This 4-part video series first guides the new hand-loader through the gear/hardware selection process. Then the videos cover, step-by-step, all the key processes of reloading from start to finish. If you are new to hand-loading, or just want a reloading refresher course, we recommend you watch this 4-part series from Tactical Life, part of the Athlon Outdoors Network.
WARNING!! We have embedded the Videos below. You can watch ALL four videos, but each will play back at the TOP. NOTE: They are all the same for the first 30 seconds, so you may want to skip forward. These videos may play back better if you go to the Tactical Life Website. Access: CLICK HERE.
Learn More in Tactical Life’s The Complete Book of Reloading (2020 Edition)
This publication includes over 2000 handgun and rifle loads. In addition, The Complete Book of Reloading (2020) reviews 8 modern Progressive Presses. Take note — there is a special report on the LabRadar Chronograph. Long-range Hunters will enjoy a feature article on the new 6.5 PRC Cartridge. In the “Handloaders’ Stockpile” a variety of new products to make your hours at the bench more productive are reviewed. The issue also has feature stories on Wildcat Cartridges, Subsonic loads, and .44 Magnum loads for both rifle and pistol. There is a Bonus 33-Page Hodgdon and Alliant Load Data Guide.
Here are some gun-industry news highlights for the week. With the Coronovirus pandemic dominating the news, there have been some important developments. First, we are seeing a huge spike in ammo sales, along with significant growth in gun purchases. Second, groups are fighting State Executive Orders mandating closures of gun stores. Third, a number of gun accessory companies are gearing up to provide health-related products such as N95 masks and disinfectants.
Ammunition Sales Spike with Widespread Concerns Over Coronavirus Pandemic
The National Association of Sporting Goods Wholesalers (NASGW) SCOPE data platform reported a 168% spike in ammunition shipments for the week ending March 14. For all of 2020 so far, ammo shipments are up 21%.
Ammo Sales up 168% Nationwide
During the week ending March 14, distributors shipped close to $10,000,000 worth of ammunition, representing a 168% bump above the 3-year average for the same week. In some states, SCOPE DLX shows up to a 600% growth in ammunition shipments. Overall, ammunition shipments are up 21% year-to-date (YTD).
Gun Sales Rising Significantly
Concerns over the COVID-19 pandemic continue to drive firearms sales as well. According to Chris Means, NASGW Director and President of Tactical Gear Distributors, ammunition was the first category to spike but firearms have been following, with high demand for carry guns are ARs. Firearms shipments were up 13.74% compared to the 3-year average for March 8-14.
About the Data Tracker: NASGW SCOPE is an analytics platform for shooting sports manufacturers, distributors, and retailers. SCOPE DLX collects weekly shipment data from 20 leading distributors that represent demand from FFLs across the United States.
AR15s Are in High Demand Again — Sales are Rising
Gun Industry News — Coping with a Crisis
Legal Challenge to New Jersey Closure of Firearms Dealers
The Second Amendment Foundation has filed a lawsuit challenging New Jersey Governor Phil Murphy’s order shutting down firearms dealers in the Garden State. In Kashinsky v. Murphy, the SAF is joined by the New Jersey Second Amendment Society in alleging violation of “civil rights under color of law” by shutting down firearms dealerships, preventing citizens and businesses from exercising their rights under the Second and Fourteenth Amendments. Federal Judge Judge Shipp has set Friday, April 3 as the deadline for the state’s opposition brief to the SAF’s suit. This important Second Amendment case could have ramifications across the nation.
New York Shutters Kimber Manufacturing Plant in Yonkers NY
In related news, the Kimber Plant in New York state has been closed in response to executive orders. Due to the New York state decision to shutter non-essential businesses as part of the COVID-19 response plan, Kimber Mfg. Inc. has stopped production at its New York facilities. Production continues at Kimber’s new, state-of-the-art Troy, Alabama manufacturing facility.
NOTE: In many other states, firearms and ammunition production facilities, along with retail gunstores, ARE recognized as “essential businesses” and therefore allowed to stay open. For a state-by-state run-down, read the NSSF Covid-19 Information and Resources for FFLs.
Radians Donates 14,000 N95 Masks to TN Hospitals
Radians, manufacturer of quality safety eyewear and hearing protection for shooters and hunters, donated over 14,000 N95 masks to medical facilities in Memphis, TN. Wisely, in 2018 Radians added the N95 respirator to its line of Personal Protective Equipment (PPE). Radians CEO, Mike Tutor, said the N95 mask donation “represents Radians’ corporate responsibility to help during challenging times. With a worldwide shortage of respirator masks, we knew this donation would quickly assist first responders and health care workers [during] the COVID-19 crisis. The respirators will also be of service at COVID-19 test sites.”
