At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. March Optics — Retirement Sale, 30% Off All Scopes in Stock
March Optics delivers some of the most advanced (and unique) optics technology on the planet. But those top-of-the-line March scopes were always a big investment. But now, you can get superb, ultra-premium March scopes for 30% Off. Shiraz Balolia, President of March Optics USA, has decided to stop retailing optics. As a result, March scopes are now being discounted 30% — that’s a huge savings. This sale pricing applies to ALL March scopes, limited to stock in hand. Here are some of the deals:
1. Genesis Extreme Long Range Scope, $4865.00 (marked down from $6950.00) 2. 10-60x56mm High Master Tactical Turrets MTR-1, $2765.00 (marked down from $3950.00) 3. 8-80x56mm Tactical Turrets MTR-4, $2572.50 (marked down from $3675.00) 4. 5-40x56mm FFP Tactical Turrets FMA-2, $2572.50 (marked down from $3675.00) 5. 3-24x52mm FFP Tactical Turrets Illuminated FML-T1, $2572.50 (marked down from $3675.00) 6. 2.5-25x52mm Tactical Turrets Illuminated MTR-3, $2572.50 (marked down from $3675.00)
2. EuroOptic — Mauser M18 Rifles 30% Off (Great Deal)
A huge shipment of Mauser M18 rifles is en-route to EuroOptic from Germany. In preparation for this rifle influx, EuroOptic has slashed prices on all M18s. Expect to save $200 to $250 per rifle. For example, the 6.5 Creedmoor M18 is marked down from $699 to $499 (save $200) while the .243 Win M18 is discounted from $699 to $459 ($240 savings). Eight chamberings will be available including the new 6.5 PRC as well as hunting classics like the .270 Win, .308 Win, .30-06 Springfield, and 7mm Remington Magnum. The Mauser M18 is a fine European-crafted rifle with a 3-lug bolt, smooth 60° bolt lift, and quality hammer-forged barrel. NOTE: Pending arrival, EuroOptic is taking back-orders which are effectively “pre-orders”.
3. Midway USA — Norma 6.5 Creedmoor Brass, 250 for $99.99
The 6.5 Creedmoor is more popular than ever but like any super-trendy cartridge, supplies seem to be either out of stock or too expensive. If you have a 6.5 Creedmoor, check out this killer deal. You can get 250 Norma 6.5 Creedmoor cases for only $99.99. That works out to just forty cents per case — less than half what you’d pay for some other 6.5 Creedmoor brass. We can’t remember the last time we’ve seen such a great deal on quality brass for such a popular cartridge. But you better act soon — we expect this MidwayUSA deal to sell out quickly.
We love our .45 ACP pistols, and we regularly shoot CCI Blazer Brass .45 ACP ammo. It has proved accurate and super reliable. Right now Natchez is offering a great deal — 500 230gr FMJ rounds for just $144.99, a $35.00 savings. Add a box or two of rimfire ammo to put your order over $150.00, then use CODE FH190621 during checkout and and you’ll qualify for FREE HazMat!
5. Midsouth — Rock Chucker Reloading Kit and Free Die, $269.49
Everything you see above can be yours for just $269.49. Amazing Deal. Right now, Midsouth is selling the Rock Chucker Supreme Master Reloading Kit for $269.49, a fine price considering all the hardware you get: Press, Primer Tool, Scale, Powder Measure, Loading Tray, Reloading Manual and more. Heck, the Rock Chucker press alone is worth $165.00+. This is good starter kit for any reloader with sturdy items, such as the Rock Chucker, that will last a lifetime. And now through 7/7/2019 you’ll get a free RCBS FL die set as a bonus. NOTE: This FREE DIE set is offered through RCBS and will ship separately after you submit a form.
6. Amazon — Plano 52″ Double Rifle Case with Wheels, $99.99
This Plano Double Scoped Rifle Case is an Amazon #1 Best Seller for good reason. It offers the functionality and durability of an SKB-type hard case for HALF the money. This is just $99.99 with FREE Shipping, while the equivalent SKB is around $240.00, so you can buy two Planos for the price of one SKB. The 51.5″ interior will fit most scoped competition rifles up to about 29″ barrels (measure your own rifle to make sure). If you separate the barreled action from the stock you can transport even ultra-long ELR rifles. The handles are convenient and beefy and the wheels make this case easy to move. This is a very tough, roomy case for the money — plus there’s Free Shipping! There is also a smaller 42″ version for $64.99.
