TEN Shots in 0.303″ (0.289 MOA) at 100 Yards
Look at that target showing TEN shots at 100 yards, with eight (8) shots in the main cluster at the top. The ten-shot group measures .303″ (0.289 MOA), as calculated with OnTarget Software. Not bad for a handgun — a very nice bolt-action XP-100 pistol! What do you think, can your best-shooting rifle match the 10-shot accuracy of this XP-100 pistol?
Report by Boyd Allen
This story goes back a few seasons… this remarkable XP-100 pistol belongs to Dan Lutke, a Bay Area benchrest shooter who publishes the results for the Visalia matches to the competitors and the NBRSA. He has been an enthusiastic competitor for an number of years, at various ranges, notably Visalia and Sacramento. The action is a Remington XP-100, to which a Kelbly 2 oz. trigger has been fitted. On top is an old Japanese-made Tasco 36X scope (these were actually pretty darn good). The Hart barrel (a cast-off from Dan’s Unlimited rail gun) was shortened and re-chambered for the 6x45mm, a wildcat made by necking-up the .223 Remington parent case. The custom stock/chassis was CNC-machined by Joe Updike from 6061 Billet Aluminum to fit the XP-100 action and mount a target-style AR grip with bottom hand rest. The gun was bedded and assembled by Mel Iwatsubu. In his XP-100 pistol, Dan shoots 65gr custom boat-tails with Benchmark powder.
This diagram shows the most common 6x45mm wildcat, which is a necked-up version of the .223 Remington parent cartridge. NOTE: The dimensions for Dan Lutke’s benchrest version of this cartridge may be slightly different.
ACAD drawing by Peter Gnanapragasam CC by SA 3.0, via Wikimedia Commons. Title Added.
Share the post "Ten Shots in 0.289 MOA — Can Your Rifle Beat This XP-100 Pistol?"
With the price of premium scopes approaching $3500.00 (and beyond), it’s more important than ever to provide extra protection for your expensive optics. ScopeCoat produces covers that shield scopes with a layer of neoprene rubber (wetsuit material) sandwiched between nylon. In addition to its basic covers, sold in a variety of sizes and colors, ScopeCoat has a line of heavy-duty 6mm-thick XP-6 covers that provide added security. CLICK HERE to review the full line of ScopeCoats on Amazon (#ad).
Triple-Thickness XP-6 Model for Added Protection
The XP-6 Flak Jacket™ is specifically designed for extra protection and durability. The 6mm-thick layer of neoprene is three times thicker than the standard ScopeCoat. XP-6 Flak Jackets are designed for tall turrets, with sizes that accommodate either two or three adjustment knobs (for both side-focus and front-focus parallax models). To shield an expensive NightForce, March, or Schmidt & Bender scope, this a good choice. XP-6 covers come in black color only, and are available for both rifle-scopes and spotting scopes.
The heavily padded XP-6 Flak Jacket is also offered in a Zippered version, shown at right. This is designed for removable optics that need protection when in storage. The full-length, zippered closure goes on quick-and-easy and provides more complete protection against dust, shock, and moisture. These quality XP-6 scope covers are available on Amazon for $21-$38 (#ad).
Special Covers for Binos and Red-Dots ScopeCoat offers other specialized protective products, including oversize covers for spotting scopes, protective “Bino-Bibs” for binoculars, rangefinder covers, even sleeves for small pistol scopes and red-dot optics. There are also custom-designed covers for the popular Eotech and Trijicon tactical optics.
Share the post "Protect Your Valuable Optics with Fitted Neoprene Scope Covers"
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. Bullet Central — Save 7% Site-Wide
⏺ Save on ammo, bullets, brass, dies, actions, optics, barrels, and more
Bullet Central is a great source for products for competitive shooting and game hunting. Bullet Central carries top products and now you can save 7% off EVERYTHING with code FCLASSJOHN7. This is a great time to pick up components, actions, and more and save money on items you rarely see on sale.
2. CDNN Sports — Ruger American Gen II with Scope, $599.99
⏺ Great deal on modern hunting rifle with Bushnell scope
Need a rifle for your fall hunt? Save $199 on this Ruger American Rifle at CDNN Sports. For $599.99 this gray-stocked rifle comes complete with a 4-12x40mm Bushnell hunting scope, and 20″ fluted barrel (with brake). Choose .204 Ruger, .223 Rem, .243 Win, .308 Winchester, or .450 BM chamberings. In addition, for the same $599.99 price, there are versions with FDE tan stock or green stock and 16.1″ or 16.4″ barrels offered in .223 Rem, 300 Blackout, and .450 BM. All these Ruger American Gen II rifles come with 4-12x40mm Bushnell scope and rings, adjustable trigger, and Cerakote metal finish.