Otis Technology Joins the Fight Against COVID-19
Otis Technology has partnered with Saint Lawrence Spirits to make, bottle and distribute hand sanitizer to first responders in desperate need during the COVID-19 pandemic. In addition, Otis Technology began using its facilities — normally used to manufacture firearms maintenance products — to immediately begin manufacturing personal protective equipment.
Right now, due to concerns about personal safety and potential civil unrest, Americans are arming themselves with all types of firearms — pistols, rifles, and shotguns. While plenty of guns are available, in many areas, certain types of ammunition are in short supply — particularly 12ga shotshells and 9mm centerfire ammo. This has lead to price gouging. Some online vendors are charging up to $5 per round for for 12ga buckshot shotshells!
Thankfully, if you shop around a bit, you can still find all types of defensive ammunition at reasonable prices. Everything from .22 Shorts to 12 gauge. For example, Midsouth Shooters has a variety of 12ga ammo for under $0.30 per round. And in most states, it is completely legal to order ammunition online and have it delivered to you at home. CLICK HERE for AmmoSeek 12 Gauge Ammo Listings.
Here’s a great search service that can help you locate hard-to-find ammunition and reloading components — while saving money in the process. AmmoSeek.com monitors more than a dozen online vendors — checking current pricing and available inventory, for pistol, rifle, and shotgun ammunition. Looking for .22 LR ammo for your rimfire trainer or .45 acp ammo for your 1911? Just select the cartridge type from the “Quick Seek” list on the right. Likewise you can find .223 Rem and .308 Win Rifle ammo with one click.
Got Ammo? Here’s just part of the vast inventory at Skagit Arms in Washington State.
Use Ammoseek.com to Find Reloading Components Too
Ammoseek.com also lets you search for reloading components, including powder, primers, brass, and bullets. This is a huge time-saver. You can instantly check a dozen or more vendors to see if a particular type of powder is in stock. Likewise, you can quickly check for primer availability. If you have a big match coming up and are short on primers — this could solve the problem. To search for components, from the AmmoSeek home page, click the gray “Reloading” Tab, then select Bullets, Brass, Primers, or Powder from the pull-down menu.
Great Threat Response Shotgun Deal
Need a serious 12 gauge defensive shotgun? Here’s what may just be the best deal in America right now — the Weatherby Threat Response 12ga Shotgun for just $269.89 at CDNN Sports.
This impressive Weatherby pump-action 12ga shotgun features an 18.5″ barrel, with Fiber Optic front sight and Ghost Ring rear sight. There’s a Picatinny-type rail on top to fit a red dot sight (recommended) or other optic. The Threat Response shotgun holds 5 rounds. With pistol grip stock, good tactical sights, and a rail, this is a great value in a defensive shotgun from a quality company. NOTE: An extension tube (shown in video) can be fitted to increase capacity.
Story Tip by Boyd Allen. We welcome reader submissions.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
This impressive Weatherby pump-action 12ga shotgun features an 18.5″ barrel, with Fiber Optic front sight and Ghost Ring rear sight. There’s a Picatinny-type rail on top to fit a red dot sight (recommended) or other optic. The Threat Response shotgun holds 5 rounds. With pistol grip stock, good tactical sights, and a rail, this is a great value in a defensive shotgun from a quality company. NOTE: An extension tube (shown in video) can be fitted to increase capacity.
2. My Patriot Supply — 4-Week Emergency Food Supply, $197.00
This full 4-Week Emergency Food Supply contains 284 servings — that’s breakfasts, lunches, and dinners for an entire month, with the recommend 2000+ calories per day. All meals are stowed in resealable, heavy-duty, 4-layer pouches. You’ll find 12 food varieties, with up to 25-year shelf life. Patriot Supply also sells a 2-week Food Supply, but that sold out recently.
3. MidwayUSA — Caldwell Rock Front Rest and Bag, $99.99
Here’s a great bargain for someone looking for a basic functional benchrest set-up. This Rest and Bag Combo could be a gift to a family member or a junior shooter. Or this $99.99 combo would suffice for someone testing a hunting rifle. The front rest adjusts for both windage and elevation.
