Everyone should have a 9mm Luger (9x19mm) pistol. The 9mm Luger round feeds/cycles great, recoil is moderate, and a vast array of excellent 9mm handguns are available. Before the Pandemic, quality 9x19mm factory ammo was affordable and widely available. Unfortunately, with the surge in gun buying, and people hoarding ammunition, 9mm ammo is getting hard to find, or has become fairly expensive when you do find a source with ample inventory. To help with that problem, we have located four online vendors who still have 9mm Luger pistol ammo in stock today. You can find other sellers with current, available 9mm inventory on AmmoSeek.com.
NOTE: Inventories change rapidly. If ANY of these entries sell out, check AmmoSeek.com for updates.
9mm Luger (9x19mm) Factory Ammunition — Where to Buy
1. Source: Cabela’s | Product: Remington 9mm Luger Mil 115gr FMJ Brass Case
Cost: $9.99 for 50 rounds ($0.30/round)
Check for availability store by store on 10/20/2020
2. Source: AmmoShop Online | Product: Norma 9mm Luger 115gr FMJ
Cost: $24.39 for 50 rounds ($0.49/round)
In-Stock and available on 10/19/2020
3. Source: Gunslinger Ammo | Product: Belom 9mm Luger 115gr FMJ
Cost: $27.95 for 50 rounds ($0.56/round)
In-Stock and available on 10/19/2020
4. Source: ZincPoint | Product: Venom 9mm Luger 115gr FMJ Steel Case
Cost: $27.50 for 50 rounds ($0.55/round)
In-Stock and available on 10/19/2020
Back in the Good Old Pre-COVID Days…
Yes today’s price of 9mm pistol ammo is high. Consider this — in February 2018 you could get 1000 rounds of CCI 9x19mm PLUS a new Kahr CW9 pistol, all for less than the cost of the ammo alone these days.
We have used NO-LEAD Cleaner in rimfire benchrest rifles similar to this modified Suhl 150-1. It helped restore accuracy with minimal brushing.
Made by the same smart folks that created Wipe-Out™, and Carb-Out™, NO-LEAD Brushless Lead Remover™ really works. Honest. If you are an active rimfire shooter, or if you shoot cast lead-alloy bullets in centerfire rifles and pistols, you should try this product. We now use NO-LEAD in our rimfire benchrest rifles, and in some centerfire guns that receive a steady diet of soft-alloy cast bullets (90%+ lead). (With rimfire guns, you don’t need to use NO-LEAD very often — maybe every 300-400 rounds unless you have a real fouler of a barrel.)
If you’ve got stubborn lead fouling in a rimfire barrel, or on a pistol’s muzzle brake/compensator, you should definitely give this stuff a try. We don’t know how but it does soften lead deposits. The manufacturer says you don’t need brushes, but we found that a bit of brushing (after NO-LEAD application) can help remove more serious lead build-up.
Yes we were surprised to find a lead remover that really works. We tried a half-dozen other lead “cleaners” that promised to dissolve lead and most of them, we discovered, are nearly useless. There’s a reason for that, as the lead alloys used in bullets don’t react to typical petrochemical-based solvents. It took the Wipe-Out chemists over five years to perfect this water-based solution that really does dissolve lead.
NO-LEAD Cleaning Procedure — Read Carefully NO-LEAD Lead Remover is a clear, red gel that is easy to apply. Just swab it in your bore (or on muzzle brakes) with wet patches or bore mop and let it sit for a few minutes. (The manufacturer says you can leave the NO-LEAD for up to 20 minutes, but that long of a dwell time does not seem necessary with our rimfire barrels.) When it contacts lead it will start to foam and you’ll see that the NO-LEAD solvent turns a pastel pink when it dissolves lead. The pink comes from the formation of lead oxide. After the recommended dwell time, simply patch out the dissolved lead deposits (you can also use a nylon brush for stubborn lead build-up).
NOTE: After cleaning, it is very important that you get all the NO-LEAD out of your barrel, and neutralize it. We recommend following the application of NO-Lead with Wipe-out or Patch-Out to neutralize the NO-LEAD, clear the bore, and remove residual carbon and copper fouling. If you don’t have Wipe-Out or Patch-out, flush the barrel thoroughly with Rubbing Alcohol or even a solution of Dawn dish detergent — then re-oil the bore.