Exterior Dimensions: 53.5″ x 17″ x 7″
Interior Dimensions: 51.5″ x 14″ x 5.5″
Pluckable Interior Dimensions: 46″ x 10″
Features: Wheels, Secure Latches, O-Ring Seal, Pressure Relief Valve, Customizable Foam
7. Taurus G2c 9mm — $179.99 with Factory Rebate
This is a good little gun at a great price. Taurus has a factory Rebate through 7/7/19. Palmetto State Armory is selling the sub-compact Taurus 9mm with black frame and stainless steel slide for just $209.99 with FREE Shipping. But the Taurus $30 Factory Rebate lowers your price to just $179.99 for this G2c. Or, if you like the milspec look, you can also get an OD-Green G2c G2c for $184.99 after rebate, just $5.00 more. Despite its small size, the G2c has a 12-round magazine. We like the fact it has a left-side manual safety (unlike the Glock).
8. Graf’s — Platinum Case Prep & Trim + EZ Tumbler, $179.99
If you want to step up your brass preparation game, here’s a great deal. Graf’s is offering the Frankford Arsenal Case Prep & Trim PLUS the EZ Tumbler for only $179.99. That’s an amazing deal considering you could pay $199.99 or more for the Prep & Trim unit by itself, and the EZ Tumbler is regularly $50 or more. This Grafs.com combo deal represents a savings of nearly $70.00.
9. Powder Valley — Alliant and CCI Factory Rebates
Powder Valley notified us about some great Rebate offers from Alliant and CCI. If you need powder or primers, now is a great time to buy — this offer ends June 30, 2019! NOTE: These rebates are separate programs. To qualify for these rebates you need to buy at least 4 pounds of Alliant powder OR spend at least $100 on CCI components. You can’t mix and match to qualify — each program has its own minimums.
ALLIANT Powder — More Bang for your Buck$ Rebate
If you buy at least four (4) pounds of powder you get $2.00 back per pound, with a rebate limit of $20 (for ten pounds). Minimum purchase four (4) pounds required.
CCI — Primed for Action Rebate
Spend at least $100 on CCI® reloading primers to get 20% of the purchase price back. Rebate amount calculated on purchase price only, does not include taxes and/or shipping/handling fees. Maximum rebate $100 per person or household. Minimum spend $100 required.
10. Amazon — NcStar Vism Shooting Mat, $24.99
Looking for a good mat at a great price? For $24.99 now you can grab this NcStar Vism shooting mat. This has decent padding, and reinforced areas for elbows and knees. Full dimensions are: 69″ Long x 35″ Wide. This mat has straps for pre-loading your bipod. When you’re done simply fold in the edges, roll it up into a compact 19.50″ W x 8.50″ H package — about the same size as a sleeping bag. You can pay twice as much for a shooting mat and not get much more quality. Purchaser reviews have been very positive. This mat has earned 80% Five-Star buyer ratings on Amazon.
Want to see the details?CLICK HERE to view full-screen photo.
Five targets, each with FIVE shots in essentially one hole. The events of this story happened two years ago. We are reprising our report because this five-target Aggregate arguably represents the most impressive feat of 100-yard accuracy in the history of marksmanship on this planet.
Check out those five targets. The Aggregate (average) of all five targets is a tiny 0.0840 inches! These were shot by Gary Ocock at 100 yards in a California benchrest match on August 6, 2017. Though Gary’s 0.0840 Agg beats existing records, this was not a “sanctioned” match, so Gary’s killer Agg will NOT be submitted for IBS or NBRSA records. So, sadly, the Agg won’t appear in the record books, but this remains a spectacular, verified feat of rifle accuracy, accomplished in competition.
The argument can be made that this is the Most Accurate Gun Ever Built. As far as we can determine, no one has ever shot a smaller 5-target Agg anywhere, at any time.
