September 24th, 2024

TEN Key Tips for Reloading with Progressive Presses

6.5 Guys Progressive Press video Gavin Gear Ultimate Reloader

Progressive reloading presses offer shooters speed and efficiency in producing custom-tailored rifle and pistol ammunition. However, there is a wide choice of Progressive Presses and a bewildering array of options to consider. In this video, the 6.5 Guys and UltimateReloader.com’s Gavin Gear provide an overview of the leading Progressive Presses on the market along with key considerations for precision rifle shooters. If you are considering getting a Progessive for rifle ammo reloading, you should watch this informative, 25-minute video.

10 Tips for Reloading Rifle Ammo on a Progressive Press:

1. Make sure the brass is very clean. Don’t mix old range pick-up brass with newer brass.

2. Apply a thin, spray lube to all cases before the sizing/loading cycle.

3. Consider priming your brass separately (with a hand or bench tool) before the operation. Then inspect the primers before loading powder and bullets.

4. Always wear eye protection when loading with the Progressive, particularly if you are priming cases.

5. With masking tape, mark the powder measure/dropper with the powder type and cartridge charge weight. Check the charge mass multiple times (see below).

6. Cycle a few cases, sizing and adding powder but NOT seating bullets. Weigh the powder charges to ensure the powder measure is dispensing the correct charge. Sometimes this will change a couple tenths as it “settles down” after the first few charges.

7. Check the brass for shoulder bump and bullet seating depth carefully for the first few rounds, then check again periodically.

8. Try to maintain a steady pace and operate the handle the same way every time.

9. Visually inspect the powder charge in each case (before bullet seating), and use a lock-out die if your Progressive Press has enough stations.

10. Never, ever mix pistol and rifle powders! If you have previously loaded pistol ammo with your Progressive, make sure ALL the powder (every flake and kernel) is removed from all parts of the powder-dropping system before you add rifle powder.

Visit these sites for more Reloading and Precision Shooting Videos:

6.5 Guys
https://www.youtube.com/user/65guys
http://www.65Guys.com

Ultimate Reloader
https://www.youtube.com/ultimatereloader
https://UltimateReloader.com

Similar Posts:

Tags: , , , , , , , ,