Be Sure to Neutralize NO-LEAD After Use
Remember that N0-LEAD is a strong, slightly acidic chemical that needs to be neutralized after use. If you leave it on a nice, blued barrel for too long, it can harm the bluing. NO-LEAD will remove all the surface oils from the barrel bore. For this reason it is recommended that you neutralize NO-LEAD with Wipe-Out, or Patch-Out, which both contain effective corrosion inhibitors. If you don’t have those products, once you’ve flushed the NO-LEAD with something like rubbing alcohol, then follow with a gun oil. Caution: A petroleum-based gun oil will NOT, by itself, neutralize NO-LEAD. You need to neutralize first, then apply the corrosion inhibitor (or do it all in one step with Wipe-Out or Patch-Out).
Where to Buy NO-LEAD Lead Remover
NO-LEAD Lead Remover costs $16.99 for an 8 oz. squeeze bottle with a flip-top spout. This product is sold directly by Sharp Shoot-R Precision Products through Sharpshootr.com, or you can purchase NO-LEAD through many other online vendors. For more information, send an email via the Sharp Shoot-R Contact Form or or contact SharpShoot-R at (785) 883-4444. You can ask for Terry Paul, Sharp Shoot-R’s owner and the master chemist who developed the NO-LEAD formula.
CCI’s has introduced .22 WMR Maxi-Mag ammo with Clean-22 coating technology. New CCI Maxi-Mag Clean-22 Segmented Hollow Point (SHP) ammo uses an exclusive polymer bullet coating to reduce copper and lead fouling in barrels, without leaving a residue. Shipments of this new product have started.
Editor: We’ve used polymer-coated bullets in larger calibers (.38 Special and .45 ACP), and the coated bullets really do reduce lead fouling in barrels, making barrel cleaning significantly easier.
Segmented Hollow Point (SHP) Bullet for Varminters
The bullet that comes with the new CCI Maxi-Mag Clean-22 ammo should work well for varminters. The 46-grain SHP bullet splits into three equal-size pieces on impact, tripling the number of wound channels. CCI states: “The polymer bullet coating allows this separation at much lower velocities and longer distances than a conventional copper jacket. The bullet’s overall geometry is optimized for accuracy.” Notably, this SHP bullet is currently the industry’s only segmenting hollow-point bullet in .22 WMR.
CCI Product Manager Dan Compton states: “I can’t wait to hear stories and see photos from … customers who use this new [.22 WMR] magnum rimfire round on prairie dog towns, in the squirrel woods, and for their fur-trapping efforts.”
CCI Maxi-Mag Clean-22 .22 WMR Ammo Features:
— Polymer bullet coating reduces lead fouling in the barrel without leaving residue
— Industry’s only segmenting hollow-point bullet in 22 WMR
— Allows expansion at lower velocities than copper-jacketed bullets
— Reduces the risk of penetration through the target and beyond
— Optimized bullet geometry for improved accuracy
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Sportsman’s Warehouse — Tikka T3x SS Superlite, $699.99
⏺ Very good choice for hunting rifle — light, accurate, good action
We are fans of Tikka rifles for hunting. Build quality is good, and Tikkas have nice triggers and smooth-running actions. The Tikka T3x SS Superlite Rifle, a Sportsman’s Warehouse exclusive, is now on sale for $699.99 — a $100 savings off the regular price. Offered in numerous chamberings, this rifle features stainless action and barrel, light overall weight, and nice, 2-4 lb. adjustable trigger. Weight (without scope) is just 5.9 pounds. The T3x has a “noise reduction” synthetic stock.
2. Amazon — Tipton Ultra Gun Vise, $129.95
⏺ Very strong and versatile — use for all kinds of firearms
You need a solid, secure platform to clean and work on your guns. Most gun cleaning stands aren’t adjustable enough or are too flimsy. Not so with the Tipton Ultra Gun Vise. Weighing-in at about 10 pounds, this beefy gun vise provides a steady base. The frame is metal for strength. This Ultra Vise boasts stout adjustable jaws, specialized AR holder, and several accessory trays. Threaded feet allow the vise to be leveled on your bench. With this system you can work on just about anything including bolt-action rifles, AR-platform rifles, shotguns, pistols, and even compound bows. To fit wide forearms, you may have to remove or modify the front pads. Our Deals Editor, who owns this gun vise, reports this is an outstanding product, well worth the $129.95.