The Unlimited Benchrest Record That Will Never Be (Official)
Report by Boyd Allen
Gary Ocock’s stunning unlimited Aggregate is beyond amazing. That’s an average of five, 5-shot groups of .0840. Shot under sanctioned match rules, but at an unsanctioned 100-yard fun match, this Aggregate is well under the current 100-yard official records of the IBS (.1386), and the NBRSA (.1242). The fourth of the five groups measured a minuscule .018, less than half the size of the existing NBRSA Unlimited record of .049 (also shot by Gary). Check it out:
When the top 15 shooters all post teen Aggs, conditions must be pretty favorable. However there were some light switchy winds — Gary said that he shot better in the left to right condition.
GUN SPECIFICATIONS
Ocock’s red Jay Young Unlimited Railgun features one major difference from Young’s typical Railgun designs. The bottom of the barrel block is integral with the top (moving part), of the gun. The barrel is Ocock’s usual 1:13.5″-twist Krieger chambered for the 6 PPC. The BAT Neuvo action* is unusual in that its lugs are horizontal at lock-up instead of the usual vertical. With horizontal lugs, both lugs maintain contact with their abutments when the action is cocked. In the more normal configuration when cocked the top lug is forced off of its seat by a combination of the angle of the trigger cocking piece interface, the pressure of the striker spring, and bolt clearance at the rear of the action.
LOAD SPECIFICATIONS
Gary shot this remarkable Agg with well-used brass, Vihtavuori N133 powder, and self-made 66gr BT bullets** seated at “jam”. This amazing Agg was shot on the second day of a 2-day Unlimited Benchrest match. On Day 1 Gary had experimented with various loads using both surplus IMR 8208 and Vihtavuori N133, but was not satisfied with the results. For his first group on Day 2, Gary tried a light load of N133. After seeing the result, however, he decided to go to the other extreme — a super stout N133 load — with the same powder. As you can see, Gary’s willingness to experiment paid off.
Notably, Gary used light neck tension. Ocock found that for these bullets and this barrel, light neck tension worked best (contrary to “normal” N133 benchrest practice). Ocock used a bushing that only produces .001″ difference between the diameters of sized and loaded case necks.
Comment on Ocock’s Achievement
Congratulations to Gary Ocock for superb shooting (and smart loading). Even though the match was not sanctioned (so the Agg will never be a record), Ocock has raised the bar very high, and given us a new standard of ultimate accuracy.
Though this 0.0840 Aggregate and 0.018 group will never go into the record group, they are still noteworthy. There’s virtually no doubt that they would have survived inspection by any record committee. Except for the lack of fixed backers, an IBS requirement (for detecting cross-fires), all other conditions were met for an officially-sanctioned match.
*The new BAT Neuvo actions are the result of a collaboration between Dwight Scott, and Bruce Thom, featuring Dwight’s ideas and BAT’s proven manufacturing expertise.
** Ocock shot his own, boat-tail match bullets, made with George Ulrich-crafted dies using Hood cores. Although he said that it had been a while since he had weighed any, his best guess was that they weigh something around 66.5 grains.
by Sierra Bullets Ballistic Technician Paul Box
One thing that plays a major role in building an accuracy load is neck tension. I think a lot of reloaders pretty much take this for granted and don’t give that enough thought.
So, how much neck tension is enough?
Thru the years and shooting both a wide variety of calibers and burn rates of powder, I’ve had the best accuracy overall with .002″ of neck tension. Naturally you will run into a rifle now and then that will do its best with something different like .001″ or even .003″, but .002″ has worked very well for me. So how do we control the neck tension? Let’s take a look at that.
First of all, if you’re running a standard sizing die with an expander ball, just pull your decapping rod assembly out of your die and measure the expander ball. What I prefer is to have an expander ball that [can give] you .002″ in neck tension [meaning the inside neck diameter is about .002″ smaller than the bullet diameter after passing the expander through]. If you want to take the expander ball down in diameter, just chuck up your decapping rod assembly in a drill and turn it down with some emery cloth. When you have the diameter you need, polish it with three ought or four ought steel wool. This will give it a mirror finish and less drag coming through your case neck after sizing.
Tips for Dies With Interchangeable Neck Bushings
If you’re using a bushing die, I measure across the neck of eight or ten loaded rounds, then take an average on these and go .003″ under that measurement. There are other methods to determine bushing size, but this system has worked well for me.