4. Midsouth Shooters — .17 Cal and .22 Cal Rimfire Ammo Sale
Though ammo demand has spiked, Midsouth Shooters has a great selection of rimfire ammunition from top brands: Lapua, SK, CCI, Hornady, Norma, Federal, Winchester, and Aguila. The most popular rimfire cartridge types are in stock at good prices: .17 Mach2, .17 HMR, 22 Shot, .22 LR, .22 WMR. While other vendors are taking advantage of current high demand to raise prices, Midsouth has held the line with very attractive prices, such as Norma 40gr Tactical .22 LR for just $4.41 per box — 9 cents per round.
While Walther makes premium pistols, such as the steel-frame Q5 shown above, Walther also makes good reliable pistols that cost much less than a Glock or Sig polymer pistol. The Walther Creed offers excellent ergonomics, good accuracy, and well-designed controls for just $249.99 at CDNN Sports. This gun, designed to be a value-leader, emulates Walther’s more expensive PPQ model (MSRP $649.00) at a much lower price. The Creed’s frame size and shape is the same as the PPQ, but the Creed lacks interchangeable backstraps. Slide and trigger are very similar.
6. Stocky’s — Rem 700 Composite Stock with Accublock, $99.99
These stocks were the first run of Stocky’s Long Range Composite Sporters. There is nothing wrong with these “factory seconds” except the barrel channels are narrower than current versions, so you may have to open up the barrel channels a bit (simple task). On Sale for $99.99, these are an Amazing Bargain. Designed for Rem 700 and Rem clone actions, these LRC Sporter Stocks are constructed from a high-fiber composite with precision aluminum Accublock® chassis molded into the stock.
7. MidwayUSA — Pelican Vault Rifles Cases, 30% Off
These are quality hard rifle cases. Pelican Vault Series cases feature stout construction, weather seals, and strong locking systems. MidwayUSA was not advertising the price, but when added to a shopping cart (on 3/22/20) the wheeled 53″ V800 case was $139.96 while the non-wheeled 50″ V770 case was $104.96. The wheeled 44″ V730 case was $135.96 in the cart. These Pelican Vault cases feature 5 layers of internal foam and stainless steel lock hasps.
8. Amazon — Custom Damascus Hunting Knife, $59.99
Having a good hunting knife on your hip when you’re out in the field is a necessity. Whether dressing your game, making kindling, or getting out of dangerous situations, the importance of having a good knife can’t be overstated. If you’re looking for new one or maybe a gift for that new young hunter in your life, take a look at this custom Damascus hunting knife complete with leather sheath. It can do a myriad of tasks while looking great with that Damascus steel blade.
9. Amazon — MTM AC4C Ammo Crate with 4 Ammo Boxes, $24.99
Here’s a great product at a great price. The versatile MTM AC4C Ammo Carrier features four lockable polymer ammo cans in a fitted, four-slot 23.5″ x 11.3″ x 7.5″ carry crate. This makes it easy to haul four full ammo cans. Actual purchasers have raved: “Moments after I received this storage box set I ordered another. Very well-built and great design — a steal at the price.” Right now this carrier is on sale at Amazon for just $24.99. The system includes four lockable, O-Ring 11.3″ x 7.2″ x 5″ ammo cans (AC30T) for multi-caliber ammo storage. The crate even includes tie-down points for transport in a cart or ATV. NOTE: Last year this MTM AC4C system sold for $39.99. The current $24.99 price represents a 37% savings!
10. Amazon — Tactical Eyewear Kit, $16.99
Wearing eye protection should be second nature for anyone around firearms for so many obvious reasons. Whether for you, a backup or to have for those shooting with you grab a set of XAegis Tactical Eyewear Kit that come complete with 3 different lenses and protective case. You can easily switch from Gray, to Yellow, to Clear lenses in the frame. This 3-Lens Eyewear Kit is an Amazon #1 Best Seller.
This article is written from California where gun stores are shuttered due to the ordered closure of “non-essential businesses”, as part of the effort to slow spread of the Coronavirus. While there is no outright ban on purchasing a gun in California, from a practical standpoint, the gunshops are all closed now. It’s very difficult to purchase ammo as well. But you CAN buy cannabis (marijuana). Yes, that’s right, California Governor Newsom declared Cannabis Dispensaries (Pot Shops) to be essential businesses. Oh well…
Currently 14 U.S. states have issued Stay-at-Home executive orders. In most locations these orders mandate business shutdowns as part of the “Stay at Home/Shelter in Place” strategies. Some states are closing gun stores, others are not. We think gun stores do provide “essential services” that help Americans defend themselves, their families, their homes, and their property. We applaud Illinois which stated that gun and ammo dealers are “essential businesses” that would NOT be closed as part of the Illinois Stay at Home program.
