Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









September 9th, 2024

Shooting at Indoor Ranges — Tips for Proper Range Procedures

Safety Video NSSF Indoor Range Etiquette

Shooting indoors is fun, and at many indoor ranges you can shoot in the evening after work. But when shooting indoors you should always be extra careful. Follow all key gun safety practices and adhere to proper range “Etiquette”. We also recommend double hearing protection — plugs under muffs.

The NSSF (NSSF) offers a useful Range Safety and Etiquette video. This 8.5-minute video explains safe practices, especially at indoor ranges. In the video, the moderator list the basic rules of gun safety, before covering key range etiquette topics such as range officer commands, how to uncase your firearm on the range when you first arrive, and what to do if a firearm is accidentally dropped. There are also safety tips specific to handling both semi-automatic handguns and revolvers.

Safety Video NSSF Indoor Range Etiquette

BAD RANGE BEHAVIOR — Five Things NOT to Do at the Range

Here are the five worst behaviors we’ve seen at indoor ranges. These behaviors are both dangerous and inconsiderate. Any one of these behaviors can get you permanently banned from an indoor range.

1. Sweeping other individuals after loading a weapon behind the firing line is very bad. All your weapons should be empty until you reach your shooting station.

2. Turning the handgun sideways while trying to clear a malfunction or insert/remove a magazine. This will point the muzzle at a fellow shooter. Or, after shooting a gun, the shooter fails to clear the weapon and then places the gun somewhere near the shooting station with the muzzle in an unsafe position.

3. Reacting unpredictably when firing a high recoil handgun. We’ve seen people take a second shot by accident with the muzzle way off target.

4. Not obeying range commands — in particular continuing to shoot during called cease-fires.

5. Poorly aimed shooting that hits target frames or carriers, causing ricochets.

Seven Types of People at the Gun Range — HUMOR

This video is satire, but with lots of truth in the characterizations. Laughter guaranteed.

Double-Up on Hearing Protection When Shooting Indoors

Howard Leight Impact Pro Electronic Muffs NRR 30

When shooting rifles and pistols indoors we recommend quality muffs with earplugs underneath, offering double protection. When inside an enclosed range, with other shooters blasting away right next to you, you really need effective hearing protection. But you also need to hear range commands and be able to communicate with your fellow shooters. That’s why we recommend electronic muffs with plugs underneath.

Howard Leight Impact Pro Electronic Muffs NRR 30

Permalink - Videos, Handguns, Shooting Skills No Comments »
September 9th, 2024

FREE NRA Experienced Hunter Education Courses Online

Experienced Hunter education course NRA

Hunting season is starting soon in most areas of the country. Here’s a way you can improve your hunting skills/knowledge. The NRA is offering a FREE online Experienced Hunter Education Course for those preparing to take advantage of the 2024 hunting season.

“Our Experienced Hunter Education Course provides those who might have taken a season or two off a convenient way to sharpen their skills before heading back into the field,” said Peter Churchbourne, director of NRA’s Hunters Leadership Forum.

NRA’s free 2-hour course is a firearm and hunting safety-training refresher in a convenient and engaging platform available through desktop, tablet, or smartphone. The course is available to everyone at www.NRAEHE.org. NOTE: The course is NOT a substitute for state-mandated hunter safety requirements and does not offer any certifications.

Experiencd Hunter education course NRA

The NRA’s NRA Experienced Hunter Education Course, is an online training program designed to help hunters brush up their skills. Free to all, this comprehensive hunting refresher course will help hunters become safer and more confident before heading out into the field. CLICK HERE for more information.

Experienced Hunter education course NRA

“If you’ve taken a break from the shooting sports or haven’t hunted in a season or two, our Experienced Hunter Education Course is the perfect refresher for firearms safety and safe hunting practices,” explained Elizabeth Bush, managing director of NRA Community Engagement. “Best of all, we’re offering this service completely free of charge.”