3. Sportsman’s Warehouse — Leupold Scope Sale with Gift Cards
⏺ Great prices on Leupold scopes — cash gift cards too
Hunting season is upon us. If you’re looking for a tough, “go anywhere and never lose its zero” hunting scope, think Leupold. Sportsman’s Warehouse is running a Leupold Gold Event Sale right now. You’ll find riflescopes, binoculars and more at very good prices. PLUS you’ll earn free gift cards worth $10, $25, $50, or $75 depending on how much you spend.
Nearly every firearm, press, ring set, or other gun accessory relies on hex or torx wrenches. You need the right tools for the job. Check out this SAE/Metric/Hex/Torx P-Handle Driver Set 30 Piece tool kit at Midsouth. It features popular driver types/sizes you’ll need, held in a convenient stand. These special “P-handle” drivers provide two different lengths and leverages ensuring you’re always in control of any threaded fastener.
⏺ Everyone needs a good .22 LR pistol — this is complete kit
Everyone should own a good .22 LR pistol. Rimfire pistols are fun and great for training. Plus .22 LR ammo is cheap! If you’ve been looking for a nice, yet affordable .22 LR pistol, the Smith & Wesson SW22 Victory is a good option. And right now you can get a complete SW22 Victory Pistol plus STS RANGE KIT for just $389.88. Not only do you get a great stainless .22 LR handgun (with fiber optic sights and included Picatinny rail), but you also get a range bag, ear muffs, safety eyewear, a bore snake, and a 10-pack of Caldwell Orange Peel bullseye targets.
⏺ Good spotter for price that includes tripod and carry case
Spotting scopes are vital tools for shooters. But they can be pricey, especially those with large front objective lenses. Enter the Konuspot 80 20-60x80mm Spotting Scope from Creedmoor Sports. The big 80mm objective gathers plenty of light —- good for low-light shooting and observing. For the money, this is a surprisingly good spotter (though don’t expect it to compare with a high-end Kowa, Swaro, or Zeiss). And if you order now you get a small tripod, protective case, camera adapter, and smartphone adapter at no extra charge. Very good package deal.
7. Graf & Sons — Alternatives for Hodgdon H4350 & H1000
⏺ Can’t find H4350 or H1000? Try these powders instead
Powder shelves are empty in stores, and popular powders like H4350 and H1000 are even out of stock at online vendors. Did you know there are some great alternatives out there That ARE in stock? If you’re looking for a great alternative to H4350 that shoots cooler and is temp-stable, consider Vihtavuori N165. If you’re searching for H1000, we recommend IMR 7977 Enduron as a fine substitute. Both of these choices are in stock now at Graf’s, which has very reasonable shipping and HazMat fees.
8. Brownells — MagPul 30rd PMAG Gen M2 10-pack, $119.99
⏺ Insanely good deal on quality MagPul PMAG® AR magazines
In today’s world, AR owners can use plenty of high-quality, reliable “full-capacity” magazines. Right now Brownells is running a great sale on MagPul PMAGS — some of the best you can buy. MagPul’s TEN-Packs of AR-15 PMAG Gen M2 30-round MOE Magazines are on sale now for just $119.99. But it gets better — on checkout use Brownells CODE PTT to save another $10, for a net cost of $109.99. This is a killer deal on excellent AR PMAGs.
9. Amazon — Silicone Gun Socks with Multiple Sizes, From $3.79
⏺ Long guns should be in gun socks or borestores when in gunsafes
Most people think that once you put a gun in the vault it’s safe from corrosion but that couldn’t be further from the truth. We can’t count the number of people who have left guns in a safe for years only to pull them out and find rust all over them. Avoid future surprise and disappointment by using these affordable silicone treated socks. Offered in assorted sizes for pistols, rifles, and shotguns, prices range from $3.79 (pistol) to $7.39 (tactical rifle). We also recommend using Eezox or other good corrosion inhibitor on metal parts. With that and a good treated gun sock and a Goldenrod, rust should not be a worry anymore.
