With barrels, one wonders “Can a little more length provide a meaningful velocity gain?” To answer that question, Rifleshooter.com performed an interesting test, cutting a .308 Win barrel from 28″ all the way down to 16.5″. The cuts were made in one-inch intervals with a rotary saw. At each cut length, velocity was measured with a Magnetospeed chronograph. To make the test even more interesting, four different types of .308 Win factory ammunition were chronographed at each barrel length.
This is a very useful test is you’re thinking about building a .308 Win hunting rifle, or perhaps thinking of going shorter for your F-TR rifle to save weight.
Test Barrel Lost 22.7 FPS Per Inch (.308 Win Chambering)
How much velocity do you think was lost, on average, for each 1″ reduction in barrel length? The answer may surprise you. With a barrel reduction from 28″ to 16.5″, the average speed loss of the four types of .308 ammo was 261 fps total. That works out to an average loss of 22.7 fps per inch. This chart shows velocity changes for all four ammo varieties:
Summary of Findings:
The average velocity loss per inch, for all four ammo types combined, was 22.7 FPS. By ammo type, the average FPS loss per inch was: 24.6 (Win 147 FMJ), 22.8 (IMI 150 FMJ), 20.9 (Fed GMM 168gr), and 22.5 (Win 180PP).
Interestingly, these numbers jive pretty well with estimates found in reloading manuals. The testers observed: “The Berger Reloading manual says for the 308 Winchester, ‘muzzle velocity will increase (or decrease) by approximately 20 fps per inch from a standard 24″ barrel’.”
How the Test Was Done
The testers described their procedure as follows: “Ballistic data was gathered using a Magnetospeed barrel mounted ballistic chronograph. At each barrel length, the rifle was fired from a front rest with rear bags, with five rounds of each type of ammunition. Average velocity and standard deviation were logged for each round. Since we would be gathering data on 52 different barrel length and ammunition combinations and would not be crowning the barrel after each cut, we decided to eliminate gathering data on group sizes. Once data was gathered for each cartridge at a given barrel length, the rifle was cleared and the bolt was removed. The barrel was cut off using a cold saw. The test protocol was repeated for the next length. Temperature was 47° F.”
CLICK HERE to Read the Rifleshooter.com Test. This includes detailed charts with inch-by-inch velocity numbers, multiple line charts, and complete data sets for each type of ammo. Rifleshooter.com also offers ballistics graphs showing trajectories with different barrel lengths. All in all, this was a very thorough test by the folks at RifleShooter.com.
Much Different Results with 6mmBR and a Longer Barrel
The results from Rifleshooter.com’s .308 barrel cut-down test are quite different than the results we recorded some years ago with a barrel chambered for the 6mmBR cartridge. When we cut our 6mmBR barrel down from 33″ to 28″, we only lost about 8 FPS per inch. Obviously this is a different cartridge type, but also our 6mmBR barrel end length was 5″ longer than Rifleshooter.com’s .308 Win start length. Velocity loss can be more extreme with shorter barrel lengths (and bigger cartridges). Powder burn rates can also make a difference.
On the 6.5 Creedmoor Facebook page we found an eye-catching Savage Model 10 BA Stealth. Rifle owner Derek P. has done some important upgrades, starting with a wicked, spiral-fluted McGowen barrel with red-painted flutes. The red theme was carried over to the chassis which combines fire-engine red with matte black in the middle. The scope rings and even the magazine were painted red to match as well. The whole effect is very striking, as you can see.
The barrel is a 29-inch 1:8″-twist McGowen. The optic is a 4.5-27x56mm Vortex Razor HD GenII with sunshade. That supper-stable rear sandbag is a Protektor DR Bag, one of our favorites. The front sandbag is also a Protektor. The front Rest is the new Protektor Aluminum Rest with Mariners Wheel. Look carefully and you’ll see a flat 2.5″-wide block on the underside of the forearm. That improves stability and tracking.
What we really like is the upgraded rear buttstock section. This is NOT standard by any means. Rifle owner Derek has fitted an aftermarket XLR Tactical Lite Buttstock that sits properly in that Protektor DR rear bag. This unit combines an adjustable buttpad with a nice cheek-rest (with upgraded pad from Tactical Works). And, very importantly, the XLR can be fitted with a “tactical bag rider” or you can easily make your own bag rider.
As the Savage 10 BA Stealth Comes from the Factory
This video shows a box-stock Savage 10BA Stealth. Note how different the stock buttstock/cheekpiece assembly is compared to Derek’s Red Hot Savage.