3. Creedmoor Sports — Peterson Cartridge Brass Sale
⏺ Large selection of strong, long-lasting cartridge brass
Peterson crafts quality, long-lasting made-in-USA cartridge brass. Right now you can get major savings with the Peterson Brass Sale at Creedmoor Sports. You’ll find a wide selection of cartridge types, many offered at 15% Off — a significant discount.
4. Natchez — Reloading Press and Press Kit Sale
⏺ Major savings on reloading presses, combo kits, and progressives
Natchez is running a big Reloading Press and Press Combo sale. Save up to $155 on Press Combo sets from RCBS, Hornady, and Lyman. These combos can include press, scale, priming tools, powder measures and more. There are also deals on multi-stage progressive presses from Lee and Hornady. And if you just need a single-stage press, there are big savings on RCBS, Lee, Redding, Lyman, and Hornady presses. For example, you can get the RCBS Rock Chucker Supreme for $199.99, $42 off the regular price.
5. Midsouth — .308 Cal 168gr BTHP Bullets, 250 for $64.99
⏺ Good .308 practice bullets for just $26 per 100
Quality .308-caliber bullets can be expensive. If you practice frequently with a .308 Win or .30-06 rifle, consider these Classic Match Bullets from a major American bullet-maker. These bullets are a good choice for Garand or Modern Military rifle shooters who practice often. And the price is great — just $64.99 for 250 bullets. That works out to just $0.26 per shot. NOTE: If you want to test these bullets first, you can get a 25-count Sample Pack for just $9.00.
⏺ Top choice for PRS/NRL competition, plus 15% Off Code
For NRL22 or PRS/NRL matches, you’ll want a FFP scope with 0.1 Mil clicks. While you can spend over $2k on a suitable optic, we suggest getting the Vortex Strike Eagle 5-25x56mm for $799.99. This has good glass, a handy EBR-7C “Xmas Tree” reticle, and great owner reviews: “You cannot find a better scope for this price. Great glass and built sturdy with 34mm tube”; “Best bang for your buck. Clear glass, turrets track extremely well”; “[Great] for NRL22 … consistently repeatable when dialing for distance. Highly recommend.” To make this deal even better, EuroOptic offers free 2-day shipping, PLUS you get 12% Off with Code VTX12. That lowers your net cost to $703.99, a $96 savings.
7. Palmetto State Armory — TaurusTX 22 .22 LR Pistol, $249.99
⏺ Amazingly low price on rimfire pistol with good accuracy and ergonomics
With .22 LR rimfire pistols you can enjoy target shooting for a fraction of the ammo cost of centerfire handguns. And the low rimfire recoil is good for developing your shooting skills. Right now, the nicely-designed TaurusTX 22 Pistol is on sale at a bargain price — just $249.99. This gray-framed pistol has a good ergonomic grip and a crisp trigger. Owners report the TX 22 is very reliable and quite accurate.
Having a reloading scale with a built-in trickler makes loading faster and more efficient. If you need a compact scale, consider this Reloading Basic ERS2000 Electronic Scale (#ad). This unit reads up to 2000 grains with 1/10th grain accuracy. The included powder trickler mounts securely on the top of the blue scale housing. This ERS2000 scale comes with a convenient powder tray plus check-weights. NOTE: This unit has a power cord that plugs into a wall socket — it is NOT battery-powered.
9. TargetSports USA — Self-Inking Stamp for Targets, $5.99
⏺ Handy tool to stamp your own 2″ bullseyes on target
Are you tired of buying targets or wasting expensive printer ink just to shoot holes in paper? Consider this Self-Inking Target Stamp. With an easy-to-fill ink reservoir, you can stamp a grid of multiple targets or add 2″ red bullseyes to a printed target. NOTE: This target stamp is listed at 51mm, so it makes bulls 2 inches in diameter.
10. Amazon — Frankford Arsenal Hinged Ammo Box Sale
⏺ Good plastic ammo boxes with hinged lids that open completely
Built for stacking and available for wide range of cartridges, Frankford Arsenal Hinge-Top Ammo Boxes (#ad) work well for factory and/or hand-loaded ammunition. These boxes have a good hinge that prevents the lid from inadvertently closing. The lid clasp also provides a secure closure. Made from high-density polymer, these boxes are strong and durable so they can be stacked.
As an Amazon affiliate, this site can earn revenues through sales commissions.
