Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









January 21st, 2026

SHOT Show 2026 DAY 2 Highlights — New Guns and Optics

SHOT Show 2026 rifle pistol new Venetian expo las vegas nssf

It is now Day Two of SHOT Show 2026 in Las Vegas. There are huge crowds visiting the thousands of display booths in the “miles of aisles” (19 acres to be precise). Over 52,000 people have registered for the event. This year’s SHOT Show encompasses two facilities — the Venetian Expo AND the new Caesars Forum. Combined, these facilities provide over 830,000 net square feet of exhibit space. The two trade show halls are connected by an elevated walking bridge.

SHOT Show 2023 rifle pistol new 2023 Venetian expo las vegas nssf

CLICK HERE for the searchable database of all SHOT Show 2025 exhibitors.

Today, as part of our Day Two coverage of SHOT Show 2026, we feature videos and images of new rifles from Smith & Wesson, CZ, Century Arms and new chassis systems from MDT. Other major makers, including Beretta, Bushmaster, FN, Remington, Rossi, SIG Sauer, and Tikka have many new guns on display at SHOT Show 2026.

Interesting New Products at SHOT Show 2026

Century Arms ATA ALR — Affordable Precision Rifle

SHOT Show 2026 rifle pistol new ata alr prs rifle 6.5 creedmoor las vegas nssf

At SHOT Show, Century Arms showcased the new ATA ALR Tactical Rifle. Chambered in .308 Win or 6.5 Creedmoor, this modular rifle comes complete with adjustable aluminum chassis and muzzle brake. This could be a good starter rifle for PRS/NRL competition that does double duty as a hunting rig. And the ATA ALR is just $1099.99. That’s a great deal — you can pay that much just for an aftermarket chassis system.

Smith & Wesson New Metal-Frame Handguns

Smith & Wesson has many new products coming out in 2026. Many impressive new handguns have been seen at this year’s SHOT Show. This video covers some very impressive S&W handguns that feature aluminum and steel frames. The first pistol is the S&W SPEC VI with aluminum frame, ported barrel, and pre-installed Aimport optic. Next the reviewer covers the impressive steel-framed HD series pistols — both standard and competitor models. With good ergonomics and triggers, these are great for action pistol games.

MDT New Ultra-Light Chassis — Just 3.2 Pounds

In this video MDT Product engineer Josh Botha reviews the new MDT DRT lightweight chassis. This was designed for lighter weight for easier carry in the field by hunters. DRT stands for “Dead Right There” and this models was designed for “precision night hunting”. The chassis bare weight is just 3.2 pounds a significant reduction compared to previous MDT ACC chassis systems.

Ryan Cleckner — New Seekins SIC Multi-Caliber Sniper Rifle

seekins sic sniper rifle ryan cleckner

Ryan Cleckner is a respected gun journalist and former Army Sniper marksman and Sniper Instructor. In this video, at the 1:00-minute mark, Ryan spotlights the innovative Seekins SIC rifle crafted specifically for U.S. Special Operations. This rifle is designed to allow quick and easy barrel/bolt/magazine swaps so you can shoot multiple cartridge types with the same rifle. The Seekins SIC rifle is built to withstand extreme environments while letting the operator rapidly select and swap calibers to meet mission criteria. The $8900.00 Seekins SIC is a “purpose-driven, modular system” — not a chassis retrofitted to accept a barreled action.

New Hunting Rifles — Many Rifles Reviewed

This video reviews multiple hunting rifles, many of which were introduced in the last 12 months. This employs manufacture-supplied video clips, but it’s a good starting point if you’re shopping for a new hunting and/or varmint rifle. The video covers the pros and cons of these hunting rigs. Note, there is considerable annoying commentary in this video, but it does have good footage of the rifles and shows the bolts working and the rifles cycling. In order, the featured rifles are:

0:55 Bergara Platinum Stalker
2:30 Weatherby Mark V Backcountry Capra
2:52 Bergera Premier Cima Pro
5:32 Henry SPD Predator
7:06 Ruger American Rifle Gen II Prairie
8:34 Marlin 1894 Trapper (10mm)
10:15 CZ 600+
11:10 Previous CZ Models
11:45 Weatherby Model 307 Alpine ST
13:28 Smith & Wesson Model 1894 Stealth Hunter
15:06 Christiansen Arms Evoke
16:36 Bergara BMR-X (rimfire)

Handgun Shorts — CZ and Walther

NEW Nightforce NX6 Scope Family for 2026

nightforce nx6 new scope

Nightforce’s new NX6 riflescopes offer lightweight configurations with an impressive 6X magnification range across the series. NX6 options include: NX6 1-6x24mm, 2-12x42mm, 3-18x50mm, 4-24x50mm, and 5-30x56mm. NX6 scopes are designed for wide field of view and good clarity. The FieldSet turret system provides great repeatability and tracking while offering ease of use and configurability, allowing shooters to convert from capped to exposed dials and custom Bullet Drop Compensating (BDC) dials.

SHOT Daily Magazines Feature New Firearms

Want more information on new firearms and gun gear? Then check out SHOT Daily Magazine. Shown below is the digital edition cover for the SHOT Daily Day 1 magazine distributed at SHOT Show. The Day 1 issue features new rifles, shotguns, and pistols (pp. 30-42), and there is a good feature article on suppressors (pp. 64-71). The Day 2 issue should be released later today. Click the Day 1 cover page below to launch the full version which you can read in full for free.