Course Description
This online training course is specifically designed for individuals who have not hunted in the past year or more and are looking for a safety refresher before they head back out in the field. In this course, hunters will have the opportunity to refresh their skills by taking a look at safe hunting practices and firearms safety. Once completed, you will be a safer hunter in the field.

Permalink - Articles, - Videos, Hunting/Varminting No Comments »
September 7th, 2024

Saturday Movies — Five Great 3D Animations Look Inside Guns

Saturday movies Matt Rittman 3D animation AK47 AR-15 Glock 19 M16 bolt-action pump-action computer graphics Kar 98-K modern sporting rifle

409,000,000 views! Today’s five feature videos have, collectively, been viewed 372 million times on YouTube. Today’s Saturday special features five remarkable animated firearms videos from Matt Rittman, a very talented computer graphic artist. Matt employs multiple software programs to create these incredibly detailed animations. His software tools of the trade include Cinema 4D, Substance Painter, and Corona renderer. Don’t think this is easy. Some of these videos took over 500 man-hours to create. Enjoy!

AR-15 Full Animation — Components and Function

While there are other AR-15 animations on YouTube, we think this is the most accurate and creative, showing the function of a wide variety of components, including the bolt carrier, extractor, trigger, stock buffer, safety system, forward assist, and mag release. It also shows modes of a military M16, showing 3-round burst fire, and full-auto, employing disconnectors and auto sear. If you are planning to assemble/disassemble an AR, this is definitely worth watching start to finish. This video has recorded over 2 million views in just three weeks!

Elements of Video:

0:15 Ammunition Loading
0:58 Bolt Locking
1:37 Forward Assist
1:56 Firing Sequence
2:58 Extraction & Ejection
3:16 Hammer Reset / Cartridge Feed
3:48 Trigger Reset

4:00 Auto Fire
4:58 Burst Fire
6:22 Bolt Catch
6:40 Sights
7:33 Adjustable Stock
7:50 Ejection Port Cover

Mauser Kar-98K Bolt Action Rifle video

This elaborate 3D animation shows how a Mauser-type Karabiner 98 Kurz (aka Kar-98K) bolt-action rifle works. Substance Painter was used to create the wood stock texture. Creator Matt Rittman states that this 3.7 minute video took over 500 man-hours to create. You have to admire the dedication involved in that kind of hard work.

Elements of Video:

0:21 Cocking the Action
0:41 Loading
0:55 Ammunition Feeding
1:15 Firing Sequence

1:52 Extraction & Ejection
2:28 Safety Operation
2:59 Bolt Sleeve Lock

Glock 19 (Gen 4) — Inside and Out and Function

This 3D animation video shows the popular Glock 19 (Gen 4) pistol. This modern, polymer-framed, striker-fired pistol has constant trigger pull for all shots. Some folks call this a DAO (double-action-only) trigger but that’s not really correct. Unlike the Model 1911, on a Glock there is no external safety on the frame or slide. The trigger “shoe” (the part that contacts finger) includes a central blade. This prevents the gun from firing unless the trigger is depresses normally. Glock calls this the “safe action”. The creator, Matt Rittman states: “Cinema 4D was used to create each individual part, as well as animating everything. Substance Painter was used to create the main textures. Corona renderer was used to render everything. This animation [with 84.6 million views] took me over 500 hours to create.”

Elements of Video:

0:11 Basic Function
0:39 Case Extraction
0:47 Cartridge Loading
1:02 Trigger Reset
1:28 Trigger Safety

1:40 Firing Pin Safety
1:53 Drop Safety
2:06 Barrel Rifling
2:21 Cartridge Feed

How a Pump Shotgun Works

Pump shotguns are essential firearms for hunting and home defense. The clever design of pump-action shotguns make them reliable even when feeding large diameter, blunt-ended 12 gauge shot-shells.

