BoreSmith Patents Triangular Patches and Dual-Diameter Brushes
The U.S. Patent Office has awarded BoreSmith utility patents for two unique gun cleaning products. Patents were issued for BoreSmith’s triangular Pyramid Patch™ as well as BoreSmith’s dual-diameter JagBrush™. Both products were designed by Shane Smith, a mathematician/physicist who used his scientific and firearms knowledge to create innovative bore-cleaning products that may well work better than conventional patches and brushes.
BoreSmith’s clever Triangle Patch™ (aka Pyramid Patch) presents more cleaning surface area to the bore wall than does a conventional square or round patch (of equivalent size). At the same time, the unique geometry makes Triangle Patches much less likely to jam in the barrel. This is because the notches in the sides of the triangle allow the patch to sit more uniformly on the jag (without bunching up). The Triangle patch can be used with a standard jag but works best when paired with BoreSmith’s patented dual-diameter JagBrush. Order Triangle Patches HERE.
Triangle Patch Function and Geometry Explained (See 1:18 time-mark):
NOTE: Despite what you may see in this video, you should insert brushes and patches from the chamber end first, using a well-fitting cleaning rod bore guide. With bolt-action rifles, NEVER insert a cleaning rod (with brush or jag) in through the muzzle. This may damage the delicate crown of your barrel.
Patent Awarded to Dual-Diameter JagBrush
The JagBrush is like a standard bore brush but has two different diameters on the bristle section. Bristles in the front are smaller, while the rear bristles are similar length to a standard bore brush. When a patch is pushed through the bore using a JagBrush, the smaller bristles will grab the patch, leaving the longer bristles exposed and creating a dual-action wiping + brushing system. JagBrushes are offered in a wide variety of calibers, in both bronze and nylon versions.
Shane Smith, CEO of BoreSmith, was pleased that his designs have been awarded two important patents: “I created these tools to allow the user to get their firearms cleaner, faster, and without causing unnecessary damage in the process. At BoreSmith, we strive to develop and produce superior cleaning tools that help firearm owners protect their investments.” For more info, visit BoreSmith at RigelProducts.com.
Similar Posts:
- Clean Better with Triangle Patches and Dual-Diameter Brushes
- Patented Triangle Cleaning Patches Plus Dual-Diameter Brushes
- Triangle Patches Offer Barrel Cleaning Benefits
- Triangle Patches — Patented Design for More Efficient Cleaning
- Triangle Cleaning Patch — Innovation That Works
Share the post "BoreSmith Patents Triangular Patches and Dual-Diameter Brushes"
Tags: Barrel, bore, Bronze Brush, Cleaning, Jag, Patches, Patent, Trademark
This should make it easier to get the right fit.
Um….o.k. I guess. The way I do may patches and the jag tips I use I get a uniform patch diameter and it keeps the tip of my rod centered going down the bore. Patch doesn’t bunch up etc.. On my .30cal. the surface area of my patch is around 2″ long. I don’t see an advantage to the triangle patch. Just my opinion.
Later, Frank
Bartlein Barrels
Frank:
Please share your approach – in detail. Please also post some pics on one of the AccurateShooter forums, replying here with which forum you used.
Thanks.
Go to the home page of our website and click on cleaning.
I use a Parker Hale jag. Cut your patch to length accordingly. Roll the patch like you roll a cigarette. Give it a twist with your fingers. Start it into the bore guide and add your solvent.
If your cleaning rod is flexing to much or the patch is squealing going down the bore your patch is to tight.
http://bartleinbarrels.com/BreakInCleaning.htm
Thanks Frank. As you describe is as I do. I suspect I learned that from your site. Thanks again.
Thanks Frank. As you describe is as I do. I suspect I learned that from your site. In fact I only use P-H jags. Thanks again.
Frank,
Your opinion is very highly regarded, as it should be. There is no question that you guys produce one of the top barrels on the market. I’d like you to give me the opportunity to change your mind about the benefits of a Triangle Patch and send you some of our cleaning gear to try yourself. Are you up for it?
Hello Eric! Sure we would be up to trying it out. Always looking for better ways etc..
On the brushes….for the most part not a guy here uses a bore brush. I myself haven’t used on since the late 80’s or so. The only time I use a brush is once in a while it’s on .22rf guns and only nylon brushes.
Later, Frank
Bartlein Barrels
Frank,
Thanks! We will be sending you guys a package with product to try. Enjoy the holidays and maybe ill come bug you at SHOT this year!
Will be at Shot Show but no booth. Will be walking around. To many customers to go visit. Only there Tues and Wed.
Later, Frank