Proper Annealing Can Deliver More Uniform Neck Tension
Another thing I want to mention is annealing. When brass is the correct softness, it will take a “set” coming out of the sizing die far better than brass that has become to hard. When brass has been work hardened to a point, it will be more springy when it comes out of a sizing die and neck tension will vary. Have you ever noticed how some bullets seated harder than others? That is why.
Paying closer attention to neck tension will give you both better accuracy and more consistent groups.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Midway USA — Norma 6.5 Creedmoor Brass, 250 for $99.99
The 6.5 Creedmoor is more popular than ever but like any super-trendy cartridge, supplies seem to be either out of stock or too expensive. If you have a 6.5 Creedmoor, check out this killer deal. You can get 250 Norma 6.5 Creedmoor cases for only $99.99. That works out to just forty cents per case — less than half what you’d pay for some other 6.5 Creedmoor brass. We can’t remember the last time we’ve seen such a great deal on quality brass for such a popular cartridge. But you better act soon — we expect this MidwayUSA deal to sell out quickly.
2. Grafs.com — FREE Litz Book with $100 Lapua Bullet Buy
This is just one example. This deal works with ANY Lapua bullets purchased from Grafs.com.
Lapua makes great bullets. Bryan Litz writes great books. And now you can get both with this special promotion from Graf & Sons. Here’s the deal — if you buy at least $100.00 worth of Lapua bullets at Grafs.com, you’ll get a free Applied Ballistics book authored by Bryan Litz. You can mix and match any types of Lapua bullets — as long as the bullet order totals $100.00 or more. The book may be one of various Litz titles, such as Modern Advancements in Long Range Shooting or Ballistic Performance of Rifle Bullets. NOTE: You do NOT get to pick the book title — you get what’s available. You want to move quickly on this deal — books are limited to supply on hand.
3. EuroOptic — FREE Kestrel 3500 with Leupold Mark 5HD Scope
Leupold’s new Mark 5HD scopes are impressive. Make no mistake — Mark 5HDs are fine tactical optics fully capable of winning PRS/NRL matches. Available in 3.6-18x44mm, 5-25x56mm, and 7-35x56mm with a multitude of reticle choices, there’s something for every tactical shooter out there. And right now when you buy any Laupold Mark 5HD scope from EuroOptic.com you get a FREE Kestrel 3500NV, a $269.00 value. That’s a fantastic bonus! The FREE Kestrel will be added to your cart automatically at no extra cost.
4. Natchez — Weaver T-Series XR 36x40mm, $389.99
With so many zoom scopes on the market it’s easy to forget some of the best fixed power scopes out there. Weaver T-Series scopes have served benchrest shooters for decades and the new side-parallax Weaver XRs take the T-Series to a new level. You can pick up the Weaver T-Series 36x40mm XR Scope for the crazy low price of $389.99.(This has FCH with 1/16 MOA dot reticle.) You can also grab the 46X version for $569.99 or the Classic T-Series 36X with front objective parallax for just $329.99. All choices are great bargains.
5. Midsouth — Hornady 123gr 6.5mm bullets, 250 for $59.99
We featured 6.5 brass this week and here’s the matching bullet deal. You can grab 250 Hornady 123gr 6.5mm bullets for just $59.99. That’s a mere twenty-four cents per bullet! The 120-130gr class of 6.5mm bullets is an excellent choice for both paper-punching and PRS. These Hornady 123-grainers offer good accuracy with less recoil (and much lower cost) than the 140-145gr class of 6.5mm match bullets.
6. Federal 20% REBATE for Bullets, Brass, and Primers
Reloading component costs add up quickly which is why we include this great rebate offer from Federal. Just purchase at least $100 worth of Federal reloading components (bullets, brass, and primers) and then fill out this form and you’ll get 20% back up to $100. The bottom line is that if you need any components, this is the time to stock up. NOTE: This Federal Rebate also applies to components purchased from other vendors such as Bruno’s, Midsouth, and Powder Valley.
7. Midsouth — Rock Chucker Supreme Reloading Kit, $269.49
Everything you see above can be yours for just $269.49. Amazing Deal. Right now, Midsouth is selling the Rock Chucker Supreme Master Reloading Kit for $269.49, a fine price considering all the hardware you get: Press, Primer Tool, Scale, Powder Measure, Loading Tray, Reloading Manual and more. Heck, the Rock Chucker press alone is worth $165.00+. This is good starter kit for any reloader with sturdy items,such as the Rock Chucker, that will last a lifetime. NOTE: This is listed at $299.99 on the Midsouth Home Page, but the product page now shows $269.49 and that’s what shows when you add the Kit to your shopping cart.