The National Shooting Sports Foundation (NSSF) is working to ensure that firearms-related businesses are allowed to keep their doors open during these difficult times. The NSSF stated:
[T]he National Shooting Sports Foundation (NSSF) is hard at work for you during this challenging time as the nation faces the COVID-19 pandemic. NSSF is in contact with the White House, Capitol Hill, and the Department of Homeland Security (DHS) advocating that our industry — from manufacturers to distributors to retailers to ranges — be declared by DHS as a “national critical infrastructure industry”. The DHS list is only guidance to states and local governments and does not carry the force of law. Therefore, NSSF is proactively working at the state and local level to advocate that our industry be exempted from any emergency ordinances or orders as “essential businesses”.
For example, through NSSF’s efforts, a proposed city ordnance in Albuquerque, NM, to shutter firearm retailers was defeated. Most recently, in response to NSSF’s efforts, the Governor of Illinois, in his emergency “shelter in place” executive order, declared that firearm and ammunition suppliers and retailers are “essential” and may remain open for business. Please see official statement below:
Supplies for Essential Businesses and Operations (Illinois): Businesses that sell, manufacture, or supply other Essential Businesses and Operations with the support or materials necessary to operate, including computers, audio and video electronics, household appliances; IT and telecommunication equipment; hardware, paint, flat glass; electrical, plumbing and heating material; sanitary equipment; personal hygiene products; food, food additives, ingredients and components; medical and orthopedic equipment; optics and photography equipment; diagnostics, food and beverages, chemicals, soaps and detergent; and firearm and ammunition suppliers and retailers for purposes of safety and security;
The NSSF is also providing guidance for gunshop owners and FFLs. If you operate a sporting goods store or gunshop that sells firearms, you may want to visit the NSSF website, NSSF.org, for guidance on securing your inventory and dealing with increased demand and panic buying.
Here is the view from 9500 feet ASL. The SRS in 7mm Rem SAUM almost outran the Swarovski laser…
7mm RSAUM in a bolt-action bullpup? Yes it works. A talented shooter, who calls himself “ColdboreMiracle” in social media, has a Desert Tech SRS-A1 rifle chambered for the 7mm RSAUM, and it hammers. The 7mm Remington SAUM (Short Action Ultra Magnum) is popular with F-Open competition shooters. It can also work well for long-range hunting and tactical tasks. Learn more about the 7mm Remington SAUM in our 7mm Cartridge Guide.
ColdboreMiracle owns the SRS-A1 “covert” model, which has a shorter handguard than the standard SRS-A1 model shown below. Desert Tech now offers an SRS-A2 model which has an M-LOK handguard and some refinements to the chassis.
Here is a detailed video review of a Desert Tech SRS chambered in .308 Win. You can see a close-up of a 100-yard 5-shot group at time-mark 6:25:
Here is a review of the newer SRS-A2 Covert (shorter model), after 1000 rounds. The reviewer believe the SRS bullpup’s shorter length offers some advantages for precision shooters:
ColdboreMiracle says the bullpup design has many advantages: “The Stealth Recon Scout (SRS) rifle from Desert Tech is a bullpup-configured precision rifle with a shorter length than many carbines. The SRS has a multitude of barrel options that can be swapped in under a minute — all of them come with a 1/2-MOA accuracy guarantee and return to zero. The SRS’s bullpup design puts the rifle’s COG closer to the shoulder, making the rifle balance better off-hand. The straight-line geometry of the SRS makes recoil seem lighter, and barrel hop is reduced, allowing the shooter to stay on target better. It takes a little getting used to, when converting from a traditionally-configured bolt gun. But once you do, you won’t go back.” To learn more about this rifle (and other Desert Tech arms), visit ColdboreMiracle’s Facebook Page and YouTube Channel.
The 7mm RSAUM — Why It Was Chosen for this SRS
ColdboreMiracle explains how he selected the 7mm Rem SAUM chambering for his Desert Tech SRS Bullpup: “I just did a comparison between barrel life, velocity, brass, etc. and came to the SAUM. I can tell you this, if you go with one for your SRS, make sure you use long bullets like the 183 or 195, and seat them long. That will aid in smooth cycling.”
Mr. ColdboreMiracle tested the new generation 183gr Sierra MatchKings (item # 1983). These impressive projectiles are “tipped” at the factory. Claimed G1 BC is a lofty 0.707 (at 2300 fps and above). We have heard other reports that these bullets “hold waterline” exceptionally well at 1000 yards. That indicates the bullet-to-bullet BC is very consistent. No doubt the factory uniforming/pointing of the bullet tips helps in that regard.
