Here’s a smart new product that monitors the temperature and humidity inside your gun safe — with a convenient LCD display unit located on the outside of the safe. You don’t need to string wires or cut a small hole in your safe — there are two separate components, one inside and one outside. The sensor unit (on the inside) communicates wirelessly with the display unit (on the outside).
The new GoldenRod Wireless Hygrometer was designed to display the temp/humidity in your safe without the need to open the safe. NOTE: the wireless LCD display can show BOTH in-vault AND in-room humidity and temperature levels. You can attach the display to the vault door with its built-in magnet, or simply place the display unit on top of the safe using the handy flip-out kickstand. The unit costs just $26.98 at Amazon.com.
GoldenRod Wireless Hygrometer Specifications and Features:
Measures In-Vault and In-Room humidity from 20% to 95%.
Measures In-Vault temperature range from 14°F to 122°F.
Measures In-Room temperature range from -4°F to 158°F.
Records Min/Max temperature and humidity history.
Another Important Accessory — GoldenRod for Inside the Safe
The GoldenRod, marketed as a dehumidifier, is a small, low-wattage electric heating element you place in the safe. Running 24/7 at 140° F, the GoldenRod warms the air in your safe. This changes relative humidity and raises the dew point in the safe so water vapor does not condense on your arms and valuable accessories. When combined with Desiccant packs that absorb moisture, the GoldenRod is extremely effective at keeping your guns rust-free during long-term storage. We do recommend wiping down your guns with Boeshield, Eezox, or Corrosion-X before putting them in storage. These are three of the best corrosion-inhibiting metal coatings you can buy.
You can get the 12″ GoldenRod heating unit for $31.99 on Amazon. There is also an 18″ model for $48.75 and a long 36″ GoldenRod for $39.99 on Amazon, just $8 more than the “foot-long”. The 36″ GoldenRod works well for cold climates and large safes. All GoldenRods come with a detachable plugs for easy installation. The 12″ is rated for 100 cubic foot safes, the 18″ for 200 cubic foot safes, while the 36″ model protects up to 500 cubic feet.
ARs and Narrow-Forearm Sporters Benefit from Front Bag-Rider Blocks
Whidden Gunworks offers a smart product that will enhance the bench-rested accuracy of any rifle with an accessory rail on the forearm. The Whidden Track Plate fits securely in the forearm accessory rail on prone, cross-the-course, tactical, and Palma rifles. These guns typically have a narrow and/or rounded fore-end so they rock and wobble when used with a front pedestal rest. The TrackPlate cures that. Once installed it provides a rock-solid, 2.9″-wide platform that mates perfectly with a benchrest-type front sandbag. This gives sling-shooters maximum stability when testing loads or zeroing their sights or scope. Plus you can now shoot F-Class competitively with a prone gun. (The 2.9″ width is 100% legal for F-Open).
The Track Plate is light-weight, has catamaran-style runners to aid tracking and prevent rocking, and can be easily stowed in a range bag. The Track Plate fits BOTH Anschutz and American style forends and is made in the USA of machined aluminum. The Track Plate is available from Whidden Gunworks for $49.50.
Plate designer (and 5-Time Nat’l LR Rifle Champion) John Whidden says: “The Plate is great for any rifle with a rail whether it ís smallbore, centerfire, or an air gun. Now you can try F-Class with your favorite prone rifle: the Plate has a perfect low-drag finish for riding a rest or sandbags and is competition legal.”
Bag-Riders for AR-Platform Rifles from EGW
AR owners should check out the 3″-wide Delrin bag-rider from Evolution Gun Works (EGW). There are two versions, one for front Picatinny Rails, and another that mounts via sling swivel studs. These EGW Bag-Riders were developed expressly to fit the fore-ends of ARs. The front bag-riders are contoured to match the handguard profile so they fits securely with no wobble.