8. Area 419 — Master Funnel Kit, $90.00
Precision loading often requires dropping powder one case at a time and without the right gear this can cause issues. Bad powder funnels can cause bridging or stuck kernels leading to light loads in one case and heavy in another. These issues can be solved using the Master Funnel Kit from Area 419. This kit contains 6 caliber specific color coded heads (22 cal, 6mm/243, 6.5mm/264, 7mm/284, 30 cal, 338 cal) plus the funnel and stand. The funnel is specially designed to ensure powder doesn’t bounce out and the heads are securely threaded and designed to fit snugly on the shoulder of the brass. If you’re looking to upgrade your gear to the top of the line this is the one to get.
9. Amazon — Tipton Gun Butler, $23.49
Here’s a handy, portable gun caddy that works well for rifle maintenance chores at home or at the range. Right now the Tipton Gun Butler is marked down to $23.49. The Gun Butler offers a convenient platform for cleaning your gun or doing tasks such as scope mounting. Two removable forks/cradles hold a gun securely in place, while compartments and slots hold solvents, jags, brushes, mops, and tools. The Gun Butler features a convenient carrying handle, and slip-resistant rubber feet. NOTE: The front cradle may not work well with wide benchrest fore-ends.
This is just one example. This deal works with ANY Lapua bullets purchased from Grafs.com. You can mix and match, as long as you buy at least $100 worth of Lapua bullets.
Lapua makes great bullets. Bryan Litz writes great books. And now you can get both with this special promotion from Graf & Sons. Here’s the deal — if you buy at least $100.00 worth of Lapua bullets at Grafs.com, you’ll get a free Applied Ballistics book authored by Bryan Litz.
You can mix and match any types of Lapua bullets — as long as the bullet order totals $100.00 or more. The book may be one of various Litz titles, such as Modern Advancements in Long Range Shooting or Ballistic Performance of Rifle Bullets. NOTE: You do NOT get to pick the book title — you get what’s available. You want to move quickly on this deal — books are limited to supply on hand.
If you order now, you can get the bullets to shoot, and give the book to Dad for a late Father’s Day gift.
Lapua Bullets — Accuracy & Consistency If you haven’t tried Lapua bullets yet you should. The Scenar-L bullets we have tested have proven extremely consistent in weight and base-to-ogive measurement.
And they shoot. We have a couple rifles that prefer Scenars over all other match bullets we have tried. We have won club matches with the 6mm Scenar-L 105s in a 6mmBR, while the 6.5mm 123gr Scenar and 136gr Scenar-L work superbly in our 6.5 Creedmoors.
Ace tactical shooter and gunsmith Jim See of Elite Accuracy LLC recently tested a Frankford Arsenal rotary brass tumbler. Like the older Thumbler’s Tumblers, this can tumble your cases in a liquid solution. The wet-tumbling process worked very well Jim reports. Posting on Facebook, Jim noted: “I was super impressed with the Frankford Arsenal rotary tumbler and cleaning packs they sent me. I ran 350 pieces of brass for one hour. They now look great.” Jim appreciated not having to deal with dry tumbling media, such as crushed walnut shells. Dry media produces dust and can leave residues or clog flash-holes.
Interestingly, Jim recommends you try wet-tumbling WITHOUT using stainless media. At least give it a try. Tumbling without media simplifies the process and you don’t have to worry about pins stuck in flash-holes or case-necks*. Jim reports: “Stainless steel pins come with the Frankford kit, but mine hit the trash right out of the box. There is no need to clean the inside of your cases 100% and that’s all the pins add to the equation. The brass bumping brass with hot water and Frankford’s liquid cleaner works great all by itself.” One wag stated: “That’s great to hear. Stainless steel pins are a PITA.”
Other Facebook posters concurred with Jim’s evaluation of the Frankford Arsenal Rotary Tumbler:
“I’ve had one for a couple years, and it works well. I usually run about 250-300 Dasher cases at once in it. But I use the pins because I’m OCD about clean brass.” — David W.
“I’ve had one for a year and a half and it definitely works with or without pins.” — Luke C.