The 2021 NRA Mid-Range F-Class Championships are complete, with the Long-Range competition running right now. We commend the new Mid-Range Champions who both shot spectacular matches. Roger Mayhall didn’t drop a point in F-0pen, finishing with 1800-131X to win F-Open. That’s a brilliant performance.
In F-TR division, Drew Rutherford topped a competitive field with 1791-96X. Hail the new Champions!
Roger Mayhall Wins F-Open Mid-Range with Stunning 1800-131X
6mm Dasher Rifle Takes F-Open Title
Roger shot a 6mm Dasher, a wildcat based on the 6mmBR cartridge. Roger said his rifle was a tack-driver: “I think I owe my gunsmith a beverage or two!” Roger did a superb job of wind-reading to finish 3 days without dropping a point.
“I’ve known Roger for over 5 years. Great man, always willing to help a fellow shooter. Shooting clean all three days with an incredible X-count. Well done! So much for the claim that a 6mm can’t win an Aggregate!” — Jason Simes
“Good job buddy — I told you those Dashers could shoot. Just outstanding shooting.” — Chris Ford
“Awesome shooting Roger! Chalk up a national championship to the 6mm.” — Dan Bramley
About Roger Mayhall’s Championship-Winning Dasher
Posting on Facebook, Roger wrote: “I’ve had a few people ask about the equipment I used in the Mid-Range at Nationals. Here are the particulars:
The gun was a 6 Dasher, supported by a Defiance Deviant action, Bix ‘N Andy trigger, Alex Wheeler LBR F-Class stock, Sightron SV ED 10-50x60mm scope, Dan Bramley tuner on a 30″ Krieger [1:8″-twist] barrel. Also used were a SEB NEO front rest, Dima Rifle Systems Rear Bag with a Dead Bottom Bag. My load consisted of the 105gr Berger Hybrid in a fire-formed 6BR Lapua case propelled by Varget powder and a CCI 450 primer. Barrel work was done by Dan Bramley[.]”
Drew Rutherford Wins F-TR Mid-Range Championship
Drew Rutherford put on a strong performance to win the F-TR Mid-Range Championship. Rutherford was using Eliseo R1 Tubeguns fitted with SEB JoyPod coaxial bipod. Chassis-maker Gary Eliseo noted: “Congratulations to Drew Rutherford, national midrange FTR champion! Drew used his .223 Rem and .308 Win R1 rifles to win the Mid-Range Championship, well done Drew!”
The Competition Machine (Eliseo) R1 Chassis is a very versatile system. As fitted with rear bag-riders and SEB JoyPods, Drew used his R1s with great success. But the same chassis, less bag-rider and bipod, can be used for “hard-holding” Palma Matches, or even High Power competition.
Solomon Sets New Nat’l F-Open 1-Day Record with 600-53X
Finishing second in the F-Open Mid-Range Championship was Bret Solomon with 1798-135X. That was notable because Bret posted the high X-Count, AND set a single-day National Record in the process. Gunsmith Thomas “Speedy” Gonzalez posted: “Congratulations to my friend Bret Solomon on shooting a 200-20X and then setting a new [1-Day] 600-yard National Record of 600-53X at the U.S. F-Class Nationals. Bret was shooting the Lil’ Red Devil in 7mm RSAUM with a new Bartlein 4-groove barrel I forced him to shoot!”
Christened the “Little Red Devil” by Speedy, this ruby red, flame maple-stocked beauty is chambered in .284 Winchester. It features a Melonited BAT 3LL action with two bolts (regular and magnum bolt face). The stock is crafted by Will McCloskey using advanced CNC machines, allowing ultra-precise tolerances for improved tracking and perfect geometry.
Torrefied Wood from Yamaha, CNC-Milled to Perfection
This wood is very special — the flame maple was sourced from Yamaha which used a torrefaction process to stabilize the wood and prevent warping. Yamaha’s proprietary ARE process was developed by Yamaha for musical instruments. Speedy explained that Yamaha uses heat and pressure (we think) to stabilize the wood and dampen vibrations. During torrefaction, the sap in the wood actually crystallizes.
For this rifle build, the torrefied wood blank was CNC-milled by Will McCloskey to “best-in-industry” tolerances. A special red-tone polyester finish Lee Garver, a noted guitar painter. This very hard, yet glossy finish makes the stock “pretty nearly scratch-proof” according to Speedy.
The 2021 NRA F-Class National Championships are underway right now at Camp Atterbury, Indiana. The Mid-Range Nationals concluded yesterday with the Team Match, and the Long-Range F-Class Nationals commence today, July 27, 2021 and run through Friday, July 30th. For F-Class competitors, making the right wind call is a vital skill. Many shooters and team wind coaches will be using Kestrel Wind Meters, widely regarded as the best on the market.