Share the post "BargainFinder 463: AccurateShooter’s Deals of the Week"
After purchasing a new set of dies from Forster, Hornady, Redding, or Whidden Gunworks, you’ll want to disassemble the dies, inspect then, and then remove the internal grease and/or waxy coatings placed on the dies by the manufacturer. Below are two videos that show how to de-grease and clean dies as they come “out of the box” from the manufacturer. The videos also explain how to clean your dies after regular use. Cleaning your dies helps remove carbon, brass shavings, lube residues and other stuff that can get inside the dies.
In the first video, from Creedmoor Sports, Bill Gravatt (Creedmoor’s President) shows various methods for cleaning dies both when new and after they have accumulated carbon and lube after use. This video is definitely worth watching. In the second video, a Hornady technician shows the method for degreasing dies before first use. A convenient aerosol spray cleaner is used in the video. You can also use a liquid solvent with soft nylon brush, and cotton patches. NOTE: After cleaning you may want to apply a light grease to the external threads of your dies.
Creedmoor Sports Die Cleaning Video with Bill Gravatt
Hornady Video Showing Aerosol Cleaner
Clean Your Sizing Dies and Body Dies Regularly
These same techniques work for cleaning dies after they have been used for reloading. Many otherwise smart hand-loaders forget to clean the inside of their dies, allowing old case lube, gunk, carbon residue, and other contaminants to build up inside the die. You should clean your dies fairly often, particularly if you do not tumble or ultrasound your cases between loadings. It is most important to keep full-length sizing and body dies clean. These dies accumulate lube and carbon residue quickly.
Share the post "How to Properly Clean Reloading Dies — Die Maintenance Tips"
Some rifle ranges certainly are beautiful enough to be country clubs. Here is the scenic General Vokes Range in British Columbia, Canada.
August is National Shooting Sports Month. So be sure to get to the range sometime soon, preferably outdoors. Range time gets you away from the pressures of work, and is a great way to spend time with friends and family members.
We should remember the real reasons many of us enjoy the shooting hobby. Many of us like shooting because it gets us outdoors, away from work pressures. Shooting gives us a chance both to enjoy solitude as well as have fun with friends and family in the outdoors. For this Editor, a solo trip to the range in mid-week was often the perfect antidote to job stress. Going to a scenic venue and sending a few shots downrange was satisfying. And getting out of the hustle and bustle of the city did indeed calm the soul.
Talented 3-position shooter (and trick-shot artist) Kirsten Joy Weiss says that any day at the range is “always a good day”. Here is her photo to prove it. If that shot doesn’t motivate you to spend a day outdoor with rifles, we’re not sure what will. Here’s hoping you’ll have a chance to get in many fun days of shooting and/or hunting this summer and fall. That can be with air rifles, rimfire guns, or centerfire guns — they are all fun to shoot.
“Always a good day…” — Kirsten Joy Weiss
Share the post "Enjoy August — Get to the Range and Have Fun This Month"
Today, .30-06 M1 Garands and classic military rifles will fill the firing lines at Camp Perry. The National John C. Garand, Springfield, Vintage and Modern Military Match (GSMM) concludes today, Sunday, August 4, 2024. (See CMP Camp Perry 2024 Calendar.) Some participants will shoot just one rifle type, but there is also a combined GSMM 4-Gun Aggregate. This GSSM Agg encompasses a series of position shooting matches on NRA SR targets at the CMP Nationals. Match scores will be posted on the CMP National Matches Results Page.
This video shows the Garand Match at Camp Perry. The rifles are still the same a decade later…
The annual GSMM event is one of the most popular events at Camp Perry, drawing participants from around the nation. One of America’s top GSSM shooters is Brian Williams, who was profiled in our Daily Bulletin. The 4-gun Aggregate includes Garand, 1903 Springfield/1917 Enfield (or similar bolt rifle), M1 Carbine, and AR-type rifle for “Modern Military”. Remarkably, Brian won the GSMM 4-Gun at the CMP National Matches in Camp Perry three years in a row — the inaugural 2017 4-Gun Agg, plus 2018 and 2019. Below, Brian offers some thoughts on the classic wood-stocked rifles used in GSMM competition: M1 Garand, 1903 Springfield, and M1 Carbine.
M1 Garand Service and Maintenance
Shooting Sports USA (SSUSA) published an excellent article on Service and Maintenance of M1 Garand Rifles. This offers some smart tricks, such as using smoke from burning masking tape to darken the front sight post. There is also an older SSUSA article that covers basic cleaning and servicing and also explains how to upgrade the performance of your Garands. READ Article HERE.
M1 Garand Disassembly, Cleaning, and Lubrication
This Brownells video shows how to disassemble your M1 Garand.
This TekMat video explains how to clean and lubricate your M1 Garand.