Elements of Video:

0:26 Ammunition Loading
0:57 Shell Carrier
1:13 Shell Latches
1:47 Bolt Locking
1:57 Firing Sequence

2:17 Shotgun Shell Anatomy
2:33 Shot Propulsion
2:51 Extraction & Ejection
3:10 Hammer / Trigger Reset

How a Full-Auto AK-47 Rifle Works

With 233 million views, this AK-47 video might just be the most-watched firearms tech video on YouTube. The video highlights the design features the account for the AK’s legendary reliability. For viewers with an eye to detail Matt adds this clarification: “The firing pin does NOT puncture the bullet primer. It just strikes it against the anvil, initiating the firing sequence.”

Elements of Video:

0:17 Firing Sequence
0:27 Cartridge Anatomy
0:49 Extraction & Ejection

0:55 Ammunition Feed
1:01 Hammer Reset
1:23 Automatic Fire

Permalink - Videos, Gear Review, Gunsmithing No Comments »
September 6th, 2024

New Vortex Compact Spotting Scope for Hunting and PRS/NRL

vortex viper spotting scope 11-22x50 HD

This new ultra-compact spotting scope that should prove useful for hunters and PRS/NRL competitors. The Vortex Viper HD 11-33x50mm spotting scope weighs just 27 ounces — great for back-country hunting where light weight and portability is crucial. This spotter is offered in both straight and angled models for $599.99. It employs a handy dual-focus system, allowing a rapid initial focus plus precision final focus.

vortex viper spotting scope 11-22x50 HD

The compact Viper HD 11-33×50 has an HD Optical System encased in rugged outer body with rubberized armor. About the size of a large water bottle, this compact, 27 oz. spotter stows easily in a pack. It features a removable eyepiece and has an ARCA mount for tripods.

- Compact and Lightweight maximizes portability for long treks
– Dual-Focus enables rapid and precise image focusing
– ARCA-Swiss Compatible enables quick, versatile, and secure mounting options
– Removable Eyepiece enhances packability, ideal for backcountry hunts
– Twist-up Eyecup provides customized eye relief
– Rubber Armor ensures durability, protection, and a non-slip grip

vortex viper spotting scope 11-22x50 HD
vortex viper spotting scope 11-22x50 HD

For a detailed list of technical specifications, frequently asked questions, and high-resolution images, check out the Viper® HD 11-33x50mm Spotter on the Vortex New Product Portal.

Permalink - Videos, Gear Review, Optics No Comments »
September 6th, 2024

Improve Your Shooting by Using an Anti-Cant Device

rifle level canting shooting rifle Ryan Cleckner

In a helpful NSSF video, Ryan Cleckner explains why you normally should avoid canting your rifle — rotating it clockwise or counter-clockwise. Cleckner explains that canting the rifle in one direction or another will change the point of impact: “When you rotate the rifle, not only does the [POI move] in the direction that you’re rotated, [but] it also loses some of its elevation as it rolls down.” This, Cleckner explains, can make you miss on one side or the other:

Cant to the Left — You’re going to miss low and left.
Cant to the Right — You’re going to miss low and right.

rifle level canting shooting rifle Ryan Cleckner

In this video, starting at the one-minute mark, Cleckner shows the effect of rifle canting when engaging a 600-yard target. A few degrees of cant (either to the left or to the right), moves the shot POI completely off the steel silhouette target. The POI change occurs mainly because you are lowering (and laterally shifting) the scope sight-line relative to the bore axis, effectively changing your zero.

David Tubb has explained: “Every 1 degree you are off on a cant, is about six inches of difference laterally at 1000 yards”.

Position Shooting with Sling — Rifle Cant Considerations
Cleckner’s discussion assumes that the scope or sights are set to hit center with the rifle level and plumb. That works for most situations when shooting prone off bipod, front mechanical rest, or front sandbag. However, many sling shooters, including David Tubb and John Whidden, do tilt or cant their rifles slightly inward because this allows a more comfortable hold with sling, or allows better eye-to-sight alignment. Holding the rifle at an angle can work — but the angle of cant must be consistent for every shot. Canting the rifle is not a sin by itself. However, after you confirm your zero on your target, the degree of cant must be the same for EVERY shot. You must maintain that exact same degree of rotation on each shot or you will experience the shot POI movement Cleckner illustrates. Consistency is the key.

