Ruger has created a helpful set of online resources for new Firearm owners. The New Firearm Owner Resources site features a Fundamentals of Firearms Ownership Video Series, Industry Resources for local “hands-on” training, as well as information on safe storage. In addition, this online Resource Center offers a full library of product instruction manuals along with suggestions for recommended safety equipment.
There will be new video releases each week, hosted by Mark Gurney, Ruger Director of Product Management. These short (2 min. on average) videos provide key information for new gun owners. If you have friends or family members who are new gun owners, they should watch ALL these videos.
Introduction for New Firearms Owners
Safety Rules — The FOUR Fundamental Safety Rules
Range Safety Equipment — What You Need
This video reviews essential Eye and Ear Protection for shooters.
Precision Rifle Challenge on Shooting USA This Week
This week, Shooting USA TV features a show that should interest PRS/NRL fans, tactical marksmen, and long range hunters. Run in Utah’s backcountry, the Hornady Precision Rifle Challenge is a unique long range competition with serious wind and elevation changes. This isn’t a typical PRS Pro Series match by any means. Participants in this challenging Precision Rifle match encounter tough conditions not typically seen in other tactical matches. The match runs in summer in Utah, just across the state line from Evanston, Wyoming. Watch the show 11/18/20 on the Outdoor Channel.
This video is great — lots of equipment closeups, stage set-ups, plus drone footage of range.
At this year’s match, held July 10-11, 2020, Clay Blackketter took first place overall, Doug Koenig won the Production Division, and Travis Gibson won the Tactical Division using a .308 Win. All three men are members of Team Hornady. This was a big match with 177 competitors at Hornady’s private 250,000 acre ranch property outside of Evanston, Wyoming.
Shooting USA will air Wednesday, November 18, 2020, at 9:00 PM Eastern (8:00 PM Central) on the Outdoor Channel. If you miss that, it runs again on Thursday afternoon. Look for Shooting USA on the Outdoor Channel. In addition, you can watch all episodes of Shooting USA on the VIMEO channel by subscription. Each episode is just $0.99, about 1/10th what a movie ticket costs these days.
Browning M2 Heavy Machine Gun — History’s Guns
In addition to the Precision Rifle challenge, this week’s Shooting USA episode also showcases the Browning M2 .50 Caliber Heavy Machine Gun. The .50 Cal M2 machine gun was designed by John Moses Browning and went into military service in 1933. Its design is similar to Browning’s earlier M1919 Browning machine gun, which was chambered for the .30-06 cartridge. The M2 uses the much larger and more powerful .50 BMG cartridge, which derives its name from the gun (BMG stands for “Browning Machine Gun”). It has been referred to as “Ma Deuce”, in reference to its M2 nomenclature.
With a half-inch diameter bullet weighing 750 grains, the .50 BMG cartridge is effective beyond a mile in attacking light armored vehicles. And the M2 Browning has served for nearly a century, in the skies, on the ground, and at sea. Updated versions of the Ma Deuce are still being produced and deployed today.
We first ran this article in 2012, and it was very well received. Since then, many Forum members have requested an explanation of MILS and mildots, so we decided to run this feature again…
In this NSSF Video, Ryan Cleckner, a former Sniper Instructor for the 1st Ranger Battalion, defines the term “MilliRadian” (Milrad) and explains how you can use a mildot-type scope to range the distance to your target. It’s pretty simple, once you understand the angular subtension for the reticle stadia dots/lines. Cleckner also explains how you can use the milrad-based reticle markings in your scope for elevation hold-overs and windage hold-offs.
Even if you normally shoot at known distances, the hold-off capability of milrad-reticle scopes can help you shoot more accurately in rapidly-changing wind conditions. And, when you must engage multiple targets quickly, you can use the reticle’s mil markings to move quickly from one target distance to another without having to spin your elevation turrets up and down.