Recommended M1 Garand Service Manuals
Among the many M1 Garand manuals available, we recommend the CMP’s U.S. Rifle, Caliber .30, M1: ‘Read This First’ Manual. This booklet covers take-down, reassembly, cleaning, lubrication, and operation. The manual comes with CMP rifles or can be purchased for $3.25 from the CMP eStore. The author of Garand Tips & Tricks says: “It’s one of the best firearms manuals I’ve seen and I highly recommend it.”
The Classic Wood Guns of CMP 4-Gun Competition
Perspectives on M1 Garand, M1903A3, M1917, and M1 Carbine
CMP 4-Gun ace Brian Williams provides perspectives on the “Wood Gun” game, with suggestions on how to improve your performance with the M1 Garand, M1903 Springfield, M1917 Enfield, M1 Carbine, and other 20th Century military rifles. Brian explains what to look for…
Q: What should one look for when acquiring older rifles for CMP 4-Gun Games — M1 Garand, M1903/1903A3, M1917, M1 Carbine? What are realistic budgets for these firearms? What kind of accuracy can one expect? What upgrades are important?
Brian: All of these military surplus rifles are out there, but they are getting harder to get your hands on. And, just like everything else, the prices continue to rise. Not that long ago you could get your hands on a M1 Garand for four or five hundred dollars. In today’s market they are usually about double that price. But understand that these rifles are all unique and all have a story to tell. No two are alike, or have the same story. Just like the guns themselves, there are fewer and fewer dedicated gunsmiths for these vintage rifles. But I promise if you look for a good smith, they are out there and they are some of the most interesting people you will ever meet.
M1 Garand — Of the four (4) centerfire guns I shoot in the CMP games, my favorite has to be the M1 Garand. There were over 6 million of them produced in a very short time period, and every single one has its own unique story, and that is just cool. M1 Garands are capable of good accuracy. I believe that a well-maintained M1 with at least a replacement barrel is capable of shooting between 1 and 1.5 MOA.
M1903A3 Springfield — I find that the sights on a M1903A3 are a little easier to see than the sights of the M1903, but both are very accurate rifles. Like most military rifles in the current climate the prices have risen dramatically, but there are some gems out there that can be had for far less than $1000. The nice thing about the Springfield rifle is that almost all of the accuracy than you would want can come from just replacing a worn out 80-year-old barrel. In terms of accuracy, I think a good M1903A3 can shoot 1 MOA most of the time.
M1917 Enfield — This rifle is the newest of my collection and it shoots very well, with just a new Criterion barrel — again about 1 MOA with iron sights. These rifles are very close in price to the M1903 Springfield. But if you do your homework and keep your eyes open, there are always great deals to be found. I actually prefer shooting the M1917 to my M1903A3, due primarily to the M1917’s cock-on-close bolt which allows smoother cycling.
Public domain photo from Armémuseum (The Swedish Army Museum).
M1 Carbine — By 1945 there had been more M1 Carbines built than Garands. Today the Carbine can be harder to find, and due to the scarcity the price has shot up and most military M1 Carbines are going for more than $1000 at this point. The great thing about the M1 Carbine is that as long as you have a good ammo supply this rifle can shoot. Honest. I have had countless numbers of people that tell me that there is not an M1 carbine that will shoot. I can tell you from experience that they will, but you are going to have to put in some time with one to learn how to get it to shoot where you want it.
The M1 Carbine shoots the .30 Carbine round, with 110gr bullet going about 1990 FPS. In comparison, the .30-06 Springfield round used in the M1 Garand is almost three times more powerful than the .30 Carbine.
Share the post "Sunday GunDay: Garand and Modern Military Rifles at Camp Perry"
A while back, Sinclair International’s Reloading Press Blog featured a “round-table” discussion of reloading techniques. Sinclair’s team of tech staffers were asked: “What do you feel is the one-most crucial step in precision reloading?”
Here are their responses (along with comments from our Editors):
Phil Hoham: “I feel that when working up a load do not go too high or too low in your powder charge. Stay away from ‘suggested loads’ you hear at the range, or on the internet. Always be sure to use a published reloading manual that presents not only minimums and maximums, but also pressure, velocity, and a proper range of powders used. Do not get distracted in the reloading process, and remain focused at all times during each step involved.”
AccurateShooter.com: Some loads presented on the Internet are OK as a starting point, but it is absolutely critical to understand that pressure maximums will vary considerably from one rifle to another (of the same chambering). For example, one 6mmBR rifle shooting 105gr bullets can max out with 30.0 grains of Varget powder, while another rifle, with the same chamber dimensions, but a different barrel, could tolerate (and perform better) with half a grain more powder. You need to adjust recommended loads to your particular rifle and barrel.