This article reviews the advanced Kestrel 5700 Elite Wind Meter with sophisticated ballistics capabilities. Our review features three videos by F-Class John that show how the Kestrel 5700 Elite works with Applied Ballistics APP software and LiNK connection.
This Part I Video starts with a basic Kestrel Anemometer (blue case, 00:00-00:40) wind meter. Then reviewer F-Class John looks at the “smart” Kestrel 5700 Elite with Applied Ballistics functionality and LiNK Bluetooth connectivity. John explains the many features of the Kestrel 5700 and how it holds a powerful ballistics calculator in the convenient, easy-to-tote Kestrel package. With the Kestrel 5700 Elite, once you enter data about your bullets, velocity, zero, and rifle, the Kestrel can calculate come-ups and wind corrections. If you don’t yet own a Kestrel, we highly recommend you watch this series of videos that explains advanced Kestrel features in detail.
This Part II Video shows the key features of the advanced software APP used by the Kestrel 5700 Elite unit with Applied Ballistics. The Kestrel 5700 can “talk” to a mobile device that runs the Applied Ballistics software APP that contains bullet databases and allows you to enter key information such as muzzle velocity, bullet BC, zero distance, velocity, wind, and environmental factors (altitude, temperature etc.). There are also gun-specific factors such as scope height over bore and barrel twist rate. The video also explains how “range cards” are created and how to view them with your Elite Ballistics-enabled Kestrel. John notes: “The APP is great because you don’t have to fiddle with the Kestrel’s buttons. It’s much easier to enter data and change settings with the APP.”
This Part III video shows how to determine true wind direction by aligning the SIDE of the unit into the wind. You essentially want to set the unit 90 degrees to the wind direction so the impeller runs as slowly as possible. Then, after you set your target distance (See 3:03), the unit can give you precise come-ups for your intended target (10.28 MOA for 559 yards here). The Kestrel then calculates the cross-wind correction as well (See 3:12).
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, the video author may receive a small commission. This helps support F-Class John’s YouTube channel and allows him to continue to make videos like this.
It’s great to be able to access online load data for your cartridges. You can quickly get load data for a particular powder and bullet weight. However, there are times when we prefer to consult old-fashioned printed/bound load manuals. The primary reason is that manuals produced by bullet- and tool-makers will, for a particular cartridge, include data for powders from multiple manufacturers. Having a single source can save you time and trouble. For example, if you want to find 6.5 Creedmoor loads using H4350 (Hodgdon), Reloder 16 (Alliant), and N150 (Vihtavuori) you would have to visit three different powder-maker websites, one after another. OR you can pick up a modern load manual and find everything in one place.
There are many excellent printed load manuals on the market. We have used the Berger Manual, Sierra Manual, Speer Manual, Lyman Manual, and Hornady Manual. We like the Berger and Sierra manuals for match rifle cartridges, and the Lyman and Hornady manuals for hunting loads and pistol cartridges. Unfortunately, the popular binder-format Sierra Manual is currently back-ordered. Get one if you can.
The Lyman Reloading Manuals have earn praise over the years:
“Every other reloading book I’ve used favors their own bullets over every other manufacturers. With Lyman you get an honest representation of a wide variety of different… manufacturers. [Lyman has] a ton of reloading data on just about any bullet style you can imagine. I’ve tried a wide range of their recipes and everyone I’ve tried has been spot on. The overall breadth of information this book covers is impressive.” Review by RangetoReal.com.
Nosler #9 Manual Features New Cartridges
If you are looking for up-to-date cartridge/bullet/powder information, in late 2020 Nosler released the Nosler Reloading Guide #9, the latest in a respected series of Nosler load manuals.
This 800-page guide covers 101 cartridge types. New in this edition you’ll find the popular 6mm Creedmoor, 6mm XC, 6.5 PRC, and 7.62×39, along with 20 Nosler, 22 Nosler, 24 Nosler, 27 Nosler and 33 Nosler. This manual is a good resource for PRS shooters and hunters. The Nosler #9 book draws from thousands of hours in the Nosler Ballistic Lab, along with the experience of many respected experts.
The book is available for $28.99 at Midsouth or $29.95 on Amazon. Keep in mind that much of the book’s latest load data is available for free on the Nosler.com online LOAD DATA Center. But to get ALL the data, PLUS all the technical articles, you’ll need to buy the book.
Along with the new Nosler #9 Manual, here are four other recommended Reloading Manuals:
Here Are Four General Instructional Books That Cover Reloading Procedures:
POWDER BURN RATE TABLE
Here is the most recent powder burn rate chart from Hodgdon/IMR that we could find. Click links below to access printable PDF. Note, some readers have suggested a couple powder ranking issues in the table. However, this is the latest official version from the IMR website, released in November 2019.