WEB RESOURCES: If you want to learn more about using Milliradians and Mildot scopes, we suggest the excellent Mil-dot.com User Guide. This covers the basics you need to know, with clear illustrations. Also informative is The Truth about Mil Dots by Michael Haugen. Mr. Haugen begins with basic definitions: 1 radian = 2 PI; 1 Milliradian (Milrad or ‘Mil’) = 1/1000th of a radian; 1 Milliradian = .0573 degrees.
Earlier this year, CZ introduced a new .22 LR rifle for shooters looking for a PRS/NRL rimfire cross-trainer or a bolt gun for NRL22 competition. This new CZ 457 Long Range Precision (LRP) model features a 20″ fluted barrel with factory-installed muzzle brake. The stock adjusts for length-of-pull and has an adjustable cheekpiece. On top of the action is a +25 MOA Weaver-type rail so you have enough elevation to shoot out to 300 yards and beyond with most scopes. The single-stage trigger is also adjustable. MSRP is over $1200.00 but this rifle is now available for $899.99 at KYGunCo.com.
CZ factory video shows features of CZ 457 LRP:
The LRP’s target stock boast textured grip surfaces and a near-vertical pistol grip. The rear has a “hook” for positions where the shooter will use his non-shooting “off” hand to steady the rear of the rifle when the front is on a bag or support. The rear rail allows quick installation of monopod or bag-rider. There is a very fat, oversized bolt knob. A five-round magazine is standard with 10-rounders availalble.
The height of both the comb (cheekpiece) and buttpad are adjustable. Also the length-of-pull can be adjusted with the four included spacers (351-382 mm).
Trigger: Adjustable
Cheekpiece: Adjustable for Height
Buttpad: Adjustable for Height
LOP: Adjustable with Spacers
Stock: Beech with Soft-touch Finish
Muzzle Brake: Standard
Click Image to see full-screen photo of CZ 457 LRP
Rifleshooter.com built this tactical rifle (top image) with a Howa 1500 action, Shilen barrel, and MDT chassis. Below is a factory Howa 1500 Multi-Cam rifle.
Many of our readers are thinking of purchasing a Howa rifle or barreled action. These feature smooth-running actions with a good two-stage HACT trigger. But some folks have heard that it may be difficult to find stocks, or to fit an after-market barrel. That’s not true. There are many stock options available, and in this article, Bill of RifleShooter.com shows that it is easy to remove the factory-installed barrel with the right tools. We think a Howa makes a fine basis for a varmint rig or field rifle. Or you can build a tactical rifle as Bill did. You can start with the factory barrel and when you want/need more accuracy, then have a gunsmith install a custom barrel from Krieger, Shilen, or other quality brand.
What You Need to Know About Howa 1500-series Rifles
Tech Feature by RifleShooter.com
Consider this article the “Howa 1500 Overview”. AccurateShooter.com’s editor mentioned there’s been a lot of interest in Howa rifles and barreled actions imported by Legacy Sports International. In addition to being able to buy a complete rifle from a dealer, Brownells sells barreled actions in a wide variety of calibers and configurations. In this post we are going to take a look at the Howa 1500 series.
Howa Rifles — General Background
Howa is a Japanese heavy machinery company. One of its product lines are firearms, which, are imported into the United States of America by two different companies, Legacy Sports International and Weatherby. Legacy sells the 1500 under the manufacturers name while Weatherby re-brands the guns as the Weatherby Vanguard. In general, the finishes on the Weatherby rifles are more refined than the LSI-imported 1500s.
General Evaluation of Howa 1500 Rifles
I’ve found Howa 1500s to be solid, entry-level rifles that are capable of sub-MOA accuracy out of the box. I’ve actually purchased two Howa rifles I’ve tested because I like them so much. The gun below, a Howa Mini-Action in 7.62×39 Russian, is one of my favorite factory guns to shoot. I’m running a Tract Optics Toric on it, these are solid little rifle scopes that offer great performance for the money.
Check out this three-shot group I drilled at 100 yards with the rifle above and 125-grain Sierras. It took a lot of work and load development to get there, but when it did, it worked well.