Pete Petros: “This could be a very broad topic, but if I were to pick one, it would be making sure to pay close attention, and weigh each and every powder charge to ensure that each load is exact and consistent. This is important not only for accuracy, but also for safety reasons.”
AccurateShooter.com: If you’re shooting beyond 200 yards, it is critical to weigh your loads with an accurate scale or automated system such as the AutoTrickler V3/V4. Loads that are uniform (within a few kernels) will exhibit lower Extreme Spread and Standard Deviation. And remember, even if you stick with the same powder, when you get a new powder lot, you may have to adjust your load quite a bit. For example, .308 Palma shooters have learned they may need to adjust Varget loads by up to a full grain from one lot of Varget to the next.
Ron Dague: “I feel that the most important step(s) in reloading for accuracy are in the initial case prep. Uniforming the primer pocket to the same depth to ensure consistency in primer seating is a crucial step. Additionally de-burring the flash holes, each in the same way to clean up and chamfer the inside is important. It ensures that the ignition from the primer is uniform and flows out in the same consistent pattern. Doing so will create uniform powder ignition and tighten up your velocity Extreme Spread.”
AccurateShooter.com: With some brands of brass, primer pocket uniforming and flash-hole deburring is useful. However, with the best Lapua, Norma, and RWS brass it may be unnecessary, or worse, counter-productive. So long as your Lapua brass flash-holes are not obstructed or smaller than spec, it may be best to leave them alone. This is particularly true with the small flash holes in 220 Russian, 6BR, and 6.5×47 cases. MOST of the flash-hole reaming tools on the market have cutting bits that vary in size because of manufacturing tolerances. We’ve found tools with an advertised diameter of .0625″ (1/16″) that actually cut an 0.068″ hole. In addition, we are wary of flash-hole deburring tools that cut an aggressive inside chamfer on the flash-holes. The reason is that it is very difficult to control the amount of chamfer precisely, even with tools that have a depth stop.
Rod Green: “I feel that bullet seating is the most important step. If you had focused on making sure all prior steps (case prep, powder charge, etc.) of the process have been carefully taken to ensure uniformity, bullet seating is the last step, and can mean all the difference in the world in terms of consistency. Making sure that the bullet is seated to the same depth each time, and time is taken to ensure that true aligned seating can make the load.”
Bob Blaine: “I agree with Rod. I strongly feel that consistent bullet seating depth is the most important step in creating the most accurate hand loads. I have seen the results in both my bench and long range rifles. Taking the time to ensure exactness in the seating process is by far, the number one most important step in my book.”
AccurateShooter.com: Agreed. When loading match ammo, after bullet seating, we check every loaded round for base of case to ogive length. If it varies by more than 3 thousandths, that round is segregated or we attempt to re-seat the bullet. We measure base of case to bullet ogive with a comparator mounted on one jaw of our calipers. You may have to pre-sort your bullets to hold the case-base to ogive measurement (of loaded rounds) within .003″.
Share the post "Expert Tips to Load the Most Consistent and Accurate Ammo"
A while back, RifleShooter online magazine published a list of the purported Ten Best Bolt-Action Rifles of All Time. Ten classic rifle designs (including the Remington 700, Winchester Model 70, Weatherby V, and Mauser 98) were featured with a paragraph or two explaining their notable features.
“Best” Lists Stir Controversy…
These Top 10 lists are always controversial. While most readers might approve of half the entries, there are always some items on the Top 10 list that some readers would challenge. Here is RifleShooter’s Top 10 list. What do you think? Are there some other bolt-actions that are more deserving?
1. Springfield M1903
2. Mauser 98
3. Winchester Model 70
4. Remington Model 700
5. Weatherby V
6. Sako L61/AV
7. Savage Model 110
8. Ruger M77
9. Tikka T3
10. Mannlicher-Schonauer
Share the post "Ten Best Bolt-Action Rifles Ever — Do You Agree with This List?"
Forum member F-Class John is an avid F-Class competitor and expert handloader. John reviews reloading hardware and shooting-related products for his popular F-Class John YouTube Channel, which now boasts 500+ videos. John also does important product testing for AccurateShooter.com. Through his YouTube channel, John has reviewed many of the latest and greatest reloading tools and accessories. For today’s Video Showcase, we selected seven F-Class John product reviews. Products tested include Ingenuity Products Powder Dispenser, AMP Mark II Annealer, Multiple Joystick front rests, Micron Reloading Dies, SEB Neo-X and Rodzille T-Rex (with field tests),
If you like these informative videos, consider joining F-Class John’s Patreon Channel for live video meetings, more in-depth videos, and detailed explanations. Join Patreon via Patreon.com/fclassjohn for full length videos, live chats, and more.