“I got one about six months ago and have yet to use any SS media. I just use some dawn, distilled water, and Lemi Shine®. Turns nasty 5.56 range brass bright and shiny.” — Brian D.
“I don’t use the pins either and use a combination of Dawn soap and Lemi Shine.” — Jon N.G.
This video shows how to assemble and operate the Frankford rotary tumbler. But note, Jim See does NOT feel that it is necessary to use stainless media.
How to Dry Your Brass — Hair Dryer Vs. Machine
The downside of wet tumbling is that you end up with a pile of wet brass at the end of the cleaning cycle. There are many ways to dry brass, from drying in the sun to using a kitchen oven (be careful not to “overcook” your brass). One Facebook poster asked Jim: “What is your drying method for wet brass, and how long does it take?”
Jim See replied: “To start I just drain off the dirty water, and rinse the brass with clean hot water. Then I roll the brass on a towel for 30 seconds and put the brass in a one-gallon bucket. Next I insert a hair dryer in the bucket (with the brass) and let it run for about 5 minutes. With this procedure, the drying process for me is done in less than 10 minutes.”
Jack Lanhart has another method: “I use a food dehydrator. It takes 30 to 45 minutes.”
For those who don’t want to mess with towels and hair dryers, Frankford Arsenal offers a matching Platinum Series Case Dryer that simplifies the process of drying brass. Lyman also makes an excellent Cyclone Case Dryer. Both drying machines cost about $60.00 and both have multiple levels so you can separate different types of cartridge brass. Lyman states that “The forced heated air circulation of the Cyclone will dry your brass inside and out within an hour or two, with no unsightly water spots.” The Lyman dryer can also be used for ultrasonically-cleaned gun parts.
*The Frankford Rotary tumbler does include media separators if you choose to use the provided pins or other media. CLICK HERE for diagram showing how to use media separators.
Here’s a feel-good story. ELR ace Paul Phillips took his 9-year-old daughter Addison to the range this past weekend, to try shooting at 1000 yards. Guess what, Addison got hits at 1000! That’s impressive enough, but get this, Addison made those shots with a .22 LR rimfire rifle! Yes a .22 LR will fly that far — but it took a whopping 342 MOA of elevation and five seconds of flight time.
Paul says: “So proud of my 9-year-old making impact at 1000 yards with her .22 rimfire. My 82-year-old dad also got hits at 1000. Amazing!” Paul adds: “My daughter is very excited to get into shooting sports. The .22 ELR game is very fun for her especially shooting suppressed subsonic. It helps her to learn the fundamentals without flinching.” After her success at 1000 yards, the little lady then made multiple hits on a silhouette at 322 yards (see below).
After Addison checked the ELR box at 1000 yards, she tried a 322-yard steel silhouette target. No problem — after many hits in the center, she put three into the top without any misses. This little girl can shoot!
The rifle features a Vudoo Gun Works rimfire action bedded in McMillan A6 stock by Alex Sitman. The barrel is a 20″ Bartlein, fitted with a GSL Technologies suppressor (see second photo above). On top is a Nightforce ATACR 7-35x56mm F2 scope fitted with a TACOM Charlie TARAC prism system that provides +800 MOA beyond the scope’s internal elevation. The rifle rested on a Phoenix Precision bipod. The ammo was Lapua Center-X subsonic, running 1090 FPS at the muzzle. Paul notes: “The 22 GSL silencer had no noticeable point of impact shift. It actually shot better groups with it on.”
Addison’s impressive shooting was done at the Marksmanship Training Center in Lake City, Michigan. This veteran-owned shooting facility is a very scenic venue as you can see:
Ballistics Prediction Was Nearly Perfect
The Applied Ballistics solution was within one MOA at 1000 yards. 1000 yards required 342 MOA up from the 100-yard zero. Flight time was over 5 seconds! MV was 1090 FPS. The target was a 6′ x 6′ F-Class frame, covered with white paper. That’s roughly 7 MOA, equivalent to about 3.5″ at 50 yards.
Comments from Facebook Fans (and Bryan Litz)
It’s in her genes — Brian R.
Like father like daughter! — Daryll B.
Dang! And I thought my son hitting at 400 was good! — George W.
Most people I know including myself did not believe that the .22 LR genuinely flew that far (despite the warning labels). — Robert S.
