Steel ‘Hogs
Along with actual groundhog hunting, many shooters like to shoot paper and/or steel groundhogs in club groundhog competitions. These are fun matches that you can shoot with a variety of rifles. Our first choice would be a 22 BR for ranges out to 450 yards or a 6 BRA if targets are farther out. One popular match in the Northeast is the St. Thomas Ground hog shoot in Pennsylvania (see below).
At clubs across the country, varmint fun shoots (also known as “groundhog matches”) are becoming more popular every year. In these matches, usually shot from the bench, you engage paper targets, clay pigeons, steel “critter” silhouettes, or some combination of paper and reactive targets. Shooters like these matches because you can shoot a wide variety of rifles, you don’t have to spend a fortune to be competitive, and there is fun for the whole family. Rules are inclusive — you won’t be turned away because your rifle is two ounces overweight. A large percentage of the match fees usually go back to shooters in the form of cash prizes. And the level of camaraderie is high.
St. Thomas Groundhog Shoot, Report by Jonathan Trivette
Nestled at the base of a mountain in south-central Pennsylvania is the St. Thomas Sportsmen’s Association. On a cool Saturday morning you’ll find some of the area’s best shooters at the monthly Groundhog Match. The match attracts shooters from Virginia, Maryland, West Virginia, and of course Pennsylvania.
It may not be the longest-yardage match in the area, but it can be the one of the toughest. The range is sloped up the mountain a little so the winds can be very tricky. Often times the three wind flags at 200, 300, and 400 yards will all be blowing in different directions.
* “Groundhog” and “Woodchuck” are simply two different names for the same animal. Both terms have been used in the English language since the 1600s. In many places, the terms are used interchangeably, but “groundhog” is now increasingly more common in the USA.
Share the post "Saturday at the Movies: Spring Groundhog Hunting Videos"
AccurateShooter’s Target Page provides over 50 FREE downloadable targets. You’ll find all types of targets — sight-in targets, varmint targets, rimfire targets, bullseye targets, tactical targets, load development targets and more. CLICK HERE for all our free targets, including our popular LOAD DEV target.
On this load development target, all your load data fits neatly in the boxes under each target. The diamonds have 1/2″ sides and you can align your cross-hairs on the horizontal and vertical lines. When we test, we crank in a little elevation, setting the point-of-impact higher. That way our shots fall in the gray circles, leaving the red diamonds intact for precise aiming.
Storm Tactical Targets — Hundreds of FREE, Printable Targets
If you want an even greater selection of targets, specialized for PRS and NRL shooters, Storm Tactical offers a vast collection of tactical targets, available in three different versions: MOA, MIL Yards, and MIL Meters. These target sets were created with input from Sniper’s Hide. Storm Tactical also created a great rimfire target set. This includes side-by-side target blocks for fun, one-on-one competition. If you shoot NRL22 or just enjoy shooting with a buddy, we highly recommend the rimfire target set.
Overall there are 299 Storm Tactical Targets in four sets.
CLICK links to launch each Storm Tactical target collection. Then you can click the download icon to save to your hard drive. OR, you can scroll up and down to select the target(s) you like which you can tell your printer to print. We do recommend downloading the complete archives. File sizes are listed.
Here’s a Tikka T3 in Third Eye Tactical cerakoted chassis.
Rimfire Twin Target, for One-on-One Shooter Challenges
You’ll find this fun target on the third page of the Rimfire Target Pack. Just download the PDF file and instruct your printer to deliver page three. Or print out all six (6) rimfire targets if you like.
Share the post "GET FREE MIL or MOA Precision Targets Plus Rimfire Fun Targets"
Last year, the Garand Collectors Association (GCA) and Civilian Marksmanship Program (CMP) launched the Master Marksman Program for CGA members. This program was created to reward participation in CMP matches with As-Issued M1 Garand rifles. To participate, a competitor must be a current member of the GCA. Garand competitors can easily obtain CGA memberships through the GCA website, and a Garand competitor can even join the GCA the day of the match.
Similar to the CMP’s Distinguished Badge Program, the CGA/CMP Master Marksman Program uses an Achievement Award point system, based on performance at CMP events (listed below). Points are awarded with Gold (10 pts), Silver (8 pts) and Bronze (6 pts) levels. Competitors must reach a total of 40 points overall, with one gold and one additional gold or silver required. All other points may be bronze or greater. In 2023, 16 GCA member competitors were awarded the GCA’S Master Marksman Award.
Only As-Issued M1 Garands may be used. Competition Rules for the John C. Garand Match (Course A: 30 rounds) will be followed as defined in the CMP Games Rifle and Pistol Competition Rulebook. Those who fire in re-entry events will only be able to use their highest score as points.
2024 Eastern Games (North Carolina) April 26 – May 5, 2024
2024 Talladega D-Day Matches (Alabama) June 6-9, 2024
2024 National John C. Garand Match (Ohio) August 1-4, 2024
2024 New England Games (Vermont) September 23-29, 2024
2024 Western Games (Arizona) October 7-13, 2024
2024 Talladega 600 (Alabama) November 8-14, 2024
You can find the match programs, event schedule, registration information by visiting the CMP Travel Games website. If you have questions about the CGA/CMP Master Marksman Program, contact CMP’s Christina Roguski at 419-635-2141, ext. 714 or croguski@thecmp.org.