Ingenuity Precision Automated Powder Dispensing System
The innovative new Ingenuity Precision powder dispensing system is a true rival to the popular AutoTrickler system. F-Class John worked with the team at Ingenuity Precision during the development of this advanced, computer-controlled powder dispensing system and he is impressed with the results. John shows the Ingenuity Products unit in action with a variety of popular powder brands. He also demonstrates how the system can be conveniently controlled via an App on your cell phone. If precision powder dispensing is your goal, you should watch this video start to finish. When fine-tuned to the powder type, this machine can deliver exceptionally repeatable results. It is now available for PRE-ORDER.
AMP Annealing Mark II DB Annealer
The AMP Mark II DB Annealer is the latest and greatest microprocessor-controlled induction annealing machine from Annealing Made Perfect in New Zealand. This machine provides precise, exact annealing for your cartridge brass. Precision annealing can both improve reloading consistency and extend brass life dramatically. We know some 30 BR shooters with AMP annealers who have reloaded their cases over 20 times. In this video F-Class John explains the features of the AMP Mark II DB machine and shows how to create a “profile” for your brass that can be logged in the machine’s memory.
Rifle Front Rest Reviews — For F-Class and Benchrest
If you need a front rest for Benchrest or F-Open competition, this is a must-watch video when you are starting to shop. F-Class John reviews the features of numerous modern joy-stick front rests: SEB Neo-X (2:00 time-mark), SEB Min-X (tripod rest, 10:10 time-mark), 21st Century Hybrid Rest (19:54 time-mark), Rodzilla T-Rex (26:13 time-mark), Lenzi (33:58 time-mark), Caldwell Fire Control (37:26 time-mark). John has shot off most of these rests and his describes optional features on the products. The price range is significant — from about $249.99 for the Caldwell to $2000.00+ for some of the premium rests.
Micron Micrometer Seating Dies from Bullet Central
Micron dies are made with high quality and superb functionality. If you are looking for a premium micrometer-adjustable seating die, the Microns are definitely worth considering. These dies are offered by Bullet Central for a wide variety of cartridge types from .22 up to .30 calibers. Along with standard cartridge types such as .284 Win, 7mm WSM, 7mm RSAUM, .308 Win, and 300 RSAUM, Micron makes seaters for popular competition cartridges such as 22 GT, 6mm PPC, 6mm BR, 6 Dasher, 6 BRA, and 6 GT. At $325.00, these Micron dies are very pricey, but you can use Code MICRON15 at Bullet Central to save 15% on your Micron die purchase.
SEB NEO-X and Rodzilla Raptor Front Rests
This video covers two outstanding front joystick rests, the SEB Neo-X and the Rodzilla Raptor. Both of these rests work great for both benchrest and F-Class shooters, centerfire and rimfire. Build quality is outstanding for both rests. Tester F-Class John observes: “Both are great units and user preference will really dictate which to get. I own both and find they give me consistent target acquisition.” To learn more about these two excellent front rests, visit TheRodzilla.com and/or SEB Rests USA.
AutoDod IDOD Powered Neck-Turning Machine
Here is F-Class John’s review of the impressive AutoDod IDOD machine, the most sophisticated neck-turning machine on the planet. This F-Class Products machine uses twin precision cutter tips to turn case necks inside and out quickly and efficiently, with superior precision. The cases are held securely in a precision-machined spindle attached to an electric motor. Twin blades move precisely during the cutting process, milling the necks inside and out. The turned necks come out perfect every time, with the shoulders trimmed exactly (with doughnut removed) as well.
Bix’N Andy Dakota Triggers
This video reviews the popular Bix’N Andy Dakota Triggers sold by Bullet Central. These triggers can do double duty — working for competition AND field use. Starting at $199.99, the Dakota triggers offer excellent performance for the price, and there are models suited for popular factory actions including Remington, Tikka, Sako and more. These triggers are available with integrated safeties. The Dakota trigger is also built to perform in all weather conditions, a nice feature for hunting rifles. For most of the Bix’N Andy Dakota triggers, the pull weight adjusts from 0.88 lbs (400 grams) to 4.41 lbs (2000 grams).
This video includes a range demo segment where John shows how Dakota triggers function in two of his match rifles. If you think a Bix’N Andy Dakota trigger will work for you, use code FCDAKOTA20 to save 20% on the Dakota purchase price for a limited time.