The $49.99 EGW Picatinny Rail front Bag-Rider simply slides on your under-forearm rail and there is a a tension bolt. Attachment is quick and easy. Or, if your AR has no rail get the original $39.99 EGW front Bag-Rider that attaches to a front sling swivel stud anchor. That allows it to mount as easily as a Harris bipod — no rail needed! Just unscrew the swivel stud, put the front bag-rider in place and attach one hex-head machine screw.
Also with the two front Bag-Riders, EGW offers a Rear Bag-Rider for ARs that attaches via the sling swivel anchor. Overall, it is a slick system. Front and rear bag-riders can be attached in a couple of minutes. The Delrin blocks slide easily in the bags and make the gun ultra-stable. The gun tracks straight back.
AR-platform rifles can be maintenance-intensive beasts. They need regular inspection, cleaning, and lubrication. But some AR owners make the situation worse by not regularly cleaning important small parts, or by using too MUCH oily/greasy lubricants in the wrong places. A properly maintained and lubricated AR15 can shoot hundreds of rounds (between cleanings) without a problem. If you learn where (and where not) to apply lubricant, you’ll find that your AR will run more reliably and the task of cleaning the bolt, bolt carrier, and upper receiver internals will be less of a burden.
Here we showcase videos that show how to field-strip an AR-15, inspect the key parts, clean components, and lubricate internal parts as needed. Along with these videos, we recommend you read a comprehensive AR-15 Gun Cleaning Clinic article on the Brownells website. This explains in detail important procedures that the videos might only cover in a few seconds.
If you want to keep your black rifle running smoothly and reliably, you must clean it regularly and follow the correct maintenance procedures. Here are five videos that explain how to properly disassemble and clean AR-platform rifles.
1. How To Clean Your AR-15 | Cleaning and Maintenance Tips
This is a quick 90-second starter video that may help new AR owners. Ricky Lehnhardt of OTIS Technology demonstrates the basics of cleaning and maintaining your AR-15. Lehnhardt does a good job identifying the points that need cleaning on the inside of ARs. However he works very quickly in the video. You may want to pause the video at some points. Also, Lehnhardt employs a cable for pulling patches and brushes through the barrel. Yes this is fast and easy. However, for match AR rifles, we recommend that you instead use a cleaning ROD with fitted bore guide.
2. Take-Down and Full Cleaning of AR-15 by Jerry Miculek
Here ace shooter Jerry Miculek takes down and cleans an AR-platform rifle belonging to his daughter Lena. This is a good video because Lena’s rifle was “run hard and packed up dirty” so you can see where carbon and grease build up. This 35-minute video is very thorough. Jerry is one of the nation’s top action carbine shooters, so listen carefully to his advice on cleaning and lubrication.
3. AR-15 Maintenance: Field-strip, Clean and Lubricate an AR-15
Gunsite Academy instructor and gunsmith Cory Trapp demonstrates the proper way to field-strip, clean, and lubricate an AR-15 carbine. In this 30-minute video, Trapp offers several important technical tips and hints. For example, at 11:05 Trap demonstrates how to determine if your bolt needs new gas rings. Along with cleaning procedures, this video explains how to inspect key components and how to function-test your AR before each shooting session.
4. AR-15 Dissassembly and Cleaning Guide
This video does a good job, with close-ups, showing how to remove the bolt carrier and clean the inside of the upper receiver. Then you can see how to work with various tools to clean the bolt, bolt carrier, and inside of chamber. We also recommend that you inspect the ejector recess and extractor recess. When we’ve inspected ARs that failed to cycle properly, we have often found nasty gunk (mixture of carbon, greasy lube, and brass particles) in these areas.
5. Basic AR-15 Quick and Easy Field Maintenance
In this NSSF-sponsored video, pro shooter Ryan Muller demonstrates basic, quick field maintenance of his AR-15. This would be for a quick cleaning and lubrication of the reciprocating parts. This covers rapid maintenance in the field. For full field-stripping and thorough cleaning, watch the previous videos.
Handy Mat for Cleaning AR Rifles
When working on an AR-15, it’s smart to have a pad that can absorb solvents and cushion your upper and lower. The $24.99 Real Avid Smart Mat is a good choice. This features printed take-down instructions and it has a handy parts tray on the right side. The mat rolls up for convenient storage. Click HERE to learn more.