Howa 1500 HACT 2-Stage Trigger
Howa 1500s feature the very nice Howa HACT trigger. This is an adjustable, two-stage trigger, set for about 3 pounds (combined stages). Crisp and repeatable, this is an excellent trigger for a factory gun. There is no annoying Glock-style safety lever in the middle of the trigger blade. The 2-stage design and pull weight range works well for a hunting rifle or a rig for PRS competition. Rifleshooter.com says the Howa trigger is “one of the best factory triggers, along with Tikka. I’ve found the Howa trigger superior to a Remington 700 — the Howas doesn’t need to be replaced.”
Writing for the Western Outdoor News, WONews.com, Steve Comus has field-tested the new HACT Trigger. Steve writes: “I always liked two-stage triggers, because of the way I could take-up the slack and then actually know when the rifle was going to go off. The take-up on the [HACT] trigger was fast and easy. The crisp, positive release when pressure was put on during the second stage [reminded me] of some of the target rifles I shot through the years.”
Howa Actions — Three Options
Howa offers three action lengths: Mini, Short, and Long. You can see the bolts for the three action lengths in the image below. The Mini-Action has similar external dimensions to the Remington Model Seven, however, the Mini-Action’s bolt does not travel as far to the rear. This is a mixed bag. The upside is you have a quicker action (shorter bolt throw). The downside is you are limited to shorter rounds such as the .223 Remington, 7.62×39mm Russian, and 6.5 Grendel. But if you need a bigger cartridge, just choose the standard or long action Howa variant.
Howa 1500 vs. Remington 700 — Important Differences
Is the Howa 1500 a Remington 700 clone, or some kind of improved Remington 700? No, not really. While the top radius of the Howa 1500 does match the Model 700, and they can both use the same two-piece scope bases, there are a number of differences.
If you look at the Howa 1500 alongside the Remington 700 you’ll note the M700 is a round action, while the Howa is a flat-bottom action. In many ways the Howa’s bottom half reminds me of a push-feed Winchester. This means the chassis and stocks that support a Howa 1500 are not V-block based like you’ll find on a 700, instead they have a flat bottom. While the bolt of the Howa is similar in external appearance to the Model 700, it does offer some improvements, notably an M16-style extractor and a firing pin assembly that can be easily removed without tools.
Howa 1500 action screws are metric and are in a different location from the 700. The Howa 1500 has an integral recoil lug that accepts the front action screw, this means you have more of the front action screw engaging the action. WARNING: If you install it into a poorly-fitted stock or action you may bind it.
Can a Howa Action Be Used for a Custom Rifle Project?
Absolutely! You can either buy a barreled action from Brownells and throw it in a chassis system/stock of your choice or you can use a stripped action to build a custom rifle. If you are in the chassis market, MDT offers a wide variety of chassis in different price ranges. All have worked well for me.
How to Remove Howa Factory Barrel from Action
You may have heard internet grumblings about removing Howa barrels. Some keyboard commandos say they are extremely difficult to remove without a relief cut. Well Bill at Rifleshooter.com demonstrates that Howa barrels can be removed without trouble, provided you have the right tools. Watch this video:
Watch Howa Barrel Removal Video — Quick and Easy (Click Speaker Icon for Audio)
Q: Is it difficult to remove a barrel from a Howa 1500?
A: Not very. I’ve heard from some smiths that worked on Howas (years ago) that the factory barrels are difficult to remove. However of the half dozen or so Howa barrels that I’ve pulled, they’ve been very easy. I use a Brownells action wrench with the top piece for a Rem Model 700 and the flat bottom resting against the flat on the wrench.
Howa Actions Require Metric Barrel Threads
It’s easy to thread a barrel for a Howa Action. You just have to cut metric threads — most lathes out there can cut them. I cut the threads below on a manual lathe using change gears. [Editor: John Whidden cuts metric tenon threads with a CNC lathe. “It’s easy,” John tells us, “No issue whatsoever.”]