John Whidden
John Whidden, 5-time Nat’l Long Range Champion, holds a Palma rifle. John now shoots a match rifle with an Anschutz stock which he holds more upright, but still with some counter-clockwise cant. John also installed his iron sights at an angle so that the adjustments are correct (and plumb) even with his canted hold: “While it may not be obvious in the picture, the sights on my rifle are set up so that they’re straight vertical and horizontal while I hold the rifle canted. Making sure your adjustments (scope or sights) are vertical and horizontal is a critical piece of the pie.”

Inexpensive Dual-Diameter Scope-Mounted Bubble Level
The best way to avoid inconsistent rifle canting is to use a bubble level fitted to rail or scope. One very affordable and versatile product is the Jialitte Scope Bubble Level. This features a 30mm milled inside diameter, plus an inner insert ring so it will also fit 1″-diameter main tubes. The Jialitte unit is nicely radiused, and has a low profile in the middle. User reviews have been very positive. You could easily pay $35.00 or more for a 30mm scope level. This costs just $9.99 on Amazon.

Scope Optic bubble level 30mm 1

Permalink - Videos, Gear Review, Optics No Comments »
September 5th, 2024

Clean Your Muzzle Brakes — Here Are Effective Cleaning Methods

barrel cleaning muzzle brake break device port carbon removal

Many hunters and precision rifle competitors use muzzle brakes because these ported devices reduce felt recoil significantly. That makes a real difference getting back on target for quick follow-up shots. While many rifle owners appreciate the benefits of muzzle brakes, they may also neglect their brakes, allowing hard carbon and powder residue to build up. Not good. You should regularly clean your muzzle brake to remove fouling and carbon build-up.

barrel cleaning muzzle brake break device port carbon removal

As Mark Edgreen posted: “Carbon build up on the crown and in the brake is a recipe for poor accuracy.” And another gunsmith reported that customers complained about guns that “shot out way too early” but they only needed to have the brakes cleaned.

Gunsmith and PRS/NRL competitor Jim See recently reminded his Facebook Fans about the importance of cleaning muzzle brakes: “How many times do I have to say it? You need to maintain your rifles. Clean your muzzle brakes people!”. Jim, who runs Elite Accuracy LLC, notes that hard carbon build-up in brakes can definitely harm accuracy. Look at this example:

barrel cleaning muzzle brake break device port carbon removal

Muzzle Brake Cleaning Methods
There are various methods for cleaning a brake, we list a variety of techniques, but we would start with NON-corrosive ultrasound. You’ll want to remove the muzzle device before doing these tasks.

1. Use Ultrasonic Cleaning Machine with cleaning solution. This may be the most efficient method: “I place my brake in the ultrasonic cleaner. Shiney as new.” (Jim Moseley).

2. Spray with commercial Carb Cleaner and brush. Then apply anti-corrosion coating.

3. Soak in half hydrogen peroxide and half vinegar. Suggestion: “Let sit over night and carbon melts off. Brush remaining carbon off, rinse and put the brake back on.” Apply anti-corrosive before mounting.

4. Soak in 50/50 solution of water and white vinegar and brush. (Be sure to apply anti-corrosion coating, such as Eezox, after soaking).

5. Tumble in liquid solution with stainless pins. Comment: “Comes out slightly faded, but perfectly clean on stainless, non-painted brakes though.” Warning — do NOT do this with threaded brakes — tumbling could affect threads of screw-on brakes. Also, tumbling can harm painted or Cerakote finishes.

