Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









July 14th, 2024

Sunday GunDay: Rimfire Sporter Competition at Camp Perry

cmp rimfire sporter camp perry 2019

The CMP’s 2024 National Rimfire Sporter Match took place yesterday, July 13th, 2024 on the Viale Range at Camp Perry. Hundreds of participants took part in this major summer rimfire competition. Click HERE for 2024 Match Photos. One of the most popular events at Camp Perry, the Rimfire Sporter Match attracts hundreds of shooters from 8 to 80 years, novices as well as experienced competitors. It is a great event for shooters who want to have fun without spending a small fortune on rifle, optics, gear and ammo. Along with the major annual Camp Perry event, other Rimfire Sporter matches are held throughout the country in connection with the CMP’s Travel Games.

cmp rimfire sporter camp perry 2019

The CMP Rimfire Sporter discipline is for .22 LR smallbore (rimfire) rifles that weigh 7 1/2 pounds or less. Firing is done at 25 and 50 yards in prone, sitting, and standing positions, in slow and rapid-fire modes. Even with the vast number of competitors, the Rimfire Sport match proceeds efficiently. The CMP now has a special smart-phone App that helps speed up scoring. SEE 2024 Results.

cmp rimfire sporter camp perry competition
cmp rimfire sporter camp perry competition

Each summer, the major National Rimfire Sporter Match attracts hundreds of shooters to the shore of Lake Erie at Camp Perry. This year’s Rimfire Sporter Match at Camp Perry was held on Saturday, July 13, 2024. The CMP National Rimfire Sporter Rifle Match offers shooters a recreation-oriented competition where they use affordable, smallbore sporter rifles with either scopes or iron sights. All you need are a .22 LR rifle, sling, and ammo. Competitors will need a total of 60 rounds to fire the Rimfire Sporter Match plus any sighters or range alibis.

FREE GUIDE: 48-Page CMP Guide to Rimfire Sporter Shooting »

cmp rimfire sporter camp perry 2019

Three Classes for Rimfire Sporter
Rimfire Sporter competitors can fire in three different rifle classes. The O-Class rifles must have open sights. T-Class rifles have 6-power max scopes or receiver sights. The third class is TU Rimfire Class (Tactical and Unlimited). Competitors may enter in Single or Double Entry options and then select the rifle class(es) in which they will fire. Firing is done at 25 and 50 yards in prone, sitting and standing positions, in slow and rapid-fire modes. For each Class, awards are offered to High Juniors, High Seniors, and High Women as well as Overall Winners.

Camp Perry Rimfire Sporter match
Camp Perry Rimfire Sporter match

Rifles used during the competition may be manually operated or semi-automatic, shot hand-held with sling allowed. Competitors will complete slow fire prone, rapid fire prone, slow fire sitting or kneeling, rapid fire sitting or kneeling, slow fire standing and rapid fire standing shot sequences. Firing is done at 25 and 50 yards on a target with a 1.78″ ten-ring. The target is simple enough for a beginner to hit, yet challenging enough. See explanation of course of fire below. Competitors must supply their own quality ammunition for this match. For more info about the Rimfire Sporter Match, CLICK HERE.

Rimfire Sporter Match CMP Camp Perry

The CMP Rimfire Sporter Rifle Match is an inexpensive, fun-oriented competition using .22 caliber sporter rifles (plinking and small game rifles). To compete, all you need is a basic rifle, safety gear, and ammunition. No fancy, high-dollar rifles are required. Many junior and senior clubs make the National Rimfire Sporter Match an annual tradition — bringing together marksmen of all ages. SEE 2024 CMP Games Rules PDF.

National Rimfire Sporter Match Camp Perry 2016

If there is a single CMP event at Camp Perry every summer that offers the highest level of shooter satisfaction, the most diverse group of competitors, and the lowest cost of entry, that would have to be the annual Rimfire Sporter Match. Shooters run a huge range of ages from young juniors to seniors in their 70s and 80s. And persons with disabilities can compete as well, with Adaptive Shooting Programs for physically-challenged competitors.