Ruger Super GP100 Revolver in 9mm Luger (9x19mm)
Wouldn’t it be cool if you could shoot your 9mm semi-auto pistol ammo in an ultra-accurate revolver? Well you can. Ruger adapted its existing Super Redhawk frame to create the Super GP100 9mm Luger (9x19mm) revolver. As you can see, the Super GP100 9mm features a stubby 8-round PVD-coated cylinder to better fit the 9x19mm round. According to Guns.com the 9mm GP100 “uses a cylinder and extractor cut for moon clips to speed up reloading [and] sports a 6-inch half-lug sleeved and shrouded barrel with an 11-degree target crown[.]”
Watch this GunBlast video review to see how this unique Ruger 9x19mm wheelgun performs. Reviewer Boge Quinn said this a “competition grade gun” with nice fit and finish. Out of the box the Super GP100 9mm had a 9.5-lb double-action pull and a 4.5-lb single action trigger pull. It took a while for the pull to smooth out Quinn noted. Also, he said that if you do NOT use the supplied moon-clips it is awkward to remove the spent cartridges: “You don’t have to use a moon clip, but I don’t know why you wouldn’t… it just works great that way.”
The 9×19mm Parabellum (aka 9mm Luger) cartridge was introduced in 1902 by German weapons manufacturer Deutsche Waffen und Munitionsfabriken (DWM) for the Luger semi-auto pistol. Now 118 years later, Ruger brings us a sturdy, 6″-barrel revolver for this popular cartridge. Ruger adapted its existing Super Redhawk frame for this Super GP100 9mm revolver. In this video, Ruger engineer Mark Gurney explains the features of the Super GP100 9mm revolver:
Super GP100 9x19mm Features
1. Triple-locking cylinder locked into the frame at front, rear and bottom for more positive alignment and dependable operation.
2. High-strength stainless steel cylinder is fluted and shortened to reduce overall mass and increase rotational speed. Cylinder has PVD finish for durability and ease of extraction.
3. Polished and optimized internals, a centering boss on the trigger, and centering shims on hammer deliver a smooth double-action trigger pull with crisp/consistent let-off.
4. Cylinder and extractor are cut for moon clips to speed reloading during intense competition. Ships with three full moon clips and moon clip tool. The ejector and chamber mouths have a light chamfer to aid loading with moon clips.
5. Hogue hardwood grip is hand-finished for a smooth, polished feel. Grip frame accommodates a wide variety of custom grips.
6. Transfer bar mechanism provides security against accidental discharge.
7. Cold hammer-forged barrel has precise rifling for accuracy and longevity.
8. Barrel features 11° target crown for competitive-level accuracy.
Superb Accuracy with Criterion Pre-Fit Barrel and Creedmoor Sports Ammo
Check out that 0.188″ group. Can you believe that was shot with factory .308 Win ammo? A while back our friends at Criterion Barrels tested some .308 ammo from Creedmoor Sports. This was loaded with Lapua’s 175gr Scenar HPBT bullet in Lapua brass. The results speak for themselves. Any time factory ammo can shoot inside quarter-MOA, that’s impressive. This ammo was used in a “Rem/Age” project rifle. That term refers to a Remington action rifle that has been re-barreled with a pre-fitCriterion barrel. The new barrel is secured with a Savage-style barrel nut. Hence the term “Rem/Age” or “Rem-Age”.
Criterion posted: “I think we may have a new favorite factory match load for the nitrided Rem/Age build.” Another reader added: “[Creedmoor’s] 175 Scenar .308 ammunition is top notch.” FYI, this group was shot on our load development target, which you can download for free from our Targets Page.
Why do Criterion barrels shoot so well? One reason is that Criterion’s barrel steel is carefully stress-relieved. In the photo below, Criterion Rack 1A (aka the “Coffin”) has been loaded with barrel blanks — made ready for the stress-relieving process.