Gunsmithing Tip: By fitting the muzzle brake so that the barrel crown is slightly forward, it is easier to wipe carbon fouling off the end of the barrel. See photo:

barrel cleaning muzzle brake break device port carbon removal

Permalink - Videos, Tactical, Tech Tip No Comments »
September 4th, 2024

Reloading Tip — How to Make Effective Spray-On Case Lube

DIY yourself lanolin case lube lubricant One Shot Ultimate Reloader Gavin Gear 6.5 Guys

Tired of spending $15-$25 for a can of spray lube that doesn’t last that long? For about the same price as a single 10 oz. can you can make your own effective spray lube that should last for multiple seasons and lube thousands of cases quickly and easily.

In the YouTube video embedded below, our friend Gavin Gear of UltimateReloader.com shows how to make your own case lube using simple, inexpensive ingredients. As recommended by the 6.5 Guys, this Liquid Lanolin + Isopropyl Alchohol mix works well and is very cost-effective. You can make a pint of this home-brew Lanolin case lube that will lube thousands of cases — many more than a typical commercial aerosol spray can (that’s mostly compressed air).

Complete Case Lube Instructions on UltimateReloader.com »

Gavin tells us: “Per the 65guys instructions, I ordered the same components and spray bottles, and these worked out great”:

1. Swan Isopropyl Alcohol, 99%, Pint, 16 Ounce (2-pack)
2. Home Health Liquid Lanolin, 4 Ounce
3. Chemical Guys ACC_121.16HD-3PK Chem. Resistant Heavy Duty Bottle/Sprayer (16 oz.)

Gavin describes the exact mixing process on his Ultimate Reloader website. Gavin says this lube mix is a good complement to the Hornady One-Shot (pistol) and Dillon DCL (rifle) lubes he has used for pistol and rifle reloading sessions. CLICK HERE to read more.

Permalink - Videos, Gear Review, Reloading 1 Comment »
September 3rd, 2024

When Ammo Catches Fire — SAAMI Ammunition Burn Tests

With major forest fires this past year in Western states, many have wondered about hazards faced by gun owners in fire zones. This important video shows what really happens when loaded ammunition burns. You will probably be surprised. Contrary to Hollywood notions, the ammo doesn’t ignite in a massive explosion. Far from it… basically the rounds “cook off” one by one, and the bullets release at relatively low velocity. We’ve featured this SAAMI research project before, but it is worth reprising for those who have not yet seen the burn tests.

A few years back, SAAMI released an important video concerning ammo and fire. With professional fire-fighters standing by, over 400,000 rounds of ammo were incinerated in a series of eye-opening tests. If you haven’t had the chance to view this video yet, you should take the time to watch it now

The Sporting Arms and Ammunition Manufacturers’ Institute (SAAMI) has produced an amazing 25-minute video that shows what actually happens to sporting ammunition involved in a fire. This video shows the results of serious tests conducted with the assistance of professional fire crews. We strongly recommend you watch this video, all the way through. It dispels many myths, while demonstrating what really happens when ammunition is burned, dropped, or crushed.

Watch SAAMI Ammunition Testing Video

Video Timeline

  • 2:10 Impact Test (ignited outside firearm)
  • 3:40 65-foot Drop Test
  • 5:08 Bullet Impact (.308 Win firing)
  • 7:55 Blasting Cap Attacks
  • 9:55 Bulldozer and Forklift Tests
  • 12:20 Boxed Ammo Bonfire
  • 15:37 Bonfire without Packaging
  • 17:21 Retail Store Simulation Burn
  • 20:55 Truck Trailer Burn

Over 400,000 rounds of ammunition were used in the tests. Some of the footage is quite remarkable. Testers built a bonfire with 28,000 rounds of boxed ammo soaked in diesel fuel. Then the testers loaded five pallets of ammo (250,000 rounds) in the back of a semi-truck, and torched it all using wood and paper fire-starting materials doused with diesel fuel.

The video shows that, when ammo boxes are set on fire, and ammunition does discharge, the bullet normally exits at low speed and low pressure. SAAMI states: “Smokeless powders must be confined to propel a projectile at high velocity. When not in a firearm, projectile velocities are extremely low.” At distances of 10 meters, bullets launched from “cooked-off” ammo would not penetrate the normal “turn-out gear” worn by fire-fighters.