Applied Ballistics was within 1 MOA on a 342 MOA solution. We’ll have to tighten that up. — Bryan Litz
All in the Family — Three Generations
Along with Addison, father Paul Phillips and grandfather Rusty Phillips (right) all took shots at 1000 yards, and all three generations of Phillips got hits. The threesome took a total of 145 shots at 1000 yards and impacted 13 times. Paul observed: “We hit almost 1 in 10 shots [with] lots of close misses. Believe it or not, most were due to elevation not wind. There were 3-5 mph winds from 3-9 o’clock. To help see hits, John Droelle was spotting for us in the 1000-yard pits.”
Here’s the super-speedy way to turn case-necks. Our friend Erik Cortina figured out how to turn his match cartridge case-necks using his milling machine. Erik told us: “While in Raton, Mid Tompkins told me that he turns his brass on milling machine. He said he could do about 500 in two hours, so I decided to try it.”
Erik fitted a Don Nielson “Pumpkin” neck-turner to the mill, and he used a modified 21st Century case holder to secure the brass. As you can see from this video, Erik was very successful with the process. The tool spins at 1500 rpm, turning Lapua 6.5-284 cases that have been necked up to 7mm.
Video Shows Erik Cortina Neck-Turning Cases with Milling Machine:
Cartridge Brass: Lapua 6.5-284 necked up to 7mm
Lubricant: Lithium grease inside and outside of neck
Neck-Turner: Nielson Pumpkin running at 1500 RPM
It’s hard to argue with Erik’s results. Here are his turned Lapua cases, which have neck-wall thickness consistent to two ten-thousandths of an inch. Think you could do better turning manually?
Some of Erik’s Facebook friends had questions about this process:
Q: Who makes the shell-holder?
Erik Cortina: I did! The shell-holder you can get from 21st Century. I Tig-welded a punch as a handle.
Q: I love the idea of working smarter not harder! Any galling issues? What are your mitigation techniques?
Erik Cortina: No issues. I use lithium grease in spray can. Makes a foam that I dip necks into.
Q: Shouldn’t either the case or the cutter be floating to allow most precise neck turning?
Erik Cortina: Up until [I tried this] I believed the same thing. I was going to build a floating case holder but decided to try rigid setup on a few cases before I built it. Results were great. Neck thickness doesn’t vary more than .0002″, which is same as when I was doing it with floating case holder on the lathe.
Q: Any problems with the Pumpkin changing the cut as it heats up?
Erik Cortina: No — there were no issues with that.
NOTE: Erik Cortina is a very skilled machinist who custom-crafted fittings used for this process. This kind of neck-turning with a milling machine may not be for the everyday hand-loader!
Nielson “Pumpkin” Neck-Turner
The circular orange cutting fixture on Erik’s Milling Machine is a Don Nielson “Pumpkin” neck-turning tool. Don designed this tool to be used by hand or with power. The Pumpkin boasts an eccentric mandrel that allows the cut to be adjusted easily in precise .0001″ increments. Benchresters like this as it allows for very precise control of cut depth and neck-wall thickness.
Jason C., commenting on Erik’s YouTube video stated: “I have a couple of those too. Nothing cuts like a Pumpkin. [Don Nielson] made the best cutter tool ever.” These are still available if you ask around. The photo shows Don with a case-holder mounted to a power assembly. A talented machinist and tool-maker, Don has also been a successful short- and long-range benchrest shooter, who has won NBRSA 600-Yard Championships. CLICK HERE to read about Don’s success with the 6.5×47 Lapua.
Nielson Neck Turner with carbide mandrel. Photo Courtesy Butch’s Reloading.
Folks have asked if there is a tool that can remove obstructions from a Lapua small, BR-sized flash hole without opening the hole size. The Lapua PPC/BR flash hole is spec’d at 1.5mm, which works out to 0.059055″. Most of the PPC/BR flash-hole uniforming tools on the market use a 1/16″ bit which is nominally 0.0625″, but these often run oversize — up to 0.066″.