Need a simple, easy-to-use drop chart for your rifle? Something you can tape right to the buttstock? Then check out Hornady’s handy Online Ballistics Calculator. This user-friendly calculator will compute your drops accurately, and output a handy “Cheat Sheet” you can print and attach to your rifle.
Here’s how it works. From the Ballistics Calculator Page, simply input G1 or G7 BC values, muzzle velocity, bullet weight, zero range, and a few other variables.
Click “Calculate” to view the full chart (shown below). Then click “View Cheatsheet” and the simpler, 4-line Drop Chart (shown above) appears. Click “Print” and you’re done!
The online ballistics caculator is easy to use. You can select the basic version, or an advanced version with more data fields for environmental variables (altitude, temperature, air pressure, and humidity). You can also get wind drift numbers by inputing wind speed and wind angle.
Conveniently, on the trajectory output, come-ups are listed in both MOA and Mils — so this will work with either MOA clicks or Mil-based clicks. There are more sophisticated ballistics solvers available on the web (such as the outstanding Applied Ballistics Online Calculator), but the Hornady Calculator is very simple and easy to use. If you just want a basic drop chart, you may want to check this out.
NOAA photo of flooding after Hurricane Floyd in 1999. The Colt Python Revolver once belonged to Elvis Presley (Rock Island Auction).
Firearms owners who have seen their guns and stored ammunition submerged by flood waters in storm-wracked areas are probably wondering if their firearms and ammunition can be salvaged and safely used. To answer these questions, the NSSF and the Sporting Arms and Ammunition Manufacturers’ Institute (SAAMI®) created two documents outlining the proper response to submersion of guns and ammo. If you’ve got wet guns and/or ammo, download these two PDF files and read them carefully.
The SAAMI document “Guidance on Firearms That Have Been Submerged or Exposed to Extensive Amounts of Water” points out two major concerns about firearms that have been exposed to water: parts susceptible to moisture and rust damage such as metal parts, wood stocks and grips, and optics; and, secondly, infiltration of the action, barrel and safety systems by grit, silt and other foreign debris.
#1 Always unload firearms before beginning any treatment process.
It’s important to limit moisture and corrosion damage to the component parts of the firearm. This can be accomplished by disassembling the component parts and using up to two coats of a moisture-displacing lubricant such as Hoppes #9 MDL or WD-40 to clean and stabilize the parts while, importantly, following the product’s directions so as not to damage, for instance, plastic or synthetic parts. Another tip is to allow wood stocks and grips to air-dry and not be force dried by exposure to heat.
The document emphasizes that once the firearm has been thoroughly dried, consideration must be given to having the firearm inspected and serviced by the manufacturer, an authorized service center, or a qualified gunsmith before putting the firearm back in service.
Dealing with Ammunition That Was Submerged
Bottom Line, if your ammo has been submerged — DON’T USE IT. SAAMI explains why…
To help firearms owners determine what to do with ammunition that has been affected by water and moisture, SAAMI offers another helpful document, “Guidance on Ammunition That Has Been Submerged in Water.” This document covers differences in moisture resistance between centerfire, rimfire and shotshell ammunition, and potential hazards associated with “drying out” cartridges, including possible deterioration and damage to cartridges due to drying methods.
Another serious hazard that could result from using compromised ammunition is the potential for a bore obstruction due to partial ignition of either the priming compound or the propellant powder charge, or both. Firing a subsequent round through an obstructed barrel can result in bodily injury, death and property damage.
SAAMI provides the following cautionary conclusion: “It would be impossible to ascertain for certain the extent of the deteriorating affect, if any, the water may have had on each individual cartridge. Therefore, the safe answer is that no attempt be made to salvage or use submerged ammunition. The ammunition should be disposed of in a safe and responsible manner. Contact your local law enforcement agency for disposal instructions in your area.”