Working with Pre-Fit Barrels
While they may require the purchase of some additional tools and a bit of a learning curve to install, using Rem/Age pre-fit barrels offer advantages over gunsmith chambering and barrel-fitting. In this video, 8541 Tactical explains how to install a Criterion 6.5 Creedmoor “pre-fit” barrel. You save money and time — you don’t have to wait for a gunsmith to chamber the barrel. While Criterion recommends that a competent gunsmith oversee the pre-fit installation, if you understand the use of go/no-go gauges and you have a barrel vise and action wrench set up to remove the original barrel, putting on a pre-fit barrel CAN be a DIY project. You don’t have to pack up your rifle to ship it off to a smith.
Top rifle competitors use the AutoTrickler system because it offers a superior combination of speed and precision in dispensing powder loads. With an AutoTrickler fitted to a compatible lab-grade magnetic force restoration scale, you can achieve single-grain weight consistency with your hand-loads. That kind of load weight uniformity does help deliver low ES/SD that translates to reduced vertical at long range. Adam MacDonald’s AutoTrickler system is so good that it can truly be called a “game-changer” in the precision handloading world.
As good as the AutoTrickler may be, there are some simple ways to keep it functioning better, or to improve your productivity. Here are three videos by F-Class John that provide very helpful tips for AutoTrickler owners. The first video shows general set-up and installation. The second video shows a simple but brilliant trick to speed up the process — use two identical powder measure cups shaved to be the EXACT same weight. In third video, F-Class John shows important maintenance tips to keep your AutoTrickler components running smoothly and quietly.
AutoTrickler V3 — General Set-Up and Operational Advice
In this video, John offers some general advice for setting-up the AutoTrickler system. He explains how you can get the machine optimized. For example he notes that you want to set the initial drop weight (from the powder measure) in an optimal range: “When you set the original drop you need it to be about 1 to 1.5 grains below. Some people set it too close to the final weight they want and it actually doesn’t let the trickler unit work as efficiently, consistently and accurately as it will if you start 1 to 1.5 grains low.”
John also explains how to hook up the cords and how to position the trickler unit. John places his AutoTrickler on a 30-lb piece of granite, with a thin polymer “anti-static” pad on top. John also uses a line conditioner and grounding wire to provide the best electrical flow to the scale and trickler. Interestingly, the granite was an inexpensive “surplus” piece taken from a kitchen top installation.
John also shows how the angle of the trickler unit can be adjusted. Another smart tip involves marking the white trickler tube belt bushing. That makes it is easier to discern slow movement and determine when the trickler is completely stopped.
If you own an AutoTrickler or plan to purchase one, we definitely recommend you watch this entire video.
Are you experience chattering when powder is dispensed? John also explains (3:20 – 5:30 time mark) how to replace a small rubber “wiper” part in the dispenser unit. This can help prevent chattering or kernel-cutting as the powder charge drops into the pan from above.
Use Two Identical-Weight Powder Cups to Load Faster
In this second video, F-Class John shows how you can use TWO identical powder cups to speed up your reloading. This is a VERY clever and relatively inexpensive upgrade. You can use 600-grit wet sandpaper to make the weight of the twin cups absolutely identical. John says: “I just lightly sanded the bottom of these until they both weighed exactly the same on my scale.” He can now use one cup to load a case while the other cup is receiving the next powder charge.
AutoTrickler V3 General Maintenance Tips
If you have been running an AutoTrickler for quite some time, you have probably noticed some noise or vibration. This video shows some very simple maintenance procedures that will have your AutoTrickler running great again. F-Class John reveals some components that can get dirty or worn after considerable use. The video identifies the items that may require a cleaning or adjusting. In the video John shows how to do those tasks quickly and easily.
In the last three minutes of the above video John shows an important process involving the trickler unit motor. The motor’s attachment screws tend to loosen slightly over time. After removing the pulley drive wheel, you want to gently tension the four Phillips screws. Then reattach the wheel and drive belt. Doing this simple process should reduce unwanted vibration.
A good, quick-access safe can keep your handgun secure, but also readily accessible. There many factors to consider when buying a small, rapid-access pistol safe: reliability, locking mechanism type, case metal strength/thickness, need for battery, ease of installation, internal capacity, built-in lighting, attack resistance, and overall quality. If you are considering getting a small safe for handguns, we recommend you watch all three videos below. Each shares some valuable observations, and it’s good to have three different reviewers covering wide selection of pistol safes with many different features.