This CMP Video Explains the Process for Ordering an M1 Garand from the CMP:
The GCA is proud of its partnership with the Civilian Marksmanship Program (CMP). The CMP is a federally chartered 510(c)(3) corporation dedicated to leading the nation in marksmanship excellence providing safe, high quality and innovative programs with a focus on youth.
Share the post "GCA/CMP Master Marksman Program for M1 Garand Competitors"
Mark your calendars for the return of the Civilian Marksmanship Program’s Bianchi Cup International Pistol Tournament! The second longest-running pistol championship in the world, the 2024 CMP Bianchi Cup is set to fire May 21-24, 2024 at the Green Valley Rifle & Pistol Club in Hallsville, Missouri.
Registration for the 2024 Bianchi Cup is now open. Learn more about the 2024 CMP Bianchi Cup and register today at TheCMP.org/bianchicup.
The Bianchi Cup is comprised of four events, including:
The Practical Event, where competitors fire at distances from 10 yards to 50 yards under varying time limits from the shooting line.
The Barricade Event, where competitors fire at targets on either side of the barricade at different distances and under varying time limits from within shooting boxes and behind barricades.
The Falling Plate Event, where competitors fire at eight-inch round steel plates arranged in banks of six at distances from 10 to 25 yards under varying time limits.
The Moving Target Event, where competitors fire from within shooting boxes at distances ranging from 10 to 25 yards at a target moving from left to right, with the target exposed for six seconds.
Competitors shoot from both standing and prone positions and are also required to shoot with both strong and weak hands at various stages. There are no makeup shots in the Bianchi Cup, adding to the challenge.
The annual competition is popularly called the Bianchi Cup — from the trophy named for one of the founders, John Bianchi. Since it’s launch over 30 years ago, the match has become the richest handgun tournament in the world.
NEW FOR 2024! A Rimfire Division has been added to the Bianchi Cup to encourage participation from juniors not shooting centerfire pistols as well as adults who want to warm up for the Bianchi Cup in a less expensive manner. The Rimfire Division offers a memorable Bianchi Cup experience at a fraction of the ammo cost. This division will encompass the same basic rules for each of the current setups — Open, Production/Production Optics, Metallic and Revolver.
Bianchi Cup Open Class Pistol — Features in Review
The Bianchi Cup has been called the most prestigious pistol tournament in the world. Due to the high accuracy required in each stage of the Bianchi Cup, the tournament is considered one of the most difficult handgun championships on the planet.
Bianchi Cup — the Richest Handgun Match on the Planet
Over the past 30+ years the Bianchi Cup has become the richest handgun event in the world, with cash and prizes for the best scores on four stages of fire for both revolver and semi-auto pistol divisions.
Bianchi Cup — Classic Course of Fire
The Bianchi Cup is a combination of Speed and Accuracy. Competitors shoot from both standing and prone positions and are also required to shoot with both strong and weak hands at various stages. Stages may combine stationary and moving targets. The Course of Fire consists of four separate matches:: Practical, Barricade, and Moving Target, and Falling Plates. Each of the four events requires 48 shots to complete. 480 points are possible on each event. Three of the four are scored on the NRA tombstone P1 target. You must hit in the 10-ring or inner X-Ring on EVERY shot to shoot a “clean” 1920.
About the Green Valley Rifle & Pistol Club
The Green Valley Rifle & Pistol Club, formerly the Chapman Training Academy, has been the annual host of the Bianchi Cup since its inception. The origin of the club days back to the 1930s and has played a major role in the creation of the practical shooting discipline. The facility holds several ranges, including two movers, a Bianchi barricade, two 50-yard Bianchi practical ranges, a 250-plus yard rifle range and a falling plates range. CLICK HERE for range information.
Share the post "2024 CMP Bianchi Cup Next Month in Missouri"
In this article, three great champions reveal their wind-calling secrets in video interviews. We first published this “Three Champions” story a few years ago. If you are a competitive shooter, and you want to learn more about reading the wind, you should watch all three of these interviews. These guys are among the best shooters to ever shoulder a rifle, and they have much wisdom to share.
At the 2010 SHOT Show, we had the unique opportunity to corner three “superstars” of High Power shooting, and solicit their wind-reading secrets. In the three videos below (in alphabetical order), Carl Bernosky (10-Time Nat’l High Power Champion), David Tubb (11-time Nat’l High Power Champion and 7-time Nat’l Long-Range Champion), and John Whidden (6-Time Nat’l High Power Long-Range Champion) shared some of the wind-doping strategies that have carried them to victory in the nation’s most competitive shooting matches. This is GOLD folks… no matter what your discipline — be it short-range Benchrest or Long-Range High Power — watch these videos for valuable insights that can help you shoot more accurately, and post higher scores, in all wind conditions.