Vital Inspections You Should Do After Disassembly
Last but not least, here are recommended inspections you should do every time you do a full field-strip and cleaning of your black rifle:
So, are you feeling lucky? If so, head over to the NSSF’s Gearbox Giveaway webpage. To celebrate National Shooting Sports Month (NSSM), gun and gear manufacturers are offering big prize packages — the Gearbox Giveaways. Enter to win rifles, pistols, ammo, and other valuable prizes. Total Product Value is over $15,250! Many of the Gearbox packages are worth over $2500. Enter as many of the Gearbox Giveaways as you like, but time’s running out — the last day to enter is August 31, 2021.
Shown below are the 6 Gearbox Giveaways starting with the most valuable products offered in the prize packages. You’ll find more details of the prize packages on the NSSF website. NOTE: You need to enter separately for each Gearbox Giveaway prize package. Good luck!
1. SIG Sauer Gearbox GiveAway — Total MSRP: $3638.98
What’s in the Gearbox:
SIG SAUER CROSS (.308 Win or 6.5 Creedmoor): $1,649.99
SIERRA3 BDX KIT (includes scope and rangefinder): $1429.00
This combo kit includes:
– SIERRA3 4.5-14x50mm Riflescope
– KILO1800 Rangefinder
– Features BDX 2.0 for app-free pairing
– Smart BDC reticle with pre-loaded ballistic groups
ELITE HUNTER TIPPED Ammo (10 boxes): $459.99
SIG SAUER GEAR: $100.00
Total MSRP: $3638.98
2. Mossberg Gearbox GiveAway — Total MSRP: $2,695.97
What’s in the Gearbox:
Mossberg MC2c Compact 9mm, w/ Night Sights ($613)
Mossberg 500 12 Gauge Retrograde ($553)
Mossberg MVP Precision Bolt Action, 6.5 Creedmoor ($1,450)
Mossberg Soft Case ($24.99)
Mossberg Aluminum Water Bottle ($19.99)
Mossberg T Shirt ($19.99)
Mossberg Baseball Hat ($15)
Total MSRP: $2,695.97
3. Primary Arms Gearbox GiveAway — Total MSRP: $2,863.90
What’s in the Gearbox:
Geissele Automatics Super Duty Rifle Gray 16″ ($2,225.00)
Primary Arms SLx Advanced Rotary Knob Microdot Red Dot Sight ($129.99)
Reptilia Corp DOT Mount for Aimpoint Micro Black ($98.96)
SureFire M640DF Scout Light Pro Dual Fuel Weapon Light 1500 Lumens ($296.00)
Arisaka Defense M-LOK Indexer ($30.00)
Blue Force Gear Vickers Push Button Sling Wolf Gray ($83.95)
DURAMAG .223 Steel Magazine Orange Follower 30 Round ($81.50)
Tru-Spec 24/7 Series Original Tactical Pant ($49.95)
Primary Arms Logo T-Shirt ($24.99)
Total MSRP: $2,863.90
4. Bear Creek Arsenal Gearbox GiveAway — MSRP: $1,418.89
What’s in the Gearbox:
AR15 16″ bbl 5.56×45 complete rifle ($639.99)
5.56 Gen 2 16″ upper ($264.99)
7.62 gen 2 10.5″ upper ($233.99)
Canted Flip up sights ($39.99)
Standard Scope ($129.99)
BCA Trucker Hat ($11.99)
BCA Shirt ($14.99)
Oval BCA Bear Sticker, bumper sticker, BCA Decal ($10.00)
5.56 Cleaning Kit ($9.99)
Cerus Gear BCA Mat ($23.99)
Gat Monkey BCA Sling ($34.99)
BCA Slack Pack ($3.99)
Total MSRP: $1,418.89
5. Winchester Gearbox GiveAway — Total MSRP: $1,140.00
What’s in the Gearbox:
Choice of Winchester Ammunition (Subject to Availability) – $500
30” Red Swivel Bar Stool (2) – $190
Winchester Red Floor Mat (Choice of Vertical or Horizontal) – $79.95
Winchester Gun Cleaning Mat Only (Pistol & Rifle) – $27
Winchester Gun Cleaning Kit (Choice of Pistol & Rifle or Shotgun) – $23
Winchester Stormtech Duffle Bag – $70
Winchester Red Gun Case (2) – $96
Team Winchester Solar Charger – $20
Winchester Super X 100th Anniversary T-Shirt – $18