While this site focuses primarily on accurate rifles, we know that most of our readers also own pistols (and many shoot them competitively). After rimfire pistols, probably the most popular handguns in America are 9mm semi-auto pistols. Here are five products we use with our favorite 9mm semi-autos — H&K P7M8 and SIG Sauer P226. You’ll find a great carry case, high-quality electronic muffs, a pistol “range station”, affordable 9mm ammo, and two cool training targets.
1. CaseCruzer Handgun Cases
A California company, CaseCruzer, makes the nicest multi-pistol hard cases we’ve ever seen. With capacities from 3 pistols to 6 pistols, these lockable range cases hold handguns securely in angled “quick-draw” slots. In addition to the molded pistol carriers, there are slots for magazines together with a separate compartment for muffs, ammo, and other accessories. Starting at $240.00 MSRP for the Quick Draw 3-Pack, these boxes are expensive, but they offer great protection with great usability. Water-tight and dust-proof, CaseCruzer cases are airline approved (ATA 300).Now that you’ve spent thousands of dollars on the new benchrest, PRS, ELR, or hunting rifle (and thousands more on optics), how are you going to get it to the range or hunting grounds? It’s important to transport your valuable firearms in very high quality gun cases. Good padded soft cases can work, but for long-distance hauling (and all air transport), we recommend hard cases with quality foam inside.
2. Impact Pro Electronic Muffs 30 dB Noise Reduction Rating
When shooting pistols indoors we recommend quality muffs with earplugs underneath, offering double protection. When inside an enclosed range, with other shooters blasting away right next to you, you really need effective hearing protection. But you also need to hear range commands and be able to communicate with your fellow shooters. That’s why we recommend electronic muffs with good foam plugs underneath. That gives you serious hearing protection during live fire, with the ability to hear voices and converse.
For pistol shooting, we like the latest Howard Leight Impact Pro Muffs. These offer an impressive 30 dB Noise Reduction Rating (NRR), an exceptional NRR. In addition, these muffs are pretty comfortable and offer Headphone Functionality so you can connect to your smartphone, MP3 player, or other device. These quality muffs are $66.13 on Amazon.com complete with a set of safety eyewear.
3. Range Station for Pistol Shooters
The Range Station combines an ammo compartment with a roll-out mat. Great idea. Some gun ranges only have concrete benches, or shooting stations with horizontal surfaces covered with dirt, powder residues, and other debris. You don’t want to put your $2000 Colt Python on that mess. The 12″x24″ Padded Gun Mat stays put on the counter-top and holds guns and gear. The case snaps to either the right or left side of the mat. Interior trays are sized for standard ammo boxes and magazines. Separate compartments hold smaller range gear such as rulers, target markers, and more. When finished, the mat can be rolled and stored neatly and compactly in the case. This handy Range Station is $29.99 on Amazon.
4. MTM AC4C Ammo Crate with 4 Ammo Boxes
The versatile MTM AC4C Ammo Carrier features four lockable polymer ammo cans in a fitted, four-slot 23.5″ x 11.3″ x 7.5″ carry crate. This makes it easy to haul four full ammo cans. Actual purchasers have raved: “Moments after I received this storage box set I ordered another. Very well-built and great design — a steal at the price.” This popular product is available now at Midsouth for $34.37. The system includes four lockable, O-Ring 11.3″ x 7.2″ x 5″ ammo cans (AC30T) for multi-caliber ammo storage. The crate even includes tie-down points for transport in a cart or ATV.
5. High Contrast Pistol Training Targets
Here are two of our favorite pistol targets. The Splatterburst 12″ x 12″ sight-in target works great for handguns in indoor ranges. Bullet holes appear as bright neon yellow halos. And the contrasting grid lines let you quickly estimate your group size. Each target has five diamonds, and the top of each diamond provides a precise aim point for your front sight. The 12″ Bullseye Pistol Diagnostic Target diagnoses common problems based on shot impact zones. While this target is designed for righties, left-handed shooters can use the target too. Just observe the opposite tips.
Ace tactical shooter and gunsmith Jim See of Elite Accuracy LLC recently tested a Frankford Arsenal rotary brass tumbler. Like the older Thumbler’s Tumblers, this can tumble your cases in a liquid solution. The wet-tumbling process worked very well Jim reports. Posting on Facebook, Jim noted: “I was super impressed with the Frankford Arsenal rotary tumbler and cleaning packs they sent me. I ran 350 pieces of brass for one hour. They now look great.” Jim appreciated not having to deal with dry tumbling media, such as crushed walnut shells. Dry media produces dust and can leave residues or clog flash-holes.