National Rimfire Sporter Match Camp Perry 2016

Each year, the Rimfire Sporter Match attracts hundreds of shooters to the shore of Lake Erie at Camp Perry. The CMP National Rimfire Sporter Rifle Match offers shooters a recreation-oriented competition where they use affordable, smallbore sporter rifles with either scopes or iron sights. All you need are a .22 LR rifle, sling, and ammo.

National Rimfire Sporter Match Camp Perry 2016
Rifles may be manually operated or semi-automatic, in three classes: the standard “O Class” for open-sighted rifles, “T-Class” for telescope-sighted rifles, and the “TU Class” for Tactical and unlimited rifles.

National Rimfire Sporter Match Camp Perry 2016

Rimfire Sporter Equipment

cmp rimfire sporter camp perry competition

Rimfire Sporter Course of Fire

Competitors will complete slow fire prone, rapid fire prone, slow fire sitting or kneeling, rapid fire sitting or kneeling, slow fire standing, and rapid fire standing shot sequences. To learn more about the National Rimfire Sporter Match, CLICK HERE.

National Rimfire Sporter Match Camp Perry 2024

National Rimfire Sporter Match Camp Perry 2024

Rimfire Sporter Match Basics
The CMP Rimfire Sporter Rifle Match is an inexpensive, fun-oriented competition using .22 caliber sporter rifles (plinking and small game rifles) commonly owned by most gun enthusiasts. To compete, all you need is a basic rifle, safety gear, and ammunition. No fancy, high-dollar rifles are required.

Rimfire Sporter Guide ShootingThe event is shot with standard sporter-type, rimfire rifles weighing no more than 7 ½ lbs, with sights and sling. Rifles may be manually-operated or semi-automatic. Shooters with manually-operated actions are given extra time in the rapid-fire stage to compensate for the difference.

There are three classes of competition — the standard “O Class” for open-sighted rifles, “T-Class” for telescope-sighted and rear aperture-sighted rifles and “Tactical Rimfire” class, which is a .22 caliber A4 or AR15 style rifle. Firing for all classes is done at 25 and 50 yards on a target with a 1.78″ ten-ring and an 18″ outer one-ring. Even new shooters can get hits on this target, but it’s still tough enough that a perfect 600×600 score has only been accomplished once as far as we know (Go to 2024 Results).

The Civilian Marksmanship Program (CMP) has a CMP Guide to Rimfire Sporter Shooting. This FREE, 48-page digital publication covers equipment, positions, course of fire, rules, scoring and much more. You’ll find helpful “how-to” sections on aiming, sight picture, hold control, and trigger control. Reading these instructional sections can benefit any prone or three-position competitive shooter.

National Rimfire Sporter Match Camp Perry 2016
cmp rimfire sporter camp perry 2019

Permalink - Videos, Competition, Shooting Skills 1 Comment »
July 14th, 2024

Inside Look at Nosler Factory, Plus Nosler Load Data Links

Nosler bullets nosler.com website ecommerce

Ever wanted to see how Nosler bullets and cartridges are made? Here’s your opportunity. The Rocky Mountain Elk Foundation (RMEF) has produced a video (“Quality First”) that offers a behind-the-scenes look inside Nosler’s Oregon factory that produces bullets, brass, and ammunition.

Video Showcases Nosler Production Facility and Ballistics Lab

RMEF representatives were provided with unprecedented access into Nosler’s famously-guarded manufacturing plant to show the technology used by Nosler to produce bullets and ammunition. The “Quality First” video showcases Nosler’s complex production processes that include technologically advanced machinery, and stringent quality control measures.

Nosler bullets nosler.com website ecommerce

After the intro, this video illustrates Nosler’s bullet construction techniques with an excellent animation sequence. The video then showcases the Nosler ballistics lab, inspection room, and packaging line. The video shows the bullet construction techniques followed by a ‘walk-though’ in the factory, showing the machinery used to make bullets, brass, and ammunition.