As you can see, these 183-grainers shoot well in ColdboreMiracle’s SRS rifle. Here are five shots at 100 yards. That’s very impressive for a tactical-style rifle shot from a field-type bipod.
ColdboreMiracle says: “This is the only reason I need to shoot Sierra bullets. On the right (above) you can see the results of the 183gr SMK from my 7mm SAUM. Five shots at 100. A huge thanks to Mark at Short Action Customs, LLC for [chambering this barrel] for my Desert Tech SRS.”
7mm Remington SAUM — Key Considerations
In some respects, the 7mm SAUM cartridge may be better than the 7mm WSM. The 7mm SAUM holds less powder — but that’s a good thing, since the capacity is more than adequate to do the job. You can drive the 180s at 3000 fps with a SAUM using less powder than with a WSM. Additionally, the SAUM case has a slightly longer neck. This gives you greater flexibility in bullet seating. With a long neck you can set the throat so the long 180+ graing bullets are above the neck shoulder junction, yet you can still seat shorter hunting bullets close to the lands. Additionally, long case necks, some believe, cause less throat erosion than shorter necks. That’s not “hard science” but it is certainly a view shared by many experienced shooters. The long neck is one reason many varminters favor the 6mm Remington over the .243 Winchester.
7mm RSAUM Is More Efficient than 7mm WSM
7mm RSAUM shooter Steven Ikeeda tells us: “I decided that some type of 7mm was the ticket for doing well at 1000-yard matches, especially if one could drive the high-BC bullets at 2900+ fps. Looking over various 7mm cartridges that could produce those velocities (and didn’t require case-forming), I was impressed by the 7mm SAUM and the 7mm WSM. According to the load manuals, the 7mm WSM offered a bit more velocity than the 7mm SAUM. However, to achieve its small velocity advantage, the larger 7mm WSM had to burn 7-10% more powder than the 7mm SAUM. (The 7mm WSM has 81.0 grains of capacity vs. 73.6 grains for the 7mm SAUM.) The SAUM is a very efficient case. It looks like a 6.5×47 Lapua on steroids.”
If you have been waiting to purchase a chronograph… now is a great time to buy. You can get the affordable MagnetoSpeed Sporter for under $158.00. You can set up this device in a few minutes, and you never have to go downrange to fiddle with a tripod or fuss with wires. The MagnetoSpeed Sporter is simple and effective — a no-hassle solution.
See MagnetoSpeed Sporter Chronograph Features Reviewed in Video
We like the Sporter chrono, as do other shooters — this unit is very popular. Like the MagnetoSpeed V3, the Sporter faithfully records shots, even in complete darkness. Shot strings are recorded digitally and can be transferred to a smart phone via MagnetoSpeed’s XFR accessory (and Apps).
The Magnetospeed Sporter offers most of the features of the more expensive models (see chart below for details) and has a updated sensor. MagnetoSpeed says its new Sporter is “Ideal for contoured rifle barrels (sporter barrels) and long-barreled revolvers.” The Sporter Chronograph Kit (shown above) includes: Bayonet Sensor, 3.5 foot Data Cable, Remote Display (with Battery), Strap with thumb nut, Two V-block spacers, and compact storage box.
Q: Will the Sporter Chrono work with thicker barrel (i.e. greater than 1″ diameter)?
A: The manufacturer recommends the $399.00 V3 model for thicker barrels. But, wink-wink, if you have a 1.25″ barrel you can get this to work, based on what we’ve seen.. If you have a really fat barrel (up to 2.0″ diameter), get the V3. Magnetospeed also says the V3 is needed for airguns, shotguns, and muzzleloaders.
Click Image for Full-Screen Photo
The Sporter Chrono attaches quickly and easily. It has a 3.5-foot-long cord, and will work with Muzzle Brakes and Flash-hiders up to 2.7″ long.
This impressive 15-round group was shot by Jim See of Elite Accuracy.
Different Shooting Disciplines Demand Different Levels of Precision/Accuracy
In the rapid-fire 3-Gun game, you could probably “clean” most stages with a 2-MOA rifle. By contrast, in the short-range group benchrest game, to compete with the best, you’ll need a rifle that shoots in the “ones” (i.e. 0.1-0.19 MOA) in perfect conditions. In 1000-yard F-Class competition, the top shooters want a rifle that will hold one-third-MOA of vertical at that distance.