SHOT Daily Shot show 2025 issue 1 one

SHOT Show 2026 rifle pistol new 2025 Venetian expo las vegas nssf

SHOT Show 2026 rifle pistol new 2025 Venetian expo las vegas nssf

New Product Center

The New Product Center is a “must-see” offering at the Venetian EXPO. There are dozens of interesting and innovative new products all in one convenient location. On display were rifles, pistols, optics, electronics, gunsmithing tools, holsters, and dozens of other products.

SHOT Show 2023 rifle pistol new 2023 Venetian expo las vegas nssf
SHOT Show 2023 rifle pistol new 2023 Venetian expo las vegas nssf

Permalink - Videos, Gear Review, New Product, News, Optics No Comments »
January 21st, 2026

Cheap Tricks — Ten Great Low-Cost Items for Reloaders

Budget reloading items

Useful reloading gear does not have to be costly. Here are ten handy (and very inexpensive) items that belong on your loading bench or in your range kit.

magnifying glassMagnifying Glass – We use a flat, 2″x2″ pocket 4x-8x magnifier. This folds up on itself. Very handy, we use it to inspect bullets and brass. Use this to check your flash holes for burrs, and check the meplats of your bullets before loading.

Clear 35mm Film Cannister – Use this to transfer the thrown powder charge to the little measuring cup that sits on your scale. That way you don’t get any kernel splash. Also if the charge weight is obviously off, it’s easy to dump back in the measure. A film canister works pretty well as a trickler too.

Compressed Air in a Can -- Get these at office supply stores. Use the can (with tube attached) to blow crud out of cases after cleaning the neck with a brush, and blast loose debris out of primer pockets.

Pin Vise – A simple pin vise with a #53 bit is perfect for deburring small PPC and BR flash holes without reaming the flash-holes any larger. The Lapua PPC/BR flash-hole diameter is 1.5 mm, or 0.059″. Amazon.com sells a handy $8.29 pin vise kit with 10 bits, including the ideal 1.5mm bit. Other vendors offer a #53 pin vise bit that measures .0595″ or .060″ (depending or source). You can find pin vises and bits at hobby stores — here’s an example below with ten bits including 1.5mm. Pin vise sets can be found from $7 to $15.

pin vise 1.5mm Lapua Flash hole

Bounce Dryer Sheets – The common dryer sheets eliminate “static cling” on your plastic reloading parts such as powder measure cylinders, powder funnels, and reloading press plastic bins. Thanks to Doc76251 for this tip.

BallistolBallistol Aerosol – Try using this versatile lubricant/solvent for full-length sizing. Spray some on a patch and you can wipe the carbon off your case necks. Then, continue to apply a very small amount of Ballistol on the case bodies — just thin sheen is all you need. Ballistol is super slippery, and easy to remove. For general full-length sizing (on small cases) it works great and doesn’t leave a gooey, waxy, or chalky residue. For heavier case-forming jobs, we recommend Imperial Die Wax.

Shotgun Mop – Stick this in the chamber when using Wipe-Out foaming bore cleaner. This will seal off the chamber so the foam doesn’t flow into your action. For long chambers screw on one section of cleaning rod to aid extraction.

Colored Sharpie Marking Pens – Mark your bullets ahead of the bearing surface, and the color transfers to the target. This way you can shoot multiple loads at the same point of aim and discern which load shoots the tightest. (Recommended for 300 yards and beyond). With colored bullet tips you can test multiple loads “round robin” to equalize wind effects. When testing seating depths for example, you can mark the longer-seated set of bullets red and the shorter-seated set green and shoot them during the same sequence. Just look at the colored marks on the target to see which grouped better.

Sharpies Pens

Thin Latex Gloves – You should keep a box of inexpensive, disposable latex gloves (the kind doctors use) in your loading room. These will prevent contamination of primers or powder kernels that you handle directly. Also, use the gloves when handling fine blued tools or firearms to prevent transfering body oils and salts that promote rust.

Plastic Washers for Neck Mic – If you use a Sinclair Neck-wall Micrometer Gauge with integral stand, you can use thin plastic washers to adjust the height of the case on the mandrel. This makes it much easier to measure the same point on the case neck every time. Thanks to MikeCR for this tip (and photo).

plastic washers neck micrometer

Permalink - Articles, Gear Review, Hot Deals No Comments »
January 21st, 2026

Craft Your Own Target Stand with FREE Set of Plans

Some years ago, the folks at TargetWorkz published a a handy set of plans for a 48-inch tall self-supporting target stand. This makes a great do-it-yourself project. To create a sturdy, self-supporting target frame, all you need are some 2x4s, 1x2x48 furring strips, plus fasteners. The target holder, which supports an 18×24 inch cardboard target backer, separates from the base for easy transport.

Note: There is no cross-piece shown in the plan, but we do recommend putting wood crosspieces at the top of the target stand and about 18″ up from the bottom. This will make the frame more rigid, and will allow the frame to work even if the cardboard is badly “shot up”. Use a T-square to set the crosspieces before attaching them with screws.

CLICK HERE to Download TARGET FRAME PLANS »

Alternative Target Stand May from ABS or PVC Pipe
If you like this kind of project, but want to build a frame that is taller, yet can break down into sections, we also have an article showing you how to build a nice frame with inexpensive ABS or PVC tubing. VIEW ABS/PVC Tubing Target Frame Plans.

PVC ABS Target Stand

Permalink Gear Review, Tech Tip No Comments »