Winchester Super X 100th Anniversary Hat (2) – $36
Winchester Black Hoodie – $30
Winchester USA Valor T-shirt – $25
Winchester USA Valor Hat (2) – $50
Total MSRP: $1,140.00
6. Glock Gearbox GiveAway — Total MSRP: $3,500.00 claimed*
What’s in the Gearbox:
G43X 4 Pistol Range Bag MOS – $582
6 Multi-Mag Pouch
Quadcamo Hat
Carry Confidence Shirt
Training course from GLOCK’s Director of Training
All expenses paid trip to tour Glock USA factory
Personalized fan video from Chuck Norris: Priceless
Personalized letter from Mr. and/or Mrs. Glock with both autographs: Priceless
* This $3500.00 stated value is based largely on expenses-paid trip to U.S. Glock Factory. The actual retail value of good is less than $1000.00
Friday August 6 through Sunday, August 8, 2021 classic military rifles will fill the firing lines at Camp Perry. The National John C. Garand, Springfield, Vintage and Modern Military Match (GSMM) will be held Friday, Saturday, and Sunday, with the one-day Springfield M1A Match on Sunday only. (See CMP Camp Perry Calendar.) Some participants will shoot just one rifle type, but there is also a combined GSMM 4-Gun Aggregate. This GSSM Agg encompasses a series of position shooting matches on NRA SR targets at the CMP Nationals. As the matches are completed, day by day, results will be posted on the CMP National Matches Results Page.
This video shows the Garand Match at Camp Perry. The rifles are still the same a decade later…
The annual GSMM event is one of the most popular events at Camp Perry, drawing participants from around the nation. One of the favorites to win the GSMM Aggregate is Brian Williams, recently profiled in our Daily Bulletin. The 4-gun Aggregate includes Garand, 1903 Springfield/1917 Enfield (or similar bolt rifle), M1 Carbine, and AR-type rifle for “Modern Military”. Remarkably, Brian has won the GSMM 4-Gun at the CMP National Matches in Camp Perry three years in a row — the inaugural 2017 4-Gun Agg, plus 2018 and 2019. There was no match in 2020 due to COVID, so Brian aspires to his fourth title in 2021. Below, Brian offers some thoughts on the classic wood-stocked rifles used in GSMM competition.
The Classic Wood Guns of CMP 4-Gun Competition
Perspectives on M1 Garand, M1903A3, M1917, and M1 Carbine
Brian provides perspectives on the “Wood Gun” game, with suggestions on how to improve your performance with the M1 Garand, M1903 Springfield, M1917 Enfield, M1 Carbine, and other 20th Century military rifles. Brian explains what to look for
Q: What should one look for when acquiring older rifles for CMP 4-Gun Games — M1 Garand, M1903/1903A3, M1917, M1 Carbine? What are realistic budgets for these firearms? What kind of accuracy can one expect? What upgrades are important?
Brian: All of these military surplus rifles are out there, but they are getting harder to get your hands on. And, just like everything else, the prices continue to rise. Not that long ago you could get your hands on a M1 Garand for four or five hundred dollars. In today’s market they are usually about double that price. But understand that these rifles are all unique and all have a story to tell. No two are alike, or have the same story. Just like the guns themselves, there are fewer and fewer dedicated gunsmiths for these vintage rifles. But I promise if you look for a good smith, they are out there and they are some of the most interesting people you will ever meet.