Interestingly, Jim recommends you try wet-tumbling WITHOUT using stainless media. At least give it a try. Tumbling without media simplifies the process and you don’t have to worry about pins stuck in flash-holes or case-necks*. Jim reports: “Stainless steel pins come with the Frankford kit, but mine hit the trash right out of the box. There is no need to clean the inside of your cases 100% and that’s all the pins add to the equation. The brass bumping brass with hot water and Frankford’s liquid cleaner works great all by itself.” One wag stated: “That’s great to hear. Stainless steel pins are a PITA.”
Other Facebook posters concurred with Jim’s evaluation of the Frankford Arsenal Rotary Tumbler:
“I’ve had one for a couple years, and it works well. I usually run about 250-300 Dasher cases at once in it. But I use the pins because I’m OCD about clean brass.” — David W.
“I’ve had one for a year and a half and it definitely works with or without pins.” — Luke C.
“I got one about six months ago and have yet to use any SS media. I just use some dawn, distilled water, and Lemi Shine®. Turns nasty 5.56 range brass bright and shiny.” — Brian D.
“I don’t use the pins either and use a combination of Dawn soap and Lemi Shine.” — Jon N.G.
This video shows how to assemble and operate the Frankford rotary tumbler. NOTE That Jim See does NOT feel that it is necessary to use stainless media.
How to Dry Your Brass — Hair Dryer Vs. Machine
The downside of wet tumbling is that you end up with a pile of wet brass at the end of the cleaning cycle. There are many ways to dry brass, from drying in the sun to using a kitchen oven (be careful not to “overcook” your brass). One Facebook poster asked Jim: “What is your drying method for wet brass, and how long does it take?”
Jim See replied: “To start I just drain off the dirty water, and rinse the brass with clean hot water. Then I roll the brass on a towel for 30 seconds and put the brass in a one-gallon bucket. Next I insert a hair dryer in the bucket (with the brass) and let it run for about 5 minutes. With this procedure, the drying process for me is done in less than 10 minutes.”
Jack Lanhart has another method: “I use a food dehydrator. It takes 30 to 45 minutes.”
For those who don’t want to mess with towels and hair dryers, Frankford Arsenal offers a matching Platinum Series Case Dryer that simplifies the process of drying brass. Lyman also makes an excellent Cyclone Case Dryer. Both drying machines cost about $60.00 and both have multiple levels so you can separate different types of cartridge brass. Lyman states that “The forced heated air circulation of the Cyclone will dry your brass inside and out within an hour or two, with no unsightly water spots.” The Lyman dryer can also be used for ultrasonically-cleaned gun parts.
*The Frankford Rotary tumbler does include media separators if you choose to use the provided pins or other media. CLICK HERE for diagram showing how to use media separators.
Factory-loaded ammunition has become very hard to find, particularly pistol ammo. Concerns over social unrest, personal security, and the upcoming election have spiked demand for loaded ammo. Everyone is asking “where has all the ammo gone?”
Pistol Ammo Hard to Find
In particular, 9mm pistol ammo flies off the shelves as soon as it arrives, and even major online vendors such as Midsouth Shooters, MidwayUSA, and Natchez have very limited supplies.
Need Ammo? Load Your Own…
One answer to the ammo shortage is to load your own. And if you want to produce a large quantity of ammo in a short amount of time, the progressive press is the answer. There are many progressive press systems, from modest Lee progressives to high-end, automated systems from Mark 7 (Lyman). In this article we feature the “latest and greatest” progressive press from Dillon — the new eight-station RL 1100 Press with Case-Feeder.
Our friend Gavin Gear of UltimateReloader.com got his hands on Dillon’s impressive new RL 1100. In two videos, Gavin shows how to set up the RL 1100 and then he demonstrates how to produce 9mm pistol ammo with this impressive 8-station press.