20-Year-Old William Shaner just won the USA’s second Gold Medal at the 2021 Tokyo Olympics. The University of Kentucky marksman captured Gold in the 10-meter (10m) Air Rifle, setting an Olympic record in the process. Shaner scored 251.6 points in the 10m final to set a new Olympic Record that’s just 1.2 points shy of the world record. Will scored 10.5 or above on 13 of his 24 shots in the final. At the Tokyo Games, William was shooting a Walther Air Rifle.
William hails from Colorado Springs, Colorado. He started his shooting career at age nine in a 4H program in the appropriately named town of Rifle, Colorado.
Watch Will Shaner capture Gold with a stellar shooting performance, broadcast by NBC Sports:
CLICK HERE for Yahoo News Video about William Shaner Gold Medal in 10M Air Rifle.
Young Will Shaner Was Calm After Record-Setting Victory USA Today reported: “Will Shaner reacted like someone who could not wrap his head around the idea he’d won a Gold Medal. There were no yells, no fist pumps, no jumping, as Shaner captured U.S. Shooting’s first-ever Gold Medal in the men’s 10 meter air rifle. Hardly a wave, even. If he was smiling, you couldn’t tell, as a massive Nike Team USA mask covered almost his entire face.
“Still trying to believe it”, he said afterward. “It’s been a long time, though, growing up in the sport, progressing. To finally have (the gold medal), it’s amazing.”
“Yesterday, [was] a little bit of a slow start for everyone,” he said, as Team USA went without a medal on the first day of competition for the first time in nearly 50 years. “Today, to (help) finally get it moving, it’s amazing. It’s really an honor.”
Will Shaner Becomes Social Media Star After Winning Gold Medal
Team USA Tweeted news of Shaner’s Gold Medal-winning performance to fans around the world. Because Will set a new Olympic Record, one respondent called him the “GOAT” (greatest of all time). Well, that may be hyperbole, but Shaner did achieve the greatest 10m Air Rifle final score in Olympics history.
20-year-old Will Shaner earned the second Gold Medal of the Tokyo Olympics for the United States. Will, who hails from Colorado Springs, CO, won the men’s 10-meter air rifle on Sunday with a final round score of 251.6 at the Asaka Shooting Range, edging out China’s Sheng Lihao, 16, by 0.7. China’s Yang Haoran took the bronze medal, finishing just 0.4 behind Sheng.
— Shaner set a new Olympic record with a score of 251.6
— The 20-year-old is a mechanical engineering student at the University of Kentucky
— The silver medal winner, Sheng Lihao of China, is only 16 years old
— Shaner’s victory was the first Gold Medal ever won in this 10m event by the United States
— Shaner first started his marksmanship training at Age 9 at a 4H Program in Rifle, Colorado
Watch Shaner Win Gold and stand on podium on NBC4 New York: CLICK PHOTO to watch video on NBC 4 New York.
Will Shaner — From Colorado, to Kentucky, to Olympic Glory
William is one of two University of Kentucky (UK) Rifle athletes competing in the Tokyo Olympics. As one of the nation’s top prospects coming into college, he was named NCAA Rookie of the Year his freshman year and was an All-American First Team member in air rifle and smallbore. William finished second in the NCAA Air Rifle individual championship in addition to winning the team gold with Kentucky his sophomore year. He repeated this exact feat with again with UK his junior year.
Will has done well in international competition. Shooting Sports USA noted: “Foreshadowing his Olympic performance … earlier this year Shaner won a gold medal at the ISSF World Cup Croatia.”
William started in shooting sports when he was 9 years old at a small 4-H program in Rifle, Colorado. From there, he moved on to shooting monthly preliminary tryout (PTO) events at the Olympic and Paralympic Training Center until he could start qualifying for major matches. He won his first Junior Olympic Gold Medal at age 11 in 50m prone and made the Junior National Team at age 14 which propelled him into the international circuit. Fast forward less than a decade and William is, according to known USAS records, the youngest U.S. Men’s Olympic Rifle Qualifier.
William Shaner also shoots Smallbore Rifle (.22 LR) for the University of Kentucky: CLICK PHOTO to view full-screen image of Shaner with Bleiker .22 LR Rifle.
Driven by the pursuit of perfection and appreciation for his small-town roots, Will strives to be a role model for the next generation of shooting athletes. He credits his successes to coaches and support from the National Training Center Shooting Club (NTCSC), USA Shooting, and the University of Kentucky.