M1 Garand — Of the four (4) centerfire guns I shoot in the CMP games, my favorite has to be the M1 Garand. There were over 6 million of them produced in a very short time period, and every single one has its own unique story, and that is just cool. M1 Garands are capable of good accuracy. I believe that a well-maintained M1 with at least a replacement barrel is capable of shooting between 1 and 1.5 MOA.
M1903A3 Springfield — I find that the sights on a M1903A3 are a little easier to see than the sights of the M1903, but both are very accurate rifles. Like most military rifles in the current climate the prices have risen dramatically, but there are some gems out there that can be had for far less than $1000. The nice thing about the Springfield rifle is that almost all of the accuracy than you would want can come from just replacing a worn out 80-year-old barrel. In terms of accuracy, I think a good M1903A3 can shoot 1 MOA most of the time.
M1917 Enfield — This rifle is the newest of my collection and it shoots very well, with just a new Criterion barrel — again about 1 MOA with iron sights. These rifles are very close in price to the M1903 Springfield. But if you do your homework and keep your eyes open, there are always great deals to be found. I actually prefer shooting the M1917 to my M1903A3, due primarily to the M1917’s cock-on-close bolt which allows smoother cycling.
Public domain photo from Armémuseum (The Swedish Army Museum).
M1 Carbine — By 1945 there had been more M1 Carbines built than Garands. Today the Carbine can be harder to find, and due to the scarcity the price has shot up and most military M1 Carbines are going for more than $1000 at this point. The great thing about the M1 Carbine is that as long as you have a good ammo supply this rifle can shoot. Honest. I have had countless numbers of people that tell me that there is not an M1 carbine that will shoot. I can tell you from experience that they will, but you are going to have to put in some time with one to learn how to get it to shoot where you want it.
The M1 Carbine shoots the .30 Carbine round, with 110gr bullet going about 1990 FPS. In comparison, the .30-06 Springfield round used in the M1 Garand is almost three times more powerful than the .30 Carbine.
The Gun Digest 2022, 76th Edition, can be pre-ordered now for $34.99 (paperback). Set for release on 8/17/2021, this 592-page resource covers rifles, shotguns, handguns, muzzleloaders, airguns, optics and more. We like the print edition, but there is also a PDF eBook version for $32.99 at Gundigeststore.com. You can read the PDF version on your tablet or computer. Both paperback and PDF versions provide hundreds of photos plus new product roundups, in-depth product tests, and scores of articles and stories.
The Gun Digest 2022 Annual is also available on Amazon.com. The paperback print edition is $31.87 at Amazon while the electronic Kindle version is $23.16 at Amazon.
Gun Digest 2022 Editor-in-Chief Phil Massaro has assembled a large team of respected industry authors for the new book, including Craig Boddington, Joe Coogan, Ron Spomer, Patrick Sweeney, Jim Supica, Thomas Gomez, Tom Turpin, Wayne van Zwoll, Bob Campbell and many more.
Gun Digest 2022 covers hunting, personal defense, target shooting, gunsmithing, and collecting. Historical articles look at the role played by firearms in our country. There are Updated Ballistics Tables, and the catalog section shows off the newest offerings in rifles, handguns, shotguns, muzzleloaders and air rifles.
Reports from the Field cover the newest firearms and accessories. A Testfire section brings readers up to date on product performance. And the annual photo essay spotlights the finest custom and engraved guns.
Other Good Books from Gun Digest Media
Gun Digest Media produces numerous other quality books for rifle, pistol, and shotgun owners. Here are four volumes we recommend. These are offered in both paperback and eBook versions:
RCBS has introduced an advanced successor to the ChargeMaster Lite electronic powder scale/dispenser. RCBS calls the new machine the ChargeMaster LINK. This boasts multiple refinements, most notably the ability to control the scale via BlueTooth using an APP on your mobile device. RCBS claims the unit “consistently delivers +/- 0.1-grain accuracy, from 0 to 350 grains[.]” It will be able to run from an external battery, or various voltage AC sources using a CE Approved 4-Country Universal Power Supply.