Gavin says: “My Dillon RL-1100 is cranking out the 9mm, and in this video we bring it up to ‘full tilt’ speed” [with the MR. Bullet Feeder and the Dillon Case-Feeder]. If you watch the video, you’ll see Gavin produce 9mm ammo at a rate of nearly 50 rounds per MINUTE!
Gavin equipped his new RL 1100 with two cool products from Double Alpha Academy (DAA) — the Mr.Bulletfeeder® as well as an advanced, Magnetic Powder Check. When loading ammo you can never be too safe, so we definitely recommend the use of powder-check dies (we use a conventional RCBS powder-check die on our progressives). The DAA bullet feeding system is an important add-on that significantly increases output rates when used in concert with the Dillon Case-Feeder (blue funnel).
RL 1100 Reloading Stations with Powder Check and Bullet Feeder
RL 1100 Stations shown above:
1. Case inserter
2. Sizer/De-Primer
3. Swager (with hold-down)
4. Priming (no die)
5. Powder charge and expansion (expansion for pistol cartridges only)
6. Double Alpha Magnetic Powder Check
7. Mr. Bullet Feeder bullet feed die
8. Bullet seating and Crimping
Note: In order to accommodate the magnetic powder check die AND the bullet feed die, bullet seating and crimping were combined at the last station.
The RL 1100 has some very impressive features that allow faster and easier ammo production. An Eccentric Roller Bearing Drive System reduces friction. The RL 1100’s heavier frame provides greater rigidity for more efficient cranking. The RL 1100 also boasts an improved shellplate indexing system. Priming is enhanced through a spring-loaded Priming Station Locator and Upgraded Primer Pocket Swager.
Dillon RL-1100 Set-Up Video:
Loading with the “Turbocharged” Dillon RL-1100
Gavin was very impressed with his RL-1100: “This reloading setup is [great]. Every crank of the lever yields a completed cartridge, and the attainable speeds are AMAZING. The case feeder and bullet feeder had no trouble keeping up with my quick pace using this setup. And it is great to know that every powder charge is being checked.
This press is very reliable and smooth, bridging the gap between lower cost home set-ups and six-figure commercial loading equipment packages. What’s next? I’ll be performing a caliber changeover to .308 Winchester.”
The DAA Magnetic Powder Check can be used on a variety of Progressive Presses.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
⏺ Great value at $279.99 with CODE 16617906 — Safe weighs 179 lbs.
Here is a great deal for a secondary safe that you might use in a workshop, bedroom, vacation property, or even an RV. This Union Safe Co. 10-Gun safe compares with Stack-On safes costing up to $560.00. Sold by Harbor Freight, this safe is rated for 10 long guns and also has a top shelf for handguns and valuables. NOTE: This safe appears for $339.99 on the Harbor Freight website. To get the $279.99 Sale price, use the Sale Code Number 16617906 when you add the safe to your shopping cart. You can also use the same Sale Code for in-store purchases. Safe Dimensions: 59″ H x 21″ W X 14″ D.
⏺ Get good shooting M1 Garand with New Criterion Barrel and New Stock
The CMP now offers a “partially refurbished” M1 Garand for $650.00. The CMP Special Rack Grade (.30-06) M1 Garand features a refinished M1 receiver, a NEW production Criterion barrel, NEW production American Walnut stock and handguards, and NEW web sling. The receiver is the only original part of the rifle that has been refinished. The CMP notes that the receiver will have heavy pitting above the wood line. If you can live with that cosmetic flaw, this is a good choice for those who want to shoot M1 Garand matches. IMPORTANT: To purchase a CMP M1 Garand, a buyer must be an adult U.S. citizen who is a member of a CMP-affiliated club. ORDERING Information HERE.
⏺ Versatile, affordable optic for PRS and Varminting
If we needed a SFP scope with MOA reticle for varmint or fun match duties, this 5-24x50mm Vortex Viper would be one of our leading choices. With a magnification range perfect for varminting, this optic offers good glass, nice controls, and a great warranty — all at an affordable price. And right now you can Save $280 on this Vortex Viper at EuroOptic. This scope features glass-etched EBR-1 reticle in the second focal plane, XD Lens, 30mm main tube, tactical-style turrets, and CRS zero stop.