Team USA Rifle Shooters at 2021 Tokyo Olympics
USA Shooting has sent 20 Olympians to the Tokyo Olympic Games to represent the United States in the able-bodied shooting sports (there is a separate Paralympic shooting team). Our athletes have earned 8 quotas for the shotgun disciplines, 8 quotas for the rifle disciplines, and 6 quotas for the pistol disciplines (22 total). Here are the 8 Rifle Competitors, the four Air Rifle shooters and four Smallbore shooters:
Looking for a match-worthy PRS/NRL rig for under $1750.00? Check out Savage’s Elite Precision Model 110. GunsAmerica Digest recently did a very thorough test of the 110 Elite Precision, declaring that this modern Savage is “Competition-Ready Out of the Box.” The Savage’s $1750 price is well under the PRS $2500 Production Division limit.*
Is this an outstanding deal at $1750? Absolutely. Consider this, the recently-released Proof Research MDT Chassis Rifle, which shares the SAME MDT ACC Chassis, has a $5699.00 MSRP! For that amount of hard-earned cash, you could buy THREE Savage Elite Precisions AND have $449 left over ($1750 x 3 = $5250)! Put the $3949 saved into optics and reloading gear (or a couple mortgage payments).
The Savage 110 Elite Precision has many notable features:
1. Modular Driven Technologies (MDT) Adjustable Core Competition (ACC) Chassis
2. Trigger adjusts from 1.5-4.0 pounds
3. Barrel comes with timed muzzle brake from factory
4. MDT ACC Chassis easily accepts Weights and Accessories
5. Takes AICS-compatible Magazines
6. Titanium Nitride coated bolt body
This rifle boasts an excellent MDT ACC modular chassis. GunsAmerica stated: “Combined with the excellent trigger, an AR-compatible vertical grip, flared magazine well, and AICS mag system (along with a host of additional features), the 110 Elite Precision comes with everything you need [for PRS/NRL matches].” The stock has ARCA rails on the fore-end and M-LOK mounting points for accessories and/or weights. You can add an additional 9 pounds of steel to customize the balance/mass of the rifle to improve stability and minimize recoil.
The Cheekpiece and Buttpad are adjustable, along with Length of Pull (LOP).
Another reviewer noted that the 110 Elite Precision has important accurizing tweaks from the factory: “Key upgrades include a blueprinted action … Savage squared the receiver face and cleaned up the receiver threads to ensure they’re concentric with the barrel’s bore. This combination goes a long way in eliminating the occasional flyer that can ruin a good group or cause a miss in a match.” Source: GunsandAmmo.com.
Accuracy with Factory Ammo
What kind of accuracy can you expect? Decent for a factory barrel and factory ammo. With Hornady 6.5 Creedmoor ammo, shooting off a sled, the test rifle delivered 1.1-MOA average groups. We would expect considerably better accuracy using a proper front rest with a bag-rider fitted to the fore-end. Likewise, the gun would almost certainly shoot better with handloads with Lapua brass and Berger bullets. Handling was good: “The Elite Precision is about as shootable as it gets. The 12.6-pound rifle produces very little recoil with the 6.5 Creedmoor cartridge, and … the ACC chassis can be weighted to control recoil even further.” NOTE: We have discussed accuracy with other Savage 110 Elite Precision owners, who have reported considerably better accuracy. But as with most large-maker factory rifles, the accuracy of the barrel is unpredictable. If you want a half-MOA guarantee, you’ll need to spend more (see footnote).
Actual owners have been impressed with the 110 Elite Precision. One buyer posted: “You couldn’t build a complete PRS rifle that is this good of a platform for even close to the price!” GunsAmerica tester Jordan Michaels concurred that this rig is a great choice for PRS/NRL factory-class: “If you’re in the market for a rifle to compete in a long-range competition, the Savage 110 Elite Precision is an excellent choice.”