What is your standard of accuracy? How good is “good enough”. Jim See, a skilled gunsmith and successful PRS competitor, recently answered that question for his tactical discipline. For the kind of matches Jim shoots, he likes to have a rifle that will hold half-MOA for five (5) shots, 3/4-MOA for 15 shots, and 1 MOA for twenty shots. Remarkably, Jim’s rifle can do that with factory ammo. Above is an impressive 15-shot group shot with .260 Remington Federal Premium Ammo.
“I say it all the time, my loads need to print 5 under 1/2″, 10 under 3/4″, and 20 under 1″. It’s simple, if a hot barrel will keep 20 rounds fired in succession under my standard it will be a good barrel and load for Precision Match Shooting. Federal Premium Gold Metal Match .260 with Sierra bullets made the cut for me today. 15 consecutive shots under 3/4 MOA.” –Jim See
It’s said that you “can never have too much accuracy”, but there are acceptable standards for each discipline, and they’re not the same. A 100/200 yard Benchrest shooter will be sorely disappointed with a rifle/ammo set-up that can only deliver half-MOA. On the other hand, a PRS competitor like Jim See can achieve great success with a lesser degree of precision. This means you can save time and money. You can run your barrels longer between cleanings, and you don’t have to go “full OCD” when loading your ammo. The PRS shooter does not need to weigh-sort primers, or load powder to single-kernel standards. Proof is the performance. Jim See recently took third place at the Spearpoint Shootout, and he has been a podium finisher at other events. Learn more about Jim’s gunsmithing and training operations at EliteAccuracy.com.
Download This Load Development Target
Jim’s target seemed a bit familiar. AccurateShooter.com created this Diamond and Dot Target a few years back. On each aiming point, there are high-contrast black horizontal and vertical lines for aligning your cross-hairs. The gray circle lets you see the bullet impacts above, without obliterating the red diamond, which is quite useful for precise aiming (we put fine cross-hairs on the points of the diamond). This target sheet includes data entry tables below each of the three aim points. There are many other free targets out there, but this format is very popular. We’re pleased to see Jim using it. You can download this and dozens of other FREE Targets from the AccurateShooter.com Target Page.
This custom war wagon hauls varmint hunters around the Longmeadow Game Resort in Colorado.
Winter is behind us — it’s officially Spring. Today, March 19, 2020, is the Vernal Equinox, the official start of Spring. For many shooters, the coming of Spring means that it’s time to head out to the varmint fields. Here are eaidht items that can help ensure successful spring varmint adventures.
Eight Great Products for Varmint Shooters
1. BarrelCool In-Action Fan
Busy Varmint shooters may expend hundreds of rounds in a day. That’s tough on barrels. One way to extend your round count is to use the ingenious BarrelCool device. This little yellow gadget fits in your action with a blower tube that goes into the chamber. A small electric fan blows cooling air through the barrel. It really works — folks who’ve purchased the Barrel Cool and run temp strips on their barrel say the BarrelCool can significantly reduce the time it takes to cool down a hot barrel.
In the past, folks have tried various methods to cool barrels: water flushed through the bore, CO2 tanks, even battery-operated fish pumps. BarrelCool is a simpler, less costly, and much handier solution. Priced at $36.99, this small device can potentially can save you money by extending barrel life. To see how Barrelcool works, visit BarrelCool.com. There you’ll find video demos of BarrelCool units in both bolt-action and AR-type rifles.
2. Uncle Bud’s Bulls Bag Sandbag
On most varmint hunts we spend most of the time shooting from a portable bench with a pedestal-type rest (we like the SEB Mini). But it’s nice having a big, heavy X-Type sandbag rig also. These four-chamber designs, such as the Uncle Bud’s Bulls Bag, allow shooting from a truck hood or any flat surface. Some rifles with narrow fore-ends really benefit from the firm “hug” provided by these “butterfly” style sandbags. We like the 15″ Uncle Bud’s Bulls Bag, currently $71.99 at Brownells. Durable and well-made, it will provide years of service. There is also a 10″ version that is easier to carry. Forum member Stoner24mkiv likes a Bulls Bag for shooting from a vehicle. He also suggests: “[take] an adjustable bipod if you are going to do any walking. Have a fanny pack or backpack for extra ammo, water, bore-snake, etc. when you go on your walkabouts. Bring a Boonie hat for blocking the sun, sun glasses, sunscreen. High leather boots.”