We are not suggesting you disregard the risks of ammo “cooking off” in a fire, but you will learn the realities of the situation by watching the video. There are some amazing demonstrations — including a simulated retail store fire with 115,000 rounds of ammo in boxes. As cartridges cook off, it sounds like a battery of machine-guns, but projectiles did not penetrate the “store” walls, or even two layers of sheet-rock. The fire crew puts out the “store fire” easily in under 20 seconds, just using water.

Additional Testing: Drop Test, Projectile Test, Crush Test, Blasting Cap Test

Drop Test
The video also offers interesting ammo-handling tests. Boxes of ammo were dropped from a height of 65 feet. Only a tiny fraction of the cartridges discharged, and there was no chain-fire. SAAMI concludes: “When dropped from extreme heights (65 feet), sporting ammunition is unlikely to ignite. If a cartridge ignites, it does not propagate.”

Rifle Fire Test
SAAMI’s testers even tried to blow up boxes of ammunition with rifle fire. Boxes of loaded ammo were shot with .308 Win rounds from 65 yards. The video includes fascinating slow-motion footage showing rounds penetrating boxes of rifle cartridges, pistol ammo, and shotgun shells. Individual cartridges that were penetrated were destroyed, but adjacent cartridges suffered little damage, other than some powder leakage. SAAMI observed: “Most of the ammunition did not ignite. When a cartridge did ignite, there was no chain reaction.”

Bulldozer Crush Test
The test team also did an amazing “crush-test” using a Bulldozer. First boxes of loaded ammo, then loose piles of ammo, were crushed under the treads of a Bulldozer. A handful of rounds fired off, but again there was no chain-fire, and no large explosion. SAAMI observed: “Even in the most extreme conditions of compression and friction, sporting ammunition is unlikely to ignite. [If it does ignite when crushed] it does not propagate.”

Blasting Cap Test
Perhaps most amazingly, the testers were not able to get ammunition to chain-fire (detonate all at once), even when using blasting caps affixed directly to live primers. In the SAAMI test, a blasting cap was placed on the primer of a round housed in a large box of ammo. One cartridge ignited but the rest of the boxed ammo was relatively undamaged and there was no propagation.

Permalink - Articles, - Videos, Tech Tip No Comments »
September 3rd, 2024

Great Rimfire Revolver — Smith & Wesson Model 617

Smith & Wesson 617 4

While Accurateshooter.com concentrates on high-accuracy rifles, we know that many of our readers enjoy handguns. We are often asked “What is your favorite handgun — Glock? HK? SIG Sauer?” The answer to that question may be surprising. This Editor’s favorite handgun, at least the one that gets shot most often, is a rimfire revolver — that’s right, a wheelgun.

This Editor’s first really accurate handgun was a .22 LR Smith & Wesson Model 617 that could easily stack ten shots in a dime at 10 yards. It remains my favorite and most-used handgun. What can we say about the Model 617? The single-action trigger pull is superb, and the accuracy surpasses most any semi-auto rimfire pistol, except for a few, very expensive target pistols. We like the 6″ version for the longer site radius, but the 4″-barrel 617 is also very accurate, and it balances better.

Smith Wesson model 617 .22 LR Revolver handgun
S&W Model 617 now has a 10-round cylinder, but early models were six-shooters.

We strongly recommend that new pistol shooters start off with a .22 LR rimfire handgun. The .22 LR cartridge is accurate but has very low recoil, less “bark” than a centerfire, and very little smoke and muzzle flash. New shooters won’t have to fight muzzle flip, and won’t develop a flinch from the sharp recoil and muzzle blast common to larger calibers. With the .22 LR, the trainee can focus on sight alignment, breathing, and trigger pull.