Share the post "Saturday Movies: Notable Product Reviews by F-Class John"
“Science tells us that exposure to continuous noise of 85 dB for eight hours is enough to cause permanent hearing loss, and worse, spikes of 130 dB and more can result in permanent hearing damage instantly.” Source: NRA Blog.
The Risk of Hearing Loss
Hearing loss can be progressive and irreversible. If you are a shooter, this is serious business. As the NRA Blog cautions: “You may not even realize you’re harming your hearing. Hearing loss occurs gradually, and can go effectively unnoticed until symptoms become severe. By then, the damage is done.”Effective hearing protection is a must whenever you are shooting firearms or when you are in the vicinity of gun-shots. For ultimate protection, we recommend a good set of tapered foam earplugs, topped by ear-muffs. However, there are situations when you may prefer lighter-weight hearing protection that can be quickly removed. For example, if you are standing well behind the firing line as an observer, or if you are working as a rangemaster or waddie some distance away from the shooters.”
Sound Levels for Common Noises:
9mm Luger pistol: 160 dB
Jet aircraft engine (near): 140 dB
.22 LR pistol: 134 dB
Normal human pain threshold: 120 dB
Noisy Nightclub: 110 db
Riding Motorcycle at 65 mph: 103 db
Power Lawnmower: 95 dB
Hearing damage possible: 85 dB (sustained for 8+ hours)
Ringing Telephone: 80 dB
Normal conversation: 60 dB
What about suppressors? If you use a suppressor is it OK to dispense with hearing protection? Not really. Even the most effective suppressors, on the smallest and quietest calibers (.22 LR), reduce the peak sound level of a gunshot to between 110 to 120 dB. To put that in perspective, according to the National Institute for Occupational Safety and Health (NIOSH), that is as loud as a jackhammer (110 dB) or an ambulance siren (120 dB). For normal caliber handguns and rifles, suppressed sound levels routinely exceed 130 dB, just shy of OSHA’s “hearing safe” threshold of 140 dB. Accordingly, we recommend use of hearing protection even when shooting suppressed.
Compact, Low-Profile NRR 27 dB-Rated Ear Muffs
Many hunters and competitive shooters prefer low-profile ear muffs. As these typically have a lower Noise Reduction Rating, perhaps NRR 22-27, we recommend running earplugs under muffs. If you use low-profile electronic muffs, such as Howard Leight Impact Sport Muffs, you should still be able to hear range commands even with plugs underneath.
Another good option for hunters and range visitors are hearing bands, basically earplugs connected with a semi-rigid plastic band. These banded products provide “quick access” hearing protection for hunters. You can keep them handy around the neck while spotting game, and then insert the plugs before shooting.
Howard Leight MAX NRR 33 Earplugs, Just $8.44 for 20 Pairs
These Howard Leight NRR 33 Max-1 Plugs are your Editor’s favorite foam earplugs. Between shooting, motorcycling and mowing lawns, I probably have Howard Leight foam plugs in my ears 3-4 days a week. They are comfortable and the flared outer edge helps the NRR. You can get 20 pairs for $8.44 on Amazon. There is also a Max-30 corded version, with the same excellent 33 dB Noise Reduction Rating. Get five pairs of Max-30 Corded Plugs for $5.99 on Amazon, or 100 pairs of Max-30s for $27.99.
Note, if you prefer thin, light-weight earmuffs, we recommend running earplugs underneath for double protection while shooting firearms (or when you’re on the firing line). Sound experts tell us that running plugs and muffs together can effectively improve your effective noise reduction by 4-7 dB NRR.
Share the post "How High dB Sound Hurts Your Hearing, Plus Protection Options"
Watch this video to see how a sound suppressor (aka “silencer”, “moderator”, or “can”) is constructed, start to finish. It’s more complicated than you might expect — there are quite a few stages in the process. The video below shows the fabrication of a SilencerCo Octane 45 suppressor:
SilencerCo writes: “What, exactly, goes into making a silencer? It may be more than you’d expect. From cutting metal to chemical baths, to extensive quality control every step of the way, our streamlined process is more than just a few steps. Watch our newest video, HOW IT’S MADE: Octane 45, to catch a glimpse behind SilencerCo’s doors.”
How Loud Are Unsuppressed Rifles?
Firearms Are Loud — 140 dB to 175 dB. ASHA explains: “Almost all firearms create noise that is over the 140-dB level. Exposure to noise greater than 140 dB can permanently damage hearing. A small .22-caliber rifle can produce noise around 140 dB, while big-bore rifles and pistols can produce sound over 175 dB. Firing guns in a place where sounds can reverberate, or bounce off walls and other structures, can make noises louder and increase the risk of hearing loss. Also, adding muzzle brakes or other modifications can make the firearm louder. People who do not wear hearing protection while shooting can suffer a severe hearing loss with as little as one shot[.]” Source: ASHA, Recreational Firearm Noise Exposure.