The ChargeMaster LINK will hold up to 2000 grains of powder, and dispense up to 350 grains per charge. MSRP is $349.95, and we expect “street price” to be around $299.00. RCBS plans to start shipping the end of this month (August 2021).
Our friend Gavin Gear of UltimateReloader.com has done an early “reveal” of the new ChargeMaster LINK. Watch the video below for Gavin’s explanation of this machine’s capabilities and features.
Watch Video to see new RCBS ChargeMaster LINK Features
Gavin plans to do a full-length product review but so far he has been impressed with the ChargeMaster LINK: “This new powder dispenser builds on the RCBS ChargeMaster Lite, adding Bluetooth connectivity, and it works with a free APP that will be available from RCBS.”
ChargeMaster LINK Features
The new RCBS ChargeMaster LINK employs the load cell and electronics of the ChargeMaster Lite. However the newer Link model “advances the powder measuring process with built-in Bluetooth that pairs with updated RCBS APP for a customized, streamlined powder-dispensing.”
Bluetooth Compatible with FREE APP
+/- 0.1 Grain Dispensing Accuracy
2000 Grain Powder Capacity
Quick Warm-Up Period
Ability to run on external battery pack
CE Approved 4-Country Universal Power Supply
16 Segment LCD Touchscreen Display
Overcharge Warning via Flashing screen
Ability to disable audible beeps
User-serviceable infinite lifeshaft seals
Sealed Platen to keep powder out
Optimal dispense tub angle for speed and accuracy
He who dies with the most toys wins — right? Well Sinclair has another interesting gadget you can add to your reloading bench. The Sinclair Case Neck Sorting Tool lets you quickly sort brass by neck-wall thickness. For those who shoot “no-turn” brass, this can improve neck-tension consistency. Large variances in neck-wall thickness can cause inconsistent neck “grip” on the bullet. Generally, we’ve found that more consistent neck tension will lower ES and (usually) improve accuracy. We know some guys who shoot no-turn 6mmBR brass in competition with considerable success — but their secret is pre-sorting their brass by neck-wall thickness. Cases that are out-of-spec are set aside for sighters (or are later skim-turned).
Watch Case Neck Sorting Tool Operation in Video
How the Case Neck Sorting Tool Works
Here’s how the Sinclair tool works. Cases are rotated under an indicator tip while they are supported on a case-neck pilot and a support pin through the flash hole. The unit has a nice, wide base and low profile so it is stable in use. The tool works for .22 through .45 caliber cases and can be used on .17- and .20-caliber cases with the optional carbide alignment rod. The MIC-4 pin fits both .060 (PPC size) and .080 (standard size) flash holes. Sinclair’s Case Neck Sorting Tool can be ordered with or without a dial indicator. The basic unit without dial indicator (item 749-006-612WB) is priced at $59.99. You can also buy the tool complete with dial indicator (item 749-007-129WB) for $89.99. IMPORTANT: This sorting tool requires caliber-specific Case Neck Pilots which must be ordered separately.
Editor’s Comment: The purpose of this Sinclair tool is rapid, high-quantity sorting of cartridge brass to ascertain significant case-neck-wall thickness variations. Consider this a rapid culling/sorting tool. If you are turning your necks, you will still need a quality ball micrometer tool to measure neck-wall thickness (to .0005) before and after neck-turning operations.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Creedmoor Sports — American Practice Bullets, Save 20-30%
⏺ Save money on big brand bullets so you can practice more often
Creedmoor Sports is offering 500-ct bulk packs of factory second bullets. You can snatch up these American Bullet Company Practice Bullets in .22, 6mm, and .308 calibers at exceptionally low prices. These are factory ‘seconds’ from a very well-known manufacturer (think green) that are bulk-packed and ready to load. Get a box of 500 bullets at huge savings over regular prices. NOTE: There may be minor cosmetic issues with the bullets, or weight variances. In today’s world of component shortages, this is a great way to save money, and/or do more live fire practice with a lower cost per shot.