Information Resources — Load Data and Nosler Blog

The Nosler website also features comprehensive LOAD DATA, plus informative content in the Nosler Blog. The Load Data page works well on smartphones. Go to the Load Data Index Page, then simply scroll down to a caliber. Then select your cartridge type and bullet weight(s). The rifle listings are quite comprehensive, covering .17 caliber up to .458 caliber. Here is an example of Nosler load data for the 6mm Creedmoor with popular 105-107gr bullets.

Nosler load data 6mm 6.5 creedmoor

Permalink - Videos, Bullets, Brass, Ammo No Comments »
July 14th, 2024

How Cartridge Brass Is Crafted — Production Process Revealed

deep draw cartridge brass animated gif

Rifle cartridge brass manufacturingPrecision Benchrest and F-Class shooters favor premium brass from Lapua, Norma, Peterson, or RWS. (Lake City also makes quality brass in military calibers.) Premium brass delivers better accuracy, more consistent velocities, and longer life. Shooters understand the importance of good brass, but many of us have no idea how cartridge cases are actually made. Here’s how it’s done.

Top Deep-Draw Ram Illustration from Demsey Mfg.

The process starts with a brass disk stamped from strips of metal. Then, through a series of stages, the brass is extruded or drawn into a cylindrical shape. In the extrusion process the brass is squeezed through a die under tremendous pressure. This is repeated two or three times typically. In the more traditional “draw” process, the case is progressively stretched longer, in 3 to 5 stages, using a series of high-pressure rams forcing the brass into a form die. While extrusion may be more common today, RWS, which makes some of the most uniform brass in the world, still uses the draw process: “It starts with cup drawing after the bands have been punched out. RWS cases are drawn in three ‘stages’ and after each draw they are annealed, pickled, rinsed and subjected to further quality improvement measures. This achieves specific hardening of the brass cases and increases their resistance to extraordinary stresses.” FYI, Lapua also uses a traditional draw process to manufacture most of its cartridge brass (although Lapua employs some proprietary steps that are different from RWS’s methods).

RWS Brass Cartridge Draw process

After the cases are extruded or drawn to max length, the cases are trimmed and the neck/shoulder are formed. Then the extractor groove (on rimless cases) is formed or machined, and the primer pocket is created in the base. One way to form the primer pocket is to use a hardened steel plug called a “bunter”. In the photos below you see the stages for forming a 20mm cannon case (courtesy OldAmmo.com), along with bunters used for Lake City rifle brass. This illustrates the draw process (as opposed to extrusion). The process of draw-forming rifle brass is that same as for this 20mm shell, just on a smaller scale.

20mm cartridge brass forming

20mm Draw Set Oldammo.com

River Valley Ordnance explains: “When a case is being made, it is drawn to its final draw length, with the diameter being slightly smaller than needed. At this point in its life, the head of the draw is slightly rounded, and there are no provisions for a primer. So the final drawn cases are trimmed to length, then run into the head bunter. A punch, ground to the intended contours for the inside of the case, pushes the draw into a cylindrical die and holds it in place while another punch rams into the case from the other end, mashing the bottom flat. That secondary ram holds the headstamp bunter punch.


This video employs DEFORM-2D software to show the draw process for brass casings.

Lake City Brass bunterThe headstamp bunter punch has a protrusion on the end to make the primer pocket, and has raised lettering around the face to form the headstamp writing. This is, of course, all a mirror image of the finished case head. Small cases, such as 5.56×45, can be headed with a single strike. Larger cases, like 7.62×51 and 50 BMG, need to be struck once to form a dent for the primer pocket, then a second strike to finish the pocket, flatten the head, and imprint the writing. This second strike works the brass to harden it so it will support the pressure of firing.”

Thanks to Guy Hildebrand, of the Cartridge Collectors’ Exchange, OldAmmo.com, for providing this 20mm Draw Set photo. Bunter photo from River Valley Ordnance.

Permalink Bullets, Brass, Ammo, Gear Review, Tech Tip No Comments »