Seven Quick-Access Handgun Safes Reviewed by Lucky Gunner
Not all small handgun safes are created equal. In this 11-minute video, Lucky Gunner reviewer Chris talks about what to look for in a small pistol safe, setting out the pros and cons of the seven safes with which he has done “hands on” testing.
Fort Knox Original Pistol Box
Fort Knox handgun safes feature 10-gauge Uni-body construction and reliable Simplex mechanical locking mechanism. Low-tech but reliable. The vertical lid FTK-PB Pistol Box is $257.00 at Amazon.
V-Line Hide-Away Two-gun Pistol Safe
The V-Line safe with Simplex mechanical lock and slide-out drawer holds two handguns. Sold with mounting bracket, this is designed for under-tabletop or under-shelf installation. It is $272.76 on Amazon.
ShotLock Handgun 200M Solo-Vault
Shotlock’s 200M safe with slide-out drawer, reliable mechanical lock, and mounting plate costs $165.75 on Amazon. Also available is an electronic version for $134.99 on Amazon.
Vaultek VT20i Biometric Pistol Safe
This is a modern two-handgun safe with electronic lock and Biometric (fingerprint scan) instant-access system. Crafted of 16-gauge steel, the VT20i has a rechargeable Lithium-Ion battery. $269.99 on Amazon.
Hornady RAPiD Safe 2600KP
The Hornady RAPiD 2600KP safe offers very fast RFID access for a modest $151.86 on Amazon. This small safe meets TSA requirements for handgun storage in checked luggage. Good choice for travel.
Stack-On PDS-1500 Drawer Safe
This is a basic safe with electronic locking mechanism. Just 4.5″ high, it can store in a drawer easily. Good value at $97.93 on Amazon.
GunVault MicroVault XL
A top-seller for many years, the Gunvault Microvault XL is offered in standard ($169.99) and Biometric MVB1000 versions. There have been some negative reviews of the $299.99 biometric version.
Smart Advice for Handgun Safes from AccurateShooter
With any small pistol safe, there are some important points to remember.
1. Keep the safe out of plain view — Don’t place it on top of a bedside table. Burglars often go straight to the bedroom looking for valuables. We recommend attaching your pistol safe to a secure surface using bolts. Or use a steel cable.
2. With electronic handgun safes, you should change/charge the batteries regularly. It is pointless to have a self-defense pistol in a safe you can’t open because the battery is dead. Electronic safes should always have back-up key-locks.
3. Don’t put important valuables such as car keys, credit cards, and jewelry in compact pistol safes. Even when screwed down, these small safes are known targets for thieves.
4. Remember the KISS principle. Some of the latest pistol safes are WiFi enabled so they can talk to a smart-phone APP. This may provide entertainment for tech types, but simpler may be better. You want a safe that will open/close without WiFi and without a battery.
Ten Handgun Safes Reviewed by Survival Gear
This video is titled “TOP 10 Best Gun Safe”, but it should be more accurately titled “10 Pistol Safes”. None of these safes will hold a long-gun, and most will hold just two handguns. The largest safe reviewed, the Vaultek MX high-capacity, will hold six pistols on the lower level, and a couple more on the upper, internal shelf. This is a well-made, professionally-produced video that shows “hands-on” operation of 10 safes.
SentrySafe QAP1E Handgun Safe with digital keypad. Top-opening gas-strut supported lid. Circular key override. Single pistol safe $107.11 on Amazon. Larger model with 2-gun capacity and interior light $169.99 on Amazon.
GunBox 2.0 “Smart” Motion Sensor Gun Safe. Modern exterior design. Safe has audible motion alarm that sounds if moved. $299.99 from Gunbox.com.
Titan Pistol Vault Safe with mechanical, push-button lock, 14-gauge steel with mounting brackets for vehicle or home installation. $379.00 on Amazon.
Vaultek VT10i Biometric Smart Pistol Safe with Auto-Open Lid and Rechargeable Battery and backlit keypad, $244.99 on Amazon.