2. Sportsman’s WHSE — Savage 110 Elite Precision, $1749.99
⏺ Competitive PRS Production Class Rig with MDT Chassis
Excellent Video Review of Savage 110 Elite Precision in 6mm Creedmoor
PRS Production Class has a $2500 limit. With this Savage 110 Elite Precision you get a very competitive 6mm Creedmoor rifle, with a top-quality chassis, for $1749.99. That’s hundreds less than similar quality boutique-brand PRS Production rigs. Put the money saved into optics. The Savage Arms 110 Elite Precision boasts a Modular Driven Technologies (MDT) Adjustable Core Competition (ACC) Chassis, a full-length forearm ARCA rail, titanium nitride-coated “blueprinted” action, and effective muzzle brake. This Guns & Ammo video showcases the Elite Precision’s notable features.
⏺ Turn-key solution for 6mm Dasher Shooters with great dies
The 6mm Dasher is very popular in PRS and Mid-range Benchrest. And a 6mm Dasher just won the F-Open Mid-Range Nationals convincingly. If you’re ready to build a Dasher, consider the 6mm Dasher Starter Kit from Whidden Gunworks. The kit includes your choice of standard dies, 100 pieces of Lapua 6mmBR brass, 6mm Dasher Hydraulic Form Die, and a 6mm Dasher Case Gauge. This is everything you need to get up and running with this match-winning wildcat cartridge.
4. Creedmoor Sports — Sierra Bullets PLUS FREE Ammo Box
⏺ Good Deal on Sierra bullets plus handy Ammo Box
Sierra makes some of the highest-quality bullets on the market. Right now Creedmoor Sports has most popular Sierra Bullets in stock and ready to ship in many calibers. Most of the popular MatchKing bullet types have the meplats “tipped” at the factory for consistent BC and improved long-range performance. NOTE: If you purchase at least $150 in Sierra bullets you’ll get a FREE high-quality Plano Ammo Box.
5. KYGUNCO — Taurus G2c 9mm Pistol, $205.99
⏺ Great Deal on Reliable 12rd 9mm Carry Pistol
The Taurus G2c is a good little compact carry gun at a VERY attractive price — a third what you might pay for a 9mm Glock 19 these days. KYGUNCO has the black-on-black 9mm Taurus G2c for just $205.99 (cash price). That’s the best deal we’ve seen on a major brand 9mm pistol in a long time. At 6.25″ OAL, and weighing just 21.2 oz. unloaded, this affordable 9mm handgun is a true compact. Despite its small size, the G2c boasts a 12-round magazine. We like the fact it has a left-side manual safety (unlike the Glock).
6. Amazon — RCBS Rock Chucker Supreme, $188.99
⏺ Strong, versatile full-size press with lifetime warranty
With the shortages of good factory ammo, more shooters are hand-loading than ever before. That means that good reloading presses have been hard to find at reasonable prices. But here’s a good deal on a great press. Right now Amazon has the legendary RCBS Rock Chucker Supreme for under $190.00. This strong, capable press and allows you to do myriad reloading tasks: decapping, neck-sizing, FL-sizing, crimping, and even swaging bullets. RCBS offers a rock-solid lifetime warranty.
7. Amazon — Caldwell The Rock BR Rest, $140.79
⏺ Good basic rest for Varmint work and sighting-in rifles
Right now the green-framed Caldwell Rests are deeply discounted on Amazon. If you’re looking for something you could use in competition as well as varminting, check out the Caldwell Rock BR at $140.79. The Rock BR model is stable and works well for varmint shooting. If you want something lighter and more basic, the Rock Deluxe at $75.19 is an excellent value. Or if you prefer a compact, lightweight front rest for basic rifle and pistol work, consider a Rock Jr. at $35.54.
8. Natchez — CCI Blazer 9mm Ammunition, $19.99
⏺ Very reliable 9mm practice ammo at a good price
Finding quality 9mm Luger ammo at a decent price has been difficult lately. But here’s a good deal at Natchez. Quality, aluminum-case CCI Blazer 9mm 115gr ammo is now just $19.99 per 50-count box. That’s HALF the cost of 9mm pistol ammo at some other vendors. NOTE: Having aluminum cases, this ammo is NOT reloadable. But, in our experience it is reliable and accurate.