3. Scope with Built-In Laser Rangefinder
The Burris Eliminator III is an impressive piece of electro-optical technology. With a push of a button, a built-in laser rangefinder senses the distance to your target and the Eliminator’s microprocessor instantly calculates the required hold-over based on your load’s ballistics. The calculated aiming point is then displayed in the reticle with an illuminated red dot on the vertical cross-hair. Just put the red dot on the target and make the shot. Easy as that. If you are working a large prairie dog field and constantly moving near to far and back again, this scope is really handy. Laze, adjust aim with the dot, and squeeze the trigger. Its that simple. We’ve used this scope out to 500 yards on small steel targets and it worked flawlessly.
4. Hornady 17 HMR V-Max 500 Round Brick, $89.99
For those distant prairie dog shots, you’ll want a centerfire round such as a 22 BR/BRA or 22-250. However, for closer work, or for smaller varmints such as ground squirrels, the 17 HMR is hard to beat. There are many good factory rifles chambered for the 17 HMR, such as the Savage A17. Right now Midsouth has a Hornady 17 HMR brick of 500 for a low price of $89.99. That works out to just 18 cents per round — cheap enough that you can blast sage rats all days long and never worry about running out of ammo.
5. Stick-On Temp Strips Monitor Barrel Heat
You never want your barrel to get too hot. Accuracy suffers when barrels over-heat, and excessive heat is not good for barrel life. So how do you monitor your barrel’s temperature? You can check if the barrel is “warm to the touch” — but that method is not particularly precise. There is a better way — using temperature-sensitive strips. McMaster.com (an industrial supply house) offers stick-on temp strips with values from 86° F to 140° F. A pack of ten (10) of these strips (item 59535K13) costs $12.77 — so figure it’ll cost you about $1.28 per barrel for strips. That’s cheap insurance for your precious barrels. For best barrel life, try to stay under 120 degrees F.
6. Low-Fouling Power for High-Volume Varmint Loads
For high-shot-count varmint safaris, you want a clean-burning powder that minimizes barrel fouling. While there are many great powders for the .223 Rem, we like Hodgdon CFE 223 for our high-volume varmint loads. This powder really seems to keep barrels cleaner. Originally developed for U.S. rapid-fire military systems, CFE 223 incorporates a proprietary chemistry named “Copper Fouling Eraser”. Based on tests with extended shot strings, Hodgdon claims that, by using CFE™223, match shooters, varmint hunters, and AR shooters can maintain accuracy for longer periods, with less barrel-cleaning time.
7. Bog Pod SB-2 Sportsman’s Bipod (21″-40″)
If you’re looking for a versatile, stable and easy-to-carry field support, check out the latest BOG-POD Series SB-2 Bipod. Featuring 21″-40″ adjustable legs, the BOG-POD Bipod can be used while sitting, standing, or kneeling. This kid of support is highly recommended for shooting on hills where a conventional bipod doesn’t offer enough elevation. This unit has a 360° swivel head and the legs adjust independently out to a 60-degree angle with adjustable tension to ensure maximum accuracy. Right now you can get this SB-2 Bipod for just $19.99 on Amazon — a great deal.
8. Motorola T100 Talkabout Radios
When you’re in the varmint fields, its essential to have good communications with your fellow shooters. You can’t count on cell coverage in the hinterlands so we recommend a good pair of Walkie-Talkies. The Motorola T100s have a very impressive range (up to 16 miles in ideal conditions), yet cost just $21.99 for the pair. These 22-Channel T100 Talkabouts will run up to 18 hours on three AAA batteries. Users have been very pleased with this inexpensive handheld radios.
While Varget and Reloder 15 remain in short supply, you can often find IMR 4320 powder back in the shelves of local gun stores. IMR describes IMR 4320 as follows: “Short granulation, easy metering, and perfect for the 223 Remington, 22-250 Remington, 250 Savage and other medium burn rate cartridges.” This older-generation powder isconsiderably more temp sensitive than the Hodgdon Extreme propellants, but in the right application, it looks to be a viable alternative for folks who can’t source Varget, Reloder 15, and even H4895.
IMR 4320 Shoots Well in the .308 Winchester
A while back, GS Arizona wrote an excellent Riflemans Journal article, IMR 4320 — the Forgotten Powder. GS developed IMR 4320 loads for his .308 Win Palma rifle and competed with IMR 4320-powered ammo at long range matches. He concluded that: “[IMR 4320] appears to be a very useful alternative to some of the harder-to-get powders. The load is working extremely well at 1000 yards. In the [2009] Arizona Palma State Championship, several high-placing competitors were using the 4320 load. We got sub X-Ring elevation at 1000 yards from several rifles, and that’s all I’m looking for in a Palma load.”