Smith & Wesson Model 617 Video Reviews
Here are two video reviews of the Smith & Wesson Model 617, both 4″-barrel and 6″-barrel versions. Both videos demonstrate the 617’s great accuracy. The reviewers concede that this handgun is pretty expensive, but all agree that the Model 617 will last a lifetime, and hold its value.

Hickok 45 Demos a 4″ Model 617. See also Hickok 45 m617 Part 2:

This Video Features the Full-size 6″-Barrel Model 617:

Recommended .22 LR Revolver Training Targets

The .22 LR cartridge makes small bullet holes in paper. These can be hard to see if you’re shooting at large, black bulls-eyes, particularly at an indoor range. Also, when shooting rimfire, you’ll go through ammo quickly. For that reason we recommend targets with bright-colored, multiple aiming points.

Pistol plinking practice Rad fluorescent target fun

Pistol plinking practice Rad fluorescent target fun

The 19″x25″ Sight-Seer target (left) is great for pistol practice. It features eight red bulls on a 1″-square grid. Ultra bright fluorescent red inks, printed on heavy, 60-lb vellum paper, are highly visible, even indoors. You can use a classic Six O’Clock hold with this target, putting the bottom of each circle on top of your revolver’s front sight.

The smaller, 8.5″x11″ Sinclair Fluorescent Sight-In Target (right) has four small diamonds surrounding a large center diamond overlaid on a 1-inch grid. Diamonds and grid are printed in fluorescent red/orange on white, heavy-grade paper so your shots print nice and clean. A 25-pack is $6.99 at Brownells.

Recommended .22 LR Ammo Box

smith wesson model 617 mtm ammo caddy carrier box plastic

When we go to the range with rimfire handguns or rifles we bring this handy ” target=”_blank”>$13.99 MTM ammo caddy. The compact carry case will hold boxed ammo, plus you can lay out your ammo in 10-round rows (with 100 rounds nose-down). This makes it easy to fill the 10-Rd cylinder on your Model 617. This ammo case is offered in both blue or red (rust) and there is room in the center for more ammo boxes. One recent purchaser notes: “Very handy box for .22 LR makes knowing your shot count easy”.

Permalink - Videos, Gear Review, Handguns No Comments »
September 2nd, 2024

Rimfire Challenge — Fun .22 LR Rifle and Pistol Competition

NSSF plus one +ONE rimfire challenge mentorship new shooters training family

The Rimfire Challenge Shooting Association (RCSA) will host its annual World Championship next month. The 2024 RCSA World Championship will take place October 19-20, 2024 at the Cavern Cove Competitive Shooting facility in Woodville, Alabama. This RCSA World Championship event will feature multiple stages with metal targets, shot with both rimfire rifle and rimfire pistol. See Rimfire Challenge action from last year’s RCSA Championship below:

Watch Action from the 2023 Rimfire Challenge Championship at Cavern Cove Range in Alabama

The RCSA promotes rimfire competition nationwide, supports beginning competitors and clubs, and solicits support for rimfire events from industry businesses. The RCSA is now an official partner of the +ONE Movement, a mentorship program organized by the National Shooting Sports Foundation (NSSF). NSSF +ONE programs encourage mentorship related to firearm safety, firearm basics, shooting sports, and hunting. The +ONE program focuses on peer-to-peer development in shooting sports and hunting.

NSSF plus one +ONE rimfire challenge mentorship new shooters training family

About the Rimfire Challenge Shooting Association
Designed to introduce new shooters to shooting sports in an exciting, family-friendly format, Rimfire Challenge matches focus on competition with .22 LR rifles and pistols. Matches are open to shooters of all shooting experience levels, with events conducted at ranges nationwide. The video below shows the Rimfire Challenge Shooting Association 2022 Championship.


NSSF plus one +ONE rimfire challenge mentorship new shooters training family
This article is Copyright 2023 AccurateShooter.com. No reproduction on any other site is permitted.

Permalink - Videos, Competition, Handguns, Shooting Skills No Comments »