Here is a detailed examination of the Savage Elite Precision in 6mm Creedmoor:
* The PRS “Production Class” price limit is now $2500.00 as stated in the 2021 PRS Rulebook (Rule 2.3.1). To qualify as Production Class, the rifle must have that manufacturer’s stamp on the barrel, so you can’t cheat and slip a Krieger or Bartlein on the Savage (Rule 2.3.11). Another under-$2500 alternative is the newly-introduced MasterPiece Arms MPA BA PMR Pro Rifle II (Product Match Rifle) priced at $2499.00. This rifle, which comes with a Half-MOA Accuracy Guarantee, has been approved for use in PRS Production Division. The MPA includes many competition-related features while staying under the $2,500 price limit for this class. It is available in either a Black or Tungsten Cerakote® finish. It uses a MPA/Curtis Short Action with Lothar Walther hand-lapped barrel. MORE INFO.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Amazon — LongShot LR-3 Target Camera System, $724.08
⏺ Best Long Range Target Camera you can buy — save $75 now
This superb Longshot LR-3 Camera system combines a high-definition camera with a special receiver. This set-up delivers sharp, live images at distances up to two miles with excellent 2688 x 1512 HD resolution. Integrated software lets you mark your shots. This is a good deal — other vendors are selling the LR-3 for $799.00. NOTE: If you want the BulletProof Warranty, we recommend you buy direct from LongShot. You can get the LR-3 System WITH Warranty for $838.00. We do recommend purchasing the BulletProof Warranty — that way LongShot will repair or replace your unit if it is damaged by gunfire or other hazard.
2. Midsouth — LEE 60th Anniversary Challenger Kit, $197.58
⏺ Excellent kit with Press, Priming Tool, Powder Measure, and much more
It’s been a while since we’ve seen reloading gear both in-stock and at reasonable prices especially for starting kits. Check out this LEE 60th Anniversary Challenger Kit which features a Breech Lock Challenger Press with Large and Small Primer Lever Arms, Deluxe Perfect Powder Measure, Safety Powder Scale, Modern Reloading 2nd Edition, Deluxe Quick Trim, Bench Prime, Priming Tool Shell Holder Kit, Case Conditioning Kit, Powder Funnel and some Lee Case Lube. This is really a great starting kit for anyone looking to get into reloading and probably won’t last long. This is great bargain — the Press alone is worth $100, and the priming tool and powder measure both worth very well.
3. Brownells — Blackhawk Gun Case and Holster Sale
⏺ Significant discounts on quality Gun Cases, Mats, Holsters
If you’re in the market for shooting gear head over to Brownell’s for their sitewide Blackhawk Sale. Blackhawk has been an industry leader for decades and for good reason. They make everything from gun cases to holsters to slings. With this sale, you’ll find significant discounts on very good gun cases, and we like the multi-functional Blackhawk Stalker Drag Mat. This double-duty item works as a rifle carry case AND a padded shooting mat — great product.
4. Roger’s — Federal XM193 5.56x45mm Ammo, 400rd $279.99
⏺ Quality mil-spec AR15 ammo at good price with ammo can
Bulk .223 Rem (5.56×45) ammo has been hard to find these days at reasonable prices. But Roger’s Sporting Goods now has Federal XM193 5.56×45 ammo on sale. Get 400 rounds of 55gr XM193 NATO Rifle Ammunition for just $279.99 ($.70/rd). This is high-quality, ultra-reliable new production ammo shipped in a military-grade metal ammo can. XM193 is rated at 3165 FPS.
5. Sportsman’s WHSE — Savage 6.5 CM Rifle + Scope, $359.99
⏺ With scope included, it’s like getting rifle for $220!
Here’s a stellar deal on a decent 6.5 Creedmoor hunting rig. Get the rifle PLUS the scope for just $359.99. Sportsman’s Warehouse is selling the Savage Axis XP Scope Combo for only $359.99. The rifle comes complete with a Bushnell 4-12x40mm scope. The rifle boasts a rugged black synthetic stock and is fitted with a carbon steel, 22″ sporter-contour, button-rifled barrel chambered in 6.5 Creedmoor. This package rifle is ready to shoot, right out of the box, thanks to the mounted and bore-sighted Bushnell optic.
6. Amazon — EZ-Aim Targets, Grid or Bullseye, 13pk $1.46/$1.49
⏺ Incredible deal on 13-packs of Grid or Bullseye targets
This may be the deal of the year on quality targets. Why print targets at home and waste your ink when you can pick up a 13-pack of these EZ-Aim Sight-in Grid Targets for only $1.46! These are nicely sized 12″x12″ grid targets with a large center bull and 4 other orange aim points in the corners. These targets are great for sight-in and/or load development as the 1″ grid provides a quick reference for scope clicks and group sizes. If you prefer multiple small bulls, try the EZ-Aim 11-Spot Target Pack. There are 11 orange bulls on each 12″x12″ sheet. A 13-pack costs $1.49.
7. EuroOptic — 15% OFF Holosun Sights
⏺ Significant 15% discount on All Holosun Sights at EuroOptic.com
It’s hard to deny the impact that holosights have had on the pistol market. They’re lightweight, easy to use. and help shooters get on target faster and more accurately than ever. If you looking to upgrade a pistol, consider Holosun sights. Right now, at EuroOptic, you can get 15% off with code HOLO15. Features include Holosun’s Green Super LED with up to 50k hours battery life, Multi-Reticle System, Solar Failsafe, and Shake Awake.