Verifi Smart.Safe. Worth a look if you want a Biometric pistol safe. This has the largest and only FBI-certified fingerprint sensor. There is back-up key access, but no keypad. User reviews are good so far. $329.99 on Amazon.
BILLCONCH Biometric Gun Safe. This offers four access modes: keypad, biometric, phone App, and keyed entry. User reviews have been good. If you want a biometric safe on a budget, this is a logical choice for just $139.99 on Amazon.
Vaultek MX WiFi High Capacity Smart Handgun Safe. Auto-open Door and rechargeable battery. This 15″x 11.5″x 11.6″ safe can hold up to 8 handguns on two levels. Available as Biometric ($559.99 on Amazon or non-Biometric $489.99 on Amazon.
Liberty HDX-250 Smart Vault Biometric handgun safe. We like the large Liberty gunsafes and this is a new Biometric safe that holds up to 15 fingerprint codes. $219.99 on Amazon.
Handgun Safes for Bedside at Home — Pew Pew Tactical Reviews
A rapid-access bedside safe is a great way to keep your pistol secure, but also readily available, close at hand. Not all rapid-access pistol safes are created equal, however. In this video, John of Pew Pew Tactical explains what to look for in a small pistol safe, and points out the pros and cons of the four safes tested:
Fort Knox FTK-PB Simplex Pistol Box
Strong case, reliable no-battery locking system. Very good safe, but expensive ($257.00 on Amazon).
Vaultek Electronic Pistol Safes
Multiple styles, thin profile, 5-button electronic ($139.99 on Amazon), or Biometric VT10i + 5-button ($244.99 on Amazon), both with rechargeable batteries.
GunVault SpeedVault Handgun Safe
Designed for vertical mount under desk on vehicle, One gun only, requires batteries, $121.00 on Amazon
GunVault NanoVault Handgun Safe
Small, thin, lightweight — designed for travel or vehicle use. Simple combination lock. Not recommended for home. $56.38 on Amazon.
You can spend thousands on a rifle, but that expensive hardware won’t perform at its best if you have poor trigger technique. One key element of precision shooting is trigger control. Our friend Kirsten Joy Weiss has produced a good video that shows how to refine your trigger technique for better accuracy. In this video, Kirsten talks about the actual placement of a shooter’s index finger on the trigger. It is important to have the finger positioned optimally. Otherwise you can pull the shot slightly left or slightly right.
Kirsten tells us: “Finger placement on the trigger might not seem like a big deal, but it actually is. The reason for this is because, depending on where your index finger is placed on the trigger, [this] translates to different muscle interactions with the gun.” Watch this video to see Kirsten demonstrate proper finger placement (and explain problems caused by improper finger positioning).
When you pull the trigger, you only want to engage the last section of your finger, in order to avoid unwanted muscle engagement and to achieve a smooth shot. Remember there is a “sweet spot” between the crease (first joint) and the tip of the finger. If you position the trigger in that “sweet spot”, you should see an increase in your accuracy. Don’t make the mistake of putting the trigger in the crease of your finger, as shown below.
Effects of Incorrect Finger Placements
You want to place the trigger shoe between the end of your finger and the first joint. If you place the trigger on the very tip of you finger you’ll tend to push the rear of the rifle to the left when engaging the trigger, causing shots to go right (for a right-handed shooter). On the other hand, if you put the trigger in the crease (first joint), you’ll tend to bring the rear of the rifle to the right, causing shots to fall left. This is illustrated below for a right-handed shooter.
In this NSSF Video, Ryan Cleckner, a former Sniper Instructor for the 1st Ranger Battalion, defines the term “MilliRadian” (Milrad) and explains how you can use a mildot-type scope to range the distance to your target. It’s pretty simple, once you understand the angular subtension for the reticle stadia dots/lines. Cleckner also explains how you can use the milrad-based reticle markings in your scope for elevation hold-overs and windage hold-offs.
Howa 1500 HACT 2-Stage Trigger