4. Midsouth — Norma .223 Remington Brass, $99.99 for 250
⏺ Impressive deal on very high quality .223 Rem brass
After Lapua, Norma makes some of the best brass you can buy. And here’s a chance to get a big supply of .223 Rem brass for your High Power or varmint rifle. This 223 Remington brass has very tight tolerances, holds up well to multiple reloads. We have seen very good accuracy with this brass with both light and heavy .224-caliber bullets. The price — $99.99 for 250 cases, works out to $0.39 per case. You can pay up to $0.70 per case for some other premium .223 Rem brass.
⏺ Excellent hard case, $50 savings, great for air travel
This is one of the best large hardshell rifle cases on the market. The Pelican Vault V800 compares well to other hard cases costing up to $350.00 but right now it is just $149.96 at MidwayUSA. Choose Desert Tan or Black. This case will hold two large match rifles securely. It features five layers of customizable foam, along with six (6) push-button latches. This same V800 53″ case sells elsewhere for $219.00, and is normally $199.95 at MidwayUSA. With this deal you save $50.00! Competitors headed to the F-Class Nationals in Raton, NM at the end of the month may want to grab one of these big 53″ cases.
6. Brownells — KRG Bravo Chassis Rem 700, $324.99 with Code
⏺ Versatile internal frame stock for PRS or hunting — tan, black, or green
The Kinetic Research Group (KRG) Rem 700 Bravo Chassis is a good dual-purpose choice for PRS and hunting. There is an internal aluminum frame with polymer exterior in Flat Dark Earth, Sako Green, or black. The stock fits Rem 700 and Rem Clone actions, accepts AICS-pattern mags, and is M-LOK compatible. The 2.9-lb KRG Bravo chassis features adjustable cheek riser and length-of-pull, built-in thumb shelf, plus quick-detach sling-swivel and bipod mounts. The KRG Bravo stock costs $349.99 at Brownells. You can also get $25 Off with Brownells code VSE, lowering the net cost to $324.99.
7. Amazon — Teslong Borescope $44.99 or Rigid Version $79.99
⏺ Teslong borescopes are game-changers — true “must-have” tool
The Teslong digital borescope has been a huge success. This compact, electro-optical, cable-type borescope outputs sharp, high-resolution images and VIDEO to desktop computers and laptops, and many tablets. Check out our Full Teslong Review complete with inside-the-barrel videos. Get the basic version for $44.99 on Amazon or the rigid version Teslong Borescope for $79.99. If you scope your barrels often, you may prefer the rigid version which is easy to insert and rotate.
8. Midsouth — Tipton Gun Butler, $19.49
⏺ Very useful, particularly for regular cleaning, great price
Here’s a handy, portable gun caddy that works well for rifle maintenance chores at home or at the range. Right now the Tipton Gun Butler is marked down to $19.49. The Gun Butler offers a convenient platform for cleaning your gun or doing tasks such as scope mounting. Two removable forks/cradles hold a gun securely in place, while compartments and slots hold solvents, jags, brushes, mops, and tools. The Gun Butler features a convenient carrying handle, and slip-resistant rubber feet.
9. MidwayUSA — Remington Roll-Up Mat Cleaning Kit, $11.77
⏺ Amazing deal — very complete tool set, and great gift item
This is a great portable gun cleaning kit. It’s now a steal at just $11.77, 68% off the regular price. This kit contains 9 caliber-specific bore brushes, 5 various-sized bore mops, patch pullers, a 3-piece cleaning rod, plus a pair of utility cleaning brushes. Heck just all the brushes and mops are worth more than the $11.77 price. This kit also makes a great gift for your shooting buddies or family members who enjoy guns.
Made by the same smart folks that created Wipe-Out™, and Carb-Out™, 
Where to Buy NO-LEAD Lead Remover
When shooting pistols indoors we recommend quality muffs with earplugs underneath, offering double protection. When inside an enclosed range, with other shooters blasting away right next to you, you really need effective hearing protection. But you also need to hear range commands and be able to communicate with your fellow shooters. That’s why we recommend electronic muffs with good foam plugs underneath. That gives you serious hearing protection during live fire, with the ability to hear voices and converse.
Pistol Ammo Hard to Find