We were very fortunate to have these three extraordinarily gifted champions reveal their “winning ways”. These guys REALLY know their stuff. I thought to myself: “Wow, this is how a baseball fan might feel if he could assemble Babe Ruth, Hank Aaron, and Ted Williams in the same room, and have them each reveal their hitting secrets.” Editor’s Note: These interviews were conducted before all three men won their most recent National Championships so the introductions may list a lower number of titles won. For example, John Whidden won back-to-back LR Championships in 2016 and 2017.
Top photo courtesy Rifleman’s Journal.
Share the post "Three Great Rifle Champions Reveal Their Wind-Reading Secrets"
Thank to efforts by the NSSF, and the ATF adopting eForms, you can now get a suppressor purchase authorization with a far shorter wait time. NSSF began working to improve ATF NFA form processing in 2013 when it pressed the agency to institute electronic form processing, or eForms. This has had significant positive effects in reducing NFA wait times. As a result you can pay the required Federal $200 tax and obtain suppressor purchase authorization much more quickly.
Suppressors are now legal in 42 U.S. States. There are certain legal requirements for obtaining a suppressor, including paying a $200 Tax Stamp. To own a suppressor you must be legally eligible to purchase a firearm, pass a BATFE background check, pay a one time $200 Transfer Tax, and satisfy age requirements. The process for paying the $200 requires submitting an ATF Form 4 for each suppressor that you purchase. You can submit either electronically or via paper. The Form 4 authorizes transfer of the suppressor from the dealer or manufacturer to you. MORE INFO HERE.
A significant drop in processing wait times on submitted National Firearms Act (NFA) forms is shown in a new Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) report. The ATF has revealed that the average wait time on a paper NFA Form 4 — the most popular NFA form submitted — dropped to an average of 245 days for processing, while average processing times for electronic eForm 4s dropped to 53 days. Previously, wait times on Form 4s were near 280 days for paper form processing and between 90 and 190 days for electronic processing. NSSF has learned that in some cases fully electronic Form 4s were processed in as few as four days and in some cases on the same day.
Form 3 processing times also dropped with reports of of them being processed in as few as four days. Form 5 processing wait times for the tax-exempt transfer and registration of firearms dropped down to 19 days for paper forms and an average of one day for the electronic form.
OPINION: Suppressors Should Not Be Subject to NFA Regulation
NSSF continues to support the Hearing Protection Act and other proposed legislation that would remove silencers, commonly called suppressors, from the National Firearms Act. Suppressors are devices that provide hearing protection for hunters and target shooters. They are legal to own in 43 states and to hunt with in 42 states. Removing suppressors from the NFA would free up considerable ATF resources unnecessarily spent processing paperwork.
Share the post "ATF Wait Times for NFA Form Processing Significantly Reduced"
Firearms Industry Economic Impact Rises 371% Since 2008
The total economic impact of the firearms and ammunition industry in the United States increased from $19.1 billion in 2008 to $90.05 billion in 2023, a 371% increase, while the total number of full-time equivalent jobs rose from approximately 166,000 to over 384,437, a 131% increase in that period, according to a report released by the NSSF®, The Firearm Industry Trade Association.
On a year-over-year basis, the industry’s economic impact rose from $80.73 billion in 2022, to $90.05 billion in 2023. The firearm industry has broader impacts throughout the economy. It supports and generates business for firms seemingly unrelated to firearms, such as banking, retail, accounting, metal working, and printing among others.
Shooting Industry Generates $11.8 Billion in Tax Revenues
The firearm and ammunition industry paid over $10.90 billion in business taxes, including property, income, and sales-based levies. An additional $944 million was paid in Federal excise taxes, which directly contributes to wildlife conservation. The combined business and excise taxes adds up to a total of $11.8 billion in tax revenue!
“Our industry is a vital economic contributor to every state and every community. These are companies employing men and women from all walks of life and they prove daily that the American firearm and ammunition industry is strong”, said Joe Bartozzi, NSSF President and CEO. “This industry proudly provides the means for law-abiding citizens to exercise their Second Amendment rights, enables them to hunt and is the primary fiscal force behind wildlife conservation in America. The growth of the firearm industry equals more jobs that add to our local economies, averaging $67,500 in wages and benefits, up from $65,000 reported last year. Since 2008, federal business tax payments increased by 353%, Pittman-Robertson excise taxes on firearms and ammunition that support wildlife conservation by 168% and state business taxes by 215%.”
Firearms and Ammunition Industry is Vital Part of America’s Economy
Companies in the United States that manufacture, distribute, and sell firearms, ammunition, and hunting equipment employ as many as 154,611 people in the country and generate an additional 229,826 jobs in ancillary industries. These include jobs in supplying goods and services to manufacturers, distributors, and retailers, and those that depend on sales to workers in the firearm and ammunition industry.
The annual Firearm and Ammunition Industry Economic Impact Report provides a state-by-state breakdown of job numbers, wages and output covering direct, supplier and induced employment, as well as federal excise taxes paid. CLICK HERE to get the full 7-page NSSF report (PDF).
Share the post "Shooting Industry Adds $90 Billion to U.S. Economy Annually"