8. Graf & Sons — Nikon Laser Rangefinder Sale
⏺ Good, reliable basic rangefinders on SALE 12-22% Off
Knowing how far you’re shooting is critical both when hunting and target shooting. Thankfully, you don’t need to spend big money on a Laser rangefinder. Right now Graf & Sons has slashed prices on Nikon Laser Rangefinders. There are a variety of models starting at just $149.95 for the Prostaff 1000 6x20mm. The yellow body Forestry Pro II model can range and then display the angles of multiple targets.
9. Amazon — Front and Rear Shooting Bags Set, $12.92
⏺ Handy low-cost bags for varmint work or NRL22 competitions
Sometimes all you need is a simple front bag rest and squeeze bag in the rear and we found a great deal. These bags will suffice for basic varmint duties, sight-in for a hunting rifle, or barricade work in an NRL22 match. The Ace Hunter Front and Rear Bag Combo is available in 3 colors (Black, Green, and Camo). For just $12.92 you get both front and rear bags, which can be linked for transport.
These bags ship unfilled so must add your preferred fill material (depending on application) — try lighter fill such as rice for field carry, with heavier sand for bench work.
The anvil is the tripod-shaped thin metal piece protruding above the bottom of the primer cup. Getting the primer sitting fully flush on the bottom of the case primer pocket, without crunching it too much, requires some keen feel for the progress of primer seating.
Sadly, Glen Zediker passed away on October 1, 2020. But his technical insights and helpful advice live on thanks to his written works — his books and articles. In two informative Midsouth Blog articles, Glen Zediker presented helpful advice on priming. First he examined what happens to the primer itself as it is seated in the cup. Glen then explained why some “crush” is important, and why you never want to leave a high primer.
Glen also reviewed a variety of priming tools, including his favorite — the Forster Co-Ax Bench Primer Seater. Then he offers some key safety tips. Glen provides some “rock-solid” advice about the priming operation. You’ll find more great reloading tips in Glen’s Top-Grade Ammo book.
Priming Precision vs. Speed
Glen wrote: “The better priming tools have less leverage. That is so we can feel the progress of that relatively very small span of depth between start and finish. There is also a balance between precision and speed in tool choices, as there so often is.”
Benchtop Priming Tools — The Forster Co-Ax
Glen believed that the best choice among priming options, considering both “feel” and productivity, may be the benchtop stand-alone priming stations: “They are faster than hand tools, and can be had with more or less leverage engineered into them. I like the one shown below the best because its feeding is reliable and its feel is more than good enough to do a ‘perfect’ primer seat. It’s the best balance I’ve found between speed and precision.”
Load Tuning and Primers
Glen cautioned that you should always reduce your load when you switch to a new, not-yet-tested primer type: “The primer is, in my experience, the greatest variable that can change the performance of a load combination, which is mostly to say ‘pressure’. Never (never ever) switch primer brands without backing off the propellant charge and proving to yourself how far to take it back up, or to even back it off more. I back off one full grain of propellant [when I] try a different primer brand.”
Priming Safety Tips by Glen Zediker
1. Get a good primer “flip” tray for use in filling the feeding magazine tubes associated with some systems. Make double-damn sure each primer is fed right side up (or down, depending on your perspective). A common cause of unintentional detonation is attempting to overfill a stuffed feeding tube magazine, so count and watch your progress.
2. Don’t attempt to seat a high primer more deeply on a finished round. The pressure needed to overcome the inertia to re-initiate movement may be enough to detonate it.
3. Keep the priming tool cup clean. That’s the little piece that the primer sits down into. Any little shard of brass can become a firing pin! It’s happened!
Berger-sponsored shooter Ken Sanoski claimed the top spot at the 2021 Hornady Precision Rifle Challenge (PRC) Match, winning the Open Division with the highest overall score. The 2021 Hornady PRC event was held July 9-10 outside of Evanston, WY on Hornady’s private ranch. Sanoski competed with an Exodus rifle chambered in 6mm Dasher with Berger 109gr Long Range Hybrid Target (LRHT) projectiles loaded in Lapua brass (fire-formed to 6mm Dasher).
“The Hornady PRC precision rifle series was exactly what you expect from a national-level 2-day match. Strong winds, small targets, and a stacked field of shooters”, commented Sanoski. “My Exodus Rifles in 6mm Dasher using Lapua fire-formed brass and Berger 109gr LRHTs were the winning combination to put me at the top of the leaderboard.”