IMR 4320 Works for Dasher Shooter
Forum member FalconPilot shoots a 6mm Dasher with Berger 105gr Hybrids. Looking for an alternative to Varget, he decided to give IMR 4320 a try. The results were good. FalconPilot reports: “I’ve been looking for other options (besides Reloder 15, which I love, but it’s really dirty). While at a gun shop in Ohio, I ran across 8 pounds of IMR 4320. I had never even heard of it, much less tried it. Getting ready for upcoming mid-range shoots, I loaded five rounds with IMR 4320 to the exact same specs as my winning Varget loads for the 6mm Dasher. This recipe was 32.7 grains of powder, Wolf SMR primer, Berger Hybrid 105 jumped fifty thousandths.” Falcon pilot tested his IMR 4320 load at 600 yards:
As you can see from the photo at the top of this article, FalconPilot had good results — a 1.5″ group at 600 yards. He reports: “This group was shoot during the middle of the day, mirage bad, scope set to 25X. It looks like IMR 4320 is a [very close] replacement for Varget… with a tad bit slower burn rate.” FalconPilot tell us the accuracy with IMR 4320 rivals the best he has gotten with Varget: “This gun has always shot under 2 inches [for 5 shots] at 600 yards, and most of time shoots 1.5 to 1.7 inches.”
For comparison purposes, here are Heat of Explosion and Burn Rate values from QuickLOAD for IMR 4320, and for the popular Reloder 15 and Varget powders. You can see that these powders have similar characteristics “by the numbers”:
Manufacturer
Powder Brand
Heat of Explosion
Burning Rate Factor
IMR
4320
3890
0.5920
Alliant
Reloder 15
3990
0.5200
Hodgdon (ADI)
Varget
4050
0.6150
WARNING — When changing from one powder to another, always start with manufacturer’s stated load data. Start low and work up incrementally. Never assume that loads will be equivalent from one powder to another, even powders with similar burn rates.
What Other Forum Members Say:
I was using IMR 4320 in the mid 70s in my .222 Rem. Darned great powder and I never had a load that was not accurate from the .222 to .30-06 with that powder. — 5Spd
A fine powder overshadowed by the nouveau wave of “gotta have the newest — make me a better shot” powders. Try 4320 in a 22-250 — what a well-kept secret! IMR 4320 meters very well and is a flexible alternative to many of the hard-to-find powders so much in demand. — AreaOne
IMR 4320 was my “go to” powder in my .223 for many many years. This powder and Winchester 55gr soft point bulk bullets (the cheapest bullet I could buy at the time) accounted for thousands of prairie dogs, coyotes, and anything else that needed shooting. I still use IMR 4320 in some .223 loads and am very happy with it still. — pdog2062
I’ve been using it in a .308 Win for several years. I think it is very sensitive to temperature and always waited till the last minute to load my ammo with a close eye on the weekend forecast at the range. IMR 4320 Works pretty good for 155gr Palma and 168gr Hybrid [bullets] in my .308. — JayC
IMR 8208 XBR is also good — if you can find it
Another good substitute for Varget powder in a .223 Rem or .308 Winchester is IMR 8208 XBR. In our own .308 Win tests, this generated slightly more velocity than Varget, with good ES/SD. However, this very good IMR 8208 XBR powder is out-of-stock at many vendors.
Learn More in Tactical Life’s The Complete Book of Reloading (2020 Edition)
Ammunition Sales Spike with Widespread Concerns Over Coronavirus Pandemic
In some respects, the 7mm SAUM cartridge may be better than the 7mm WSM. The 7mm SAUM holds less powder — but that’s a good thing, since the capacity is more than adequate to do the job. You can drive the 180s at 3000 fps with a SAUM using less powder than with a WSM. Additionally, the SAUM case has a slightly longer neck. This gives you greater flexibility in bullet seating. With a long neck you can set the throat so the long 180+ graing bullets are above the neck shoulder junction, yet you can still seat shorter hunting bullets close to the lands. Additionally, long case necks, some believe, cause less throat erosion than shorter necks. That’s not “hard science” but it is certainly a view shared by many experienced shooters. The long neck is one reason many varminters favor the 6mm Remington over the .243 Winchester.
While Varget and Reloder 15 remain in short supply, you can often find IMR 4320 powder back in the shelves of local gun stores. IMR describes IMR 4320 as follows: “Short granulation, easy metering, and perfect for the 223 Remington, 22-250 Remington, 250 Savage and other medium burn rate cartridges.” This older-generation powder is considerably more temp sensitive than the Hodgdon Extreme propellants, but in the right application, it looks to be a viable alternative for folks who can’t source Varget, Reloder 15, and even H4895.