How Much Does a Good Suppressor Really Reduce Firearm Sound Levels?
That depends on the rifle, the cartridge, and the effectiveness of the suppressor. American Hunter explains: “Suppressors retard the speed of propellant gases from the cartridge that rapidly expand and rush out of the barrel. It’s these gases that produce the loud boom that’s heard for miles. A suppressor’s series of internal baffles slows these gases so they are not all released at once, thereby muffling the sound.” Many good commercial suppressors can achieve 30-35 dB sound suppression. However, Zak Smith of Thunder Beast Arms says: “There are a bunch of manufacturers who publish values that are not reproducible, or use an ad-hoc test instead of a mil-spec test. In many cases we’ve tested the exact same suppressors they’ve advertised with 30-40 dB reductions and found they are actually in the high 20s instead.”
Again, for this reason, we recommend that hunters use ear protection, such as electronic muffs, even when shooting suppressed.
Share the post "How Suppressors Are Made — And Suppressor Facts vs. Fiction"
Well folks, today is the first day of August, National Shooting Sports Month (NSSM). To help grow the shooting sports, the National Shooting Sports Foundation (NSSF) asks you to bring a new shooter to the range this month. That’s a good mission — adding to the ranks of shooters is the best way to preserve our Second Amendment rights.
This coast-to-coast celebration spotlights the fun and enjoyment of target shooting. Newcomers can take their first shots, and experienced shooters can invite someone new to the range or help an erstwhile shooter rediscover the fun of target shooting. This month-long event involves all the shooting sports — rifle, pistol, and shotgun.
The NSSF has an online database of NSSM shooting events scheduled for August. In most states you’ll find a large number of August events in the database — matches, clinics, training sessions, special sales — and much more. To see the events in your region, go to the Shooting Events Page and select a state or put a ZIP Code in the search field on the right. The scheduled events will then be listed in a scrolling vertical list in the right column. Here is an example from the state of Texas:
Here’s Your Chance to Win $500 with 2024 #RangeChallenge
Feelin’ Lucky? Then head to the range and shoot a target for a change to win $500.00. Celebrate National Shooting Sports Month and take the #RangeChallenge for a chance to win rewards this month. The NSSF will randomly select 10 winners in August to each receive a $500 gift card!
Enter by either: (1) posting a photo or video of you and your target to Instagram accompanied with the #RangeChallenge hashtag; or (2) Uploading a photo of you and your target directly to the Sweepstakes Page. You can CLICK HERE to download official August 2024 Range Challenge Target.
FREE Downloadable Fun Targets for Shooting Sports Month
On the NSSF Shooter Toolkit Page, you’ll find 17 FREE Downloadable Targets. Shown below are 15 of the targets. Pick the target(s) you want on the Shooter Toolkit Page or Download all 17 FREE Targets.
There are regular bullseyes, as well as Darts, Golf, and more. We really like the Billiards target and kids love the Water Balloons target. You can download all 17 targets for free, and then print them out, ideally with a color printer.
What Shooters Can Do to Promote National Shooting Sports Month:
The NSSF says: “As shooters, you serve a critical role in the continued growth of gun ownership and shooting sports participation. We urge you to join us this August for National Shooting Sports Month.” There are a variety of ways you can help this August:
— Introduce a family member, friend, or group of friends to the shooting sports by taking them to a local range that’s hosting an event.
— Spread the word to family/friends and encourage them to get out to the range in August.
— Encourage the ranges and retailers near you to host an event this August and add them to the official events calendar at www.ShootingSportsMonth.org.
Share the post "Events and Target Contest for National Shooting Sports Month"
With the price of premium scopes approaching $3500.00 (and beyond), it’s more important than ever to provide extra protection for your expensive optics. 
The heavily padded XP-6 Flak Jacket is also offered in a Zippered version, shown at right. This is designed for removable optics that need protection when in storage. The full-length, zippered closure goes on quick-and-easy and provides more complete protection against dust, shock, and moisture. These quality XP-6 scope covers are available on 
Today, .30-06 M1 Garands and classic military rifles will fill the firing lines at Camp Perry. The National John C. Garand, Springfield, Vintage and Modern Military Match (GSMM) concludes today, Sunday, August 4, 2024. (See 
A while back, Sinclair International’s Reloading Press Blog featured a “round-table” discussion of reloading techniques. Sinclair’s team of tech staffers were asked: “What do you feel is the one-most crucial step in precision reloading?”
The Risk of Hearing Loss