Berger’s Long Range Hybrid Target projectiles feature an optimized hybrid-ogive design which easily tunes to your rifle, offers superior exterior ballistics, and high Ballistic Coefficients (BCs). Berger BCs are Doppler-verified with less than 1% BC variation. That verified BC helps make ballistic calculations ultra-precise for a high hit percentage.
6mm Dasher — A Winning Wildcat
The 6mm Dasher has long been a winning wildcat in the 600-yard and 1000-yard benchrest game. This efficient 6mmBR Improved cartridge, with a 40-degree shoulder, has also been adopted by many top PRS/NRL shooters.
The Dasher, quite simply, offers a winning combination of accuracy, low ES/SD, and moderate recoil. You can run a 105-109gr 6mm bullet at a very accurate 2950 fps node (or even higher in some barrels). And with its 40-degree shoulder, the brass is very stable. The cartridge that wins in benchrest now also wins in PRS.
The only downside to shooting a 6mmBR or 6 Dasher in PRS/NRL were issues with magazine-feeding due to the relatively short Cartridge OAL, compared to a 6mm Creedmoor or 6XC. Thankfully, that feeding issue has been solved via dedicated shorter-length actions and redesigned magazines.
As the practical/tactical game has evolved, with low recoil and high accuracy becoming ever more important, many top competitors have moved to smaller cartridges such as the 6mm Dasher and its parent, the 6mmBR Norma. These cartridges deliver outstanding accuracy plus good barrel life. However, the “short, fat” 6BR/Dasher design doesn’t feed optimally in magazines designed for the .308 Win family of cases. But now there is a turn-key solution from MDT (Modular Driven Technologies) — a magazine perfect for 6BRs and Dashers.
MDT Magazine for 6 Dasher, 6mmBR and Short Cartridges
MDT’s 6mm Dasher/BR magazine fits the parent 6mmBR cartridge and all the popular variants including the 6 BRA, 6 Dasher, and 6 BRX. MDT says this new 12-round magazine is a “one-step solution [delivering] smooth, reliable feeding for the most popular rifle cartridges in precision rifle competitions.”
MDT built this AICS-pattern mag for PRS/NRL competitors and anyone wanting to run 6mmBR-family cartridges in mag-fed actions: “The limiting factor for competitors running 6mm BR variants has been feeding. Until now, the only option has been to purchase an AICS-pattern magazine plus an additional kit to make the magazines work with the shorter cartridges. This solution costs upwards of $100 or more and can require additional tuning to work in most rifles.”
If you can’t afford MDT’s complete $89.99 6mm/Dasher AICS magazine, you can get a mag conversion kit from Primal Rights for half the price — $45.00. This is offered in 4+1 round or 10-round versions. Primal Rights states: “The 6BR AICS Magazine Conversion [delivers] reliable feeding of short standard bolt face cartridges such as the 6BR, 6.5 Grendel, 6 Dasher, and 6BRX. If you have ever tried to run a 6BR [or Dasher] out of a standard un-modified AICS magazine, you were probably met with the same disappointment the rest of us were… unreliable feeding.”
The Primal Rights 6BR AICS Mag Conversion Kit has been tested extensively with 6BR, 6.5 Grendel, 6 Dasher, and 6BRX. For these short cartridges, Primal Rights has logged “thousands of rounds of trouble-free operation” with the Mag mod kit.
6mm Dasher Rifle Takes F-Open Title
Drew Rutherford put on a strong performance to win the F-TR Mid-Range Championship. Rutherford was using Eliseo R1 Tubeguns fitted with SEB JoyPod coaxial bipod. Chassis-maker Gary Eliseo noted: “Congratulations to Drew Rutherford, national midrange FTR champion! Drew used his .223 Rem and .308 Win R1 rifles to win the Mid-Range Championship, well done Drew!”
Nosler #9 Manual Features New Cartridges
20-year-old Will Shaner earned the second Gold Medal of the Tokyo Olympics for the United States. Will, who hails from Colorado Springs, CO, won the men’s 10-meter air rifle on Sunday with a final round score of 251.6 at the Asaka Shooting Range, edging out China’s Sheng Lihao, 16, by 0.7. China’s Yang Haoran took the bronze medal, finishing just 0.4 behind Sheng.
Sometimes all you need is a simple front bag rest and squeeze bag in the rear and we found a great deal. These bags will suffice for basic varmint duties, sight-in for a hunting rifle, or barricade work in an NRL22 match. The 
The 6mm Dasher has long been a winning wildcat in the 600-yard and 1000-yard benchrest game. This efficient 6mmBR Improved cartridge, with a 40-degree shoulder, has also been adopted by many top PRS/NRL shooters.