9. Amazon — KUBEI USB Rechargeable Digital Scale, $24.99
⏺ Compact scale with USB-rechargeable battery at great price
Everyone can use an inexpensive, compact scale for loading at the range or sorting bullets or maybe even primers. One very affordable option KUBEI USB Rechargeable Digital Scale. Unlike most other inexpensive digital scales, this comes with a large dust cover with a “window” for your powder pan. Notably, this scale can be conveniently recharged with a standard USB cable — no batteries to replace ever! We have heard positive reports from Forum members about this $24.99 portable scale, which offers 9 types of weight units, calibration weight, and fold-down protective lid.
10. Amazon — Tactical Hard Case, Customizable Foam, $89.99
⏺ Solid, strong wheeled case for ARs, or hunting rifles
Whether driving or flying, you need a good, strong case to protect your firearms. This affordable TSA-approved HQ ISSUE Tactical Rifle Hard Case has room for an AR, handguns, and accessories or a couple hunting rifles (with moderate-length barrels). NOTE: This case has rollers — something you don’t typically find on cases at this price point. The included pluckable foam interior can be easily customized to fit your rifle. External dimensions are: 43″ x 16″ x 7″.
11. Amazon — LEE Perfect Powder Measure, $22.95
⏺ Low-cost unit will work for basic powder-dispensing duties
Sometimes you just need a simple but effective way to throw powder charges without a big investment. For basic powder-throwing tasks the LEE Perfect Powder Measure can do the job. With a simple adjustment you can throw anywhere from 2 grains to over 70 grains. This is fine for most pistol charges. For more accurate rifle handloads, you can throw the charge within a grain and then trickle up to the final load weight using using a scale and separate trickler.
In the video below, Shiraz Balolia takes you through the essentials of fire-forming brass with his custom-made, water-cooled benchrest railgun. Shiraz is a current Team member (and former Team Captain) of the U.S. F-Class Open Rifle Team. Shiraz has competed on the National and World level for more than two decades, and has won multiple major International championships in 1000-yard shooting. In this video he will walk you through fire-forming cartridges in .284 Shiraz, a wildcat based on the .284 Winchester.
Fire-forming properly is a pre-requisite for accuracy in a match rifle. Done right, fire-forming can improve cartridge consistency shot to shot. Creating a fire-forming fixture like this, or even a more basic design, can save you time and potential frustration on the range, Shiraz explains. The key is getting the initial case expansion to match your competition chamber quickly but without generating excessive heat. Follow along as Shiraz takes you through the methodology of fire-forming both in his work shop and on the range.
Here Shiraz Balolia takes you through the essentials of fire-forming brass with his custom-made, water-cooled benchrest railgun.
Along with running the successful Grizzly Industrial enterprise, Shiraz is a top competitor and member of the U.S. F-Open team. He has competed in three world championships. In recent years he captured three straight Canadian National F-Class Championships (READ 3-Peat STORY). So, this guy knows his stuff.
Shiraz shows fellow shooters how to fire-form cases efficiently without burning precious match barrel life. In the video above he uses a custom-designed railgun that employs water cooling for the barrel. This is done with hoses running from a sink, so that cool water is constantly flowing through the barrel jacket.
Shiraz says the fired cartridge are actually cool to the touch because the water-jacketed barrel keeps everything at a moderate temperature. (See video at 8:00)
Here’s a smart new product that monitors the temperature and humidity inside your gun safe — with a convenient LCD display unit located on the outside of the safe. You don’t need to string wires or cut a small hole in your safe — there are two separate components, one inside and one outside. The sensor unit (on the inside) communicates wirelessly with the display unit (on the outside).
He who dies with the most toys wins — right? Well Sinclair has another interesting gadget you can add to your reloading bench. The Sinclair 