If you want to just clear out any obstructions in the flash hole, without increasing the flash hole diameter, you can use an inexpensive, five-dollar “pin vise” with an appropriate drill bit. For $1.00, eHobbyTools.com sells a 1.5mm pin vise bit, item 79186, that matches the Lapua flash hole exactly. Other vendors offer a #53 pin vise bit that measures .0595″ or .060″ (depending or source). An 0.0595″ bit is close enough. You can find pin vises and bits at hobby stores, and eHobbyTools sells pin vises for $4.99 to $7.99.
by Tommy Todd, Sierra Bullets Chief Ballistician for Sierra Bullets Blog
I have shot several disciplines of shooting competitions over the years and have learned a few things regarding ammunition and bullet function during this time. Frequently the matches I shoot require 40 to 100 shots before a person gets a chance to clean his rifle. Just as frequently, a good shooting match rifle will still shoot very good scores and groups with that many rounds fired through them. However, those guns do not deliver the same accuracy as when they were clean, but the drop-off in accuracy is not a huge change unless a set of accumulative issues arise.
In one situation, very dirty powder created more serious problems…
Pressure Issues — Extraction Problems Caused by Bad Fouling
Problem: Pressures Increased as Powder Fouled Barrel and Carbon Ring Formed
Solution: Clean Barrel Every Ten Rounds.
I witnessed a set of problems that occurred with a fellow competitor’s rifle at a recent F-Class match. He was using a large case capacity cartridge for the bore diameter and he was shooting a powder that was burning extremely dirty. As the match progressed, the carbon buildup caused most likely a carbon ring in the throat of the rifle and pressures kept increasing to the point that the cases were hard to extract, bolt lift was excessive, and eventually he quit shooting the rifle due to these issues. Accuracy also suffered as could be evidenced by the gun’s performance on target. This load looked fine when he was developing it, none of the excessive pressure signs appeared when he worked the load up, but he was cleaning the gun every ten shots.
When he was shooting multiple, 20-shot strings during the match is when the issues appeared. He was able to give the gun a thorough cleaning and the issues went away, for several rounds and then the pressures started appearing again. These pressure signs were not due to ambient temperatures as it was a cool spring morning and the temperature was in the low 40° range.
Accuracy Issues — Tune Lost with Higher Ambient Temps
Problem: Accuracy Lost When Outside Temp Much Hotter than When Load Developed
Solution: Pull Bullets, Reload Ammo with Lighter Charge
A couple of years ago, I attended a match early in the shooting season and it was unusually hot for that time period. I heard a competitor worrying before the match about his gun “blowing up”. At first I was concerned, but after thinking about what he had said I realized that he meant his “accuracy” blowing up, meaning he knowingly had loaded his ammunition at the top end of an accuracy tune that he established via a ladder test. The next day I asked him how his scores were and he said the gun was not shooting very well initially, but he had found enough equipment from friends that were at the match and had pulled the bullets, reduced the powder charge by a few tenths of a grain and re-seated the bullets and his gun was now shooting normally. The temperature difference between his home range the weekend before when he established his load and the match conditions was about 30 degrees and that was enough to cause an accuracy change at 1000 yards.
To learn more about how ambient temperature (and primer choice) affect pressures (and hence velocities) you should read the article Pressure Factors: How Temperature, Powder, and Primer Affect Pressure by Denton Bramwell. In that article, the author uses a pressure trace instrument to analyze how temperature affects ammo performance. Bramwell’s tests yielded some fascinating results.
For example, barrel temperature was a key factor: “Both barrel temperature and powder temperature are important variables, and they are not the same variable. If you fail to take barrel temperature into account while doing pressure testing, your test results will be very significantly affected. The effect of barrel temperature is around 204 PSI per F° for the Varget load. If you’re not controlling barrel temperature, you about as well might not bother controlling powder temperature, either. In the cases investigated, barrel temperature is a much stronger variable than powder temperature.”
If you haven’t tried Lapua bullets yet you should. The Scenar-L bullets we have tested have proven extremely consistent in weight and base-to-ogive measurement.
The circular orange cutting fixture on Erik’s Milling Machine is a Don Nielson “Pumpkin” neck-turning tool. Don designed this tool to be used by hand or with power. The Pumpkin boasts an eccentric mandrel that allows the cut to be adjusted easily in precise .0001″ increments. Benchresters like this as it allows for very precise control of cut depth and neck-wall thickness. 
To learn more about how ambient temperature (and primer choice) affect pressures (and hence velocities) you should read the article 
